Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 439.

Article

Mahmud, Khan Raqib and M. M., Rhaman and Al Azad, Abul Kalam (2017) Parametric studies and reliability of near-wall turbulence modeling for Large Eddy Simulation of incompressible flows / Khan Raqib Mahmud, M. M. Rhaman and Abul Kalam Al Azad. Journal of Mechanical Engineering (JMechE), 14 (2). pp. 125-147. ISSN 1823-5514 ; 2550-164X

Gorjikolaie, Mehran Taghipour and Gholamian, S. Asghar (2014) Comparison of several improved versions of particle swarm optimizer algorithm for parameter estimation of squirrel-cage induction motors / Mohammad Yazdani-Asrami, Mehran Taghipour Gorjikolaie and S. Asghar Gholamian. Jurnal Intelek, 8 (2). pp. 27-35. ISSN 2231-7716

A. Hamid, Ahmad H. and Kasolang,, Salmiah and A. Ghaffar,, Zulkifli and M. Noh, Mohd H. (2018) On the Effect of Central Jet in Solid Cone Pressure-Swirl Atomizers / Ahmad H. A. Hamid ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 260-271. ISSN 18235514

A. Ismael, Mhadi and R. Heikal, Morgan and A. Aziz, A. Rashid and El-Adawy, Mohammed (2018) The effect of injection pressure on the droplet size distributions and micro-explosion / Mhadi A. Ismael ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 91-102. ISSN 18235514

A. Rahim, A. A. and Abdullah, S. and K. Singh, S. S. and Nuawi, M. Z. (2018) Relationship between time domain and frequency domain strain signal – Application to real data / A. A. A. Rahim ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 178-191. ISSN Special Issue Advances in Engineering and Technology Vol 6

A. Rahman, N. and Abdullah, M.F. and Abdullah, S. and Zamri, W.F.H. and Omar, M.Z. and Sajuri, Z. (2017) Characterising Ballistic Limits of Lightweight Laminated-Structure as a Protective Panel for Armoured Vehicle / N.A. Rahman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 20-34. ISSN 18235514

A. Raus, A. and Wahab, M.S. and Ibrahim, M. and Kamarudin, K. and Ahmed, A. and Sa’ude, N. (2017) A Comparative Study of Mould Base Tool Materials in Plastic Injection Moulding to Improve Cycle Time and Warpage Using Statistical Method / A.A. Raus ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 1-17. ISSN 18235514 (Submitted)

A. Samat, Syafirah and Mat Isa, A.A. and Anuar, M. Azhan (2017) Performance Evaluation of Dynamic Absorbers Based on Randy Fox and Dunkerley Methods / Syafirah A. Samat ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 263-279. ISSN 18235514

A.A.M., Redhwan and W.H., Azmi and M.Z., Sharif and N.N.M., Zawawi and R., Mamat (2018) Sonication time effect towards stability of Al2O3/PAG and SiO2/PAG Nanolubricants / A.A.M. Redhwan..[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 14-27. ISSN 1823-5514 ; 2550-164X

A.K., Shafura and M.H., Mamat and M, Uzer and M., Rusop and N.D., Md Sin and A., Shuhaimi and A.H. Alrokayan, Salman and A. Khan, Haseeb (2017) Sensing properties of nanostructured zinc oxide-based gas sensor fabricated using immersion method / A.K. Shafura...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 53-64. ISSN 1823-5514 ; 2550-164X

A.M.S., Zuan and S., Syahrullail and M.D., Arif and S., Kamitani (2017) Tribological performance of palm kernel oil at various load using pin-on-disk tribotester / A.M.S. Zuan... [et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 91-102. ISSN 1823-5514 ; 2550-164X

A.M.S., Zuan and S., Syahrullail and N., Ngadi and Ruslan, N.N. (2017) Bio-based Lubricants from Modification of RBD Palm Kernel Oil by Trans-Esterification / A.M.S. Zuan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 199-211. ISSN 18235514

A.R.M., Aminullah and W.H., Azmi and A.A.M., Redhwan and M.Z., Sharif and N.N.M., Zawawi and K., Kadirgama and M.N.S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) compressor by using Al2O3/PAG Nanolubricant / A.R.M. Aminullah...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 49-61. ISSN 1823-5514 ; 2550-164X

Ab Ghani, Ahmad Fuad and Mahmud, Jamaluddin (2018) Hardness, tensile and microstructure assessment of carbon/glass hybrid composite laminate / Ahmad Fuad Ab Ghani and Jamaluddin Mahmud. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 91-105. ISSN 1823-5514 ; 2550-164X

Ab Hamid Pahmi, Muhammad Arif and Idres, Moumen and Mahamad Basri, Mahamad Hisyam and Che Mat, Sharzali (2011) Computational study of the effect of intake geometry on the performance of an internal combustion engine / Muhammad Arif Ab Hamid Pahmi ... [et al.]. Jurnal Intelek, 6 (1). pp. 111-117. ISSN 2231-7716

Ab Rahman, Mohd Hidayat and Maidin,, Nurul Ain and Ahmad,, Mohd Nazri and Osman,, Mohd Hairizal and Wahid,, Mohammad Khalid and Wahid,, Mohd Fa’iz and Firdaus,, Mohamed Saiful and Mohd Yassim, Halyani and Muhammad Damanhuri, Amir Abdullah and Abd Sukor, Siti Marsyidah (2018) The Comparison Study of Handgrip Pressure on Steering Wheel National Cars / Mohd Hidayat Ab Rahman ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 89-105. ISSN 18235514

Ab Wahab, Norrul Hafizan and Saad, Nor Hayati and Nasir, Norazne and Mahamad Sahab, Abdul Rahim (2017) Plaster Mould Selection for Ceramic Slip Rotary Moulding System (CSRM) / Norrul Hafizan Ab Wahab ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 109-120. ISSN 18235514

Abd Latif, Mohamad Zulfazli Arief and Ahmad, Muhammad Aiman and Mohd Nasir, Rizal Effendy (2017) K-180 G Micro Gas Turbine Performance Evaluation / Mohamad Zulfazli Arief Abd Latif...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 64-77. ISSN 18235514

Abd Manap, Muhammad Faris and Shuib, Solehuddin and Romli, Ahmad Zafir and Ahmed Shokri, Amran (2017) Finite element study of acetabular cup contact region for Total Hip Replacement (THR) / Muhammad Faris Abd Manap ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 71-82. ISSN 1823-5514 ; 2550-164X

Abd Rahim, Erween and Jaafar, Mohd Noor and Mohid, Zazuli and Ibrahim, Mohd Rasidi and Ahmad, Said (2018) A Study on Cryogenic Supercritical Carbon Dioxide Coolant Delivery Technique when Machining of AISI 1045 Steel / Erween Abd Rahim ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 37-49. ISSN 18235514

Abd Rahman, Khairil Muhaimin and Wirachman, Wisnoe and Istihat, Yusman (2017) The effect of orifice diameter to the acoustic signal at the hot tube of a Ranque-Hilsch Vortex Tube / Khairil Muhaimin Abd Rahman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 29-38. ISSN 1823-5514 ; 2550-164X

Abd Rahman, Muhammad Luqman Hakim and Hudha, Khisbullah and Abd Kadir, Zulkiffli and Amer, Noor Hafizah and Murrad, Muhamad (2018) Simulation study on the vehicle speed control in longitudinal direction using a new Continuously Variable Transmission (CVT) System / Muhammad Luqman Hakim Abd Rahman ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 127-146. ISSN 18235514

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Parameter Magnitude-Based Information Criterion in Identification of Discrete-Time Dynamic System / Md Fahmi Abd Samad and Abdul Rahman Mohd Nasir. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 119-128. ISSN 18235514

Abdul Halim, Nurul Hayati and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Azhar, Muammar Faiq (2019) Prediction of cutting force for milling of inconel 718 under cryogenic condition by response surface methodology / Nurul Hayati Abdul Halim...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 1-16. ISSN 1823-5514 ; 2550-164X

Abdul Majid, M. M. and Salleh, M. S. and Abu Hashim, M. A. and Ismail, N. H. and Mansor, S. and Abu Bakar, S. A. (2018) Performance of Semi Active Lateral Control (SALC) algorithm for semi active suspension system in multibody co-simulation method / M. M. Abdul Majid ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 45-65. ISSN 18235514

Abdul Rahim, P.S and Shamsudin, M.S. and M., Rizamarhaiza and Nazaruddin, N.A. (2017) The effect of Nickel Oxide (NiO) compositions in consolidation of Silica-Nickel Oxide (SiO²-NiO) foams using replication method / P.S. Abdul Rahim ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 63-72. ISSN 18235514

Abdul Razak, Siti Norsyahirah and Abdullah, Jamaluddin and Md Akil, Hazizan (2018) Medical Implant Production using Three-Dimensional Printing as a Potential Manufacturing Process in Medical Application / Siti Norsyahirah Abdul Razak ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 232-246. ISSN 18235514

Abdul Saad, Wan Aliff and Mat Dzahir, Mohd Azuwan and Mohamed, Hussein and Ahmad,, Zair Asrar and Mohamad, Maziah and Mad Saad, Shaharil and Mat Dzahir, Mohd Azwarie (2017) Posture Detection on Active and Inactive Vertebrae of Spine Biomechanics in Critical Daily Activities / Wan Aliff Abdul Saad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 49-74. ISSN 18235514

Abdul Sani,, Amiril Sahab and Abd Rahim, Erween and Talib, Norfazillah and Kamdani, Kamaruddin and Rahim, Mohammad Zulafif (2017) Performance Evaluation of Palm-Olein TMP Ester Containing Hexagonal Boron Nitride and an Oil Miscible Ionic Liquid as Bio-Based Metalworking Fluids / Amiril Sahab Abdul Sani ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 223-234. ISSN 18235514

Abdullah, Bulan and Muhammad Yusof, Khalissah and Saad, Nor Hayati and Mokhtar, Ahmad Syazni (2018) The effects of 0.16 % Chromium + 1.32 % Nickel addition on austempered ductile Iron for mechanical properties and slurry erosion / Bulan Abdullah ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 108-120. ISSN Journal of Mechanical Engineering (JMechE)

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2017) Comparative Study of Non-Productive Tool Path Length for Contour Parallel Machining / Haslina Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 211-220. ISSN 18235514

Abdullah, M.F. and Abdullah, S. and Omar, M.Z. and Sajuri, Z. and Risby, M.S. (2018) Observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact / M.F. Abdullah ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 129-141. ISSN 18235514

Abdullah, Mohd Azman and Ibrahim, Munaliza and Abdul Rahim, Muhammad Aliff Haika (2017) Experimental and analysis of vehicle dynamics performance based on driving behavior / Mohd Azman Abdullah... [et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 193-206. ISSN 1823-5514 ; 2550-164X

Abdullah, Nurul Huda and Sazaly, Nur Nabila and Awang, Haryati and Hamid, N.H. (2019) Characterizing p-wave velocity and elastic properties of sedimentary rocks for foundation of building / Nurul Huda Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 199-210. ISSN 1823-5514 ; 2550-164X

Abdullah, Ummi Noor Nazahiah and Othman, Norashiken and I. Romli, Fairuz and Handroos, Heikki (2018) Investigation on user experience goals for joystick interface design / Ummi Noor Nazahiah Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 133-142. ISSN 1823-5514 ; 2550-164X

Abdullah Make, Muhammad Razif and Faisae Rashid, Mohd Fadzil and Razali, Muhamad Magffierah and Perumal, Manugari (2017) Assembly Line Balancing using Heuristic Approaches in Manufacturing Industry / Muhammad Razif Abdullah Make...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 171-185. ISSN 18235514

Abdullah Ramdzam, Nazarrudin and Mahmud, Jamaluddin (2017) Investigating The Shear Behaviour of Hard Points on Honeycomb Sandwich Panels / Nazarrudin Abdullah Ramdzam and Jamaluddin Mahmud. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 197-210. ISSN 18235514

Abdullah*,, Amirah and Mohamad,, Imran Syakir and Masripan,, Nor Azmmi and Zainal Abidin, Syazwani and Bani Hashim, Ahmad Yusairi (2018) Thermal properties characteristics of MWCNT-OH based Nanofluids in mixture of Ethylene Glycol and Deionized water / Amirah Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 53-71. ISSN 1823-5514 ; 2550-164X

Abidin, Azrriq Zainul and Wan Abdul Rahaman, Wan Emri and HP Manurung, Yupiter and Abu Bakar, Muhammad Raimiey (2017) Fatigue Life Assessment of 9mm Thickness Low Carbon Steel with Multi-Objective Optimized Welding Process / Azrriq Zainul Abidin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 143-153. ISSN 18235514

Abu Bakar, Raihan and Singh, Baljit and Remeli, Muhammad Fairuz (2020) Experimental electrical characterisation of thermoelectric generator using forced convection water cooling / Raihan Abu Bakar...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 1-16. ISSN 1823-5514 ; 2550-164X

Abu Bakar, S. A. and Abdul Majid, M. M. and Mansor, S. and Abdul Hamid, M.K. and Daud, Z.C. (2018) Performance comparison between skyhook and semi active damping force estimator (SADE) algorithms for semi active suspension system / S. A. Abu Bakar ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 143-159. ISSN 18235514

Adam, Muhammad Aqif and Sulaiman, Alawi and Abd Pahmy, Nur Fitrah Aqilah and Mokhtar, Mohd Noriznan and Tabatabaei, Meisam and Subbian, Karuppuchamy (2019) The Effects of MAPP and OPDC on Physical and Mechanical Properties of OPDC-RPC / Muhammad Aqif Adam...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 83-97. ISSN 1823-5514 ; 2550-164X

Adull Manan, Nor Fazli and Abdul Aziz, Abdul Hakeem and Mahmud, Jamaluddin and Abdullah, Abdul Halim (2018) Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 123-140. ISSN 18235514

Adull Manan, Nor Fazli and Nik Mohd Masdek, Nik Rozlin and Abdul Aziz, Qayyum and Salleh, Zuraidah (2017) The Study of Corrosion Behaviour of Cobalt-Iron (CoFe) Alloy Coating / Nor Fazli Adull Manan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 167-183. ISSN 18235514

Ahmad, Ahsana Aqilah and Rashid, Amirul Abd and Wong, Freddawati Rashiddy and Iqbal, Muhammad (2017) Worker Safety Improvement at Paper Pleating Production Line Using Poka-Yoke Concept - A Case Study in Automotive Industry / Ahsana Aqilah Ahmad ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 183-196. ISSN 18235514

Ahmad, Rozie Nani and Muhamad, Norhamidi and Sulong, Abu Bakar and Wahi, Azizah and Mohd Salleh, Farrahshaida (2017) Rheological properties of titanium niobium based feedstocks for metal injection moulding / Rozie Nani Ahmad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 139-149. ISSN 1823-5514 ; 2550-164X

Ahmad, Rozie Nani and Muhamad, Norhamidi and Wahi, Azizah and Junaidi, Syarif (2017) Parameter Optimization of Sintering Ti-6Al-7Nb Powder and Palm Stearin Binder System for the Highest Sintered Density using the Taguchi Method / Rozie Nani Ahmad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 55-64. ISSN 1823-5514 ; 2550-164X

Ahmad, S. R. and Arifin, A. and Abdullah, S. and M. Yunoh, M. F. (2018) Characterisation of Stress Intensity Factor with Magnetic Flux Signal Leakage in Stable Fatigue Crack Growth Region S. R. Ahmad ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 141-155. ISSN 18235514

Ahmad, Said and Abd Rahim, Erween and Lajis, Mohd Amri and Ibrahim, Mohd Rasidi (2017) Powder Mixed Dielectric in Electrical Discharge Machining of Inconel 718 / Said Ahmad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 110-127. ISSN 18235514

Ahmad, Y. and A. Kassim, K. A. and M. Isa, M.H. and Mustaffa, S. (2018) A comparison between ISOFIX and seatbelt installation methods for child restraint system on child occupant performance / Y. Ahmad ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 131-141. ISSN 18235514

Ahmad Hamidi, Mohd Faizul Farhan and Wan Harun, Wan Sharuzi and Che Ghani, Saiful Anwar and Osada, Toshiya (2017) Effect of Sintering Parameters on Physical Properties of SS 316L Alloy Compact / Mohd Faizul Farhan Ahmad Hamidi..[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 123-131. ISSN 18235514

Ahmad Kamal, Norashikin and Sangmin, Shin and Heekyung, Park (2017) Predictive Model of Parameters Validation for the Vortexanda Technique by using Fuzzy Logic and Neural Network / Norashikin Ahmad Kamal ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 19-36. ISSN 18235514

Ahmad Rasyid, Mohd Fadli and Salim, Muhamad Saifuddin and Zakaria, Muhammad Razlan and Mad Akil, Hazizan and Mohd Ishak, Zainal Arifin and Ahmad Thirmizir, Mohd Zharif (2018) Effect of sodium silicate on the dimensional stability and mechanical behaviour of non-woven flax reinforced acrylic based polyester composites / Mohd Fadli Ahmad Rasyid... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 233-245. ISSN 18235514

Ahmad Zakwan, Fariz Aswan and Krishnamoorthy, Renga Rao and Ibrahim, Azmi and Mohd. Ismail, Abdul Manaff (2019) Performance based approach of Cellular Steel Beam (CSB) exposed / Fariz Aswan Ahmad Zakwan...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 227-236. ISSN 1823-5514 ; 2550-164X

Ahmad Zakwan, Fariz Aswan and Renga, Rao Krishnamoorthy and Ibrahim, Azmi and Mohd. Ismail, Abdul Manaff (2019) Performance based approach of Cellular Steel Beam (CSB) exposed to fire / Fariz Aswan Ahmad Zakwan...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 227-236. ISSN 1823-5514 ; 2550-164X

Ahmadipourroudposht, Mohaddeseh and Mohd Yusof, Noordin and Kuan, Yew Wong (2018) QFD-Operational research as an integrated method for developing product design process in one-of-a-kind production / Mohaddeseh Ahmadipourroudposht... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 153-173. ISSN 18235514

Ahmed, M.W. and Abidin, Z.Z. and Mustafah, Y.M. and Mourshid, S.K. and Abdelhalim, M.A. and Rahman, H.A and Sulaiman, S.N. (2018) Design and development of image based lane warning and anti-collision detection system / M.W. Ahmed ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 95-105. ISSN 18235514

Ahmed Azhar, Najwa Ezira and Shariffudin, Shafinaz Sobihana and Rusop, Mohamad (2017) Investigation of ZnO Nanotetrapods at different evaporation temperatures by thermal-CVD method for OLED applications / Najwa Ezira Ahmed Azhar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 19-29. ISSN 1823-5514 ; 2550-164X

Aishah Majid, Siti Najatul and Alkahari, Mohd Rizal and Ramli, Faiz Redza and Maidin, Shajahan and Tan, Chee Fai and Sudin, Mohd Nizam (2017) Influence of Integrated Pressing during Fused Filament Fabrication on Tensile Strength and Porosity / Siti Najatul Aishah Majid...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 185-197. ISSN 18235514

Akhbar, Suffiyana and Subuki, Istikamah and Sharudin, Rahida Wati and Ismail, Muhammad Hussain (2018) Performance of Polycaprolactone/Hydroxyapatite (PCL/HA) Composite Blended by Ultrasound Assisted Melt Blending / Suffiyana Akhbar ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 235-250. ISSN 18235514

Amari, Mohamad Dzulhelmy and Che Abdullah, Sukarnur (2017) A Model for Hypersensitive Airflow Sensor Concept / Mohamad Dzulhelmy Amari ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 163-174. ISSN 18235514

Amat, Noor Faeizah and Muchtar, Andanastuti and Ghazali, Mariyam Jameelah and Yahaya, Norziha (2017) Effect of pH of Suspension and Mechanical Treatment on Nanosized Zirconia Dispersion / Noor Faeizah Amat...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 10-19. ISSN 18235514

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and Mamat, Rizalman and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger / Hilmi Amiruddin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 227-236. ISSN 1823-5514 ; 2550-164X

Andud, Dahia and Nordin, Norridzwan and Mat, Muhd Faiz and Saidin, Salina (2018) Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+M) using manual GMAW followed by HFMI/PIT / Dahia Andud... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 205-222. ISSN 18235514

Andwari, Amin Mahmoudzadeh and Muhamad Said, Mohd Farid and Abdul Aziz, Azhar and Esfahanian, Vahid and Zadeh, Ali Salavati and Idris, Mohamad Asmawi and Mohd Perang, Mohd Rozi and Mohd Jamil, Hishammudin (2018) Design, Modeling and Simulation of a High-Pressure Gasoline Direct Injection (GDI) Pump for Small Engine Applications / Amin Mahmoudzadeh Andwari ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 107-120. ISSN 18235514

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and Husin, Kalthom (2017) A Study of Psychophysical Factor for Driver Fatigue Using Mathematical Model / Mohammad Firdaus Ani...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 109-122. ISSN 18235514

Anuar*,, M. Azhan and A. Samat, Syafirah and Mat Isa, A.A. (2017) Experimental Analysis to Evaluate the Effect of Dynamic Absorber / M. Azhan Anuar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 242-262. ISSN 18235514

Arif, Ahmad and Jai, Junaidah and Ahmad Zamanhuri, Norashikin Bio-recovery of silver from simulated silver electroplating wastewater using palm (Elaeis guineensis) leaves extract / Ahmad Arif...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 113-125. ISSN 1823-5514 ; 2550-164X

Arshad, Ahmad Kamil and Samsudin, Mohamad Saifullah and Masri, Khairil Azman (2019) Engineering properties of Nanosilica modified asphalt binder/ Ahmad Kamil Arshad...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 29-40. ISSN 1823-5514 ; 2550-164X

Asri, Nur Fawwaz and Husaini, T. and Majlan, Edy Herianto and Sulong, Abu Bakar and Wan Daud, Wan Ramli (2017) Electrochemical Behaviour and Interfacial Contact Resistance of Ti-6Al-4V and SUS 316L plates with Potential Application as a Bipolar Plate in PEMFC / Nur Fawwaz Asri ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 155-170. ISSN 18235514

Assan, Naziratie Assrinie and Ab Ghani, Amir Radzi and Ramly, Ramzyzan (2019) Design and analysis of impact attenuator for UiTM formula SAE car 2016 / Naziratie Assrinie Assan...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 143-153. ISSN 1823-5514 ; 2550-164X

Assan, Naziratie Assrinie and Ab. Ghani, Amir Radzi and Ramly, Ramzyzan (2017) Crush Response of Stacked Square Toroidal Tubes with A Central Tube / Naziratie Assrinie Assan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 1-14. ISSN 18235514

Assan,, Naziratie Assrinie and Ab. Ghani, Amir Radzi and Ramly, Ramzyzan (2019) Impact response of tubular structure with internally stacked circular rings / Naziratie Assrinie Assan...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 1-15. ISSN 1823-5514 ; 2550-164X

Azam1,, Qummare and Ismail1*, Mohd Azmi and Mazlan2, Nurul Musfirah (2018) Experimental study of Bias Acoustic Liner on nacelle lip-skin/ Qummare Azam ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 67-77. ISSN 18235514

Azaman, Aizreena and Mat Isa, Nurshazni Aiman and Mat Dzahir, Mohd Azuwan and Khor, Kang Xiang (2017) Effects of Baby Carrier on Wearer’s Posture Stability / Aizreena Azaman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 107-118. ISSN 18235514

Azaman, Nur Izzah Lina and Ahmad, Ahsana Aqilah and Ayub, Muhammad Azmi (2017) Resistance Behaviour of Quantum Tunneling Composite (QTC) Pill for Tactile Sensor Application / Nur Izzah Lina Azaman ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 73-83. ISSN 18235514

Azhari, Muhamad Azwar and Md Sallehan, Muhammad Syafi and Nazri, Muhammad Naqib (2017) Oxidation Stability Comparison between Zinc Dialkyldithiophosphate and Zinc Diamyldithiocarbarmate Induced Palm Oil Bio-lubricants / Muhamad Azwar Azhari ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 23-29. ISSN 18235514

Aziz, Mohd Rozaiman and Kuntjoro, Wahyu and Natarajan, Valliyappan David (2018) Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 12-24. ISSN 18235514

Azizan, Mohd Arifhakim and Ismail, Muhammad Hussain and Mohd Salleh, Noor Azlina and Natarajan, David Valliyappan (2017) Sound absorption properties at high sound frequency of open cell aluminium foam / Mohd Arifhakim Azizan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 161-173. ISSN 1823-5514 ; 2550-164X

Azlisham, Nor Ain Fatihah and Mahmood, Zuliani and Mohamad, Dasmawati (2017) Evaluation of Surface Roughness and Compressive Strength of Modified Glass Ionomer Cement with Coumarin Derivatives / Nor Ain Fatihah Azlisham...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 216-220. ISSN 18235514

Azman,, Nurul Farhanah and Samion, Syahrullail and Abd Rahim, Erween and Shunpei, Kamitani (2017) The influence of Zinc-Dialkyl-Dithiophosphate (ZDDP) additives on the tribological performance of RBD palm kernel / Nurul Farhanah Azman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 65-77. ISSN 1823-5514 ; 2550-164X

B., Setiyana and R., Ismail and J., Jamari and D.J., Schipper (2018) A numerical investigation of mechanical response of unfilled styrene butadiene rubber by static straight blade indentation / B. Setiyana...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 43-51. ISSN 1823-5514 ; 2550-164X

Badroush, N. and Che Haron, C. H. and A. Ghani, J. and Azhar, M. F. and Abdul Halim, Nurul Hayati (2018) Performance of Coated Carbide Tools when Turning Inconel Alloy 718 under Cryogenic Condition using RSM / N. Badroush ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 73-87. ISSN 18235514

Badroush, N. and Che Haron, C.H. and Ghani, J. A. and Azhar, M.F. and Abdul Halim, Nurul Hayati (2018) Overview and Case Study of Cryogenic Cooling in Machining of Nickel Based Alloy / N. Badroush ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 187-204. ISSN 18235514

Bahari, Mohd Saiful and Jaffarullah, M. Shamil and Mohamed, Zulkifli and ., Armansyah (2018) Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 174-188. ISSN 18235514

Baharin, Nuraida ‘Aadilia and Muhaimin Yazit, Idznie Faidhi and Bhathal Singh, Baljit Singh and Remeli, Muhammad Fairuz and Oberoi, Amandeep (2017) Construction and Operations of First Salinity Gradient Solar Pond in Malaysia / Nuraida ‘Aadilia Baharin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 217-235. ISSN 18235514

Baharom, Syazwani and Ahmad, Sufizar and Taib, Hariati (2017) The Characterization of Silica-Nickel Oxide (SiO2-NiO) Foam with Different NiO Composition and Sintering Temperatures / Syazwani Baharom...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 135-147. ISSN 18235514

Basher, Hazril Sherney and Sh. Ahmad, Sabarinah and Abdul Rahman, Abdul Rahman (2017) Simulation of vertical greenery system in reducing energy cooling loads for high rise residential building / Hazril Sherney Basher...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 185-196. ISSN 1823-5514 ; 2550-164X

Bekhouche, Djamel and Bouchoucha, Ali and Hamid, Zaidi (2019) Tribological behavior of a contact pin on cylinder CuSn7 bronze rubbing against 20MnCr5 steel in dry sliding with electrical current / Bekhouche Djamel...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 109-128. ISSN 1823-5514 ; 2550-164X

Boonsong, Wasana and Ismail, Widad and Adeleke, Oluseye (2018) Proposed low power consumption of power monitoring and management system embedded RFID with WSN and IoT Technologies / Wasana Boonsong... [et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 120-132. ISSN 1823-5514 ; 2550-164X

Borůvka, Martin and Běhálek, Luboš and Habr, Jiří and Lenfeld, Petr and Vácha, Jan and Ngaowthong, Chakaphan (2017) Properties of Injection Molded Nanocomposites and Blends Based on PLA, PHBV and L-CNC / Martin Borůvka...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 128-141. ISSN 18235514

Budin, Salina and Koay, Mei Hyie and Selamat, Mohd Asri (2018) The Effect of Adding Carbon and Vanadium Carbide on Microstructure and Mechanical Properties of Ultra-Fine WC-Co Composite / Salina Budin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 25-36. ISSN 18235514

C. M., Mardziah and N. R., N. Masdek and Koay, Mei Hyie and Iis, Sopyan (2017) Physicochemical Characteristics of Magnesium Hydroxyapatite (MgHA) Derived via Wet Precipitation Method / C. M. Mardziah ... [et al.]. mardziahcm@yahoo.com, SI 4 (5). pp. 209-216. ISSN 18235514

C.K., Ang and W.Y., Tey and P.L., Kiew and M., Fauzi (2017) An Artificial Intelligent Approach Using Fuzzy Logic for Sleep Quality Measurement / C.K. Ang...[et al.]. Special Issue Engineering for Humanity Vol 2, SI 4 (2). pp. 31-47. ISSN 18235514

C.M., Nur Syazwani and M. Nasir, Rizal E. (2017) The Effects of Tail-Tilt on the Yaw Stability of Baseline-V Blended Wing Body Aircraft / Nur Syazwani C.M and Rizal E.M. Nasir. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 60-73. ISSN 18235514

Che Abdullah, Sukarnur and Amari, Mohamad Dzulhelmy and Ohka, Masahiro (2019) Stereo vision for visual object tracking and distance measurement assessment / Sukarnur Che Abdulla...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 121-134. ISSN 1823-5514 ; 2550-164X

Che Isa, Nik Norziehana and Mohd, Yusairie and Mohd Zaki, Mohammad Hafizudden and Syed Mohamad, Sharifah Aminah (2017) Electrodeposition and characterization of copper coating on stainless steel substrate from alkaline copper solution containing Ethylenediaminetetraacetate (EDTA) / Nik Norziehana Che Isa...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 127-138. ISSN 1823-5514 ; 2550-164X

Che Maideen, Normariah and Budin, Salina and Sahudin, Shuib and Ab. Samat, Hasnida (2017) Synthesizing the Machine’s Availability in Overall Equipment Effectiveness (OEE) / Normariah Che Maideen ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 89-99. ISSN 18235514

Chee, Nian Tan and Chee, Fai Tan and Azman, M. (2018) A Fault Diagnosis Expert System for Building Cooling Tower / Chee Nian Tan..[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 233-247. ISSN 18235514

Chok, E.Y.L. and Majid, D.L.A.A. (2018) Low cycle fatigue of hybrid woven Kenaf Fiber reinforced epoxy composite with 1% addition of Silica Aerogel / Chok., E.Y.L. and Majid., D.L.A.A. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 73-89. ISSN 1823-5514 ; 2550-164X

Chua Abdullah, Muhammad Ilman Hakimi and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an effective engine oil additive to enhance the durability and performance of a small diesel engine / Muhammad Ilman Hakimi Chua Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 103-112. ISSN 1823-5514 ; 2550-164X

Chun, Lan Lim and Chee, Ming Chan (2019) Application of bentonite grout in AKARPILES / Chun-Lan Lim and Chee-Ming Chan. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 175-187. ISSN 1823-5514 ; 2550-164X

Cosmas, P Pagwiwoko and Louis, Jezequel (2017) Modelling of Flutter Vibration using System Dynamic Approach for Analysing Limit Cycle Oscillations / Cosmas P Pagwiwoko and Louis Jezequel. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 27-41. ISSN 18235514

D., Sivakumar and L.F., Ng and Selamat, Mohd Zulkefli (2017) Investigation on fatigue life behaviour of sustainable bio-based fibre metal laminate / D. Sivakumar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 123-140. ISSN 1823-5514 ; 2550-164X

D., Sivakumar and L.F., Ng, and Selamat, M. Z. (2017) Failure analysis of hybrid fibre reinforced plastics for bolted joint under thermal effect / D. Sivakumar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 141-156. ISSN 1823-5514 ; 2550-164X

Darmawan, Rosli and Osman, Mohd Rasid and Mohd Yusuff, Rosnah and Ismail, Napsiah and Leman, Zulkiflle (2004) Manufacturing plant performance evaluation by discrete event simulation / Rosli Darmawan ... [et al.]. Journal of Mechanical Engineering (JMechE), 1 (1). pp. 1-14. ISSN 1823-5514 ; 2550-164X

Desai*,, Sumit and Mantha,, Shankar and Phalle, Vikas (2019) TRIZ and AHP in early design stage of a Novel Reconfigurable Wheelchair / Sumit Desai...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 123-141. ISSN 1823-5514 ; 2550-164X

Dionisius, Felix and Sugiri, Sugiri and Endramawan, Tito and Haris4, Emin (2019) Geometrical study of channel profile under incremental forming process: numerical simulation / Felix Dionisius...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 1-10. ISSN 1823-5514 ; 2550-164X

Duong, Minh Duc and Nguyen, Manh Linh and Dao, Quy Thinh and Do, Trong Hieu (2020) Vibration suppression control of three inertial systems / Duong Minh Duc...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 79-91. ISSN 1823-5514 ; 2550-164X

E. Matarneh, Mohammad and S. Gharaibeh,, Nabeel and Valeriy, V. Chigarev and Anatoliiovych, Havrysh Pavlo (2020) Reduction of copper to steel weld ductility for parts in metallurgical equipment / Mohammad E. Matarneh and Nabeel S. Gharaibeh. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 103-114. ISSN 1823-5514 ; 2550-164X

Ei, Yamamoto and Yuki, Kawamura (2018) Changes in the structure and mechanical properties of bone tissues obtained from experimental animal models of lifestyle-related diseases / Ei Yamamoto and Yuki Kawamura. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 226-234. ISSN 18235514

Elias, Husna and A., Kalam and Abd Rahman, Noorleha and Koay, Mei Hyie (2017) Transformation of wood powder carbon template into biomorphic silicon carbide / Husna Elias...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 151-160. ISSN 1823-5514 ; 2550-164X

Fathurrohim,, Luqman and Ridanto, Eko Poetro and Fariz, Ahmad (2018) Design optimization for mass sizing of LEO communication satellites / Luqman Fathurrohim...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 47-58. ISSN 1823-5514 ; 2550-164X

Fitri, Muhamad and Mahzan, Shahruddin (2018) Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite / Muhamad Fitri and Shahruddin Mahzan. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 223-232. ISSN 18235514

Fletcher, J. B. and Ithnin, A. M. and Yahya, W. J. and Kadir, H. A. and Ramlan, A. (2018) Evaluation of water-in-diesel emulsion fuel blended with metal additives in a diesel engine / J. B. Fletcher ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 21-31. ISSN 18235514

Fonna, Syarizal and Huzni, Syifaul and Zaim, Ahmad and Ariffin, Ahmad Kamal (2017) Simulation of Cathodic Protection on Reinforced Concrete Using BEM / Syarizal Fonna...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 111-112. ISSN 18235514

Frédéric, Etienne Kracht and Alex Armando, Roempler Dellien and Dieter, Schramm (2018) Validation of a suspension model and its elastic behaviour demonstrated at the formula student race car of the University Duisburg-Essen / Frédéric Etienne Kracht ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 35-57. ISSN 18235514

Ghazali, Farizah Adliza and Salleh, Zuraidah and HP Manurung, Yupiter and Md Taib, Yakub (2018) Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 239-247. ISSN Journal of Mechanical Engineering (JMechE)

Graf, Marcel and Härtel, Sebastian and Binotsch, Carolin and Awiszus, Birgit (2018) Virtual Manufacturing as Tool for Material and Process Developments and Optimizations / Marcel Graf ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 33-59. ISSN 18235514

H.V., Shete and M.S., Sohani (2020) Effect of process parameters on surface roughness in HPC drilling of AISI 1055 steel / H.V. Shete and M.S. Sohani. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 33-48. ISSN 1823-5514 ; 2550-164X

Habib, Khairul and Kamaruzzaman, Nurul Afiqah (2018) Performance study of adsorption cooling system driven by waste heat from automobile engine / Khairul Habib and Nurul Afiqah Kamaruzzaman. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 79-89. ISSN 18235514

Haddad, Razieh Khaksari and Reda, Eslam and Rasani, Mohammad Rasi and Malok Zedan, Cristian and Harun, Zambri (2018) Fire simulation of a scaled Mass Rapid Transit (MRT) tunnel / Razieh Khaksari Haddad ... (et al.). Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 1-17. ISSN 18235514

Hadi Sutrisno, Himawan and Triyono, Rizky Danu Rahmanto (2017) Designing a Firefighter Motorcycle as an Effort to Provide an Early Response to Fire Disaster / Himawan Hadi Sutrisno and Triyono. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 249-261. ISSN 18235514

Hafidz Arif Razali, Mohamad Nor and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Ahmad, Nurul Huda (2017) Large-Eddy Simulation of Wind Flow within a Canyon between Modified Idealized Terraced Houses / Mohamad Nor Hafidz Arif Razali...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 243-253. ISSN 1823-5514 ; 2550-164X

Hafsa, MN and Kassim, N and Ismail, S and Kamaruddin, SA and Hafeez, TM (2018) Study on surface roughness quality of FDM and MJM additive manufacturing model for implementation as investment casting sacrificial pattern / MN Hafsa ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 25-34. ISSN 18235514

Hamat, A. Malik and Ghazali, M. Fairusham and Priyandoko, Gigih (2017) The Use of Transmission Line Modelling for Detection of Leakage in Pipeline / A. Malik Hamat...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 74-83. ISSN 18235514

Hamid, K.A. and Azmi, W.H. and Nabil, M.F. and Mamat, Rizalman (2017) Heat transfer augmentation of mixture ratio TiO2 to SiO2 in hybrid nanofluid / K.A. Hamid...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 51-63. ISSN 18235514

Hanapi, Muhammad Ikhmal and Ahmad, Sufizar and Taib, Hariati and Tan, Chee Chen (2017) Physical Properties of Porcelain Ceramic with Influence of Milled Alkali Resistant (AR) Fibreglass for Sewer Pipes Application / Muhammad Ikhmal Hanapi...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 1-9. ISSN 18235514

Harun, Azmi and Sia, Ting Ting and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily (2017) A Study on Parameter Optimization of the Delamination Factor (Fd) in Milling Kenaf Fiber Reinforced Plastics Composite Materials Using DOE Method / Azmi Harun...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 211-224. ISSN 18235514

Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Boejang, Hambali and Attan, Hassan (2017) Feasible Study on Dental Restoration Using Time Compression Technologies / Nurul Hatiqah Harun...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 89-96. ISSN 1823-5514 ; 2550-164X

Harun*,, M. Hafiz and Azhari,, Muhamad Azwar and Yunos, R. and Mat Yamin, A. K. and Sariman, M. Z. (2018) Characterization of a Magnetorheological Fluid Damper Applied to Semi-Active Engine Mounting System / M. Hafiz Harun...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 248-259. ISSN 18235514

Hashim, Hafizan and Ab. Ghani, Amir Radzi and Wahyu, Kuntijoro (2017) Bending Collapse of Closed-hat-section Beams. Part II: Theoretical Model Modification and Validation / Hafizan Hashim ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 57-69. ISSN 1823-5514 ; 2550-164X

Hashim, Hafizan and Ab.Ghani, Amir Radzi and Kuntjoro, Wahyu (2017) Bending collapse of closed-hat-section beams. Part I: Development and validation of finite element models / Hafizan Hashim...[et al.]. 18235514, SI 2 (1). pp. 57-69. ISSN 18235514

Hassan, Kamarul Nizam and Hussain, Ahmad Kamil and Mahmud, Jamaluddin (2017) Static Stability Determination Of An Exhaust Stack Structure Using Finite Element Analysis / Kamarul Nizam Hassan ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 153-166. ISSN 18235514

Hassan, M H and Abdullah, J and Mahmud, A S and Supran, A (2018) Effect of drill geometry and drilling parameters on the formation of adhesion layer in drilling composite-metal stack- up material / M H Hassan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 90-98. ISSN 18235514

Hassan, Sharudin and A. Ghani, Jaharah and Che Haron, Che Hasan and Md Dali, Mohd Nor Azam (2017) Development of Dynamic Assisted Tooling Using TRIZ Approach for Dimple Structure Fabrication in Milling Process / Sharudin Hassan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 23-32. ISSN 1823-5514 ; 2550-164X

Hassan, Sharudin and A. Ghani, Jaharah and Che Haron, Che Hassan and Mohd Dali, Mohd Nor Azam and Rizal, Muhammad (2017) A review of the milling process to fabricate a dimple structure / Sharudin Hassan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 175-192. ISSN 1823-5514 ; 2550-164X

Hassan, Siti Fatimah and Wan Zamri, Wan Fathul Hakim and Mohamed, Intan Fadhlina and Wan Ghopa, Wan Aizon and Md Din, Mohamad Faiz (2017) Influence of Bi Layer Structure and Sub Layer Distance on the Hardness of Multilayer Thin Film TiAlN and CrN / Siti Fatimah Hassan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 199-210. ISSN Special Issue Manufacturing Sustainability towards a Greener Future Vol 1

Hassan, Zulkafli and H., Shaharuddin and I., Wan Asma and M.R., Siti Nur Ridhwah (2018) Production and applications of biodiesel from high acid value feedstocks / Zulkafli Hassan ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 10-15. ISSN 18235514

Hendronursito, Yusup and Isnugroho, Kusno and David, Candra Birawidha and Amin, Muhammad (2019) Analysis of Shielded Metal Arc Welding (SMAW) on high manganese steel hammer-mill crusher / Yusup Hendronursito...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 93-107. ISSN 1823-5514 ; 2550-164X

Hidzir Pauzi, Nabill and Abdullah, Shahrul Azam (2018) Currency identification assistant for visually impaired / Nabill Hidzir Pauzi and Shahrul Azam Abdullah. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 156-164. ISSN 1823-5514 ; 2550-164X

Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Takahashi, Yoshiyuki (2018) Development of a quantitative evaluation method in occupational therapy exercise for upper limb motor function rehabilitation / Hokyoo Lee ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 258-274. ISSN 18235514

Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Yoshiyuki, Takahashi (2018) Evaluation of four-wheel vehicle driven by lower limb with electric pedalling assistance for elderly people / Hokyoo Lee ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 29-43. ISSN 18235514

Hosnie, Siti Mariana and Ismail, Muhammad Hussain and Yahaya, Mazyan and Haris, Nurul ‘Ain and Iain, Todd (2017) Fabrication of Porous β-Type Ti-40Nb Alloys Incorporated with TiH2 via Powder Metallurgy Processing Route Under Reducing Environment / Siti Mariana Hosnie...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 99-112. ISSN Special Issue 2017 Vol 2: Frontiers in Sustainable Energy Research for Humanity

Ibrahim, Dzullijah and Yaakob, Yusli and Hussin, Norasikin and Samad, Zahurin (2017) STEP-NC Interpolator for General 2D and 3D Parametric Curve / Dzullijah Ibrahim...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 269-277. ISSN 18235514

Idris, Roslinda and Abdullah, Shahrum and Prakash, Thamburaja and Omar, Mohd. Zaidi (2018) An experimental investigation of tensile properties and fatigue crack growth behaviour for Dual-Phase Steel / Roslinda Idris...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 155-167. ISSN 1823-5514 ; 2550-164X

Ishak, Farah Diana and I. Romli, Fairuz and Abdul Rahman, Kawthar (2019) Public survey on new In-flight food delivery and waste collection system / Farah Diana Ishak... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). ISSN 18235514

Ismail, Asmawi and Hussain, Patthi and Mustapha, Mazli and Nuruddin, Muhd Fadhil (2018) Fe-Al Diffusion Bonding: Effect of reaction time on the interlayer thickness / Asmawi Ismail...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 80-91. ISSN 1823-5514 ; 2550-164X

Ismail, Muhammad Zaiyad and Azizan, Nur Akmal and Ja’afar, Rabi’atul’adawiyah and Ayub, Muhammad Azmi and Khalid, Noor Khafifah (2017) DC Motor Friction Identification With ANFIS and LS-SVM Method / Muhammad Zaiyad Ismail ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 98-108. ISSN 18235514 (Unpublished)

Ismail, Nur Farhani and Muhamad, Norhamidi and Sulong, Abu Bakar and Che Haron, Che Hassan and Tholibon, Dulina and Tharazi, Izdihar and MdRadzi, Mohd Khairul Fadzly and Razak, Zakaria (2017) Mechanical Properties of Compression Molded Epoxy Polymer Composites Reinforced with Kenaf Fibers / Nur Farhani Ismail ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 1-12. ISSN 18235514

J., Jodiputra and S., Tobing and H., Gunawan (2020) Study on Drag Coefficient (CD) value of low-energy prototype class car / J. Jodiputra...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 109-128. ISSN 1823-5514 ; 2550-164X

J. Hamad, Ahmed and N. Khalifa, Abdul Hadi and Z. Khalaf, Doaa (2019) Performance investigation of vapor compression cycle with a variable speed compressor and refrigerant injection / Ahmed J. Hamad...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 63-76. ISSN 1823-5514 ; 2550-164X

Jad, Uday and Shah, Abhijeet (2019) Numerical and experimental investigation of thermal energy storage in a conical finned tube in PCM storage unit / Uday Jad and Abhijeet Shah. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 51-65. ISSN 1823-5514 ; 2550-164X

Jalaluddin,, Rustan Tarakka and Akio, Miyara (2018) Performance of shallow borehole of spiral-tube ground heat exchanger / Jalaluddin, Rustan Tarakka and Akio Miyara. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 41-52. ISSN 1823-5514 ; 2550-164X

Jalil, Mohd Jumain and Habr, Hamzah Hafizuddin and Abdul, Hadi and Mohd Yamin, Aliff Farhan and Ismail, Kamariah Noor and Abdul Rani, Noor Hidayu (2020) Formation of Dihydroxystearic Acid (DHSA) from epoxidized palm oleic acid by peracid mechanism and their kinetic study / Mohd Jumain Jalil...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 85-94. ISSN 1823-5514 ; 2550-164X

Jamaludin, Siti Nabihah and Mohd Salleh, Ruzitah (2017) Equilibrium Solubility of Carbon Dioxide in Aqueous 2-Amino-2-Methyl-1-Propanol (AMP) Blended with 2-Methylpiperidine (2MPD) at High Pressure / Siti Nabihah Jamaludin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 175-184. ISSN 1823-5514 ; 2550-164X

Jambari, Sharoul and Yahya, Mohd Yazid and Abdullah, Mohamed Ruslan (2018) Characterization of Hybrıd Yarn / Fabrıcs From of Kenaf-Kevlar Fibers / Sharoul Jambari ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 256-267. ISSN 18235514

Jandová, Soňa (2018) Foot strike pattern in sport shoes with different construction / Soňa Jandová...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 29-39. ISSN 1823-5514 ; 2550-164X

Jenan,, S. Kashan and M. Ali, Saad (2020) 3D Model of Bone Scaffolds Based on the Mechanical Behaviour for a Hybrid Nano Bio-composites / Jenan, S. Kashan and Saad M. Ali. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 45-67. ISSN 1823-5514 ; 2550-164X

Jit, Shen Quah and Md Ghazaly, Mariam (2018) Development and analysis of face recognition system on a mobile robot environment / Jit Shen Quah and Mariam Md Ghazaly. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 169-189. ISSN 1823-5514 ; 2550-164X

K. Yasari, N. M. L. P. and Muhayat, Nurul and Triyono, Triyono and Saputro, Y. C. N. (2018) Microstructural and Mechanical Properties of Underwater Wet Welded SS400 Steel / N. M. L. P. K. Yasari ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 168-179. ISSN 18235514

K.Singh, S.S. and Abdullah, S. (2018) Effects of mean stress on the durability assessment for an automobile crankshaft using Markov Chain Modelling Technique / S.S. K.Singh and S. Abdullah. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 19-28. ISSN 18235514

Kamarudin, K. and Wahab, M.S. and Ibrahim, M. and M. Batcha, M.F. and A. Raus, A. and Ahmed, Aqeel and Sa’ude, N. (2017) The Effect of Square Finned Conformal Cooling (SFCC) on Cycle Time for Plastic Injection Moulding / K. Kamarudin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 79-92. ISSN 18235514

Kamarul Baharin, Zainal Abidin and Mohammad, Muhammad Hafiz (2018) Experimental investigations on the performance of a single slope solar still coupled with flat plate solar collector under Malaysian conditions / Zainal Abidin Kamarul Baharin and Muhammad Hafiz Mohammad. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 16-24. ISSN 18235514

Kamarul Bahrain, Siti Humairah and Mahmud, Jamaluddin and A. Rasid, Zainudin and Madete, June (2017) Synthesization and Microstructural Analysis of Arenga Pinnata Fibres and Silicone Rubber for New Silicone Biocomposite Material / Siti Humairah Kamarul Bahrain ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 15-30. ISSN 18235514

Kaname, Miura and Hidenori, Matsubara and Shigeo M., Tanaka (2018) Development of Optical Bone Densitometry Using Near-infrared Light / Kaname Miura ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 60-67. ISSN 18235514

Kataraki, Pramod S and Abu Mansor, Mohd Salman (2018) Identification of Freeform Depression Feature in a Part Using Vertex Attributes From Feature Volume / Pramod S Kataraki and Mohd Salman Abu Mansor. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 217-231. ISSN 18235514

Kaur, Wandeep and Balakrishnan, Vimala (2017) Social Media Sentiment Analysis of Thermal Engineering Students for Continuous Quality Improvement in Engineering Education / Wandeep Kaur ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 263-272. ISSN 18235514

Khairuzzaman, Noor Aishah and Hashim, Hadzli and Mohd Sampian, Ahmad Faiz and Yussuf, Ummu Raihan (2017) White Root Disease Infected Rubber Tree Detection Through Statistical Inference of Dry Rubber Sheet Near Infrared (NIR) Spectrum Measurement Method / Noor Aishah Khairuzzaman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 167-177. ISSN 1823-5514 ; 2550-164X

Khalid, Norazlan and Mukri, Mazidah and Arshad, Mohd Fadzil (2019) Geotechnical properties of Salak Tinggi Residual Soil-Bentonite Mixture as liner / Norazlan Khalid...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 79-90. ISSN 1823-5514 ; 2550-164X

Kiran Kumar, Billa and G.R.K., Sastry and Deb, Madhujit (2020) ANFIS model for prediction of performance-emission paradigm of a DICI Engine Fueled with the Blends of Fish Oil Methyl Ester, n-Pentanol and Diesel / Kiran Kumar Billa...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 115-133. ISSN 1823-5514 ; 2550-164X

Koay, Mei Hyie and Salleh, Zuraidah and Mardziah, C.M. and Mohd Masdek, Nik Rozlin Nik and Resali, Nor Azrina (2018) Corrosion Behavior of Heat Treated Nanocrystalline Co Ni Fe Coating on Stainless Steel / Koay Mei Hyie...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 191-203. ISSN 18235514

Kok, Tee Lau and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Muhamad, Noraiham and Hashim, Mohamad Hanif and Mohd Saad, Nurzallia (2020) Effect of carbon nanotube-silane addition on mechanical properties of chloroprene rubber-filled carbon black / Kok-Tee Lau...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 157-167. ISSN 1823-5514 ; 2550-164X

Kumar*,, Arvind and Rai, Ram Naresh (2020) Study on the development of a quaternary layer of B4C-TiB2-Al3Ti-Al in AA7050 / B4C Ex-Situ composite and influence of heat treatment on mechanical and wear properties / Arvind Kumar and Ram Naresh Rai. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 129-139. ISSN 1823-5514 ; 2550-164X

Kuzaiman,, Nur Asiah and Zainuddin,, Argustina and Mohd Salleh,, Noor Azlina and Kasolang,, Salmiah and Abd Rashid, Amirul (2018) Green Lean TQM Islamic Process Management Practices In Malaysian Food Companies / Nur Asiah Kuzaiman...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 12-22. ISSN 18235514

Lee, Siong Wee and Oh, Chai Lian and Md Zain, Mohd Raizamzamani (2019) Mechanical properties of engineered cementitious composites using local ingredients / Lee Siong Wee...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 145-157. ISSN 1823-5514 ; 2550-164X

Lim, Chong Lye and Adam, Nor Mariah and Ahmad, Kamarul Arifin and Ahmedov, Anvarjon (2017) Cryogenic Pipe Flow Simulation for Liquid Nitrogen / Lim Chong Lye...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 179-198. ISSN 1823-5514 ; 2550-164X

Lim, Chong Lye and Adam, Nor Mariah and Ahmad, Kamarul Arifin and Ahmedov, Anvarjon (2017) Derivation of three-dimensional heat transfer mathematical equations to predict conductivity of insulation systems for liquid nitrogen pipe flow / Lim Chong Lye...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 39-56. ISSN 1823-5514 ; 2550-164X

Lip, Kean Moey and Adam, Nor Mariah and Ahmad, Kamarul Arifin (2017) Effect of Venturi-Shaped Roof Angle on Air Change Rate of a Stairwell in Tropical Climate / Lip Kean Moey ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 135-150. ISSN 18235514

Lippong, Tan and Date, Abhijit and Houshyar, Shadi and Singh, Baljit and Lai, Chet Ding and Bingjie, Zhang (2017) A Comparative Study of Firefighters’ Clothing using Organic and Inorganic Phase Change Material / Lippong Tan ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 84-97. ISSN 18235514

Lohgheswary, N. and Abdul Halim, M. H. and M. Nopiah, Z. and A. Aziz, A. and Zakaria, E. (2018) Developing New Lab Base Teaching Approach for Linear Algebra subject in Engineering Mathematics Courses / N. Lohgheswary ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 220-232. ISSN 18235514

M., Kaladhar (2020) Parametric optimization and modeling for flank wear of TiSiN-TiAlN Nanolaminate Cutting Insert / M. Kaladhar. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 69-84. ISSN 1823-5514 ; 2550-164X

M. Dasuki, Norhafizah and I. Romli, Fairuz (2018) Quality Function Deployment for New Standing Cabin Concept of Commercial Transport Aircraft / Norhafizah M. Dasuki and Fairuz I. Romli. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 247-257. ISSN 18235514

M. F., M. Sharif and A., A. Saad and F. C., An and M. Y., T. Ali and Z., Samsudin (2017) Effect of Stretchable Circuit Deformation on Its Electrical Performance for Automotive Lighting Application / M. F. M. Sharif...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 279-287. ISSN 18235514

M. Jamil, W. N. and Sajuri, Z. and Aripin, M. A. and Abdullah, S. and Omar, M. Z. and Abdullah, M.F. and H. Zamri, W. F. (2017) Effect of Steel Fibres And Wire Mesh Reinforcement on Flexural Strength and Strain Energy Steel-Epoxy-Aluminium Composite Laminates / W. N. M. Jamil ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 185-196. ISSN 18235514

M. N., Muhamed and M. Z., Omar and S., Abdullah and Z., Sajuri and W. F. H., W. Zamri (2017) The Effect of Surface Texture on the Joint Shear Strength of AR500 Steel and AA7075 / M. N. Muhamed...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 289-301. ISSN 18235514

M. Nasir, Rizal E. and Basri, Ilyas H. and M. Ahmad, Aiman and A. Latif, Zulfazli A. and Wisnoe, Wirachman and Kuntjoro, Wahyu (2017) The Effect of Elevons Deflection to Aerodynamic Coefficients of A Tail-less Blended Wing-Body Planform / Rizal E. M. Nasir ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 151-166. ISSN 18235514

M. Rasidi, N. M. and Abdullah, S. and Wahab, D.A. and Ramli, R. and M. Yassin, R. (2018) Assessing Technique Applicability towards Ideation Taxonomy for Engineering Design Concept / N. M. M. Rasidi...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 201-219. ISSN 18235514

M. S., M. Zaharin and N. R., Abdullah and Dahalan, M. Imran and Sharudin, Hazim and A.R., Asiah and M., Beriache (2017) Experimental Study on the Effects of Methanol and Ethanol on Gasoline Engine Performance and Exhaust Emissions / M. S. M. Zaharin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 27-44. ISSN 1823-5514 ; 2550-164X

M. S., Niranjan and Nagendra, Kumar Maurya and Shashi, Prakash Dwivedi1 (2020) Development of a system to control flow of coolant in turning operation / Rajesh Kumar Maurya...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 17-31. ISSN 1823-5514 ; 2550-164X

M. Yunoh, M. F. and Abdullah, S. and M. Saad, M. H. and M. Nopiah, Z. and Nuawi, M. Z. and Ariffin, A. (2018) Classification of Fatigue Damaging Segments Using Artificial Neural Network / M. F. M. Yunoh ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 61-72. ISSN 18235514

M. Yusoff, Nazrul and Johari, Yanti and Ab Rahman, Ismail and Mohamad, Dasmawati and Khamis, Mohd Fadhli and Husein, Adam and Ariffin, Zaihan (2018) Hardness of Flowable Resin Composite from Rice Husk / Nazrul M. Yusoff ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 181-190. ISSN 18235514

M.A., Mahamood and N., Mohamad and A.R., Jeeffeerie and A.H., Mohd Zain (2017) Correlation of open cell structure with properties of green rubber foam from epoxidised natural rubber/reclaimed rubber glove / M.A. Mahamood...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 113-122. ISSN 1823-5514 ; 2550-164X

M.J., Md. Noor and M. F., Jamain (2019) Pull out and creep behaviour of soil nailing – A Case Study / M.J. Md. Noor and M. F. Jamain. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 189-211. ISSN 1823-5514 ; 2550-164X

M.S., Meon and N.H., Mohamad Nor and S., Shawal and J.B., Saedon and M.N., Rao and K.-U., Schröder (2020) On the modelling aspect of low-velocity impact composite laminates / M.S. Meon...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 13-25. ISSN 1823-5514 ; 2550-164X

M.Yusop, Hanafi and Ghazali, M.F. and M.Yusof, M.F. and W.Hamat, W.S. (2017) Development of Intelligent Leak Detection System Based on Artificial Pressure Transient Signal Using Integrated Kurtosis-Based Algorithm for Z-Filter Technique (I-Kaz) / Hanafi.M.Yusop...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 84-102. ISSN 18235514

M.Yusop, Hanafi and Ghazali, M.F. and M.Yusof, M.F. and W.Hamat, W.S. (2019) Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis / Hanafi.M.Yusop ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 103-122. ISSN 18235514

M.Z., Sharif and W.H., Azmi and A.A.M, Redhwan and N. N, M. Zawawi (2017) Improvement of Nanofluid stability using 4-Step UV-Vis Spectral Absorbency Analysis / M.Z. Sharif...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 233-247. ISSN 18235514

MD Alias, Muhammad Aizat and Azhari, Muhamad Azwar (2017) Preliminary Feasibility Studies of Vegetable Oil as Substitution to Mineral Lubricant / Muhammad Aizat MD Alias and Muhamad Azwar Azhari. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 37-46. ISSN 18235514

MVS Murali, Krishna, and Kumar, S Narasimha and Kolli, Vamsi Krishna and Sreeram, Barathula (2018) Experimental Investigation on SI Engine Emissions via EGR and catalytic converter with air injection mechanism / MVS Murali Krishna...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 33-46. ISSN 1823-5514 ; 2550-164X

Mahaidin, Ahmad Aswad and Jaafar, Talib Ria and Budin, Salina and Selamat, Mohd Asri (2017) The Effect of Cobalt, Vanadium Carbide and PKS Activated Carbon Addition on WC-Co Composite: A Study using Taguchi Method / Ahmad Aswad Mahaidin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 42-52. ISSN 18235514

Mahmud, M. and K. Singh, S. S. and Abdullah, S. and Ariffin, A. K. and Nopiah, Z. M. (2018) Determining Damaging Fatigue Cycles under Influence of Random Loadings using the Root-Mean-Square Level / M. Mahmud ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 156-167. ISSN 18235514

Mahmud, Nor Laili and Mohd Arshad, Mohd Arshad and Adnan, Ramli (2017) Sliding Mode Controller Design Based on Pole Placement Method / Nor Laili Mahmud...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 135-144. ISSN 1823-5514 ; 2550-164X

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Firdaus, Mohamed Saiful and Mohd Yassim, Halyani and Afiq Razali, Muhammad Zayani (2018) A prototype development of anti-hunchback device / Nurul Ain Maidin...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 192-209. ISSN 1823-5514 ; 2550-164X

Mali, Mohamad and Samsudin, Azizul Hakim and Mahmud, Jamaluddin and Hussain, Ahmad Kamil (2017) Failure Analysis of Composite Laminates Under Biaxial Tensile Load Due To Variations in Lamination Scheme / Mohamad Mali ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 167-182. ISSN 18235514

Mamauod, Siti Nur Liyana and Romli1,2, Ahmad Zafir and Mustafa Bakri2, Haizum Faiqah (2018) Tensile Properties of Nanoclay (NC)-Acrylonitrile Terminated Polybutadiene (ATBN) Modified Epoxy Composites / Siti Nur Liyana Mamauod ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 44-52. ISSN 18235514

Manosroi, W. (2018) Effects of Temperature Changes, Air Velocities and Volume Fractions on the Single Droplet Evaporation Behaviors at High Ambient Temperatures / W. Manosroi. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 1-19. ISSN 18235514

Maqsood, Adnan and Tiauw, Hiong Go (2012) Design improvement of a versatile ducted-fan UAV / Adnan Maqsood and Tiauw Hiong Go. Journal of Mechanical Engineering (JMechE), 9 (1). pp. 1-17. ISSN 1823-5514 ; 2550-164X

Marwan, Shahrul Hisyam and Tardan, Giha and Zainal, Muhammad Syafiq and Abdullah, Abdul Halim (2019) Effects of Stem Mal-alignment in The Primary Stability of Total Hip Arthroplasty / Shahrul Hisyam Marwan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 229-241. ISSN 18235514

Maso’od, Mashitah and Ismail, Muhammad Hussain and Razali, Rosliza and Subuki, Istiqamah (2018) Effect of sintering temperatures on microstructural changes and phase transformation of nearly equiatomic microporous NiTi Alloy produced by metal injection moulding / Mashitah Maso’od ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 115-126. ISSN 18235514

Masri, Nurhidayah and Md Deros, Baba and Mohd Yusof, Hanizah (2017) Work-Related Musculoskeletal Disorders Among Tea Pluckers / Nurhidayah Masri...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 221-232. ISSN 18235514

Mas’ood, Najlaa Nazihah and Sulong, Abu Bakar and Muhamad, Norhamidi and Mohd Foudzi, Farhana and Mohd Salleh, Farrahshaida (2019) The study of sintering behavior of stainless steel 17-4PH-stainless steel 316L for two materials powders injection molding (2C-PIM) process / Najlaa Nazihah Mas’ood...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 67-77. ISSN 1823-5514 ; 2550-164X

Mat Ali, Mohamed Sukri and Shaharuddin, Nur Haziqah and Jalasabri, Jafirdaus and Mohd Sood, Anwar and Mansor, Shuhaimi (2018) Validation study on external wind noise prediction using OpenFOAM / Mohamed Sukri Mat Ali ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 111-126. ISSN 18235514

Mat Asim, Mohd Tarmizi and Tengku Ibrahim, Tengku Muhammad Fahmi and Adam, Nor Mariah (2017) Strategic energy management plan and MS ISO 50001:2011 compliance / Mohd Tarmizi Mat Asim...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 1-25. ISSN 1823-5514 ; 2550-164X

Mat Dzahir, Mohd Azuwan and Mat Dzahir, Mohd Azwarie and Hussein, Mohamed and Ahmad, Zair Asrar and Mohamad, Maziah and Mad Saad, Shaharil (2017) Hysteresis Modelling of Pneumatic Artificial Muscle using General Cubic Equation and Factor Theorem Prediction Method / Mohd Azuwan Mat Dzahir...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 1-21. ISSN 18235514

Mat Hassan, Nik Normunira and Shamsudin, Zainon Sharmila and Mohd Rus, Anika Zafiah and Sulong, Nurulsaidatulsyida (2018) Investigation of Renewable Polymer Composite from Waste Oil Endurance to UV Irradiation Exposure by using FTIR and UV-Vis / Nik Normunira Mat Hassan ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 53-61. ISSN 18235514

Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Nik Rosli (2018) Simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine / Norhidayah Mat Taib ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 81-93. ISSN 18235514

Mazlan, Muhammad Hazli and Mitsugu, Todo and Ikuho, Yonezawa and Hiromitsu, Takano (2017) Biomechanical Alteration of Stress and Strain Distribution Associated with Vertebral Fracture / Muhammad Hazli Mazlan...[et al.]. Takano, SI 2 (2). pp. 123-133. ISSN 18235514

Mazlan, Siti Nur Humaira and Alkahari, Mohd Rizal and Ramli, Faiz Redza and Sudin, Mohd Nizam (2018) Structure Fabricated using Entry Level 3D Printer / Siti Nur Humaira Mazlan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 98-122. ISSN 18235514

Md Ghazaly, Mariam and Soo, Kok Yew and Abdullah, Zulkeflee and Mohd Ali, Mohd Amran and Chong, Shin Horng and Che Amran, Aliza (2017) Trajectory tracking of a mobile robot system / Mariam Md Ghazaly...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 207-226. ISSN 1823-5514 ; 2550-164X

Md Tahir, Nurul Hidayah and Rizal, Muhammad and Wan Mansor, Wan Nuha and A. Ghani, Jaharah and Nuawi, Mohd Zaki and Che Haron, Che Hassan (2017) The Correlation Between Tool Wear and Vibration Signals from Piezoelectric in End Milling of AISI P20+NI / Nurul Hidayah Md Tahir...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 49-62. ISSN 18235514

Md Zain, Mohd Raizamzamani and Azmi Yahya, Norrul and Lee, Siong Wee and Oh, Chai Lian and Abdul Rahman, Abdul Samad (2019) Bearing strength behaviour of bridge concrete pedestal with confined reinforcements / Mohd Raizamzamani Md Zain...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 167-181. ISSN 1823-5514 ; 2550-164X

Mishra, Dipti Prasad and Paramanik, Subhash Chandra (2019) Computation of air entrainment into a mixing pipe: An experimental and numerical analysis / Dipti Prasad Mishra and Subhash Chandra Paramanik. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 11-28. ISSN 1823-5514 ; 2550-164X

Moghaddam, Iman Tahbaz-zadeh and Ayati, Moosa and Taghavipour, Amir and Marzbanrad, Javad (2019) Modeling and prediction of driver-vehicle-unit velocity using adaptive neuro-fuzzy inference system in real traffic flow / Iman Tahbaz-zadeh Moghaddam...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 105-122. ISSN 1823-5514 ; 2550-164X

Mohamad, Muhammad Nabil Fikri and Wan Hamzah, Wan Azmi and Abdu Hamid, Khamisah and Mamat, Rizalman (2018) Heat transfer performance of Tio2–SiO2 Nanofluid in water-ethylene glycol mixture / Muhammad Nabil Fikri Mohamad...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 39-48. ISSN 1823-5514 ; 2550-164X

Mohamad, Nor Syahirah and Kasolang, Salmiah (2017) Application of Response Surface Methodology in Characterization of Biolubricant with Titanium Oxide Nanoparticles / Nor Syahirah Mohamad and Salmiah Kasolang. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 231-241. ISSN 1823-5514 ; 2550-164X

Mohamad, Shahidan and Abd Halim, Suhaila (2018) Image enhancement process on digital radiographic image with weld discontinuities / Shahidan Mohamad and Suhaila Abd Halim. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 275-292. ISSN 18235514

Mohamad Kamal, Mohamad Ridzuan and Abdul Rahman, Abdul Raheem and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor (2017) Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting / Mohamad Ridzuan Mohamad Kamal...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 97-106. ISSN 1823-5514 ; 2550-164X

Mohamad Nasir, Nadia Nurnajihah and Abdullah, Shahrum and Karam Singh, Salvinder Singh and Yunoh, Mohd Faridz (2018) Time-frequency strain data analysis of suspension using the Hilbert-Huang transform / Nadia Nurnajihah Mohamad Nasir ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 59-77. ISSN 18235514

Mohamad Nor, Nor Hafiez and Nor Hafiez, Hazran and Yahaya, Mohd Azman (2018) Optimizing sintering process to produce highest density of porous Ti-6Al-4V / Nor Hafiez Mohamad Nor ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 44-55. ISSN 18235514

Mohamad Samsuddin, Noorazizi and Izamshah, Raja and Kasim, Mohd Shahir and Che Haron, Che Hassan (2017) Evaluation of Hole Performance and Force Magnitude on Drilling Parameter for Orthopaedic Surgical Bone Drilling / Noorazizi Mohamad Samsuddin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 37-47. ISSN 18235514

Mohamed, Mohamed Ackiel and Manurung, Yupiter Hp (2017) Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651 / Mohamed Ackiel Mohamed and Yupiter HP Manurung. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 83-99. ISSN 1823-5514 ; 2550-164X

Mohamed, Nor Shamsiah and Koh, Ching Theng (2018) Preparation of Siam Weed extracts / Nor Shamsiah Mohamed and Koh Ching Theng. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 268-274. ISSN 18235514

Mohamed Noor, Ahamad Zaki and Md Fauadi, Muhammad Hafidz Fazli and Jafar, Fairul Azni (2019) Fuzzy Analytic Hierarchy Process (FAHP) for Better Selection during Implementation of Design for Remanufacturing in Economy Indicator / Ahamad Zaki Mohamed Noor... [et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 99-120. ISSN 1823-5514 ; 2550-164X

Mohamed Zaharin, Muhammad Syarifuddin and Abdullah, Nik Rosli and Badrulhisam, Najmi Haziq and Hamzah, Fazlena and Majeed Ali, Obed (2018) Estimation method of heating value properties on variations of alcohol-gasoline blends and volume percentages / Muhammad Syarifuddin Mohamed Zaharin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 20-35. ISSN 18235514

Mohamed Zukri, Mohammad Nizar and Abu Bakar, Elmi (2017) An Electroanalytical Instrument Equipped with Wireless Communication Network and Graphical User Interface for Real-time Monitoring Wastewater Status from Batik Industry / Mohammad Nizar Mohamed Zukri and Elmi Abu Bakar. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 153-170. ISSN 18235514

Mohammad, Ahmad Faiz and Zaki, Sheikh Ahmad and Mat Ali, Mohamed Sukri and Yakub, Fitri (2018) Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 189-204. ISSN 18235514

Mohammad, Mazian and Abdullah, Shahrum and Jamaludin, Nordin and Innayatullah, Othman (2018) Fatigue Life Assessment of SAE 1045 Carbon Steel under Strain Events using the Weibull Distribution / Mazian Mohammad...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 165-180. ISSN 1823-5514 ; 2550-164X

Mohammad, Rosdi and Mohd Ariffin, Mohd Kharul Anuar and Baharuddin, B. T. Hang Tuah and Mustapha, Faizal and Aoyama, Hideki (2017) The Effects of Single Cutting Tool Geometry on Surface Roughness / Rosdi Mohammad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 45-54. ISSN 1823-5514 ; 2550-164X

Mohammad, Ubaidullah and Cheng, Yee Low and Abd Rahman, Ramhuzaini and Johar, Muhammad Akmal and Ching, Theng Koh and Roman, Dumitrescu and Martin, Rabe and Asmar, Laban and Kamaruddin, Susana (2019) Smart factory reference model for training on industry 4.0 / Ubaidullah Mohammad...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 129-144. ISSN 1823-5514 ; 2550-164X

Mohammud, Mohd Mahadzir and Mansor, Muhammad Asyraf and Hemdi, Abdul Rahman and Yahaya, Mohamad Irwan (2017) Design and fabrication of a cleaning cum cooling system for downdraft gasifier / Mohd Mahadzir Mohammud... [et al.]. ESTEEM Academic Journal, 13. pp. 105-117. ISSN 1675-7939

Mohd Anuar, Mohd Afzan and Todo, Mitsugu (2017) Mechanics of Posterior Stabilized Total Knee Arthroplasty During Daily Activities in Relation to Prosthesis Condylar and Post-cam Design: A Finite Element Study / Mohd Afzan Mohd Anuar and Mitsugu Todo. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 211-228. ISSN 18235514

Mohd Dali, Mohd Nor Azam and A. Ghani, Jaharah and Che Haron, Che Hassan and Rizal, Muhammad (2017) TRIZ approach for designing a new assisted tooling for dimple structure fabrication / Mohd Nor Azam Mohd Dali...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 79-90. ISSN 1823-5514 ; 2550-164X

Mohd Hassan, Siti Lailatul and Sulaiman, Nasri and Jaafar, Haslina and Saparon, Azilah (2017) Implementation of Pipelined FFT Processor on FPGA Microchip Proposed for Mechanical Applications / Siti Lailatul Mohd Hassan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 145-156. ISSN 1823-5514 ; 2550-164X

Mohd Khairi, Nur Aliah and Ibrahim, Azmi and Ab Hamid, Hanizah (2019) Influence of pre-strain on the strain rate response of Ni-Ti shape memory alloy / Nur Aliah Mohd Khairi...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 157-166. ISSN 1823-5514 ; 2550-164X

Mohd Nadzri, Nur Insyirah and Mohd Amin, Norliyati (2019) A review of cathodic protection in repairing reinforced concrete structures / Nur Insyirah Mohd Nadzri and Norliyati Mohd Amin. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 183-198. ISSN 1823-5514 ; 2550-164X

Mohd Nawi, Al Alif Elmi and Chua Abdullah, Muhammad Ilman Hakimi and Abdollah, Mohd Fadzli (2018) Dispersion stability of hBN Nanoparticle in liquid phase with different dispersion agents / Al Alif Elmi Mohd Nawi...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 143-153. ISSN 1823-5514 ; 2550-164X

Mohd Noh, Hamidun and Mohamad, Nor Lailatul Izzatil Azwani and Bangau, Rolly (2020) Performance of hollow reinforced concrete beam in structural member / Hamidun Mohd Noh...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 1-11. ISSN 1823-5514 ; 2550-164X

Mohd Noor, Nurul Muthmainnah and Yusof, Ya’akub and Khairoll Anuar, Ikhmal Nazmi (2015) Implementation of Fuzzy Logic System for Motor Motion Generation Based on Electrooculogram / Nurul Muthmainnah Mohd Noor...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 143-155. ISSN 1823-5514 ; 2550-164X

Mohd Nor, Nor Aznan and Baharudin, B.T.H.T and Arifin, M.K.M. and Z., Leman (2019) Effect of compressed air and cutting speed on surface roughness of 6061 Aluminium Alloy / Nor Aznan Mohd Nor...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 53-62. ISSN 1823-5514 ; 2550-164X

Mohd Nor, Nor Aznan and Mohd Alisjabana, Syibli Syaddad and Seloraji,, Ghirran and Tee, Yean Men and Teh, Jun Xian and Baharudin, B.T.H.T. and Arifin, M.K.M. and Leman, Z (2019) Effect and optimization of cutting speed and depth of cut in half-immersion up-milling of 6061 aluminium alloy / Nor Aznan Mohd Nor...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 17-27. ISSN 1823-5514 ; 2550-164X

Mohd Ramli, Mohd Hanif and Mat Dzahir, Mohd Azuwan (2018) A new phenomenological-based rate-dependent hysteresis operator for hysteresis characterization / Mohd Hanif Mohd Ramli and Mohd Azuwan Mat Dzahir. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 142-153. ISSN 18235514

Mohd Razalli, Ammer Ezhar and Abd. Wahab, Dzuraidah and Mohd Ihsan, Ahmad Kamal Ariffin (2018) Durability Studies of Remanufacturable Components for Extended Life Cycle / Ammer Ezhar Mohd Razalli ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 177-189. ISSN 18235514

Mohd Resali, Mohd Sofwan and Salleh, Hanim (2017) Development of Multiple-Input Power Management Circuit for Piezoelectric Harvester / Mohd Sofwan Mohd Resali and Hanim Salleh. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 215-230. ISSN 1823-5514 ; 2550-164X

Mohd Resali, Mohd Sofwan and Salleh, Hanim (2017) Effect of Rubber Compound Treatment and PTFE Extension Beam on Piezoelectric Energy Harvester Power Density / Mohd Sofwan Mohd Resali and Hanim Salleh. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 199-214. ISSN 1823-5514 ; 2550-164X

Mohd Resali, Mohd Sofwan and Salleh, Hanim (2017) Wireless Condition Monitoring System for Rotating Machinery Powered by a Hybrid Vibration Based Energy Harvester / Mohd Sofwan Mohd Resali and Hanim Salleh. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 249-267. ISSN 18235514

Mohd Sabri, Norlina and Puteh, Mazidah and Md Sin, Nor Diyana (2017) Artificial intelligence technique in solving nano-process parameter optimization problem / Norlina Mohd Sabri...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 1-17. ISSN 1823-5514 ; 2550-164X

Mohd Saiah, Helmey Ramdhaney and Mohd Rafie, Azmin Shakrine and I. Romli, Fairuz (2018) Freestream Velocity Correction in Narrow Channels / Helmey Ramdhaney Mohd Saiah ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 54-66. ISSN 18235514

Mohd Salleh, Farrahshaida and Sulong1, Abu Bakar and Foudzi1, Farhana and Mohamed1, Intan Fadhlina and Azaman1, Natasha Emira and Mas’ood1, Najlaa Nazihah and Seong, Jin Park (2017) Flow Behaviour Characterization of Hydroxyapatite for Powder Injection Moulding (PIM) / Farrahshaida Mohd Salleh...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 77-88. ISSN 1823-5514 ; 2550-164X

Mohd Salleh, Norshariza and Ahmad Shauri, Ruhizan Liza and Nasir, Khairunnisa and Remeli, Nurul Hanani (2017) Fuzzy-PID Position Control of a Three Fingered Robot Hand for Grasping Varying Loads / Norshariza Mohd Salleh ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 61-77. ISSN 18235514

Mohd Suhaimi, Muhammad Farhan and Mohd Salleh, Noor Azlina (2018) A case study on the improvement of productivity and efficiency of a quality control line for a cutting tool manufacturer / Muhammad Farhan Mohd Suhaimi and Noor Azlina Mohd Salleh. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 222-239. ISSN 1823-5514 ; 2550-164X

Mohd Zin, Mohd Syazwan and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Wan Iskandar Mirza, Wan Imaan Izhan and Mat Isa, Ahmad Azlan and Mohamed, Zulkifli (2017) Modal And FRF Based Updating Methods For The Investigation Of The Dynamic Behaviour Of A Plate / Mohd Syazwan Mohd Zin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 175-189. ISSN 18235514

Mohd Zulkifli, Muhammad Nasrun Faris and Yahya, Mohamad Faizul (2018) 3D angle interlock woven fabric mechanical tensile strength based on various fabric weft densities / Muhammad Nasrun Faris Mohd Zulkifli and Mohamad Faizul Yahya. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 92-103. ISSN 1823-5514 ; 2550-164X

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi (2017) Evaluation of Thrust Force in Drilling of Woven Kenaf Fiber Reinforced Epoxy Composite Laminates / Suhaily Mokhtar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 148-168. ISSN 18235514

Muda, Rizamarhaiza and Sulaiman, Syazwan Liyana and Ahmad, Sufizar and Mohd Taib, Hariati (2018) Polyvinyl Alcohol/Chitosan/Silicon Dioxide (PVA/CS/Sio2) Beads For Removal Of Chromium (VI) Ions / Rizamarhaiza Muda...[et al.]. Journal of Mechanical Engineering (JMechE), 15. pp. 71-79. ISSN 1823-5514 ; 2550-164X

Muhalim, Nur Amanina Damira and Md Daud, Mohd Yusof and Hassan, Mohamad Zaki and Abdul Aziz, Sa’ardin and Abdul Raman, Norazmein and Sarip, Shamsul (2017) Compressive Behaviour and Energy Absorption of Copper Tube under Quasi Static and Ultrasonic Compression Test / Nur Amanina Damira Muhalim...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 169-184. ISSN 18235514

Muhammad Yusof, Khalissah and Abdullah, Bulan and Saad, Nor Hayati and Izzatina, Nasfati (2018) The effect of slurry erosion wear on boronized alloyed ductile iron (0.019 % Niobium and 0.145 % Vanadium) / Khalissah Muhammad Yusof ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 121-130. ISSN 18235514

Muhayat, Nurul and Triyono, Rizky Danu Rahmanto and Zubaydi, Achmad (2018) Effect of Tool Plunge Depth and Pin Profile on Mechanical Properties of Friction Stir Spot Welded AA5052 Joints / Nurul Muhayat...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 181-191. ISSN 1823-5514 ; 2550-164X

Muniandy, Komethi and Mohamad Ariff, Zulkifli and Abu Bakar, Azhar (2018) Online strain measurement during blown film extrusion using digital image correlation / Komethi Muniandy ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 154-165. ISSN 18235514

Mustapa, Mohd Sabri and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Rijal, Hom Bahadur (2017) Investigation of Thermal Comfort at Different Temperature Settings for Cooling in University Building / Mohd Sabri Mustapa ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 123-134. ISSN 18235514

N, Kapilan (2020) Comparative study on CI engine performance and emissions using a Novel Antioxidant Additive / N Kapilan. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 63-76. ISSN 1823-5514 ; 2550-164X

N. F. A., Shafie and A. I. S., Rahman and A., Yahya and U. Q. A., Mansor and A. M., Som and A. H., Nour and Z., Hassan and R. M, Yunus (2017) Performance of Ultrasonic-assisted Membrane Anaerobic System (UMAS) on Palm Oil Mill Effluent (POME) / Shafie N. F. A....[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 17-27. ISSN 1823-5514 ; 2550-164X

N. H., Mohamad Nor and M. H., Ismail and H., Husain and J. B., Saedon and M., Newishy (2019) Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 135-147. ISSN 1823-5514 ; 2550-164X

N. I., Ismail and A. H., Zulkifli and H., Yusoff and R. J., Talib and A.R., Hemdi and N. Mustapa, N. M. Muzammil (2017) Aerodynamic Performances of MAV Wing Shapes / N. I. Ismail...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 187-198. ISSN 18235514

N. V., David and Azlan, Mohd (2018) Moisture Absorption Properties and Shock Cushioning Characteristics of Bio-Based Polyurethane Foam Composites / David, N.V and Mohd Azlan. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 157-168. ISSN 18235514

N.F., Hadi, and M., Mohamad and N.H., Hamid (2019) Validation of corner beam-column joint’s hysteresis loops between experimental and modelled using HYSTERES program / N.F. Hadi...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 213-226. ISSN 1823-5514 ; 2550-164X

N.M., Khairuddin and Koto, Jaswar and A.R., Ain and J., Azhari and A., Najmie (2020) Experimental study on translation motion characteristics of Moored Symmetrical Semi-submersible in regular waves / Khairuddin, N.M....[et al.]. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 77-89. ISSN 1823-5514 ; 2550-164X

N.N.M., Zawawi and W.H., Azmi and A.A.M., Redhwan and M.Z., Sharif (2018) Thermo-physical properties of metal oxides composite Nanolubricants / N.N.M. Zawawi...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 28-38. ISSN 1823-5514 ; 2550-164X

Nasir, Norazne and Saad, Nor Hayati and Sahruddin, Fatin Syafinaz and Ab Wahab, Norrul Hafizan (2017) Fine Bone China Product using Ceramics Slip Rotary Moulding (CSRM) Technique / Norazne Nasir ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 31-42. ISSN 18235514

Nasir, R. M. and B.T., Ting, and Saad, A. Y. and S., Mridha (2017) Dry/wet sliding activation wear of pure Al / R. M. Nasir...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 157-174. ISSN 1823-5514 ; 2550-164X

Nawi, M.R.M. and Azhar, M.S.A. (2018) Aerodynamics Performance of Barn Swallow Bird at Top Speed : A Simulation Study / M.R.M. Nawi and M.S.A. Azhar. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 1-15. ISSN Journal of Mechanical Engineering (JMechE)

Nayak, I. and Rana, J. (2020) Precision multi-response optimization of performance characteristics in wire-cut electric discharge machining (WEDM) process / I. Nayak and J. Rana. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 39-54. ISSN 1823-5514 ; 2550-164X

Nazaruddin, N.A. and Abdul Rahim, P.S. and M., Rizamarhaiza and A. A. K, W.M. Hasif. and Azmi, M.Azham and Taib, H. and Ahmad, S. (2017) The Effect of Different Binder Compositions in Fabricating Silica Foam (SiO2) Via Replication Method / N.A.Nazaruddin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 53-62. ISSN 18235514

Negin, O. Aminian and I. Romli, Fairuz (2017) Study on the Potential of Airships as Urban Mass Public Transport in Malaysia / Negin O. Aminian and Fairuz I. Romli. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 221-232. ISSN 18235514

Nicholas, Hilary Nicholas and Magaswaran, Kumaresan and Jayapal, Vikneswary (2018) Fuel consumption reduction by increasing thermal efficiency through heating of fuel / Edmund Hilary Nicholas ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 103-110. ISSN 18235514

Nor Affandi, Nor Dalila and Abdul Razak, Nur Najiha (2020) Removal of Pigment from Textile Wastewater by Electrospun Nanofibre Membrane / Nor Dalila Nor Affand and Nur Najiha Abdul Razak. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 190-201. ISSN Journal of Mechanical Engineering (JMechE)

Nurhadiyanto, Didik and Mujiyono,, Angger Gufita and Riyadi, Prabowo Moecty and Baihaqi, Fatchurrohman and Pramana, Sena Budi (2020) Design of the MCCIS on the Gas- fueled motorcycle to overcome detonation in engine idling / Didik Nurhadiyanto...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 141-155. ISSN 1823-5514 ; 2550-164X

Nurzaki, I. and Abdullah, A. Saifizul and Ramli, R. (2017) Experimental Validation of Vehicle Dynamic Characteristics of a Virtual Heavy Vehicle Model / I. Nurzaki ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 131-143. ISSN 18235514

Omar, Rohaizat and Abdul Rani, Muhamad Norhisham and Wan Iskandar Mirza, Wan Imaan Izhan and Yunus, Mohd Azmi and Othman, Mohd Hakimi (2017) Finite Element Modelling and Updating for Bolted Lap Joints / Rohaizat Omar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 202-222. ISSN 18235514

Othman, Kamal and Abdul Ghani, Jaharah and Juri, Afifah and Ruslan Mohd, Mohd Shahfizal and Kassim, Shahir and Che Haron, Che Hassan (2020) Optimization of tool life and surface roughness for hypereutectic Al – si alloys in face milling / Kamal Othman...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 27-44. ISSN 1823-5514 ; 2550-164X

Othman, Nurul Atiqah and Che Zakaria, Noor Ayuni and Mohd Ramli, Mohd Hanif (2018) PLC system to optimize training device of upper limb spasticity / Nurul Atiqah Othman...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 127-141. ISSN 1823-5514 ; 2550-164X

P Prajadhiana, Keval. and Manurung, Yupiter HP and Zainir, Muhammad Zohdi and Yahya, Omar and Saedon, Juri and Shahriman, Mohd and Omar, Abdul Rahman and Kuntjoro, Wahyu and Kasim, Khairulnizam and Ishak, Dendi P. and Bauer, Alexander and Graf, Marcel (2018) Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 99-115. ISSN 18235514

Pangesty, Azizah and Todo, Mitsugu (2017) Preparation and Characterization of porous tubular scaffold made of PCL/PLCL blends for vascular tissue engineering / Azizah Pangesty and Mitsugu Todo. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 184-196. ISSN 18235514

Peck, Loo Kiew and Kian, Hen Chong (2017) Development of Fruit-Based Waste Material as Bioflocculant for Water Clarification / Peck Loo Kiew and Kian Hen Chong. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 1-10. ISSN 18235514

Petr, Lenfeld and Luboš, Běhálek and Martin, Borůvka (2018) Application of cryogenic grinding for filler preparation in the form of Coconut Nanocomposites into the Thermoplastic Matrix with the evaluation of properties while using different types of MAgPP Coupling agents / Petr Lenfeld...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 13-27. ISSN 1823-5514 ; 2550-164X

Priyan, M. Shunmuga and Siva, R. Sri (2019) Residual stress and wear studies of deep cryogenically treated SAE 52100 bearing steel / M. Shunmuga Priyan and R. Sri Siva. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 91-104. ISSN 1823-5514 ; 2550-164X

R., Rosmamuhamadani and R.E, Ibrahim and M.K., Talari and M., Yahaya, Sabrina and S., Sulaiman and M.I.S., Ismail (2018) Characterization of Aluminium-Silicon (Al-Si) cast alloy refined with Titanium Diboride (TiB2) and Scandium (Sc) / R. Rosmamuhamadani... [et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 62-70. ISSN 1823-5514 ; 2550-164X

Rabe, Martin and Kühn, Arno and Dumitrescu, Roman and Mittag, Tobias and Schneider, Marcel and Gausemeier, Jürgen (2018) Impact of Smart Services to Current Value Networks / Martin Rabe ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 1-11. ISSN 18235514

Rabilah, Rosniza and Budin, Salina and Jaafar, Talib Ria and Hashim, Siti Mardini (2017) Influence of Waste Plastic Binder on Sintered Properties of Injection Moulded M2 HSS / Rosniza Rabilah...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 197-206. ISSN 18235514

Rajendran Royan, Nishata Royan and Sulong, Abu Bakar and Mohd, Nor Yuliana Yuhana and Abdul Ghani, Mohd Hafizuddin and Ahmad, Sahrim (2017) Effect UV/O3 Modified Rice Husk on the Mechanical Properties of Recycle HDPE Rice Husk Composite / Nishata Royan Rajendran Royan ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 13-22. ISSN 18235514

Ram, Nathi and C. Sharma, Satish and K. Rajput, Arvind (2017) Compensated hole-entry Hybrid Journal Bearing by CFV Restrictor under Micropolar Lubricants / Nathi Ram...[et al.]. Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 31-42. ISSN 1823-5514 ; 2550-164X

Ramli, Azlan and Raja Abdullah, Raja Izamshah and Abu Bakar, Mohd Hadzley and Kasim, Mohd Shahir and A. Rahman, Muhamad Arfauz and Mohd Zakaria, Muhammad Akmal (2017) Investigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material / Azlan Ramli...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 118-134. ISSN 18235514

Ramli, Mohd Badli and Wahab, M.S. and Zain, B.A and Raus, A.A. and Kamarudin, K. and Sa`ude, N and Haq, R and M, Ibrahim and Ahmed, Aqeel (2017) Effect Of Incubation Temperature On Ikta’s Quail Breed With New Rolling Mechanism System / Mohd Badli Ramli...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 78-88. ISSN 18235514 (Submitted)

Ramli, Mohd Ikram and Sulong, Abu Bakar and Muhamad, Norhamidi and Muchtar, Andanastuti and Zakaria, Mohd Yusuf (2017) Rheological Properties Of Titanium Alloy (Ti6Al4V) – Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 87-96. ISSN 18235514

Ramly, Ramzyzan and Kuntjoro, Wahyu and Ab Ghani, Amir Radzi (2020) Honeycomb carbon sandwich composite panel under compressive load flat-wise: experimental analysis / Ramzyzan Ramly...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 13-26. ISSN 1823-5514 ; 2550-164X

Rashid, Helmi and Omar, Abdul Rahman and Ahmad, Ismail Nasiruddin and Mohamed, Zulkifli and Wan Fauzi, Wan Muhammad Syahmi and Mahmud, Zamalia and Haron, Rohani (2017) Motorcyclists’ Prolonged Riding Simulation: The Setup and Procedures / Helmi Rashid ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 197-208. ISSN 18235514 (Submitted)

Raveverma, P. and Ibrahim, M. and Sa’ude, N. and Yarwindran, M. (2018) Mechanical Behaviour and Compatibility Analysis of Thermoplastic Polyurethane/ Polycaprolactone-Based New Fused Deposition Modelling Filament Composite / P. Raveverma ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 116-128. ISSN 18235514

Razak, S. and Nawi, M.R.M. and Rehim, M.Z.A. and Azmi, W.H. (2018) Preparation Technique of SiO2/HFE 7000 Nanorefrigerant / S. Razak ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 132-140. ISSN 18235514

Razak, Zakaria and Sulong, Abu Bakar and Muhamad, Norhamidi and Md Radzi, Mohd. Khairol Fadzly and Tholibon, Dulina and Tharazi, Izdihar and Ismail, Nur Farhani (2017) Effect of Multi-walled Carbon Nanotube on Mechanical Properties of Kenaf/Polypropylene Composites / Zakaria Razak...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 107-117. ISSN 18235514

Razali, Muhamad Magffierah and Ab.Rashid, Mohd Fadzil Faisae and Abdullah Make, Muhammad Razif (2017) Optimization of Automotive Manufacturing Layout for Productivity Improvement / Muhamad Magffierah Razali ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 171-184. ISSN 18235514

Remeli, Muhammad Fairuz and Rosli, Mohd Arif Fikri and Bhathal Singh, Baljit Singh (2017) Investigation of the Thermosyphon Performance for Different Working Fluids / Muhammad Fairuz Remeli ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 144-152. ISSN 18235514

Rosli, Nor Ana and Alkahari, Mohd Rizal and Ramli, Faiz Redza and Sudin, Mohd Nizam and Maidin, Shajahan (2020) Influence of process parameters in Wire and Arc Additive Manufacturing (WAAM) process / Nor Ana Rosli...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 69-78. ISSN 1823-5514 ; 2550-164X

Roy, Rhitankar Saha and Lim, Chong Lye and Lim, Chin Guan and Adam, Nor Mariah (2020) ANSYS water-wind flow simulation to study pressure generated under various conditions to generate electricity using piezoelectric cells / Rhitankar Saha Roy...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 1-11. ISSN 1823-5514 ; 2550-164X

S., Jaichandar and D., Samuelraj and Kumar, M. Sathish (2018) Effects of varying injector opening pressure on the performance of a B20 JOME biodiesel fueled diesel engine / S. Jaichandar...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 17-31. ISSN 1823-5514 ; 2550-164X

S. Firdaus, H. M. and Halyani, M. Y. and Osman, M. H. and Maidin, N.A. and Ahmad, M. N. and A. Rahman, M. H. and Damanhuri, A. A. and Wahid, M. K. (2018) Acceptance of Electric Vehicle based on Pricing and Charging Station / H. M. S. Firdaus ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 190-200. ISSN 18235514

S. Suri, M. A. and Yahaya, N. A. and Hamzah, K. (2018) Study on the extraction process and optical properties of mangosteen pericarp for Dye Sensitized Solar Cell (DSSC) application / M. A. S. Suri ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 251-260. ISSN 18235514

Saad*, Idris and Abdullah, Nik Rosli and Ihsan Mamat, Aman Mohd and Ab Rashid, Wardatul Hayah and Saidon, Nur Hidayah Experimental Investigation of Diesel Engine Run with Waste Cooking Oil−Petrol Blends / Idris Saad...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 100-109. ISSN 18235514

Saffar, Seha and Jamaludin, Zamberi and Jafar, Fairul Azni (2017) Investigating the Influences of Automated Guided Vehicles (AGVs) as Material Transportation for Automotive Assembly Process / Seha Saffar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 47-60. ISSN 18235514

Sahwee, Zulhilmy and Mahmood, Aina Suriani and Abd. Rahman, Nazaruddin and Mohamed Sahari, Khairul Salleh (2018) UAV actuator fault detection through artificial intelligent technique / Zulhilmy Sahwee ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). ISSN 18235514

Sainan, Khairul Imran and Tijani, Alhassan Salami and Zakaria, Irnie Azlin and Wan Mohamed, Wan Ahmad Najmi (2018) Study of Multiple 2:1 and Single 1:1 inlet/outlet ratio for serpentine PEMFC performance / Khairul Imran Sainan ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 1-9. ISSN 18235514

Salim, Salim Mkubwa and I. Romli, Fairuz and Besar, Jailani and Negin, Ozve Aminian (2017) A Study on Potential Physical Hazards at Construction Sites / Salim Mkubwa Salim ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 207-222. ISSN 18235514

Samin, R. and Hao, N.C. and As’arry, A. and M. Rezali, K.A. and Nuawi, M.Z. (2018) Effect of Disc Brake Squeal with Respect to Thickness Variation : Experimental Modal Analysis / R. Samin ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 33-44. ISSN 18235514

Sa’ude, N and Ibrahim, M and Ibrahim, MHI and Wahab, MS and Haq, R and Marwah, OMF and Khirotdin, RK (2018) Additive Manufacturing of Copper-ABS Filament by Fused Deposition Modeling (FDM) / N Sa’ude ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 23-32. ISSN 18235514

Selamat, Farah Elida and Wan Izhan, Wan Hariz Iskandar and Baharudin, Bakhtiar Saffuan (2018) Design and Analysis of Centrifugal Pump Impeller for Performance Enhancement / Farah Elida Selamat ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 36-53. ISSN 18235514

Shaari, Nor Shamimi and Ismaill, Muhammad Hussain and Jumahat, Aidah and Goodall, Russell Sintering and dimensional analysis of Cu/CNTs via a powder metallurgy route / Nor Shamimi Shaari...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 117-130. ISSN 1823-5514 ; 2550-164X

Shah Aziz Shah, Mohamad Azam and Yunus, Mohd Azmi and Abdul Rani, Muhamad Norhisham and Tormodi, Nor Azela (2018) Closed Mode Separation of the Symmetrical Structure / Mohamad Azam Shah Aziz Shah...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 88-97. ISSN 18235514

Shahar,, Muhammad Syahmi and Mohd Salleh, Noor Azlina (2018) Cycle time improvement by lean Six Sigma for the Cutting Tool Production Line / Muhammad Syahmi Shahar and Noor Azlina Mohd Salleh. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 240-264. ISSN 1823-5514 ; 2550-164X

Sharudin, Hazim and Abdullah, Nik Rosli and Mamat, A.M.I. and Zaharin, M.S.M and A.R., Asiah (2017) Experimental investigation on physicochemical properties of Iso-Butanol additive in methanol-gasoline blends / Hazim Sharudin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 1-15. ISSN 1823-5514 ; 2550-164X (Submitted)

Sharudin, Hazim and Abdullah*, Nik Rosli and M. Yusoff, M. N. A. and Masjuki, H. H. and M. Ali, Obed (2017) Investigation of the Emission Characteristics of Iso-Butanol Additives on Methanol-Gasoline Blends using Spark Ignition Engine / Hazim Sharudin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 93-106. ISSN 18235514

Shing, Chee Lim and Weily, Khoo and Ching, Theng Koh (2017) Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers / Shing Chee Lim ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 246-254. ISSN 18235514

Shuib, Solehuddin and Ismail, Nur Faiqa and Yahya, Muhd Azman and Ahmed Shokri, Amran (2018) Analysis of an Improved Hybrid Stem Design for Total Hip Replacement (THR) / Solehuddin Shuib ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 205-2015. ISSN 18235514

Shuib*,, Solehuddin and Ahmad Fuzi, Amir Haqim and Sh Ahmad, Siti Mariam (2019) The design of reusable endosurgical grasper using compliant mechanism / Solehuddin Shuib...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 211-220. ISSN 1823-5514 ; 2550-164X

Sidik, Mohamad Fuad and Abdul Rahman, Siti Mariam and Wan Mohamed, Wan Mazlina (2017) Evaluation of Controller Strategies in Air Traffic Management for KLFIR Oceanic Sector / Mohamad Fuad Sidik ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 121-130. ISSN 18235514

Singh, Amares and Durairaj, Rajkumar and Lee, Kong Chian and Sia, Yaw Yoong (2018) Reliability Study of Lead Free Sn-3.8Ag-0.7Cu and Copper (Cu) Substrate based on the Microstructure, Physical and Mechanical Properties / Amares Singh...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 169-180. ISSN 18235514

Singh, Gurkamal Nain and Bharj, Rabinder Singh and Kumar, Rajan (2019) Numerical investigation on performance and emission characteristics of a diesel engine fired with methanol blended diesel fuel / Gurkamal Nain Singh...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 41-52. ISSN 1823-5514 ; 2550-164X

Siva, Gopalakrishnan and Jamaludin, Ummu Kulthum (2017) Investigation on Different Types of Blood Glucose Control System / Siva Gopalakrishnan and Ummu Kulthum Jamaludin. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 135-152. ISSN 18235514

Solihin, Zainoor Hailmee and Wisnoe, Wirachman and Zailani, Ramlan and Yusof, Noriah (2018) Design and Simulation of a Rectangular Solar Collector for the Green Tower Development / Zainoor Hailmee Solihin ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 106-123. ISSN 18235514

Sridhar,, Garimella and Babu, Poosa Ramesh Effect of cutting parameters on machining induced distortion in thin wall thin floor parts / Garimella Sridhar and Poosa Ramesh Babu. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 59-78. ISSN 1823-5514 ; 2550-164X

Starykov, Maksym (2020) Fatigue life assessment approaches comparison based on typical welded joint of chassis frame / Maksym Starykov. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 135-156. ISSN 1823-5514 ; 2550-164X

Subhas, Chandra Moi and Pradip, Kumar Pal and Asish, Bandyopadhyay and Ramesh, Rudrapati (2019) Effect of heat input on the mechanical and metallurgical characteristics of TIG welded joints / subhas Chandra Moi...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 29-40. ISSN 1823-5514 ; 2550-164X

Sudjatmiko, djatmiko. mlg@gmail. com and Soenoko, Rudy and Suprapto, Agus and Choiron, Moch. Agus (2017) Surface roughness and roundness optimization on turning process of Aluminium Alloy with Taguchi Method / Sudjatmiko … [et al.]. Journal of Mechanical Engineering (JMechE), 14 (1). pp. 97-107. ISSN 1823-5514 ; 2550-164X

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Kharul Anuar and Baharudin, B.T Hang Tuah and Jaafar, Che Nor Aiza and Shah Ismail, Mohd Idris (2017) Optimization of the Parameters for Surface Quality of the Open-source 3D Printing / Nor Aiman Sukindar...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 33-43. ISSN 1823-5514 ; 2550-164X

Sulaiman*, Mohd Shahar and Manurung, Yupiter HP and Graf, Marcel and Bauer, Alexander (2018) Analysis of Weld Induced Distortion of Butt Joint using Simulation and Experimental Study / Mohd Shahar Sulaiman ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 78-89. ISSN 18235514

Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira and Marsi, Noraini (2018) Spectroscopic Studies of Oils and Its Synthesized Bio-Polymer / Nurulsaidatulsyida Sulong ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 50-60. ISSN 18235514

Suresh, Sangeeth and Abdul Hamid, Darulihsan and Yazid, MZA and Che Daud, Nur Rusydina and Mohd Din, Nik Nur Liyana (2017) An Investigation into the Impact of Flexural Elastic Modulus on the Dimensional Instability in CNC Turning of Titanium Alloy Grade 5 - Ti6Al4V / Sangeeth Suresh...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 73-85. ISSN 18235514

Taleghani, H. and Hassan, M.K and Abdul Rahman, R. Z. and Che Soh, A. (2018) Improving regenerative braking strategy using genetic algorithm for electric vehicles / H. Taleghani ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 121-130. ISSN 18235514

Talib, R.J. and Basri, M. Hisyam and Ismail, N.I. and Rabilah, R. (2017) Influence of Iron Oxide Powders on Braking Performance of Brake Friction Materials / R.J. Talib...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 129-142. ISSN 18235514

Tamjidillah, Mastiadi and Budi Santoso, Purnomo (2017) The Model of Optimization for Parameter in the Mixing Process of Water Treatment / Mastiadi Tamjidillah...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 113-122. ISSN 1823-5514 ; 2550-164X

Tayser, Sumer Gaaz and Sulong, Abu Bakar and H. Kadhum, Abdul Amir (2017) Influence of Sulfuric Acid on the Tensile Properties of Halloysite Reinforced Polyurethane Composite / Tayser Sumer Gaaz...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 1-10. ISSN 1823-5514 ; 2550-164X

Teruna, Daniel Rumbi (2019) Seismic behavior of RC building with and without buckling restrained braces / Daniel Rumbi Teruna. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 159-173. ISSN 1823-5514 ; 2550-164X

Tham, Ghalib and Mohamad Nor, Nur Hafiez and Faruqi, Mohamad and Saedon, Juri (2017) Prediction of Weld Bead Geometry for Small-Wire Submerged Arc Welding in 1G position / Ghalib Tham...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 145-156. ISSN 18235514

Tharazi, Izdihar and Muhamad, Norhamidi and Ismail, Nur Farhani and Md Radzi, Mohd Khairul Fadzly and Razak, Zakaria and Tholibon, Dulina and Akhtar, Majid Niaz (2017) Effects of Fiber Content and Processing Parameters on Tensile Properties of Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite / Izdihar Tharazi...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 65-76. ISSN 1823-5514 ; 2550-164X

Tharazi, Izdihar and Sulong, Abu Bakar and Mohd Salleh, Farrahshaida (2020) Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 131-144. ISSN 1823-5514 ; 2550-164X

Triyono, Sri Hastuti and Neng, Sri Suharty (2017) Shear Strength of the Mixed Adhesive Joint Silyl Modified Polymer-Epoxy in Single Lap Joint Aluminum Triyono / Sri Hastuti and Neng Sri Suharty. Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 235-248. ISSN 18235514

Tuan Rahim, Tuan Noraihan Azila and Md Akil, Hazizan and Abdullah, Abdul Manaf and Mohamad, Dasmawati and Ahmad Rajion, Zainul (2019) Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling (FDM) Process / Tuan Noraihan Azila Tuan Rahim...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 75-90. ISSN Special Issue Engineering for Humanity Vol 2

U.Q.A., Mansor and A., Ismail and A., Yahya and N.F.A., Shafie and A. M., Som and A.H., Nour and R., Yunus (2017) Kinetic Study for Ultrasonic assisted Membrane Anaerobic System (UMAS) Treating Decanter Palm Oil Mill Effluent (POME) / Mansor U.Q.A....[et al.]. Special Issue 2017 Vol 1: Frontiers in Sustainable Energy Research for Humanity, SI 2 (2). pp. 45-56. ISSN 18235514

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian Anthropometric Data for Automotive Applications / Muhammad Abdulazeez Uba ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 68-88. ISSN 18235514

Ubaidillah, Ubaidillah and Hadi, Syamsul and Harjana, Harjana and Hairuddin, Khairunnisa and Mazlan, Saiful Amri (2018) Design and fabrication of magnetorheological elastomer vibration isolator / Ubaidillah ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 192-210. ISSN 18235514

V., Kausalyah and B.M.F., Norfiza Athyrah and S., Shasthri (2018) Mathematical Modelling of Plastic Injection Molding Process Using Central Composite Design (CCD) Sampling and PRSM / Kausalyah V. ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 226-238. ISSN 18235514

V. Chowdary, Boppana and Jahoor,, Riaz and Ali,, Fahraz and Trishel, Gokool (2019) Optimisation of surface roughness when CNC Turning of Al-6061: Application of Taguchi Design of experiments and genetic algorithm / Boppana V. Chowdary...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (2). pp. 77-91. ISSN 1823-5514 ; 2550-164X

Venkataraman, Mohanapriya and Militký, Jiří and Mishra, Rajesh and Jandová, Soňa (2018) Unconventional measurement methods and simulation of aerogel assisted thermoregulation / Mohanapriya Venkataraman ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 62-96. ISSN 18235514

Verma,, Himanshu and Kumar, Sandeep and Bharj, Rabinder Singh and Kumar, Rajan (2020) Design and development of the front wheel hub for All-Terrain Vehicle (ATV) / Himanshu Verma...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 49-62. ISSN 1823-5514 ; 2550-164X

W., Kuntjoro and A. H. M., Saleh and R. E. M., Nasir and M. R., Abdullah* and M. G., Suada (2018) Flight thrust performance of quadcopter / W. Kuntjoro...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 210-221. ISSN 1823-5514 ; 2550-164X

Wan Fauzi, Wan Muhammad Syahmi and Omar, Abdul Rahman and Rashid, Helmi (2017) Enhancement of Postura MotergoTM: From an Ergonomic Motorcycle Test Rig to a Full-Scale Simulator / Wan Muhammad Syahmi Wan Fauzi ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 43-59. ISSN 18235514

Wan Fauzi, Wan Muhammad Syahmi and Omar, Abdul Rahman and Rashid, Helmi and Saman, AliasMohd (2017) Pillion Simulation System (PISIS): An Exclusive System for Simulating Pillion’s Motorcycling Experience / Wan Muhammad Syahmi Wan Fauzi...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 91-109. ISSN 18235514

Wan Ibrahim, Mohd Haziman and Yee, Hooi Min and Abdul Hadi, Mohd Nasir (2019) Soap film of tensioned fabric structure in the form of handkerchief surface / Mohd Haziman Wan Ibrahim and Mohd Nasir Abdul Hadi and Yee Hooi Min. Journal of Mechanical Engineering (JMechE), 16 (3). pp. 41-50. ISSN 1823-5514 ; 2550-164X

Wan Iskandar Mirza, Wan Imaan Izhan and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Ahmad Basri, Ahmad Burhani and Mat Isa, Ahmad Azlan (2017) Frequency Based Substructuring Method for the Investigation of the Dynamic Behaviour of a Beam Structure / Wan Imaan Izhan Wan Iskandar Mirza ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 142-154. ISSN 18235514

Wan Mansor, Wan Nuha and Md Tahir, Nurul Hidayah and Abd Ghani, Jaharah and Che Haron, Che Hassan and Nuawi, Mohd Zaki and Rizal, Muhamad (2017) Tool Wear Condition Monitoring using Slip Ring and Accelerometer System in Milling AISI P20 Tool Steel / Wan Nuha Wan Mansor...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 63-72. ISSN 18235514

Wan Mohamed, Wan Mazlina and Shuib, Adibah (2018) Optimisation Model based Dashboard for Managing Airport Aeronautical Revenues / Wan Mazlina Wan Mohamed and Adibah Shuib. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 124-141. ISSN 18235514

Wan Zulkifli, Wan Amirul Shafiz and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Yusuf, Yusliza (2017) Effect of Nitriding Temperature and Nitriding Time on MgAZ91D Alloy / Wan Amirul Shafiz Wan Zulkifli...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 177-184. ISSN 18235514

Wei, Hong Tan and Yong, Hooi Ak (2020) Analysis of sound transmission loss on perforated-natural fibre sandwich panels / Wei-Hong Tan and Yong-Hooi Ak. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 27-38. ISSN 1823-5514 ; 2550-164X

Weily, Khoo and Ching, Theng Koh and Shing, Chee Lim (2017) Synthetic and Natural Fibrous Scaffolds for Soft Tissue Engineering Applications / Weily Khoo ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 223-233. ISSN 18235514

Wirachman, Wisnoe and M. Nasir, Rizal E. and Saarani, Wan Aizad Mu and Mohd Saad, Nornashiha and Afiq Mamud, Mohd Amirul (2017) Wind Tunnel Tests of UiTM Blended Wing Body - Unmanned Aerial Vehicle (BWB-UAV) Prototype / Wirachman Wisnoe ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 234-245. ISSN 18235514

Y, Aiman and S, Syahrullail (2018) The Effect of Low Temperature Test on Lubrication Performance of Palm Kernel Oil with Addition of PPD as A Lubricant (ASTM D4172) / Aiman. Y and Syahrullail. S. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 142-156. ISSN 18235514

Y. M. Ahmed, Mahmoud (2019) Parametric study on taper-ended tubular solid propellant grains / Mahmoud Y. M. Ahmed. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 79-98. ISSN 1823-5514 ; 2550-164X

Y.S., Kong and Abdullah, S. and Omar, M.Z. and Haris, S.M. and D., Schramm and T., Bruckmann (2017) The Need to generate a Force Time History Towards Life Assessment of a Coil Spring / Y.S. Kong...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 11-26. ISSN 18235514

Yahya,, Omar and HP Manurung, Yupiter and Sulaiman,, Mohd Shahar and Prajadhiana,, Keval and Omar, Abdul Rahman and Kuntjoro, Wahyu (2018) Virtual manufacturing for prediction of Martensite Formation and Hardness Value induced by Laser Welding Process using Subroutine Algorithm in MSC Marc/Mentat / Omar Yahya...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 107-125. ISSN 1823-5514 ; 2550-164X

Yasuyuki, Morita and Fuga, Matsubara and Matsubara, Toku and Yang, Ju (2018) Use of a Tendon/Ligament Cell Sheet with Mesenchymal Stem Cells and Cyclic Stretch Stimulus for Tendon / Ligament Tissue Restoration / Yasuyuki Morita...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 1-11. ISSN 18235514

Yeshiwas, Zeradam and A., Krishniah (2020) Spiral toolpath definition and G-code generation for single point incremental forming / Zeradam Yeshiwas and A. Krishniah. Journal of Mechanical Engineering (JMechE), 17 (1). pp. 91-102. ISSN 1823-5514 ; 2550-164X

Yunus, Mohd Azmi and Aziz Shah, Mohamad Azam Shah and Abdul Rani, Muhamad Norhisham and Wan Iskandar Mirza, Wan Imaan Izhan and Kushairi, Sahril (2017) Experimental and Finite Element Analysis of Laser Stitch Welded Structure / Mohd Azmi Yunus ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 155-162. ISSN 18235514

Yusof, Zarina and A.Rasid, Zainudin and Mahmud, Jamaluddin (2018) The active strain energy tuning on the parametric resonance of composite plates using finite element method / Zarina Yusof...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (1). pp. 104-119. ISSN 1823-5514 ; 2550-164X

Yusoff, H. and Suhaimi, S. and Hyie, K.M. and Iswadi, N. and Farhan, A. (2018) Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514

Yussuf, Ummu Raihan and Hashim, Hadzli and Johari, Juliana and Mohd Sampian, Ahmad Faiz and Abdullah, Noor Ezan and Khairuzzaman, Noor Aishah and Maskom, Mohamad Azrif (2017) Inference Analysis of Dry Rubber Content Capacitance Properties in Discriminating Type of Rubber Clones / Ummu Raihan Yussuf...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 157-165. ISSN 1823-5514 ; 2550-164X

Yusuf, Yusliza and Jaafar, Abdul Rahim and Omar, Noririnah and Azlan, Umar Al Amani (2017) The Influence of Heat Treatment on the Microstructure and Hardness Properties of Ti6Al4V and MgAZ91D Alloys / Yusliza Yusuf...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 167-176. ISSN 18235514

Z., Hamdi Cherif and Ch., Kandouci (2020) Dynamic characteristics of multi-disk shaft system using the vectors of solution coefficients / Z. Hamdi Cherif and Ch. Kandouci. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 95-115. ISSN 1823-5514 ; 2550-164X

Zailan, Farrah Diyana and Ruey, Shan Chen and Ahmad, Sahrim and Shahdan, Dalila and Baharin, Khairunnisa Waznah (2017) Influence of Processing Conditions on Mechanical Behaviours of Thermoplastic Natural Rubber/ Polyaniline Blend / Farrah Diyana Zailan...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 225-235. ISSN 18235514

Zailani, Ramlan and Kamarudin, Khairul Ashraf and Raja Deris, Raja Razuan and Ismail, Khudzir (2017) Enhancing Hydrogen Production From The Pyrolysis Of Oil Palm EFB by Alkali Metal Oxides / Ramlan Zailani ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 236-246. ISSN 18235514

Zainuddin, Argustina and Kuzaiman, Nur Asiah and Mohd Salleh, Noor Azlina and Kasolang, Salmiah (2018) Quality green energy supply chain management practices in Malaysian / Argustina Zainuddin...[et al.]. Journal of Mechanical Engineering (JMechE), 15 (2). pp. 1-12. ISSN 1823-5514 ; 2550-164X

Zainuddin, Argustina and Kuzaiman, Nur Asiah and Mohd Salleh, Noor Azlina and Kasolang, Salmiah (2019) Quality green lean energy leadership management practices in Malaysian automotive companies / Argustina Zainuddin...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 149-158. ISSN 1823-5514 ; 2550-164X

Zainudin, Azlan and Chee, Kiong Sia and Pauline, Ong and Narong, Oh Lai Ching and Muhd Nor, Nik Hisyamudin (2017) Potential of Palm Oil Fuel Ash (POFA) Layers as Secondary Raw Material in Porcelain Stoneware Application / Azlan Zainudin...[et al.]. Journal of Mechanical Engineering (JMechE), SI 2 (2). pp. 71-81. ISSN 1823-5514 ; 2550-164X

Zainudin, Mahfuzah and Ismail, Muhammad Hussain (2017) Characteristic Of The YTTRIA Stabilized Zirconia (YSZ) for Ceramic Injection Moulding by Using Palm Stearin as a Primary Binder / Mahfuzah Zainudin and Muhammad Hussain Ismail. Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 133-143. ISSN 18235514

Zainudin, Mohd Harris Fadhilah and Khashi’ie, Najiyah Safwa and Ab Rahim, Muhammad Saiful Ridzwan (2018) Investigation of the Quality and Mechanical Properties for Spot Welding of Reworked Galvannea and High Strength Steel (HSS) / Mohd Harris Fadhilah Zainudin ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 147-155. ISSN 18235514

Zakaria, Irnie Azlin and Wan Mohamed, Wan Ahmad Najmi and Mohd Ihsan Mamat, Aman and Sainan, Khairul Imran and Mat Nawi, Muhad Rozi and Najafi, Gholam Hassan (2018) Numerical analysis of Al2O3 Nanofluids in serpentine cooling plate of PEM fuel cell / Irnie Azlin Zakaria...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 2-13. ISSN 1823-5514 ; 2550-164X

Zakaria, Mohd Hafizu and Che Ghani, Saiful Anwar and Wan Harun, Wan Sharuzi and Zaulkafilai, Zuriadi and Mohamed, Siti Rohaida (2017) Fabrication of Aluminium Internally Cooled Cutting Tool by Means of Selective Laser Melting (SLM) / Mohd Hafizu Zakaria...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 185-198. ISSN 18235514

Zakaria, Mohd Yusuf and Sulong, Abu Bakar and Ramli, Mohd Ikram and Raza, Muhammad Rafi (2017) Determination of Critical Powder Loading of Titanium-Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks / Mohd Yusuf Zakaria...[et al.]. Journal of Mechanical Engineering (JMechE), SI 3 (1). pp. 11-21. ISSN 1823-5514 ; 2550-164X

Zakaria, N. J. and Zamzuri, H. and Mohamed Ariff, M. H. and Azmi, M. Z and Hassan, N. (2018) Lane change behaviour recognition using neural entwork / N. J. Zakaria ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 1-19. ISSN 18235514

Zakaria,, Muhammad Razlan and Abdul Kudus, Muhammad Helmi and Md Akil, Hazizan and Ahmad Rasyid, Mohd Fadli and Salim, Muhamad Saifuddin and Mohd Thirmizir, Mohd Zharif (2018) Dielectric performance of Hybrid Carbon Nanotube-Alumina Filled Epoxy Nanocomposites / Muhammad Razlan Zakaria...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 180-189. ISSN 18235514

Zerrout, Amar and Khelil, Ali and Loukarfi, Larbi (2020) Heat transfer of swirling multi jets impinging system / Amar Zerrout...[et al.]. Journal of Mechanical Engineering (JMechE), 17 (2). pp. 93-108. ISSN 1823-5514 ; 2550-164X

Zubair, Ahmad Faiz and Abu Mansor, Mohd Salman (2018) Automatic Feature Recognition of Chamfer and Fillet for Turning Part Model by Volume Decomposition Method / Ahmad Faiz Zubair and Mohd Salman Abu Mansor. Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 204-216. ISSN 18235514

Book Section

Anis, Ahmad Lutfi (2018) Microstructural and mechanical properties of welded Ti-15-3 beta titanium alloy using gtaw with boron-modified fillers / Ahmad Lutfi Anis. In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Endut, Ahmad Saruddin (2018) Responsive internal program evaluation as an quality monitoring mechanism alternative at HEI in Malaysia: A case study / Ahmad Saruddin Endut. In: The Doctoral Research Abstracts. IGS Biannual Publication, 18 (18). Institute of Graduate Studies, UiTM, Shah Alam.

Monograph

Ying, Ainaliana (2015) Univariate forecasting model on demand of forklift at PBKSB and Box-Jenkins Methodology / Ainaliana Ying. Industrial / Practical Training Report. Bachelor of Science (Hons.) Statistics, Kota Bharu. (Unpublished)

Thesis

Abd Manap, Muhammad Faris (2017) Mechanics of Total Hip Replacement (THR): The effect of inclination and anteversion angle on the performance of epoxy UHMWPE acetabular cup / Muhammad Faris Abd Manap. Masters thesis, Universiti Teknologi MARA.

Ismail, Al Emran (2003) Crack behavior of heat treated sintered steel under cyclic loading / Al Emran Ismail. Masters thesis, Universiti Teknologi MARA.

Ab Rahman, Azhan (2005) Performance analysis on the effect of stoichiometric air fuel ratio and ignition strength for spark ignition engine / Azhan Ab Rahman. Masters thesis, Universiti Teknologi MARA.

Abdul Hamid, Ahmad Hussein (2008) Investigation of swirl injectors and supersonic nozzles for the development of a meso-scale thrust chamber / Ahmad Hussein Abdul Hamid. Masters thesis, Universiti Teknologi MARA.

Ahmad Farid, Najmuddin (2003) A study on the implementation of intelligent vehicle in Malaysia / Ahmad Farid Najmuddin. Degree thesis, Universiti Teknologi MARA.

Alias, Siti Khadijah (2010) The effects of niobium addition on mechanical and physical properties of austempered ductile iron / Siti Khadijah Alias. Masters thesis, Universiti Teknologi MARA.

Anuwar, Fahteem Hamamy (2012) Classification of transient disturbance using Wavelet based support vector machine / Fahteem Hamamy Anuwar. Masters thesis, Universiti Teknologi MARA.

Azmi, Fariz Shazwan (2009) Investigation on the effects of spark plug on engine performance / Fariz Shazwan Azmi. Degree thesis, Universiti Teknologi MARA.

Ghazali, Farizah Adliza (2010) Effects of various environments on tensile properties, flexural properties and fracture toughness of kenaf fibre reinforced unsaturated polyester (KFRP) composites / Farizah Adliza Ghazali. Masters thesis, Universiti Teknologi MARA.

Hatta, Faizatul Farah (2006) Studies on alkaline solid polymer blends electrolyte for batteries / Faizatul Farah Hatta. Masters thesis, Universiti Teknologi MARA.

Md Saad, Junaidah (2010) The effect of fuel additives on performance and emission of four stroke engine / Junaidah Md Saad. Degree thesis, Universiti Teknologi MARA.

Mohamad, Khairol Izwan (2009) Conceptual design of human powered hydrofoil / Khairol Izwan Mohamad. Degree thesis, Universiti Teknologi MARA.

Mokhtar, Ernieza Suhana (2008) Water quality monitoring using lowcost digital camera / Ernieza Suhana Mokhtar. Masters thesis, Universiti Teknologi MARA.

Ramli, Muhammad Afif Arafat (2009) Influence of microstructures on the quality of welding joints / Muhammad Afif Arafat Ramli. Degree thesis, Universiti Teknologi MARA.

Saleh, Marziatul Akhtar (2006) Develop IR decoder with alarm using PIC16F84A MCU / Marziatul Akhtar Saleh. Degree thesis, Universiti Teknologi MARA.

Subuki, Istikamah (2010) Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki. PhD thesis, Universiti Teknologi MARA.

Wan Chek, Wan Ahmad Saufi (2009) Design and fabrication process of the fuel cell powered UAV / Wan Ahmad Saufi Wan Chek. Degree thesis, Universiti Teknologi MARA Shah Alam.

Zainudin, Anaz Nazren (2010) CFD study of lift and drag behavior of stretched hemisphere in a fully immersed flow using STAR-CD / Anaz Nazren Zainudin. Degree thesis, Universiti Teknologi MARA.

Student Project

Sikh Omar, Muhammad Ridhwan and Sabirin, Muhammad Razif and Omar, Shafie (2002) To study the effect of different sintering temperature on ferum hydroxide / Muhammad Ridhwan Sikh Omar, Muhammad Razif Sabirin and Shafie Omar. [Student Project] (Unpublished)

Che Omar, Mohd Zawahir (2003) The making of riveted joint by dimpling process to increase the strength / Mohd Zawahir Che Omar. [Student Project] (Unpublished)

Abdullah, Azrol Hisham (2003) FKM torsion test machine (A student model) / Azrol Hisham Abdullah. [Student Project] (Unpublished)

Abd Malik, Zuhaili (2016) Design analysis of 35 MT concentric passive heave compensator / Zuhaili Abd Malik. [Student Project] (Unpublished)

Abd Rahman, Farah Aliah (2017) Thermal survey in autoclave to determine the thermocouple and mould tool position / Farah Aliah Abd Rahman. [Student Project] (Unpublished)

Ahamad, Muzafar and Abdul Ghani, Mamat Tarmizi and Mohd Ehsan, Musa (1996) Prodstar - an application of MRP II software to production planning and control / Muzafar Ahamad,Mamat Tarmizi Abdul Ghani and Musa Mohd Ehsan. [Student Project] (Unpublished)

Ayob, Aizat Fadzli (2017) Effect of volume cavity at various distances for thermal cooling pumping jet device / Aizat Fadzli Ayob. [Student Project] (Unpublished)

Jamaludin, Muhamad Haziq (2017) Simulation of Quick Gear Shifter (QGS) system on a single-seated open wheel vehicle using Matlab (Simulink) \ Muhamad Haziq Jamaludin. [Student Project] (Unpublished)

Mansor, Muhammad Asyraf (2017) Design and fabricate the cleaning cum cooling system for downdraft gasifier / Muhammad Asyraf Mansor. [Student Project] (Submitted)

Maswan, Nor Maisarah (2016) Experimental study on effects of nozzle shape and diameter on heat transfer using pumping mechanism device / Nor Maisarah Maswan. [Student Project] (Unpublished)

Mohamad Fuad, Muhammad Fikri (2017) Optimization of turning operation toward surface quality using Response Surface Methodology (RSM) / Muhammad Fikri Mohamad Fuad. [Student Project] (Unpublished)

Mohd Din, Muhammad Hafiz (2017) Effect of nozzle diameter and volume cavity at various distances for electronic cooling / Muhammad Hafiz Mohd Din. [Student Project] (Unpublished)

Noor Shamshidi, Mohd Akmal Affiq (2017) Design and analysis of sliding wear mechanism in electric train application / Mohd Akmal Affiq Noor Shamshidi. [Student Project] (Unpublished)

Rabion, Noor Aishah (2016) Effect on swept volume on cooling using pumping mechanism based device / Noor Aishah Rabion. [Student Project] (Unpublished)

Razali, Muhamad Hakim (2017) The design of solar hot water system using recycle item / Muhamad Hakim Razali. [Student Project] (Unpublished)

Sudin, Mohd Yussof (2020) Numerical modelling on the effects of flow rates to the velocity profiles in serpentine microfluidic structure / Mohd Yussof Sudin. [Student Project] (Unpublished)

Research Reports

Hamid, Hasnizah (2005) Mesin layan diri tiket wayang / Hasnizah Hamid. [Research Reports] (Unpublished)

Abdullah, Samihah and Amat Mushim, Mohd Aswad and Md Sharif, Juliana (2010) Design of a small size High Frequency (HF) helical antenna / Samihah Abdullah, Mohd Aswad Amat Mushim and Juliana Md Sharif. [Research Reports] (Unpublished)

Ibrahim, Intan Rahayu and Mohd Ali, Yusnita (2009) Development of microcontroller based integrated control system for an adjustable pitch and yaw wind turbine for the maximum wind energy extraction in Northern Strait of Malacca Region / Intan Rahayu Ibrahim, Yusnita Mohd Ali. [Research Reports] (Unpublished)

This list was generated on Thu Mar 4 05:09:48 2021 +08.