Items where Subject is "T Technology > TJ Mechanical engineering and machinery > Power resources"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | H | J | K | L | M | N | O | R | S | T | W | Z
Number of items at this level: 42.


ID21104 Arifin, Azman (2003) Energy consumption: Characteristics and user’s attitude / Azman Arifin. Degree thesis, Universiti Teknologi MARA.

ID25884 Anyi, Richard and Masuil @Alexander, Cendric (1999) Redesigning an institutional building for low-energy using energy-10 software / Richard Anyi and Cendric Masuil @Alexander. [Student Project] (Unpublished)

ID26683 Aleakhber, Zuliah and Jumaat, Mohd. Nizam (1995) Heating and cooling in flutdised bed furnace for heat treatment and industrial applications / Zuliah Aleakhber and Mohd. Nizam Jumaat. [Student Project] (Unpublished)

ID37926 Ab Rahman, Mohamad Yasir (2010) Development of free flow water turbine floating platform for 5kW electric power generator / Mohamad Yasir Ab Rahman. Degree thesis, Universiti Teknologi MARA.

ID39470 Ab Rahman, Mohd Hidayat and Maidin,, Nurul Ain and Ahmad,, Mohd Nazri and Osman,, Mohd Hairizal and Wahid,, Mohammad Khalid and Wahid,, Mohd Fa’iz and Firdaus,, Mohamed Saiful and Mohd Yassim, Halyani and Muhammad Damanhuri, Amir Abdullah and Abd Sukor, Siti Marsyidah (2018) The Comparison Study of Handgrip Pressure on Steering Wheel National Cars / Mohd Hidayat Ab Rahman ...[et al.]. Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 89-105. ISSN 18235514

ID31584 Abd Manan, Norliyana (2009) Development of a nacelle and generator for small horizontal axis wind turbine (HAWTs) / Siti Norliyana Abd Manan. Degree thesis, Universiti Teknologi MARA Shah Alam.

ID31330 Abdull Razak, Razmi (2009) Surface integrity of SKD 61 machined with Electrical Discharge Machining (EDM) using Taguchi method / Razmi Abdull Razak. Degree thesis, Universiti Teknologi MARA Shah Alam.

ID35791 Aminon, Muzafar (2010) Metallographic analysis on low temperature gas nitriding process of AISI 316 stainless steel / Muzafar Aminon. Degree thesis, Universiti Teknologi MARA.

ID32701 Azman, Zainonabidin and Amirul Amin, Ismail (2015) Improving overall thermal transfer value of office tower building in Malaysia, case study : Ministry of Women Family and Community Development, Lot 4G11, Putrajaya / Azman Zainonabidin and Amirul Amin Ismail. In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.


ID27271 Bidi, Cliff (2004) Fire simulation protocol and the role of a CFD software / Cliff Bidi. Masters thesis, Universiti Teknologi MARA.

ID37763 Badrulsham, Muhammad Ikmal Hakim (2020) Development of graphical user interface for milling machine energy prediction tool / Muhammad Ikmal Hakim Badrulsham. [Student Project]

ID16139 Basher, Hazril Sherney and Sheikh Ahmad, Sabarinah and Abdul Rahman, Abdul Malek and Qamaruz Zaman, Nurulhusna (2016) The use of edible vertical greenery system to improve thermal performance in tropical climate / Hazril Sherney Basher … [et al.]. Journal of Mechanical Engineering (JMechE), 13 (1). pp. 58-66. ISSN 1823-5514 ; 2550-164X


ID15778 Deraman@Abd Rahman, Syarifah Noor (2015) Investigation of binaural beats and isochronic tones on beta and gamma brain wave frequencies / Syarifah Noor Deraman@Abd Rahman. Masters thesis, Universiti Teknologi MARA.

ID45524 Dzulkefli, Muhammad Hilmi and Nur Azfahani Ahmad, Nur Azfahani and Mohd Isa, Haryati (2018) Accessing energy efficiency potential in the Malaysian Universities: the literature review / Muhammad Hilmi Dzulkefli, Nur Azfahani Ahmad and Haryati Mohd Isa. In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.


ID36519 Hussim, Mohd Hafiz (2009) System integration and counter-mass balance of fuel cell powered UAV / Mohd Hafiz Hussim. Degree thesis, Universiti Teknologi MARA.


ID40650 Jusoh, M.Z.M. and A.R, Nur Ain and Md Nor, Muhammad Wafi (2020) Computational analysis of fluid flow past a bluff body at low reynolds number in different Apex Angle / M.Z.M. Jusoh, Nur Ain A.R and Muhammad Wafi Md Nor. ESTEEM Academic Journal, 16. pp. 65-74. ISSN 1675-7639


ID3761 Kassim, Mohd Nizan (2005) Performance and techno-economic analysis of monocrystalline, multicrystalline and amorphous silicon-based stand-alone photovoltaic power system in Malaysian field conditions / Mohd Nizan Kassim. Masters thesis, Universiti Teknologi MARA.


ID30902 Luat Gon, Deaby (2009) Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon. Degree thesis, Universiti Teknologi MARA.


ID21304 Mohd Yusof, Hassnol Ishraff (2002) Effect of loading rates on fracture toughness of HDPE / Hassnol Ishraff Mohd Yusof. Degree thesis, Universiti Teknologi MARA.

ID21119 Mahmud, Khan Raqib and M. M., Rhaman and Al Azad, Abul Kalam (2017) Parametric studies and reliability of near-wall turbulence modeling for Large Eddy Simulation of incompressible flows / Khan Raqib Mahmud, M. M. Rhaman and Abul Kalam Al Azad. Journal of Mechanical Engineering (JMechE), 14 (2). pp. 125-147. ISSN 1823-5514 ; 2550-164X

ID21092 Mohammed Salleh, Ahmad Safri (2005) Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Ahmad Safri Mohammed Salleh. Degree thesis, Universiti Teknologi MARA.

ID21114 Mohamed Thaheer, Ahmad Shaqeer and Ismail, Norilmi Amilia (2017) Mission design and analysis of USM high-altitude balloon / Ahmad Shaqeer Mohamed Thaheer and Norilmi Amilia Ismail. Journal of Mechanical Engineering (JMechE), 14 (2). pp. 62-92. ISSN 1823-5514 ; 2550-164X

ID26042 Mahfodz, Mohd Faudzi and Mat Yusof, Yumi Baizurah (1998) Kabinet pengering cili / Mohd Faudzi Mahfodz and Yumi Baizurah Mat Yusof. [Student Project] (Unpublished)

ID31567 Mohamed Ishak, Mohamed Suhaini (2008) Impact studies of kenaf powder composite / Mohamed Suhaini Mohamed Ishak. Degree thesis, Universiti Teknologi MARA Shah Alam.

ID38952 Mohd, Zahiruddin (2006) Effect of sintering temperature on mechanical properties of alumina component / Zahiruddin Mohd. Degree thesis, Universiti Teknologi MARA.

ID37220 Mohd Daud, Mohd Nidzomuddin (2010) Experimental investigation of nanofluids in laminar and turbulent developing flow in a pipe / Mohd Nidzomuddin Mohd Daud. Degree thesis, Universiti Teknologi MARA.

ID36609 Mohd Din, Mohd Hafizi (2010) Analysis of cooling performance for air cooling channels of a PEM fuel cells using CFD / Mohd Hafizi Mohd Din. Degree thesis, Universiti Teknologi MARA.

ID27294 Mohd Suib, Nurul Raihan (2010) Effects of magnetic nanoparticles dysprosium oxide (Dy2O3) addition on electrical properties of (Bi,Pb)-2223 high TC superconductors / Nurul Raihan Mohd Suib. Masters thesis, Universiti Teknologi MARA.

ID35712 Mohd Zaki, Mohd Faisal (2010) The effect of centrifugation at 1000 rpm on crude palm oil characteristics / Mohd Faisal Mohd Zaki. Degree thesis, Universiti Teknologi MARA.


ID23666 Noh, Adriana and Mohammad Nor, Muhammad Amir Syakir and Rosli, Muhammad Arif and Aris, Mohd Aziz (2018) Footstep power generation/ Adriana Noh ...[et al.]. In: Electrical Engineering Innovation Competition & Exhibition (EEICE) 2018, 13-14 November 2018, Dewan Aspirasi, UiTM Cawangan Terengganu.

ID36247 Nasir Khan, Ashraf Khan (2010) Design optimization of a mini hydro generator / Ashraf Khan Nasir Khan. Degree thesis, Universiti Teknologi MARA.


ID38790 Othman, Khairul Ashraff (2009) Design and optimization of hydrogen tank for fuel cell powered UAV aircraft / Khairul Ashraff Othman. Degree thesis, Universiti Teknologi MARA.

ID45254 Othman, Muhamad Fauzi and Abdul Rashid, Mohd Fazli and Awg. Noh, Mohd lukman and Salleh, Mohd Zulkifli (2002) Solar battery / Muhamad Fauzi Othman … [et al.]. Diploma thesis, Universiti Teknologi MARA.


ID32541 Raheimi, Amirulaminnur (2020) Finite element analysis of guided ultrasonic waves in fiberglass composite laminates / Amirulaminnur Raheimi. Masters thesis, Universiti Teknologi MARA.


ID36586 S.N., Ashwindran and A.A., Azizuddin and A.N., Oumer (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design / S.N. Ashwindran... [et al.]. Journal of Mechanical Engineering (JMechE), 17 (3). pp. 55-68. ISSN 1823-5514 ; 2550-164X

ID29548 Siti Jamiah, Tun Jamil and Nur Azfahani, Ahmad and Jasrul Jamian, Jasiman (2018) Connecting Felda communities with solar electrification during flood disaster : the methodology / Siti Jamiah Tun Jamil, Nur Azfahani Ahmad and Jasrul Jamian Jasiman. Malaysian Journal of Sustainable Environment (MySE), 4 (1). pp. 57-76. ISSN 0128-326X

ID43023 Soltani, Ali and Mehraein, Mehrnaz (2012) An analysis of urban features on energy consumption at neighborhood scale / Ali Soltani and Mehrnaz Mehraein. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.


ID25887 Tengku Hanafi, Tengku Mohd Zainudin (1995) Energy efficiency in buildings / Tengku Mohd Zainudin Tengku Hanafi. [Student Project] (Unpublished)


ID40250 Wan Abdullah, Wan Nur Hanani and Hamimi, Asniza and Ismail, Asmat (2019) Systematic literature review (SLR) on the factors affecting distribution of natural lighting inside classrooms / Wan Nur Hanani Wan Abdullah, Asniza Hamimi Abdul Tharim and Asmat Ismail. In: GoGreen 2019 : 2nd International Postgraduate Conference on Global Green Issues, 17 September 2019, Impiana Hotel, Ipoh.

ID16136 Wan Din, Wan Isni Sofiah and Yahya, Saadiah and Taib, Mohd Nasir and Mohd Yassin, Ahmad Ihsan and Razali, Razulaimi (2016) Developing multi-tier network design for effective energy consumption of cluster head selection in WSN / Wan Isni Sofiah Wan Din … [et al.]. Scientific Research Journal, 13 (1). pp. 116-130. ISSN 1675-7009


ID44991 Zainudin, Mahfuzah and Arifin, AsyraR and L. Mahmud, Rahimi and Ismail, Muhammad Hussain (2021) Dimensional analysis and surface characterisation of ground alumina sintered guide pin / Mahfuzah Zainudin ... [et al.]. Scientific Research Journal, 18 (1). pp. 131-142. ISSN 2289-649X

ID40156 Zainun, Ayib Rosdi (2012) Characterization of tmed-copper (I) iodide (Cul) thin film and performance for solid state dye sensitized solar cell applications / Ayib Rosdi Zainun. PhD thesis, Universiti Teknologi MARA.

This list was generated on Tue Jul 27 19:20:04 2021 +08.