Items where Subject is "Hoisting and conveying machinery"

A

A. Bakar, Azamuddin and Annuar, Akmal Zulhilmi and Mazwan, Amzar Muizzuddin and Ikhwan, Ifwat Umar and Azizan, Amiruddin Arif Climber hand truck / Azamuddin A. Bakar ... [et al.]. [Student Project]

Alias, Mohd Norhaslan (2008) Fuzzy based intelligent control system for elevator / Mohd Norhaslan Alias. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Alias, Mohd Norhaslan and Karim, Jamilah (2008) Fuzzy based intelligent control system for elevator: article / Mohd Norhaslan Alias and Jamilah Karim. pp. 1-6.

D

Dzulhelmy, Muhammad Danish (2022) To design and fabricate of an innovative multipurpose hand truck / Muhammad Danish Dzulhelmy. [Student Project] (Unpublished)

E

Edzrizar, Muhammad Ekhwan Farhan (2023) Tri-wheel trolley with adjustable holder / Muhammad Ekhwan Farhan Edzrizar. [Student Project] (Unpublished)

Edzrizar, Muhammad Ekhwan Farhan and Abdul Rahim @ Ibrahim, Abdul Hadi (2023) Tri-wheel trolley with adjustable holder / Muhammad Ekhwan Farhan Edzrizar and Abdul Hadi Abdul Rahim @ Ibrahim. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

F

Fauzi, Muhammad Irsyad (2024) Development of a manually operated crane / Muhammad Irsyad Fauzi. [Student Project] (Unpublished)

I

ishak, Nik Mohd Ikrami and Mohamad Zali, Mohd Sabri (2003) A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. [Student Project] (Unpublished)

K

Khif Noor, Badrul Amin (2022) Crane accidents in construction site from contractors perspective. [Student Project] (Unpublished)

M

Md Said, Jamaliah Binti (2025) Nanosilica-reinforced hybrid polymer composites for restoration of damaged piping systems. PhD Thesis , Universiti Teknologi MARA, Shah Alam .

Mohd Hafiz, Muhammad Hakim (2017) Experimental aerodynamics of washout twist morphing MAV wing / Muhammad Hakim Mohd Hafiz. [Student Project] (Unpublished)

Mohd Juzaila, Muhamad Husain (2023) Mechanical and design of trolley stair climber / Muhamad Husain Mohd Juzaila. [Student Project] (Unpublished)

Mohd Juzaila, Muhamad Husain and Kamardin, Nur Kamarliah and Yusuf, Ahmad Idzwan (2023) Designed, analyzed and fabricated of mechanical trolley stair climber / Muhamad Husain Mohd Juzaila, Nur Kamarliah Kamardin and Ahmad Idzwan Yusuf. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Mohd Suhardi, Muhammad Luqman and Ahmad, Nurulnatisya (2023) Semi-automatic collecting load trolley / Muhammad Luqman Mohd Suhardi and Nurulnatisya Ahmad. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Mohd Zaki, Fatin Nabila (2023) Design and fabrication of automated mini forklift / Fatin Nabila Mohd Zaki. [Student Project] (Unpublished)

Mohd Zaki, Fatin Nabila and Kamardin, Nur Kamarliah and Yusuf, Ahmad Idzwan (2023) Design and fabrication of automated mini forklift / Fatin Nabila Mohd Zaki, Nur Kamarliah Kamardin and Ahmad Idzwan Yusuf. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Mohd Zaki, Muhammad Luqman and Ab Latif, Najibah (2022) Foldable multifunction hand trolley / Muhammad Luqman Fahmi Mohd Zaki and Najibah Ab Latif. In: Prototype Design Collection Series 1.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-213 . ISBN 978-967-0033-07-5.

Mohd Zin, Muhammad Saiful Aiman (2023) Design and fabrication of adjustable wide multifunctional trolley / Muhammad Saiful Aiman Mohd Zin. [Student Project] (Unpublished)

Mohd Zin, Muhammad Saiful Aiman and Mohd Yusof, Ab Aziz (2023) Adjustable wide multifunctional trolley / Muhammad Saiful Aiman Mohd Zin and Ab Aziz Mohd Yusof. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

N

Norazam, Noramir Luthfi (2025) Design, analysis and fabricate remote controlled mini forklift. [Student Project] (Unpublished)

R

Roslan, Ammar Zafri (2024) Design, analysis and fabrication of automated forklift / Ammar Zafri Roslan. [Student Project] (Unpublished)

S

Saiful Adli, Muhammad Ashraf (2022) Design, analysis and fabrication of staircase climbing trolley / Muhammad Ashraf Saiful Adli. [Student Project] (Unpublished)

Saiful Adli, Muhammad Ashraf and Zainal Abidin, Nurrul Amilin (2022) Design, analysis and fabrication of staircase climbing trolley / Muhammad Ashraf Saiful Adli and Nurrul Amilin Zainal Abidin. In: Prototype Design Collection Series 1.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-213 . ISBN 978-967-0033-15-0.

Shnawa, Ahmed Abbas (2021) Multi-scale modelling for failure analysis of various composite laminates under biaxial loading / Ahmed Abbas Shnawa. Masters Thesis , Universiti Teknologi MARA .

Suhaimi, Muhammad Syahrin (2022) Development of an adjustable-motorized wheelbarrow / Muhammad Syahrin Suhaimi. [Student Project] (Unpublished)

Y

Ying, Ainaliana (2015) Univariate forecasting model on demand of forklift at PBKSB and Box-Jenkins Methodology / Ainaliana Ying. Industrial Training. Bachelor of Science (Hons.) Statistics , Kota Bharu . (Unpublished)

Z

Zainal Abidin, Nurrul Amilin and Fauzi, Muhammad Irsyad (2025) Stress analysis of mini compact manually operated crane design. In: Prototype Design and Research Collection Series 1.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 36-38 . ISBN 978-967-0033-63-1.