Browse by Faculties

Monograph

The construction of driveway / Izzat Farhan Mohd Razali. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The installation method of u-beam and box girder / Nur Aqilah Zolkefli. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Slope stabilization / Aina' Wahida Imran. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Post concrete work / Amir Hamzah Rashid Ridha. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Piling works: Jack in piles / Ariff Irwan Asmawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Management and supervising of mechanical and electrical work at Phase Two The Havre Bukit Jalil / Azad Bukhari Aziz. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Progress claims and site valuation / Syazatul Aliya Shamsudin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of pad foundation / Muhammad Zulhadzhim Md Sharif. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation methods of precast concrete beams & columns, Campus UniSZA Tembila, Besut / Zakaria Abd Hamid. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Implemantation of industrialized building system / Ahmad Hafiz Hizri Zulkefli. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Post contract work during defect liability period / Nursyahirah Yusri. (2019) Industrial Training. Universiti Teknologi MARA, UiTM Perak. (Submitted)

Installation of skillion roof / Nurul Hanis Hadi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

A case study of spun pile / Fatimah Atifah Seyed Mohamed Mohamed Nazim. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of standard pier / Nur Ainin Sofiya Mohamed Sufian. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Perimeter wall and gate / Tuan Muhammad Afif Husaini Tuan Asmawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Ground beam construction process of Complex Islam Pasir Puteh, Kelantan / Siti Nur Atira Mohd Nasir. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Failure in construction and its rectification at Riana South Condominium / Suaidah Shima Shahrin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method installation of precast concrete pile using hydraulic injection (Jack-In Pile) system / Muhammad Amir Syahmi Sukhairul. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Leaking: the failure of design / Muhammad Abduh Almubarak Mohammad Shukor. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of reinforced concrete slab at Riana South Condominium / Qamarul Azarin Rusli. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of floor finishes / Nurul Izzah Mohd Nawawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Substructure in Raub biomass power plant / Ahmad Fikri Saipuzzaman. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Invitation to tender / Izhar Hairee Zawawi. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of pad foundation / Nur Naimie Nadjwa Khairuddin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Restoration of roof and ceiling / Muhammad Faiz Ahda Khairol. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of pad footing at Gong Pauh, Kemaman, Terengganu / Nurul Afina Abdullah Khari. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Steel structures / Nurul Zafirah Jamaluddin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Substructure construction method / Muhammad Haziq Zainul Rashidi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Roadwork construction / Muhammad Azwan Arash Wan Salman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The installation of deep foundation (pile) using jack in machine / Mohd Asyraf Mohd Rozaidi. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Fabrication and installation of steel truss / Mohammad Firdaus Mohd Ismail. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Static load test for spun pile piling / Mohamad Fazrul Arhan Mohamed Shaharudin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The installation of column and beam for the construction of two storey hangar building / Nur Amira Syuhada Mohamad Salleh. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of asphalt road in flexible pavement / Nur Syahira Muhd Zailani. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of pad footing for semi-detached houses project / Farah Husna Azmi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction process of precast reinforced concrete of frame structure for Industrialised Building System (IBS) / Muhammad Aminuddin Kamarul Zaman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Repair works on foor and wall / Muhammad Daniel Hakim Eddy Azuan. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Storage tank erection / Muhammad Haikal Haziq Abdul Halim. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Drainage work / Ahmad Faris Hakim Azrin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Process brickwork at the construction site (wall construction) / Yusrizal Aizat Mohd Yusoff. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Superstructure work of astaka / Muhammad Hafizi Rosiman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction process of superstructures for a single storey house / Sarah Nadhirah Nize. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Underground piping installation at the construction site / Nurul Sarah Mohamad Sinatra. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of drainage / Muhammad Azmil Rosli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Maintenance work at Kuala Lumpur International Airport / Nur Adlin Khairina Azewan. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of flat roof on 27-storey serviced apartments in Utropolis Batu Kawan, Penang / Kamarul Asyraf Kamarulzaman. (2018) Industrial Training. Universiti Teknologi MARA , Perak. (Submitted)

Tendering process for Cadangan Menaiktaraf Laman MBPJ Dan Kerja-Kerja Berkaitan Untuk Tetuan Majlis Bandaraya Petaling Jaya / Nur Ain Syahira Asri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Post tensioned slab system / Nurul Hazirah Abdul Halim. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of central air conditioning system / Muhammad Zaieful Danial Mohd Zaidi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of substructures / Norshahira Che Soh. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Plasterboard gypsum ceiling finishes at Tijani Ukay, Ampang / Muhammad Fakhrul Fu'ad Amir Ridza. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of retaining wall for onsite storm water detention pond (OSD Pond) / Izzah Nur Imanina Ahmad Safawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Compliance of documents in draft for authorities approval / Enaz Amani Ezali. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Building defect management: a case study at The Havre, Bukit Jalil / Muhamad Afiq Hakim Shamsul Anuar. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Temporary work systems used for concrete frame construction / Nur Asmeehan Abu Bakar. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction for structure of single storey terrace house (Slabs, ground beam, roof beam and columns) / Muhammad lrfan Syarqawi Sulaiman. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of steel framing system for Project Pembangunan Program Khas Perumahan Perwira Negeri Perak (PKPPNP) bagi Daerah Manjung, Negeri Perak / Nurinfarzana Syafiqah Salpian. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of finishes in a unit of high rise condominiums of the Henge, Kepong Kuala Lumpur / Muhammad Faiz Zakaria. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of fire door and high security lockset at IPK Perlis project / Ahmad Syahidi Bokhri. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Beam, slab and shear wall construction / Muhammad Abdillah Mohamad Nor. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of pre-bore spun pile / Nor Sharfieza Nor Shamsul. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defect studies during defect liability period / Muhammad Aliff Imran Suardi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of pile cap for double storey house renovation / Khairul Azhar Zainul Rashid. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of raft foundation / Mohammad Faqhrul Adzmi Khairuddin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction for Ismail Petra Mosque extended building / Norhafizai Daud. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Investigation of defects during liability period / Azfar Danial Isyraf Anuaridhuan. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction method of soil improvement for new surau of Taman Anika, Batu 9, Port Dickson and other related works / Norhikmah Ieman Baharudin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction method of pre-boring works and spun pile installation at PTD 182919, Bukit Indah, Johor Bahru / Wan Mohd Danial Wan Najmi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of raft foundation / Muhammad Adam Azrai Abdul Rahman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of bored pile (substructure) for condominium Trinity Pentamont, Mont Kiara / Wan Nurelly Nazjiha Mohd Nor. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method of rectifying defects (flooring, wall crack and window leaking) / Nik Afif Haziq Nik Noor Ahmazukee. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Road construction / Muhammad Izzaidy Zikry Roslan. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method installation of fencing works / Muhammad Shahrul Syazwan Bajuri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Certification of completion and compliance of cadangan sebuah gudang 1 tingkat di Jalan Perigi Nenas 8/7 Taman Perindustrian, Pulau Indah, Pelabuhan Barat, Klang / Muhammad Aqmal Ziqri Mohd Najib. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Arch / Darren Tan. (2015) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of floor and wall finishes for bathroom at Apple 99 Hotel / Siti Noor Aida Samsuri. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Retaining wall / Nur Fatin Azini Mohd Zulkifli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction method of leachate water collection drain / Nur Najwa Natasya Muhamad Nasri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

External cold water supply system / Ahmad Razlan Alif Zuraimi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Superstructure work Industrial Building System (IBS) / Muhammad Izwan Izzuddin Hamidin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of RC pile for double storey semi-D houses / Nursyamimi Asyiqin Ahmad Nizam. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Concrete crossing slab as cover or closing for drainage at residential area / Saiful Hakim Fazal. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Load bearing masonry wall construction / Nur Fakhira Mohd Allif Effendy. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Reinforced concrete wall using steel formwork / Muhamad Khairul Nizam Mahmood. (2019) Industrial Training. Universiti Teknologi MARA, Perak +. (Submitted)

Concrete mansory unit: characteristic, method, advantages and disadvantages installation / Nur Haziqah Izzati Khairilanuar. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

MoU Between Alor Gajah Municipal Council and Universiti Teknologi MARA. (2018) Other. Pejabat Jaringan Industri, Komuniti dan Alumni (ICAN), Shah Alam. (Unpublished)

Method installation of road sign and accessories / Fawwaz Ikmal Iqbal. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Tendering process / Hafizuddin Kaiben. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Green Building Index (GBI) certification for Damansara - Shah Alam elevated expressway’s toll plazas / Muhammad Lukman Hakim Ahmad Shahrul Nizam. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Dilapidation survey for bungalow and semi-d houses at Pontian, Johor / Muhamad Syafi Daniel Afifuddin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Construction of brickwork (load-bearing wall) for worker’s quarters / Muhammad Syahmil Afiq Rozzaieman. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Piling test / Muhammad Zikry Mohd Sabri. (2021) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of covered walkway at Jalan Hang Jebat infrastructure at PNB 118, Kuala Lumpur / Muhammad Zulfadzli Shamsulanizam. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Finishes work at water features roundabout / Muhammad Nur Aiman Hakimi Mohd Hanafiah. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Blockwork laying an AAC block / Muhammad Zulhaziq Zulkurnain. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Tender strategies of the Putrajaya 8md3-infrastructure development package / Nabihah Mohd Yazid. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Conventional water treatment plant in Karak, Bentong district, Pahang Darul Makmur / Nafhatun Jahirah Mohamed Azri. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Microsoft programming, the process of making Gantt Chart / Nazri Mohd Ass’ri. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Method of beam launching for East Klang Valley Expressway (EKVE) bridge / Nik Mazni Iryani Nik Mansor. (2021) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction process of pad footing for 1 unit semi detached house / Nik Mohamed Syahmi Nik Mohamed Shaifuddin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

The process and maintenance of a residential houses of Presint 10, Putrajaya / Nik Najwa Nik Fazri Namili. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Tiles finishes / Nizam Hairi Hussin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Contract administration for the construction of a bungalow house in Asam Kumbang Taiping, Perak Darul Ridzuan / Noor Fatehah Idris. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

The repairing construction of badminton court / Nor Farzana Abdul Ghafur. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

The installation of reinforced concrete slab / Nor Haifa Nor Lizan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

The renovation design process / Nor Hidayah Nor Hesham. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Road maintainance / Nor Najihah Mohd Nasir. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Industrialised building system (IBS): interlocking solid panel / Nor Wardina Yaakob. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Installation of ceramic tiles / Norain Syuhada Zulhime. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Site safety and health / Norazza Miza Ahmad Zuhudi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Wall material used for a two-storey house at Parit Haji Talib (AAC block and sand lime brick) / Nur A’reesyia Mardhiah Norazemi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Tendering process / Nur Afifah Syahril. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Preliminary work at construction site / Nur Aiman Su’aidi Abu Bakar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Preparing A Vacant Possession for M1 MSN Development Sdn. Bhd. / Nur Ain Darwisyah Mohd Saufi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction health and safety management for the construction of public toilet in Rembau district / Nur Aina Nasuha Muhamad Shah. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Roof renovation process / Nur Aliah Abd Hadi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Tender process of the Putrajaya 8md3- infrastructure development package / Nur Alisa Sofia Mahadzir. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Dilapidation survey and inspection at Sentul Kuala Lumpur / Nur Alyaa Mohd Alkusari. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Building condition assesment / Nur Alysha Nor Azham. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Implementation of green 5s manual in construction work at Perla Ara Sentral Site / Nur Amirah Roslim. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Method of piling constructions (timber mangrove pile) / Nur Anis Farzana Zulkiflee. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation of roof / Nur Anis Nadhirah Zulkefly. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

The procedure of building plan approval for factory / Nur Arisa Saifullizan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Dilapidation and repairing works / Nur Arisha Abd Rahman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Project tender: soil investigation Taman Tangkak Emas - Fasa 3 / Nur Atira Jamaluddin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Kitchen renovation works / Nur Azlina Azizan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Building plan approval process / Nur Azreen Mohd Zurab. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Bus stop construction and maintenance / Nur Dayana Firdaus. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Preparation of tender document / Nur Diana Sallehuddin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Method of reinforced concrete (column) / Nur Farzana Ayina Rahimie. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Installation method of unipaver interlocking paver / Nur Fatihah Murad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Procedures in selecting main contractor for open tender type / Nur Fatin Shahzleen Md Najib. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Industrialized building system (IBS) / Nur Fatin Syafiqah Mohd Hasni Hamizi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tendering process / Nur Habibah Abd Rahman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Unpublished)

Methodology of exterior facade design (wall screening) of a school / Nur Hajidah Shaharudin. (2020) Industrial Training. Universiti Teknologi MARA, Perak. (Unpublished)

Tiny house design proposal / Aimi Syamimi Azman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Assessment of detailed ceiling inspection due to the ceiling collapse at classroom / Alyani Izzati Mohd Zainal. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Project management of renovation works of a lecture class into a cyber secutiy lab at FSKM,UiTM Shah Alam, Selangor / Amalin Nur Fazirah Zairi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction work using aluminum formwork system at Viluxe Terrace House / Ammar Zikry Zakaria. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tender document preparation process: project of Masjid Terapung Daerah Yan, Kedah / Amni Amalia Mahadzir. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Building defect complaint issues in Vista Alam management / Amyrul Hanif Misrun. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Pre-dilapidation survey for infrastructure (road) at Bandar Sultan Suleiman, 42000, Port Klang, Selangor Darul Ehsan / Anis Sahira Baharuddin. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Implementation of quality management system (QMS) in construction project at Taman Belimbing, Jitra Kedah / Wan Amni Aizah Megat Abdullah. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Quality issues of food stall’s construction at recreation center, Kelemin’s River, Dungun, Terengganu / Asiah Nabihah Ishak. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Process of replacing a damaged waterproofing for D’Anjung Inn Hotel, Tangkak, Johor / Muhamad Nur Ikhwan Mohd Nooh @Mohd Noor. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Upgrading work on on floor tiles (toilet) at building department JKR Negeri Kelantan / Che Mohamad Shafiq Aiman Che Othman. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation of precast reinforcement concrete (RC) piles at Stadium Bola Sepak Kompleks Sukan Seri Manjung / Daniel Iskandar Hakimie Mohamad Roshidi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

Renovation guideline and process at Grandezza, Eco Sanctuary / Erfa Rauhah Shahril Anuar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Dilapidation survey report (during construction and completion of light rail train line 3 of phase 5 - area 1) / Farrah Nadhirah Mohd Azlan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

The building maintenance management in Ixora Hotel, Penang Malaysia for lighting system / Fitriyatul Amani Sulaiman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Procedures of tender for upgrading the hot spring at Tok Bok, Machang, Kelantan / Nurul Afifah Mohd Asri. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Certificate of completion and compliance (ccc) approval process for 2 units of 3 storey office shops at Mukim Tanah Merah / Hadfina Mirza Mohd Noor. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Method road construction process use bituminous premix / Hafizah Fitrah Abd Nasir. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The extension width of road within use pmc material and maintenance work on Parit 6 Kampung Paloh, Layang-Layang Kiri Mukim Bota / Hayati Khan. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Training module for house defect inspection for residential building: case study at Taman Kota Seribong / Nur Hidayah Maliki. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation procedure follow by house rules at the address condo, Bukit Jambul, Penang / Khairun Aina Mohamad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The implementation of indoor environment quality (IEQ) at public works department (PWD) jajahan Kota Bharu, Kelantan / Mimi Aqielah Hashim. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

New application process for bungalow housing project from early stage until issued of certificate of completion and compliance (CCC) at Batu 7 Lekir, Perak / Mohamad Fikrul Hakim Mohd Fadhillah. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance and facilities management of Kota Putera Square (KPS) / Mohamad Zuhairi Effendy. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Defect processess after vacant possession at Block B Vertu Resort, Aspen Vision City, Batu Kawan, Pulau Pinang / Mohammad Asyraf Ikhwan Helmi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The construction process of “Kolah Wudhuk” Masjid Bukit Tanah, Jabi, Besut, Terengganu / Mohamad Amerudin Mohd Zarawi. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building Information Modeling (BIM) Rumah Tok Su / Mohd Izzat Mohd Sham. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The construction of perimeter drainage pipe culvert for commercial centre for 2 unit building office and shop at Kuala Ping, Terengganu / Mohd Ridzuan Harun. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction project management implementation: case study on constructing and finishing 2 unit 1988 ft 2 semi-detached house at Mentuan / Muhamad Afnan Afiq Nazi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Conventional for drainage installation system at UMT education complex project / Muhamad Qadri Hidayat Abdul Kahar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The process of upgrading the Lata Janggut landscape / Muhammad Aashif Kamarudin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance on civil works at Hospital Yan, Kedah by UEM Edgenta Mediserve Sdn Bhd / Muhammad Afiq Zahari. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Recommendations for improvement based on fire incident case at Lot no. 4.18b (Relysis Computer), Level 4, Plaza Pelangi, Taman Pelangi, Johor Bahru, Johor / Muhammad Akmal Sugeng Triwahyono. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Proposed building and setting up 1 unit bungalow at Kampung Padang Kala, Melor, Kelantan / Muhammad El-Husairi Abdul Roni. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Architectural renovation works of the Deputy Vice-Chancellor's Office (Academic & International) on level 3, Chancellor's Building, Sultan Abdul Jalil Shah Campus (KSAJS), Universiti Pendidikan Sultan Idris, Tanjong Malim, Perak / Muhammad Iqbal Abdullah. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Connection cable service projects 11kv, 33kv and 132kv (workline engineering) / Muhammad Iqbal Khan Ibrahim. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Implementation of personal protective equipment (PPE) for safety aspect among labour in Bukit Kor, Terengganu / Muhammad Seri Afiq Azlan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance works for the common area at Seri Baiduri Apartment, Shah Alam, Selangor / Muhammad Zuhdi Ahmad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Qlassic audit and inspection: single storey house project at Seri Iskandar, Perak / Muhammad Zulhusni Dahlan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Process of preparing a tender document for state road in Jeli district / Muhammad Najmi Zulkifli. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Process of tender for a project of ‘kerja-kerja pembaikan & baik pulih bangunan (Sivil & Elektrikal) serta kerja berkaitan termasuk pagar keselamatan di Kuarters Polis Wakaf Mek Zainab, Kota Bharu, Kelantan / Najihah Mahfuzah Mazlan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building performance assessment (BPA) of JKR Selangor Mechanical Engineering Branch Office / Nik Nurul Syahirah Nik Mohamad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The procedures of development approval for public housing project 1 Malaysia / Nor Asmaniza Md Asam. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Road damages and maintenance procedures as per government guidelines in Majlis Daerah Lenggong, Perak / Nur Ain Nabilah Mohd Dahalan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Facility and maintenance management of Apartment Taman Sri Pinang Block A,B,C Butterworth Pulau Pinang / Nur Aina Yusrina Yusri. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Project management; monitoring and controlling setback at construction site Nizaha, Taiping / Nur Athirah Fatin Mohayidin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building condition assessment (BCA) of Jabatan Kerja Raya (JKR) Jajahan Kota Bharu, Kelantan / Nur Atikah Mat Nasir. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Vacant possesion for m1 residence project (28 unit double storey terrace houses) at Jalan Keruing 8/2, 43000 Kajang Selangor under MSN Development Sdn Bhd / Nur Atiqah Mohamed Aseri. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building plan approval for extension and renovation work for industrial building / Nur Azira Imron. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance works at Rumah Peranginan Persekutuan (RPP) Tasik Kenyir, Terengganu / Nur Azmah Afiqah Saidi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The waterproofing process of reinforced concrete flat roof on terrace house at Teluk Intan, Perak / Nur Farah Aina Hairul Anuar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction of floor for International School (Phase 2a), Horizon Hills / Nur Hafizah Youszelan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Method of piling and pilecap works on reclamation land / Nur Hakimah Fazil. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Toilet renovation / Nur Hanis Kamarudin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Industrialised building system (IBS) concept: lightweight brickwall installation / Nur Hidayah Mohd Fauzzy. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance management of Phileo Damansara 1/ Nur Husnina Zawari. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Railway track infrastructure / Nur Izyan Abdul Mukmin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Handling the process of user complaints through Facilities Management System (FMS) at UiTM Kedah / Nur Izzati Sharizan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building demolition at Ibu Pejabat Polis Kontijen (IPK) construction site Kuala Terengganu / Nur Maisarah Che Zakaria. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation of space for chocolate lab / Nur Malisa Mohd Nadjil. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Defect inspection of building element wall and floor for economic and commercial office Spain in Malaysia / Nur Nabila Natasya Ainna Mohmad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tendering process / Nur Natasya Mohd Isa. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

House renovation / Nur Nisa Syafiqah Nasir. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Road and drainage installation / Nur Qajwa Qashira Shamshul Kamal. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Floor finishes and installation synthetic sport flooring as finishes at Kompleks Sukan Hulu Terengganu / Nur Sabrina Ramlan. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Highway construction for Kuala Terengganu bypass / Nur Shafira Amira Mohamed Zaidi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation of IBS lightweight concrete panel wall / Nur Shahida Ramli. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The building maintenance works and practice for closed-circuit television (CCTV) at Ixora Hotel, Penang Malaysia / Nur Sufiyah Ismail. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

School’s building maintenance / Nur Syamimi Mustaffa Kamal. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tendering strategies for infrastructure works at Plot 8MD3, Precinct 8, Putrajaya / Nur Syazwana Sanaidi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Analysis financial of commercial property in Arte Mont Kiara / Nur Syazwani Azman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation of ceramic tiles / Nur Syuhada Suhaimi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Elevator installation at Sungai Pinang apartment / Nur Zafirah Rosshidi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Variation order process for renovation of a single-storey house at Balok / Nur Zuhairah Syazwani Shaifullizam. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Method of roof construction / Nurafiqah Nadhirah Zulmat. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction process / Nur’Ain Natasha Mohd Mansor. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovating and upgrading customers’s house and related work in Simpang Ampat, Pulau Pinang area / Nuramirah Samsuddin. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The construction of flat slab / Nurfarah Hanim Mohammad Fadzil. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Purchaser materials for construction works / Nurin Afrina Muhammad Ruslan. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Property management: building manager’s obligations / Nurmishael Amalia Kamaruizam. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The quotation process at project Giatmara / Nursyakirah Shamsudin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building plan approval process at Majlis Perbandaran Taiping / Nursyazlia Ahmad Fauzi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building plan approval process / Nurul 'Adilah Abdul Aziz. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak. (Submitted)

The construction works of elevated water tank at Taman Abad, Tebrau, Johor / Nurul Aimi Ajlaa Md.Hasrin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation inspection process at the clovers, Penang / Nurul Aimuni Athirah Mohd Shafie. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Periodical building inspection under Act 133 at Summit Subang USJ / Nurul Ain Aisyah Zulkifli. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The using of computerises maintenance management information system (CIMMS) in facility management at Bangunan Persekutuan Persiaran Jubli Emas Kangar, Perlis / Nurul Ainaa Afifah Ahmad Basri. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Supervision quality control of renovation house at no 1309, Taman Tunku Sarina, Bandar Darul Aman, Jitra, Kedah / Nurul Amerah Mohamad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Pad foundation construction / Nurul Amirah Nasyarah Che Zailan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Process of house defect inspection during DLP for high rise building: case study at Troika Residence / Nurul Aqeesya Abdul Aziz. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Brickwork / Nurul Asyura Md Zaini. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building condition assessment (BCA) for typical strata residential unit / Nurul Atikah Dzulkefli. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building condition assessment at Pejabat Daerah Yan / Nurul Atikah Ibrahim. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building maintenance work / Nurul Faiezah Mohd Zamili. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Defect inspection for house construction / Nurul Fatin Idayu Azman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation and maintenance project at Pertubuhan Peladang kawasan Padang Rengas fertilizer store / Nurul Hanis Azmi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The procuder of renovation project / Nurul Hidayah Mohd Noor. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The construction of mainline works at Sungai Besi - Ulu Kelang Highway (SUKE) privatization project / Nurul Izzah Balqish Yusnee. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Procedure of reporting the building defects / Nurul Izzah Mohd Azli. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation of RC column / Nurul Izzati Abd Rahim. (2020) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction management / Nurul Izzati Md Mazlin. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance and practical work for air-conditioning system at Ixora Hotel / Nurul Nabila Azhar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building inspection for defect liability period at Setia ECO Glades Cyberjaya / Nurul Najah Nasrul. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction of a blower room at PJA 229, Indah Water Konsortium Sdn Bhd / Nurul Najihah Rohaizat. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Mangrove piling at Gunung Lang / Nurul Rabiatul Adawiah Yahaya. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Process of interlocking brickwork for wall at Perla Apartment Project / Nurul Syafinaz Nasfi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building approval procedure / Nurul Syafiqah Mohamad Rosidi. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Slab construction process for bungalow project in Tumpat, Kelantan / Siti Arisa Syafika Azman. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tendering / Nurul Syamimi Hana Ngaini. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation works of dewan serbaguna at Kompleks Belia dan Sukan Negeri Terengganu / Nurul Yasarah Mohamad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Plan approval process / Nurulain Abd Ghani. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Permits application process for construction at Majlis Perbandaran Taiping (MPT) / Nurul Athirah Ibrahim. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction process of beam and slab in Kompleks Belia dan Sukan Negeri Terengganu / Nurulhidayah Mohamad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building plan approval process: two storey terrace house at Taman Beauty, Mukim Simpang, Taiping, Perak / Nurulhuda Mohamad Anizan. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Rural roads maintenance at Kampung Tepi Alor, Mukim Naga, Kedah / Rashdan Munir Badrul. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Road maintenance / Puteri Nur Aidaliyana Amirruddin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction of Sewerage Pipeline Netwok at Jalan Mamanda 11 to Jalan Kabus, Ampang / Putri Nadila Emylia Suri. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Renovation works of Johor State Town and Country Planning Office at Bangunan Dato' Mohamad Salleh Perang, Kota Iskandar / Rahima Farisya Abd Rahim. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Personal Protective Equipment (PPE) at port / Razeen Rafiqi Nordin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

A study of Sewege Treatment Plants (STP) 1 at UiTM Merbok / Nurul Najwa Suhadah Ismail. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Extension of time for construction works at Sekolah Kebangsaan Kedaik, Rompin, Pahang / Seri Nuraliah Adzmi. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The IBS construction for Perumahan Rakyat Termiskin (PPRT) single storey houses in Chemor, Perak Darul Ridzuan / Sharifah Nurin Afiqah Syed Razali. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Tebder process for construction project / Siti Humairah Azahari. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Process of submission approval for street lighting / Siti Maisarah Mohd Som. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Handling the process of installation, testing and commissioning of the extra low voltage (ELV) – access control system at manufacturing industries, Batu Kawan, Penang / Siti Nadiah Othman Foad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Bricklaying wall construction / Siti Nur Aishah Abdul Razak. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

A case study of precast drawing and construction at Starbucks, Discovery Park (Gamuda Cove), Tanjung 12, Selangor / Siti Nur Farzana Mohamad Fazali. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The stage and work process of Interior Housing Design / Siti Nurfarhanim Hanaffi. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Architectural design and defects of traditional house of Dato’ Mursyid Diraja Haji Abdul Rahman Bin Abdullah (surau) / Siti Nursalimi Mohamad Ruslee. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Infrastructural authority submission for multipurpose hall at Bandar Baru Permas, Johor Bahru, according to Act 133, MSMA2, ms1228:1991, mwa & span / Siti Rabiatul Adawiyah Mohd Adnan. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Fire protection system at TNB Pasir Gudang / Siti Syahlizah Zainal. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Menaik taraf Pasar Taiping, Perak / Syahfi Irfan Syahril. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance & services work (roof renovation) / Syakir Aiman Samsuri. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The construction process of pre-cast concrete piling / Syamimi Mohamad Suhaimy. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Installation method of floor finishes for a unit of semi-D single storey house / Syazwana Qistina Abdul Aziz. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Pile cap construction for Klinik Kesihatan (Type 3) (KK3 Kepala Batas, Kedah) / Tengku Ammar Hakim Tengku Mahusin. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Building structural work for concrete slab & column / Umairah Fuad. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

The process of CCC approval / Wan Muhammad Syahmi Thaqif Wan Muhamad Subri. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Maintenance works at SMK Landas / Wan Nor Hakimah Wan Abu Bakar. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

House renovation / Wan Nur Alfira Wan Mohamed Razali. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Construction and maintenance of public facilities: bus stop / Wan Nur Alfira Wan Mohamed Razali. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Requirement for implementation of Rainwater Harvesting System (RWHS) for issuance of certificate of completion and compliance (CCC) / Zairul Azri Zuhairi. (2021) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Office renovation / Zikry Aiman Zulkefli. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Laporan latihan amali: penyeliaan di tapak bina / Mohamad Shahrul Nizam Mat Isa. (1996) Industrial Training. UNSPECIFIED. (Unpublished)

Autoclaved Aerated Concrete (AAC) blocks for wall element at Pejabat Kesihatan Daerah Jeli, Kelantan / Alif Ikmal Mat Izman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of starken Autoclaved Aerated Concrete (AAC) block wall / A'fif Rusydan Othman. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of ground floor slab for administration building, Sakj Lebai Mohd Yaakob, Ayer Baloi, Pontian, Johor / Siti Nur Azirah Bachok. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The production of on site precast concrete components for Industrialised Building System / Muhamad Asyraf Hakeem Dzulkafli. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Procurement of roller shutter for Masjid Kota Kemuning, Seksyen 31 Shah Alam / Mohammad Zulfazdley Mohd Zulkifli Cheng. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of pad foundation / 'Ainaa 'Arifah Awang Omar. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The addition of admixture into concrete for the construction of roof slab / Nur Aini Jamaludin. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of car porch steel structure / Muhammad Danish Haykal Mohd Tarmizi. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of additional roof truss steel structure for covered carpark / Natrah Munirah Rosli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Workplace safety inspection at project site of renovation and maintenance work / Ahmad Azrul Ikhwan Juhar Arifin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of pad footing / Ahmad Danial Ahmad Tarmiji. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Gabion wall installation at Akademi Binaan Malaysia Wilayah Utara Sintok, Kedah / Anis Sofea Ismail. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Process of road maintenance works / Muhammad Alif Mokhtar. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Building maintenance project at Menara Tabung Haji, JB / Zhimiya Muhammad. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Piling works of reinforced concrete pile / 'Ayuni Nadhirah Mohamad Yamin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Quality control of Sekolah Agama Kebangsaan Johor (SAKJ) project / Farah Aina Mohd Zam. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Superstructures work of housing / Mohamad Nurfakhrul Azizi Mohd Zalani. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction method of superstructure for terrace house / Wan Nurul Izzah Wan Ibrahim. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Use of UAC concrete wall panels as Industrialised Building System in school project at Putrajaya / Syafiq Najmuddin Jamali. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of residential housing using shear wall method / Nursyarnini Izma Shaari. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of the precast U-drainage / Mohamad Farhan Mohd Ayob. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Upgrading of road safety infrastructure (divider) / Nur Liely Syafiqah Khairuddin. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Introduction to epoxy waterproofing method / Nur Yasmin Adibah Ronizam. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The defects in housing project / Fatin Sabiha Abdullah. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The extension of time of Kajang 2 commuter station / Siti Aisyah Afifah Zulkifli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Earthwork and piling works / Nik Ahmad Bakri Mohd Iburadi. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defect list at semi-D housing project / Muhammad Izzat Farhan Mustapa. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Light weight concrete panel wall / Badrul Hisham Mohd Zamri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

A case study of building defects at Bank Negara Malaysia (lower ground 1) / Nur Syamira Zamri. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defect of floor tiling / Muhammad Akram Hafiy Ahmad Sabri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Concrete frame structure of block 11 and block 12 of Academic Building for Faculty of Geoscience and Petroleum Engineering at University Teknologi Petronas Seri Iskandar Perak / Siti Fatin Najihah Samsul Bahari. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

RC pile and pile cap construction / Nur Zulaikha Mohd Razip. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defects works at KL Traders Square Gombak / Nor Najwa Abd Rahman. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation process of reinforced concrete square pile for toll Plaza Complex Damansara - Shah Alam / Noraisya Mis Suan. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

RC column and beam construction / Noor Ismanajwa Ismail. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The construction of staircase using aluminium formwork at Impiana Sky Residensi, Bukit Jalil / Muhamad Imran Nor Halim. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Preparation of bill of quantities / Mohamad Aiman Hafiz Jamil. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Internal cold water supply system of office building at chemical factory / Maizatul Hanisah Lani. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method and procedure of pile load test in PTD 182919, Bukit lndah, Iskandar Puteri, Johor / Nur Erisha Emalin Alwi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Type of tiles and their application in building / Muhammad Zahid Zainol. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Progress payment claims / Nurul Ain Ayuhibullah. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Tiles installation at 3-storey bungalow / Nurfarhana Ahmad Fauzi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of pile cap / Nur Syahira Liyana Mohd Ghazali. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of pile cap / Nurul Afiqah Natasha Yahaya. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

The uses of Technical Material Sheet (TMS) for the maintenance of a government office building in Putrajaya / Nurul Izzati Shamsul Bahri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defects in construction / Putri Saghirah Nur Mohamed Nasri. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Maintenance in residential building / Nurul Nabila Husna Zulkifli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Total quality management for site supervision / Muhammad Aiman Abd Jaafar. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Passenger lift installation in Academic Complex at Sultan Azlan Shah Campus, Universiti Pendidikan Sultan Idris, Tanjong Malim, Perak Darul Ridzuan / Nur Anati Husna Norisham. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of road at Desa Bangau Parit, 28000 Temerloh, Pahang Darul Makmur / Nur Hidayah Rahim. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Roof trusses / Muhammad Safuan Ismail. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of precast column and beam (Industrialised Building System) / Nur Syakira Huda Radzi. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

2-storey terrace house structure construction / Rabiah Nashamirah Abd Rahman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Renovation work for a house / Mohd Shafiq Helmi Mohamad Sharif. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of billboard type gantry structures at KM 12.50 Elite Highway / Aina Awatif Kamarul Azizi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Brickwall installation / Aqilah Abdullah. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)