Items where Subject is "Mechanics applied to machinery. Dynamics"

Library of Congress Subject Areas (1)
- T Technology (1)
  - TJ Mechanical engineering and machinery (4)
    - Mechanics applied to machinery. Dynamics (246)

Group by: Creators | Item Type

Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z

Number of items at this level: 246.

A

Performance Evaluation of Dynamic Absorbers Based on Randy Fox and Dunkerley Methods / Syafirah A. Samat ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 263-279. ISSN 18235514

Development of free flow water turbine floating platform for 5kW electric power generator / Mohamad Yasir Ab Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Development of a gearing mechanism for a robotic finger / Hamzah Ab Wahab. (2011) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

New millennium Annulus Engine Mechanism / Azmi Ab. Rahman, Hairulanam Mat Swadi and Halek Halimoon. (2003) [Student Project] Physical copy is available on shelf (Unpublished)

Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

A new design of automatic hanging system / Mohd fIkri Abd Halim. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Study of metal detection system performance using inductive proximity sensor / Nurul Atikah Abd Halim. (2020) [Student Project] Physical copy is available on shelf

To study the effects of heat treatment on the mechanical properties of weapon barrel / Shukor Abd Jalil and Rohaizad Jamaludin. (2003) [Student Project] (Unpublished)

Performance analysis of thermal arc spray aluminium coating as a sacrificial anode / Muhamad Hafiz Abd Malek. (2015) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Development of a nacelle and generator for small horizontal axis wind turbine (HAWTs) / Siti Norliyana Abd Manan. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Resistance of flow over submerge pillar of different surface roughness - an experiment / Ahmad Haiqal Abd Rahman. (2022) [Student Project] (Unpublished)

Computer simulation and turbine development for free flowing water generator / Mohd Ridhwan Hizami Abd Rashid. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Parameter Magnitude-Based Information Criterion in Identification of Discrete-Time Dynamic System / Md Fahmi Abd Samad and Abdul Rahman Mohd Nasir. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 119-128. ISSN 18235514

Effect of loading rates to the fracture toughness on carbon manganese steel ASTM 516 grade 70 / Abdullah Abd. Ghani and Mohd Fadhir Abd. Rahman. (1996) [Student Project] (Unpublished)

Photo analyses of a fully submerged static vehicles on different water velocity / Mohamad Adam Muqri Abdul. (2022) [Student Project] (Submitted)

Whitworth quick-return mechanism analysis / Ahmad Farizal Abdul Ghafar and Abu Sofian Abu Hassan. (1992) [Student Project] Physical copy is available on shelf (Unpublished)

Process study on composite products / Mohd Shah Rizan Abdul Hafiz & Widia Wahid. (2003) [Student Project] (Unpublished)

Study on tower crane / Nurul Hayati Abdul Halim … [et al.]. (2003) Diploma thesis, thesis, Universiti Teknologi Mara.

Development of composite panels for short span bridge construction using indigenous agro - based resources: Fabrication and mechanical testing / Ahmad Hussein Abdul Hamid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

TiH₂ microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. (2017) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Effect of heat treatment on phase transformation of niti shape memory alloy produced by metal injection moulding / Ros Atikah Abdul Kadir, NurAtira Sharir and Muhammad Hussain Ismail. (2021) Scientific Research Journal, 18 (1). pp. 73-84. ISSN 2289-649X

Degradation and wear analysis of automatic transmission fluid (ATF) of 1.3l automatic transmission (AT) vehicle / Syazuan Abdul Latip. (2014) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Post impact fatigue of fibre metal laminate (FML) / Abdul Adzim Abdul Mubin. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Development of clean-up tagging system for children / Syadiyatul Qistina Abdul Mutalib. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Computational mechanics analysis in elevated shell platform structures / Azizah Abdul Nassir, Yee Hooi Min and Syahrul Fithry Senin. (2021) Journal of Mechanical Engineering, 18 (3): 15. pp. 247-259. ISSN 2550-164X

Design and fabrication of portable-foot hydraulic car jack / Abdul Haniff Abdul Rahim. (2022) [Student Project] (Submitted)

Effect of layer thickness on repeatability of 3D printed PLA produced using 3D Espresso F220 / Mohd Ikmal Hisham Abdul Rahim. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Transfer matrix method for identifying the dynamic characteristics of an exhaust system / Muhamad Norhisham Abdul Rani. (2008) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Design, analysis and fabrication of full-body sanitizing machine / Abdul Rashid Nasir. (2022) [Student Project] Physical copy is available on shelf (Unpublished)

Posture Detection on Active and Inactive Vertebrae of Spine Biomechanics in Critical Daily Activities / Wan Aliff Abdul Saad...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 49-74. ISSN 18235514

Performance of floating semi rigid pulverized fly ash stone column / Nazaruddin Abdul Taha. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 14 (14). Institute of Graduate Studies, UiTM, Shah Alam.

Effect of fibre weight fraction on the flexural and dynamic mechanical properties of arenga pinnata fibre and its hybrid composites / Abdul Hakim Abdullah ... [et al.]. (2021) Scientific Research Journal, 18 (1). pp. 197-208. ISSN 2289-649X

The effects of 0.16 % Chromium + 1.32 % Nickel addition on austempered ductile Iron for mechanical properties and slurry erosion / Bulan Abdullah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 108-120. ISSN Journal of Mechanical Engineering (JMechE)

Simulation of production capacity using basic language / Faizul Azlan Abdullah. (1991) [Student Project] Physical copy is available on shelf (Unpublished)

Experimental and analysis of vehicle dynamics performance based on driving behavior / Mohd Azman Abdullah... [et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 193-206. ISSN 1823-5514 ; 2550-164X

PZT MMIC via hole fabrication technique / Raudah Abu Bakar. (2010) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Simplified closed-form method to large deflection stability analysis of thin rectangular plate / E. I. Adah and O. M. Ibearugbulem. (2022) Journal of Mechanical Engineering (JMechE), 19 (1): 21. pp. 251-271. ISSN (eISSN): 2550-164X

Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. (2022) [Student Project] (Submitted)

Optimization of snap fit features design for rapid prototyping fabrication / Mohd Amiruddin Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The Study of Corrosion Behaviour of Cobalt-Iron (CoFe) Alloy Coating / Nor Fazli Adull Manan ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 167-183. ISSN 18235514

The implementation of low cost mineral silica in underfill system / Farrah Noor Ahmad and Ghazirah Mustapha @ Mustafa. (2010) [Research Reports] Physical copy is available on shelf (Unpublished)

Development of an automatic alignment conveyor system: conveyor design / Lukman Hakim Ahmad. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Effects of material and infill density towards adjustable headrest orthosis development based on 3D printing technology / Madya Mastika Ahmad. (2020) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Hazardous area classification for wheat flour processing plant / Mohd Aizad Ahmad, Muhammad Naqib Saifullah Noor Azman and Zulkifli Abdul Rashid. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 12. pp. 172-183. ISSN (e-ISSN): 2682-8588

Powder Mixed Dielectric in Electrical Discharge Machining of Inconel 718 / Said Ahmad...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 110-127. ISSN 18235514

Response of dynamic wave for stress impact on semi-SWATH / Ammar Asyraf Ahmad Azam. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The investigation of the dynamic behaviour of a complex structure using the wave-based substructuring method / Ahmad Burhani Ahmad Basri. (2009) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Wave-Based Substructuring Method for Dynamic Behaviour Investigation of Solid Meshing Based Finite Element Model of a Structure / Ahmad Burhani Ahmad Basri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 176-186. ISSN Special Issue Advances in Engineering and Technology Vol 5 (Submitted)

Potable moving ladder / Muhammad Fahmi Ahmad Faizal ... [et al.]. [Student Project] (Unpublished)

Effect of NACA 0010 airfoil car spoiler towards downforce and drag force / Muhammad Azraai Ahmad Fisal. (2013) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is downloadable on MyKM Portal

Effect of NACA 0010 airfoil car spoiler towards downforce and drag force: article / Muhammad Azraai Ahmad Fisal. (2013) pp. 1-6.

Effect of sodium silicate on the dimensional stability and mechanical behaviour of non-woven flax reinforced acrylic based polyester composites / Mohd Fadli Ahmad Rasyid... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 233-245. ISSN 18235514

Solidworks design and simulation of staircase climbing trolley / Najian Ahmad Shah. (2022) [Student Project] (Submitted)

The effect of environment on automotive materials / Azizah Hj Ali Sibramulisi. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Surface integrity of material machined using Electrical Discharge Machining (EDM) with and without vibration / Aniza Alias. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The effects of niobium addition on mechanical and physical properties of austempered ductile iron / Siti Khadijah Alias. (2010) Masters thesis, thesis, Universiti Teknologi MARA.

Lengan robot numatik / Zulkipli Alias and Dharma Osman. (1986) [Student Project] Physical copy is available on shelf (Unpublished)

A Model for Hypersensitive Airflow Sensor Concept / Mohamad Dzulhelmy Amari ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 163-174. ISSN 18235514

Heat transfer analysis of different cooling medium on a condenser of refrigeration system / Amira Natasha Amir Rizal. (2022) [Student Project] (Unpublished)

Study on surface integrity of tungsten carbide macidned by die-sinking EDM using Taguchi method / Amizan Amran. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

The design of bench grinding machine using hard disk / Nur Iffah Qharina Amri. (2022) [Student Project] (Submitted)

Effects of joint designs on fracture toughness of the butt welds aluminium alloy 5052 / Dahia Andud. (2012) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Experimental Analysis to Evaluate the Effect of Dynamic Absorber / M. Azhan Anuar...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 242-262. ISSN 18235514

Classification of transient disturbance using Wavelet based support vector machine / Fahteem Hamamy Anuwar. (2012) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

CFD and wind tunnel testing for a rear car spoiler / Ahmad Azlan Asri. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam. Physical copy is available on shelf

Crush Response of Stacked Square Toroidal Tubes with A Central Tube / Naziratie Assrinie Assan ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 1-14. ISSN 18235514

Design and fabrication of orange and apple cutter machine / Asaf Zubair Awin Zubir. (2022) [Student Project] (Unpublished)

Level control of process control / Anwar Zharif Azhar. (2022) [Student Project] (Unpublished)

A case study: Plan-Do-Check- Act (PDCA) cycle to reduce defects in manufacturing process of injection moulding in plastic parts / Nur Farahim Aziz. (2022) [Student Project] (Submitted)

Study of windblast interface element with Postura MotergoTM test rig / Shahrool Azree Azlan. (2015) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Particulate matter concentration level inside air conditioned public bus in klang valley / Mohd Luqman Hakimi Azmi. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Design and fabricate a temperature sensor on aluminium using tilting furnace / Muhammad Fikhran Hamsyi Azmi. (2022) [Student Project] (Unpublished)

Pressure drop analysis in a pin type mini channel / Nurul Izzati Azmi … [et al.]. (2021) Journal of Mechanical Engineering, 18 (3): 16. pp. 261-270. ISSN 1823-5514

Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

B

Production design of GRP Payang potong belakang / Amirul Hakim Baharizam. (2022) [Student Project] (Unpublished)

Aggregate production planning with outsourcing for wind turbine manufacturing process / Indera Shaiful Baharudin. (2012) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Thermal behaviour of brake pad light rail transit / Mohd Zaki Bahrom. (2009) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The effectiveness of exhaust fan in removing CO and C0₂ in some selected classroom in Faculty of Applied Science, UiTM Shah Alam / Norazreen Bakry. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The study on factors affecting corrosion resistance of stainless steel / Alyani Basharuddin. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Determination of mechanical and chemical properties of brake pads for Light Rail Transit applications / Mohamad Nor Berhan and Darius Gnanaraj Solomon. (2007) [Research Reports] (Unpublished)

Optimization of cutting parameter for the drilling of medium density fiberboard / Muhammad Azhanudin Borhan. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

C

An Artificial Intelligent Approach Using Fuzzy Logic for Sleep Quality Measurement / C.K. Ang...[et al.]. (2017) Special Issue Engineering for Humanity Vol 2, SI 4 (2). pp. 31-47. ISSN 18235514

Computational fluid dynamics simulation using model from building information modeling software / Muhammad Khalid Che Abd Aziz. (2021) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Perisian ujikaji termodinamik / Mohd. Ashri Che Jaafar and Joseph Kellah. (1989) [Student Project] Physical copy is available on shelf (Unpublished)

Propulsion system design of GRP payang potong belakang / Ahmad Ikmal Haziq Che Mohamad Noor. (2022) [Student Project] (Unpublished)

D

Merekabentuk alat pengangkat bagi mesin Instron / Zulkifli Dahlan. (1992) [Student Project] Physical copy is available on shelf (Unpublished)

F

Design and fabrication of sliding platform component of Smart Parcel Drop Box (SPD) / Muhammad Nufaiel Aiman Faiza. (2022) [Student Project] (Unpublished)

Slice Co : Multi Meat Slicer / Edzzry Indrawan Faizal Edzuan ...[et al.]. (2016) [Entrepreneurship Project] (Unpublished)

PV system based Dynamic Voltage Restorer (DVR) in water pumping system for agricultural application / Awais Farooqi … [et al.]. (2021) Journal of Mechanical Engineering, 18 (3): 10. pp. 163-180. ISSN 2550 - 164X

G

Structural analysis simulation of a component in automotive engineering / Ahmad Arif Aiman Shah Ghazali. (2022) [Student Project] (Unpublished)

H

Fire simulation of a scaled Mass Rapid Transit (MRT) tunnel / Razieh Khaksari Haddad ... (et al.). (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 1-17. ISSN 18235514

The design of a high aspect ratio HALE aircraft composite wing. part I: static strength analysis / Bambang K. Hadi, Muhammad A. Ghofur and IndraPermana. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 2-11. ISSN 1823-5514 ; 2550-164X

Development of combination cooling method for solar-powered device / Mohammad Iskandar Harith Halimirizal. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Physical Properties of Porcelain Ceramic with Influence of Milled Alkali Resistant (AR) Fibreglass for Sewer Pipes Application / Muhammad Ikhmal Hanapi...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 1-9. ISSN 18235514

Polypropylene fibre reinforced laterite bricks / Hafez Haron. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Sit-to-stand movements using PID controller / Mohd Al-Hafiz Harun. (2008) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Development and kinematic analysis of catapult based on different ball weight parameter / Ikhwan Hasfizal. (2022) [Student Project] (Submitted)

Porosity effects of AlSi 10mg parts produced by selective laser melting / Noreriyanti Hasmuni ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 246-255. ISSN 18235514

Study on drilling parameters using high speed steel (HSS) and cobalt tools cutter / Fadhirul Azreen Hishamuddin. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Development of a quantitative evaluation method in occupational therapy exercise for upper limb motor function rehabilitation / Hokyoo Lee ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 258-274. ISSN 18235514

Trash can compactor / Muhammad Harith Iqbal Husainee. (2022) [Student Project] (Unpublished)

Design and development of rocket based rubber hollow elastic ball launcher / Syahmie Arif Farhan Husariman. (2022) [Student Project] (Submitted)

Simulation of chiller water storage / Hafiz Zaim Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

I

Impact performance of glass fibre/epoxy composite material / Fahizi Ibrahim. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Programming of control system for self-balancing scooter / Muhamad Yusuf Ibrahim. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam. Physical copy is available on shelf

Computational Fluids Dynamics (CFD) analysis of UiTM Blended Wing Body (BWB) Baseline-II UAV Model without Canard at Similar Reynolds and Mach Numbers with Wind Tunnel Test / Mohd Hafizi Idris. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Merekabentuk dan fabrikasi klip gauge untuk ujian dinamik dan keretakan / Norhisham Idris. (1996) [Student Project] (Unpublished)

Numerical modelling on the effect of number of curvature to the velocity profile in asymmetric curve channel / Adam Ishak. (2020) [Student Project] Physical copy is available on shelf

Water pump using solar energy to be used in rural areas / Shukri Ishak and Amiruddin Mohd. (1985) [Student Project] Physical copy is available on shelf (Unpublished)

A study on the mixing process in the paint industries development of a drum barrel jig / Mohd Izat Ismail. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Photo analysis of a fully submerged static vehicle in a flowing water / Nor Ismanadia Ismail. (2022) [Student Project] (Submitted)

A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. (2003) [Student Project] (Unpublished)

J

Development of experimental setup and procedure for axial impact test of Fiber Metal Laminate (FML) plate / Kamilia Jamaludin. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Simulation of Quick Gear Shifter (QGS) system on a single-seated open wheel vehicle using Matlab (Simulink) \ Muhamad Haziq Jamaludin. (2017) [Student Project] Physical copy is available on shelf (Unpublished)

Wave effect on bulk carrier structure / Mohammad Arif Jawahir. (2006) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Rheological behaviors and mechanical properties of kenaf-polypropylene composites / Amirul Hafiz Johari. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Application of IMC-PID Controller with integer-order filter and fractional-order filter for steam distillation essential oil extraction process / Siti Nur Hasinah Johari, Ramli Adnan and Mazidah Tajjudin. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 17. pp. 1-7. ISSN 1985-5389

Elastic study of quench and composite europium barium copper oxide (EuBa2Cu3O7-δ(Eul23)) superconductor / Siti Noorzuraidah Jusoh. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

K

Development and kinematic analysis of quick return mechanism (with crank wheel) / Ahmad Fathi Muhaimin K Asmadi. (2022) [Student Project] (Unpublished)

Electro-strip / Muhammad Syakir Kamarul Zaman and Mohd Fazrydeen Yahya. (2017) [Entrepreneurship Project] (Unpublished)

Social Media Sentiment Analysis of Thermal Engineering Students for Continuous Quality Improvement in Engineering Education / Wandeep Kaur ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 263-272. ISSN 18235514

Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Khairul Bahrein Khalid. (2005) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Experimental investigation on performance of Campro engine when modify exhaust gas extractor / Mohd Mustaffa Hafiz Khalil. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

L

Double U Enterprise: portable vibratory tumbler / Nor Atira Latif Pudin, Muhamad Zuhdi Mohd Yusoff, Muhamad Firdaus Zulkafli, Muhamad Nor Haziq Hasmuni. (2017) [Entrepreneurship Project] (Unpublished)

M

Primary design air compressor for force induction engine to be replace turbocharger or supercharger system / Ahmad Fathan M Saleh @ Mohd Nawi. (2006) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The Effect of Surface Texture on the Joint Shear Strength of AR500 Steel and AA7075 / M. N. Muhamed...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 289-301. ISSN 18235514

Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis / Hanafi.M.Yusop ...[et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 103-122. ISSN 18235514

The Effect of Annealing Temperature on Spin-Coated Zn-doped NiO film for humidity sensing applications / N.F.Q. Fahmi … [et al.]. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 16. pp. 100-105. ISSN 1985-5389

Post impact fatigue of kenaf powder, PP, MAPP laminated with kevlar hybrid composites / Siti Norain Manan. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Effects of Temperature Changes, Air Velocities and Volume Fractions on the Single Droplet Evaporation Behaviors at High Ambient Temperatures / W. Manosroi. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 1-19. ISSN 18235514

Design and fabricate the cleaning cum cooling system for downdraft gasifier / Muhammad Asyraf Mansor. (2017) [Student Project] Physical copy is available on shelf (Submitted)

Hysteresis Modelling of Pneumatic Artificial Muscle using General Cubic Equation and Factor Theorem Prediction Method / Mohd Azuwan Mat Dzahir...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 1-21. ISSN 18235514

Synthesis and characterization of biomorphic silicon carbide from wood powders precursors / Husna Md Elias. (2017) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

PIC microcontroller based temperature measuring system using thermocouple sensor / Ahmad Yasir Md Zain. (2008) [Student Project] Physical copy is available on shelf (Unpublished)

A study of effect to the water pumping system powered by pv solar by removing the battery storage / Ahmad Izzat Mod Arifin ... [et al.]. (2020) [Research Reports] (Unpublished)

Conceptual design of human powered hydrofoil / Khairol Izwan Mohamad. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

V-shaped bending support’ membantu dalam eksperimen ‘3-point bending test’ untuk tikus bersaiz kecil (V-shaped bending support helps in 3-point bending test experiment for small mice bone) / Noor Shafini Mohamad and Mohd Hafizi Mahmud. (2020) Jurnal Inovasi Malaysia (JURIM), 4 (1). pp. 1-14. ISSN 2600-7606

Tensile and impact properties of hybrid composites from textile waste / Amir Hafizin Mohamad Azminor, Nurul Syafiqah Zabidi and Bibi Intan Suraya Murat. (2021) Scientific Research Journal, 18 (1). pp. 119-130. ISSN 2289-649X

Comparative study of drag and lift force for different shapes of hydrofoils / Ainul Iffat Mohamad Rosdi. (2022) [Student Project] (Unpublished)

Hydrodynamics studies of low temperature model of fluidized bed / Marliana Mohamed. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Preparation of Siam Weed extracts / Nor Shamsiah Mohamed and Koh Ching Theng. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 268-274. ISSN 18235514

Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 189-204. ISSN 18235514

Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Frequency response and transient analysis of a component in motor vehicle / Afiq Zharfan Mohammad Zulhaffiz. (2022) [Student Project] (Submitted)

The effect of dual fuel producer gases with Y-shaped mixing chamber on single cylinder spark ignition engine operation / Mohd Mahadzir Mohammud@Mahmood... [et al.]. (2023) ESTEEM Academic Journal, 19. pp. 99-108. ISSN 2289-4934

Effect of different dielectrics and work piece vibration on electrical discharge machining (EDM) / Norliana Mohd Abbas. (2008) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Pressure control process / Muhammad Azzahan Daniel Mohd Adli. (2022) [Student Project] (Unpublished)

Development and kinematic analysis of crank slider mechanism (with crank wheel) / Aidil Ashraf Mohd Adnan. (2022) [Student Project] (Unpublished)

Evaluation on torsion test method for composite materials / Muhamad Zulhilmi Mohd Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Mechanical and physical properties of aluminium vs steel / Amni Wafiqah Mohd Arhafudin. (2021) [Student Project] (Submitted)

Design and fabrication of moveable storage toolbox / Muhammad Azim Najmi Mohd Asri. (2022) [Student Project] (Unpublished)

Failure mode and effects analysis in manufacturing of milling process / Mohd Aslam Mohd Azaha. (2022) [Student Project] (Unpublished)

Experimental investigation of nanofluids in laminar and turbulent developing flow in a pipe / Mohd Nidzomuddin Mohd Daud. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Effect of nozzle diameter and volume cavity at various distances for electronic cooling / Muhammad Hafiz Mohd Din. (2017) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal. (2022) [Student Project] (Unpublished)

Automatic potato peeler / Muhammad Thaqif Muqri Mohd Fekeri. (2022) [Student Project] (Unpublished)

Prediction of material removal rate and tool wear rate in electrical discharge machining using feedforward neural network / Zaid Mohd Hanapiah. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Mini conveyor belt using geneva mechanism / Muhammad Hariz Luqman Mohd Huszeine. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Mini conveyor belt using geneva mechanism / Muhammad Hariz Luqman Mohd Huszeine and Suhadiyana Hanapi. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

Process optimization to reduce draw stage for an automotive stamped part / Muhammad Faisal Mohd Latafi. (2011) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The length scale effect between wall and closes field point on a single turbine blade simulation / Mohd Hafiz Mohd Noh ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 155-166. ISSN 18235514

Water vacuum cleaner / Ahmad Izzuddin Mohd Razali. (2022) [Student Project] (Unpublished)

Numerical analysis on the effect of built form in urban ventilation assessment / Mohd Azhari Mohd Rodzi. (2016) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Design and fabrication of stair climbing trolley / Aziz Iskandar Mohd Shafawi. (2022) [Student Project] Digital copy is downloadable on MyKM Portal (Unpublished)

Automatic flour sifter / Alya Husna Mohd Shukry. (2022) [Student Project] (Unpublished)

Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Casing of magnetic flashlight / Muhammad Isyraf Mohd Zainudin. (2022) [Student Project] (Unpublished)

Modal And FRF Based Updating Methods For The Investigation Of The Dynamic Behaviour Of A Plate / Mohd Syazwan Mohd Zin ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 175-189. ISSN 18235514

Katil istimewa / Mohd Zolkarnaine Jonet, Kamarudin Mohamad Nor and Zuliana Ismail. (1995) [Student Project] Physical copy is available on shelf (Unpublished)

Gas treatment (air scrubber) / Mohamad Fadli Mohd. Yusoff, Muhd. Syarif Khalid and Rosita Baslan. (1996) [Student Project] Physical copy is available on shelf (Unpublished)

The acceptance of Computerized Maintenance Management System (CMMS) implementation in building Facilities Management (FM): a case study / Syamsyeer Moohammad Musa. (2016) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Mini plastic injection moulding / Muhammad Arsyad Nashrol Azam. (2022) [Student Project] Physical copy is available on shelf (Unpublished)

The effect of slurry erosion wear on boronized alloyed ductile iron (0.019 % Niobium and 0.145 % Vanadium) / Khalissah Muhammad Yusof ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 121-130. ISSN 18235514

Experimental study of laminar and turbulent flow / Mohd. Effandy Mukhtar, Muhamad Nor Taufik Sahani and Shahirrunizan Majuan. (2002) [Student Project] (Unpublished)

The investigation of mechanical properties of PVC/PEMA polymer blends using Dynamic Mechanical Thermal Analysis (DMTA) / Nur Zahidatul Fathinah Mukhtar. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

N

Design and fabrication of solar water heater / Muhamad Salahuddin Nasarudin. (2022) [Student Project] (Unpublished)

Preparation and characterization of epoxidized-30% poly (methyl methacrylate)-grafted natural rubber polymer electrolytes for electrochemical double layer supercapacitor / Khuzaimah Nazir. (2018) In: The Doctoral Research Abstracts. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Design and fabrication of waste food shredder compost maker machine / Nik Azim Akmal Nik Azizul. (2022) [Student Project] (Submitted)

The influence of thickness on mild steel in rapid cooling process / Nik Iqlima Nik Mohd Zaki. (2022) [Student Project] (Submitted)

Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)

Design and analysis of sliding wear mechnism in electric train application / Mohd Akmal Affiq Noor Shamshidi. (2017) [Student Project] (Unpublished)

Effect of different water flowrates and air velocity on a cooling tower / Muhammad Amirul Norman. (2022) [Student Project] (Unpublished)

Reverse engineering: a conceptual study of fatigue failure for gear application / Mohd Amin Nurdin. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is available in CD Physical copy is available on shelf

Experimental Validation of Vehicle Dynamic Characteristics of a Virtual Heavy Vehicle Model / I. Nurzaki ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 131-143. ISSN 18235514

O

Finite element modelling and updating for the dynamic behaviour of a structure with bolted joints / Rohaizat Omar. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is downloadable on MyKM Portal

Study on the hydrogen storage properties of NaAlH4 composites using taguchi method / Zarina Omar. (2021) [Student Project] (Unpublished)

Fabrication and analysis of three dimensional space truss structure / Mohd. Zahir Osman and Saiful Anuar Ahmad Salleh. (2002) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Development and kinematic analysis of quick return mechanism (without crank wheel) / Adams Haiqal Osman Nazir. (2022) [Student Project] (Submitted)

Fracture toughness of polymer-mixed concrete / Muhamad Shah Osmin and Mohd Harif Mat Yusuf. (2004) [Student Project] Physical copy is available on shelf (Unpublished)

Design and fabrication of electric skateboard with front light / Mohamad Afif Jazimin Othman. (2022) [Student Project] (Submitted)

P

Numerical simulation and experimental verification on distortions induced by wire-arc additive manufacturing components and costing analysis / Keval Priapratama Prajadhiana. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

R

Finite element analysis of guided ultrasonic waves in fiberglass composite laminates / Amirulaminnur Raheimi. (2020) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Preparation of Cu-Zn based catalysts via ultrasonic spray precipitation method for methanol synthesis / Muhammad Zahiruddin Ramli. (2019) PhD thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Stress analysis of riveted and bonded patch repairs on a stiffened panel / Ramzyzan Ramly. (2005) Masters thesis, thesis, Universiti Teknologi MARA.

Post processor modification and machine simulation in 5-axis machining using Fusion 360 CAM / Muhamad Syaimanfathi Razae. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Design of a thermoacoustic device / Fazlina Rejab. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Non-radial fiber turbine performance for low pressure turbine via Cfd and experimental (cold flow) / Siti Nor Syazwani Ridzuan. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Performances of fuel injection system in diesel engine using distributor type fuel injection pump / Mohd Nizan Rifai, Shahidan Sudin and Mohamad Sukri Ismail. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. (2022) [Student Project] (Unpublished)

S

Preparation and Characterization of pH- and Temperature-responsive by Different Composition Chitosan-P(MAA-co-NIPAM) Hydrogel for Drug Delivery System / S. Z. M. Rasib ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 123-133. ISSN 18235514

A 3kW water-cooled Proton Electrolyte Membrane Fuel Cell (PEMFC) thermal performance analysis / Shahir Sabtu. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Heat transfer analysis of different cooling medium on a condenser / Muhammad Faris Saiful Anuar. (2022) [Student Project] (Unpublished)

Hydraulic axle shaft puller with stand / Muhammad Luqman Hakim Salyazid. (2022) [Student Project] (Unpublished)

Design, analysis, and fabrication of mechanical rice washing machine / Schufee Amani Suhaime. (2022) [Student Project] Physical copy is available on shelf (Unpublished)

Development and characterization of oil palm empty fruit bunch fibre reinforced polylactic acid filaments for fused deposition modelling / Vignesh Sekar, Mazin Zarrouq and Satesh Narayana Namasivayam. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 89-107. ISSN (eISSN): 2550-164X

Design and Analysis of Centrifugal Pump Impeller for Performance Enhancement / Farah Elida Selamat ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 36-53. ISSN 18235514

Design and development of catapult based ping pong ball launcher / Ammar Imran Shamsuddin. (2022) [Student Project] (Submitted)

Lift controller using PIC / Mohd Shamsul Shamsuddin and Mohd Azimi Mohd Sidek. (2005) [Student Project] (Unpublished)

Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers / Shing Chee Lim ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 246-254. ISSN 18235514

Sound Absorption Coefficient of Coir Fibre with Poly-Lactic Acid (PLA) / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 166-175. ISSN 18235514

Software development for sprinkler calculation / Julina Sisey. (2003) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. (2022) [Student Project] (Unpublished)

Development of prediction system model for mechanical property in friction stir welding using Support Vector Machine (SVM) / Arman Syah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 216-225. ISSN 18235514

Manual spikey roller coconut husk peeler / Sharifah Nur Alieya Syed Fakhrul Anwar. (2022) [Student Project] (Submitted)

Computational analysis of thruster nozzle / Syed Daniel Shukri Syed Mohd Tahir. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

T

Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 23-35. ISSN 18235514

Development of an automatic clothes hanger using Arduino Uno microcontroller / Tuan Syimir Hazim Tuan Mohd Shamsuddin, Alif Irsyaruddin Zulkifli and Muhammad Afiq Hasan Azhari. (2015) [Student Project] Physical copy is available on shelf (Submitted)

Wear analysis of piston ring / Muhammad Ridzuwan Tukimin ...[et al.]. (2002) [Student Project] (Unpublished)

U

Evaluating the gear stress of novel reverse rotation bit manual screwdriver design for mini screw implants / Rizki Aldila Umas … [et al.]. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 175-192. ISSN (eISSN):2550-164X

W

Design and fabrication of exhaust fan cleaner / Wan Amir Faisal Wan Adzmani. (2022) [Student Project] (Submitted)

G-Clamp by sand casting / Wan Saiful Azali Wan Ayob, Mohamed Ridzuan Mohamed Rashid and Ahmad Fadzlan Mohamed Shahiri. (2005) [Student Project] Physical copy is available on shelf (Unpublished)

Frequency Based Substructuring Method for the Investigation of the Dynamic Behaviour of a Beam Structure / Wan Imaan Izhan Wan Iskandar Mirza ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 142-154. ISSN 18235514

The effect of progressive crack on dynamic properties of simple beam using experimental modal analysis / Wan Azizan Wan Yaacob. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Development of air pollution monitoring system / Clive Allen Williams-Hunt. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam. Digital copy is downloadable on MyKM Portal

Y

Platform swa pelarasan bermotor / Hazizan Yaakob and Hisam Sanip. (1999) [Student Project] Physical copy is available on shelf (Unpublished)

Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514

Helmet towards SIRIM safety mark qualifications / Zulkefli Yusoff. (2003) [Student Project] Physical copy is available on shelf (Unpublished)

Z

Dynamic characteristics of multi-disk shaft system using the vectors of solution coefficients / Z. Hamdi Cherif and Ch. Kandouci. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 95-115. ISSN 1823-5514 ; 2550-164X

NAK Sdn Bhd: Auger Trolley / Afiqah Zahari, Muhammad Nashrullah Azemee, Muhammad Halsiff Abdul Halim. (2019) [Entrepreneurship Project] (Unpublished)

Investigation on the effect of Kenaf dust on mechanical properties of automotive brake pad / Ruzanna Inani Zaharim. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Synthesis of carbides compounds from elemental powder by mechanical milling / Aznifa Mahyam Zaharudin, Rizal Mohamaed Noor and Rasdi Deraman. (2005) [Research Reports] Physical copy is available on shelf (Unpublished)

The effect of progressive crack on dynamic properties of tapered beam using EMA / Mohd Hafiz Zaini. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Enhancement of the Postura Motergo™ test rig's dynamics / Muhamad Syamim Zainordin. (2015) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Rheological and mechanical properties of Yttria Stabilized Zirconia (YSZ) produced by ceramic injection moulding / Mahfuzah Zainudin. (2017) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Design and fabricate hand sanitizer holder for car under hot temperature / Muhammad Aiman Nazrin Zaki. (2022) [Student Project] (Submitted)

Development and kinematic analysis of crank slider mechanism (without crank wheel) / Muhammad Muizzuddin Marwan Zaley. (2022) [Student Project] (Unpublished)

Developing software for self-absorption correction for gamma spectrometry of soil and water samples based on MCNP5 monte carlo simulations / Eliyeh Zamani …[et al.]. (2020) Scientific Research Journal, 17 (2). pp. 13-32. ISSN 2289-649X

Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri. (2006) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Airflow study of air-cooled chillers installed at different floor level / Nur Faranini Zamri. (2020) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Chemical spray trolley / Nur Daliela Wahida Zamry. (2022) [Student Project] (Submitted)

Development and kinematic analysis of scotch yoke (crank wheel) / Muhammad Afif Zawawi. (2022) [Student Project] (Unpublished)

Design and fabrication of table saw / Muhammad Irfan Hanif Zawayi. (2022) [Student Project] (Unpublished)

Automatic Feature Recognition of Chamfer and Fillet for Turning Part Model by Volume Decomposition Method / Ahmad Faiz Zubair and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 204-216. ISSN 18235514

Hydrodynamics studies of low temperature model of fluidized bed / Nurhaniza Zubir. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

The effects of normalizing and annealing on the microstructure of stainless steel / Amirah Zul Imanina Zulkifli. (2022) [Student Project] (Unpublished)

This list was generated on Thu Dec 19 00:10:43 2024 UTC.