Items where Subject is "Lifting and pressing machinery"

Group by: Creators | Item Type
Jump to: A | B | H | I | J | K | M | N | O | P | R | S | W | Y | Z
Number of items at this level: 54.


Smart portable platform / Nor Sajidah Ab Ghani, Nurul Afliana Zainol and Rabiatul Adawiyah Ruzami. (2013) [Student Project] (Submitted)

Shape optimization of cantilever beam / Hamdan Abd Hamid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Thermal survey in autoclave to determine the thermocouple and mould tool position / Farah Aliah Abd Rahman. (2017) [Student Project] (Unpublished)

Photo analyses of a fully submerged static vehicles on different water velocity / Mohamad Adam Muqri Abdul. (2022) [Student Project] (Submitted)

Design and fabrication of portable-foot hydraulic car jack / Abdul Haniff Abdul Rahim. (2022) [Student Project] (Submitted)

Frontier stand / Ariffin Abdul Rashid ...[et al.]. [Student Project]

The effect of difference types of muffler on NA engine through experimental-flow / Mohd Fazli Abdul Rashid. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Design, analysis and fabrication of wheel dolly jack / Muhammad Haiqal Danish Ahmad. (2022) [Student Project] (Unpublished)

Compact hydraulic press load lifter / Nurul Ain Ahmad Shahril ... [et al.]. (2019) [Entrepreneurship Project]

Ezy can crusher / Muhammad Na’im Zulfaqar Asmadi Ahmad ...[et al]. [Student Project]

Oil palm fruit lifter / Aizul Rezza Azmi. (2022) [Student Project] (Unpublished)

Crank wheel metal crusher/ Muhammad Afif Haziq Azmi ... [et al.]. [Student Project] (Unpublished)


The effect of centrifugation at 5000 rpm on crude palm oil characteristics / Nasrul Syamin Burhanordin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.


Mini moveable grocery basket / Muhammad Irfan Aiman Hanapiah. (2022) [Student Project] (Unpublished)

Portable lifting machine for the elderly / Shahrul Shafiz Haridan, Mohd Rezal Abdul Mutahar and Qhairul Adzhar Johari. (2015) [Student Project] (Submitted)

Climbing spinning cart / Muhammad Syamin Haiman Harun. (2022) [Student Project] (Unpublished)

Expert system for mould base / Mohd Husmadi Husain, Mohd Masri Mohd Mustaffa and Nurliza Md Desa. (1997) [Student Project] (Unpublished)

Trash can compactor / Muhammad Harith Iqbal Husainee. (2022) [Student Project] (Unpublished)

Design and development of rocket based rubber hollow elastic ball launcher / Syahmie Arif Farhan Husariman. (2022) [Student Project] (Submitted)


Press shop die handling investigation through simulation / Azianti Ismail. (2009) [Research Reports] (Unpublished)

Investigation on types of casting defects due to insufficient mould hardness in green sand casting / Ibrahim Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Stairs-2-elevator / Muhammad Hisyam Ismet Furmansyah ...[et al.]. [Student Project]

Design, analysis and fabrication of can crusher / Muhammad Danish Izrin Kheirany. (2022) [Student Project] (Unpublished)

A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. (2003) [Student Project] (Unpublished)


Development and improvement of the car seat polyurethane injection moulding process / Ahmed Jaffar and Jamaluddin Mahmud. (2006) [Research Reports] (Unpublished)

Effect of pre-seted residual stress on the spur gear / Alfonso Muze Jerol. (2003) Degree thesis, thesis, Universiti Teknologi MARA.


The can disposal machine / Mohd. Rizal Khairudin and Shafee Pandi. (1998) [Student Project] (Unpublished)


Designing the manufacturing process of window clamp using CNC machine / Khairulnizam Mansor and Mohd. Burhanuddin Ishak. (2002) [Student Project] (Unpublished)

Automobile brake pad friction and wear test rig: Fabrication / Ismail Mesror. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Comparative study of drag and lift force for different shapes of hydrofoils / Ainul Iffat Mohamad Rosdi. (2022) [Student Project] (Unpublished)

Development idea of smart forklift / Nur Athirah binti Mohamad Sakri and Muhammad Naim bin Mahyuddin. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Mission design and analysis of USM high-altitude balloon / Ahmad Shaqeer Mohamed Thaheer and Norilmi Amilia Ismail. (2017) Journal of Mechanical Engineering (JMechE), 14 (2). pp. 62-92. ISSN 1823-5514 ; 2550-164X

Multi-purpose portable pulley / Muhammad Arif Akmal Mohd Alias ...[et al.]. [Student Project]

Comparative study of drag and lift force for different shapes of submarines / Muhammad ‘Ammar Aiman Mohd Alif. (2022) [Student Project] (Unpublished)

Human less arm with bluetooth module / Abdul Mujib Mohd Muhayeddin and Muhammad Qayyum Zabidi. (2019) [Student Project] (Submitted)


Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)


Electronic pot lifter / Muhamad Hishamuddin Omar, Muhammad Nurafiq Mohd Khir and Jamri Muhamad. (2013) [Student Project] (Submitted)


Weight lifting stopper / Emilson Petrus Felix ... [et al.]. [Student Project] (Unpublished)


Automated portable hammer / Muhammad Irfan Hakimi Ramli ...[et al.]. [Student Project]

Blueprint: Zauber presser / Anis Suhaila Razman, Mardhiah Mat Din … [et al.]. (2018) [Entrepreneurship Project] (Submitted)

Design and development of rocket based cotton ball launcher / Megat Muhammad Asyraf Rosli. (2022) [Student Project] (Submitted)

Research on forklift system / Mohd Khairul Adha Rosli and Mohd. Fairuz Farhan Jamaluddin. (2002) [Student Project] (Unpublished)


Development and characterization of oil palm empty fruit bunch fibre reinforced polylactic acid filaments for fused deposition modelling / Vignesh Sekar, Mazin Zarrouq and Satesh Narayana Namasivayam. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 89-107. ISSN (eISSN): 2550-164X

Mechians / Mohd Tawab Shafie ... [et al.]. (2015) [Student Project] (Unpublished)

Design and development of catapult based ping pong ball launcher / Ammar Imran Shamsuddin. (2022) [Student Project] (Submitted)

Lift controller using PIC / Mohd Shamsul Shamsuddin and Mohd Azimi Mohd Sidek. (2005) [Student Project] (Unpublished)

Multi-scale modelling for failure analysis of various composite laminates under biaxial loading / Ahmed Abbas Shnawa. (2021) Masters thesis, thesis, Universiti Teknologi MARA.


Jig and fixtures for press machine / Wan Ahmad Faris Wan Mohd Kamaluddin. (2022) [Student Project] (Submitted)

Synthetic and Natural Fibrous Scaffolds for Soft Tissue Engineering Applications / Weily Khoo ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 223-233. ISSN 18235514


The efficiency of the cabin (spray color) / Mohd Fazrydeen Yahya and Muhammad Syakir Kamarulzaman. [Entrepreneurship Project] (Unpublished)

Univariate forecasting model on demand of forklift at PBKSB and Box-Jenkins Methodology / Ainaliana Ying. (2015) Industrial Training. Bachelor of Science (Hons.) Statistics, Kota Bharu. (Unpublished)

Tensile impact test / Ahmad Syahrin Yusof. (2002) Degree thesis, thesis, Universiti Teknologi MARA.


Studies the effect of injection pressure with porosity level and hardness in hot chamber die Casting process / Mohd Hafiz Zainuddin, Fadhlul Wafi Keya Nordin. (2005) [Student Project] (Unpublished)

Industrial line follower for supplying materials / Aiman Uzair Zuedirmman and Muhammad Syarifudin Mohamad Sabri. (2019) [Student Project] (Submitted)

This list was generated on Tue May 30 00:36:10 2023 UTC.