Items where Subject is "Mechanics applied to machinery. Dynamics"

Article

A. Samat, Syafirah and Mat Isa, A.A. and Anuar, M. Azhan (2017) Performance Evaluation of Dynamic Absorbers Based on Randy Fox and Dunkerley Methods / Syafirah A. Samat ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 263-279. ISSN 18235514

Ab Latif, Nor Rosmiza (2014) Modeling of single mode ridge optical waveguide using finite different method (FDM): article / Nor Rosmiza Ab Latif. (2014) pp. 1-8.

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Parameter Magnitude-Based Information Criterion in Identification of Discrete-Time Dynamic System / Md Fahmi Abd Samad and Abdul Rahman Mohd Nasir. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 119-128. ISSN 18235514

Abdul Kadir, Ros Atikah and Sharir, NurAtira and Ismail, Muhammad Hussain (2021) Effect of heat treatment on phase transformation of niti shape memory alloy produced by metal injection moulding / Ros Atikah Abdul Kadir, NurAtira Sharir and Muhammad Hussain Ismail. (2021) Scientific Research Journal, 18 (1). pp. 73-84. ISSN 2289-649X

Abdul Nassir, Azizah and Yee, Hooi Min and Senin, Syahrul Fithry (2021) Computational mechanics analysis in elevated shell platform structures / Azizah Abdul Nassir, Yee Hooi Min and Syahrul Fithry Senin. (2021) Journal of Mechanical Engineering, 18 (3): 15. pp. 247-259. ISSN 2550-164X

Abdul Saad, Wan Aliff and Mat Dzahir, Mohd Azuwan and Mohamed, Hussein and Ahmad,, Zair Asrar and Mohamad, Maziah and Mad Saad, Shaharil and Mat Dzahir, Mohd Azwarie (2017) Posture Detection on Active and Inactive Vertebrae of Spine Biomechanics in Critical Daily Activities / Wan Aliff Abdul Saad...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 49-74. ISSN 18235514

Abdullah, Abdul Hakim and Amri, Amerul Farhan and Mohd Salleh, Farrahshaida and Abdul Halim, Nurul Hayati and Tharazi, Izdihar (2021) Effect of fibre weight fraction on the flexural and dynamic mechanical properties of arenga pinnata fibre and its hybrid composites / Abdul Hakim Abdullah ... [et al.]. (2021) Scientific Research Journal, 18 (1). pp. 197-208. ISSN 2289-649X

Abdullah, Bulan and Muhammad Yusof, Khalissah and Saad, Nor Hayati and Mokhtar, Ahmad Syazni (2018) The effects of 0.16 % Chromium + 1.32 % Nickel addition on austempered ductile Iron for mechanical properties and slurry erosion / Bulan Abdullah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 108-120. ISSN Journal of Mechanical Engineering (JMechE)

Abdullah, Mohd Azman and Ibrahim, Munaliza and Abdul Rahim, Muhammad Aliff Haika (2017) Experimental and analysis of vehicle dynamics performance based on driving behavior / Mohd Azman Abdullah... [et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 193-206. ISSN 1823-5514 ; 2550-164X

Adah, E. I. and Ibearugbulem, O. M. (2022) Simplified closed-form method to large deflection stability analysis of thin rectangular plate / E. I. Adah and O. M. Ibearugbulem. (2022) Journal of Mechanical Engineering (JMechE), 19 (1): 21. pp. 251-271. ISSN (eISSN): 2550-164X

Adull Manan, Nor Fazli and Nik Mohd Masdek, Nik Rozlin and Abdul Aziz, Qayyum and Salleh, Zuraidah (2017) The Study of Corrosion Behaviour of Cobalt-Iron (CoFe) Alloy Coating / Nor Fazli Adull Manan ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 167-183. ISSN 18235514

Ahmad, Mohd Aizad and Noor Azman, Muhammad Naqib Saifullah and Abdul Rashid, Zulkifli (2021) Hazardous area classification for wheat flour processing plant / Mohd Aizad Ahmad, Muhammad Naqib Saifullah Noor Azman and Zulkifli Abdul Rashid. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 12. pp. 172-183. ISSN (e-ISSN): 2682-8588

Ahmad, Said and Abd Rahim, Erween and Lajis, Mohd Amri and Ibrahim, Mohd Rasidi (2017) Powder Mixed Dielectric in Electrical Discharge Machining of Inconel 718 / Said Ahmad...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 110-127. ISSN 18235514

Ahmad Basri, Ahmad Burhani and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Wan Iskandar Mirza, Wan Imaan Izhan and Abu Samah, Siti Akmar (2018) Wave-Based Substructuring Method for Dynamic Behaviour Investigation of Solid Meshing Based Finite Element Model of a Structure / Ahmad Burhani Ahmad Basri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 176-186. ISSN Special Issue Advances in Engineering and Technology Vol 5 (Submitted)

Ahmad Fisal, Muhammad Azraai (2013) Effect of NACA 0010 airfoil car spoiler towards downforce and drag force: article / Muhammad Azraai Ahmad Fisal. (2013) pp. 1-6.

Ahmad Rasyid, Mohd Fadli and Salim, Muhamad Saifuddin and Zakaria, Muhammad Razlan and Mad Akil, Hazizan and Mohd Ishak, Zainal Arifin and Ahmad Thirmizir, Mohd Zharif (2018) Effect of sodium silicate on the dimensional stability and mechanical behaviour of non-woven flax reinforced acrylic based polyester composites / Mohd Fadli Ahmad Rasyid... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 233-245. ISSN 18235514

Amari, Mohamad Dzulhelmy and Che Abdullah, Sukarnur (2017) A Model for Hypersensitive Airflow Sensor Concept / Mohamad Dzulhelmy Amari ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 163-174. ISSN 18235514

Anuar*,, M. Azhan and A. Samat, Syafirah and Mat Isa, A.A. (2017) Experimental Analysis to Evaluate the Effect of Dynamic Absorber / M. Azhan Anuar...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 242-262. ISSN 18235514

Assan, Naziratie Assrinie and Ab. Ghani, Amir Radzi and Ramly, Ramzyzan (2017) Crush Response of Stacked Square Toroidal Tubes with A Central Tube / Naziratie Assrinie Assan ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 1-14. ISSN 18235514

Azmi, Nurul Izzati and Wan Dagang, Wan Nur Fatini Syahirah and Muhammad Arif, Hazwani Izzati and Sainan, Khairul Imran (2021) Pressure drop analysis in a pin type mini channel / Nurul Izzati Azmi … [et al.]. (2021) Journal of Mechanical Engineering, 18 (3): 16. pp. 261-270. ISSN 1823-5514

C.K., Ang and W.Y., Tey and P.L., Kiew and M., Fauzi (2017) An Artificial Intelligent Approach Using Fuzzy Logic for Sleep Quality Measurement / C.K. Ang...[et al.]. (2017) Special Issue Engineering for Humanity Vol 2, SI 4 (2). pp. 31-47. ISSN 18235514

Farooqi, Awais Farooqi and Othman, Muhammad Murtadha and Musirin, Ismail and Abdul Latip, Mohd Fuad Abdul Latip and Mohd Radzi, Mohd Amran and Z.Abidin, Izham and Sasi Mohammed, Daw Saleh (2021) PV system based Dynamic Voltage Restorer (DVR) in water pumping system for agricultural application / Awais Farooqi … [et al.]. (2021) Journal of Mechanical Engineering, 18 (3): 10. pp. 163-180. ISSN 2550 - 164X

Haddad, Razieh Khaksari and Reda, Eslam and Rasani, Mohammad Rasi and Malok Zedan, Cristian and Harun, Zambri (2018) Fire simulation of a scaled Mass Rapid Transit (MRT) tunnel / Razieh Khaksari Haddad ... (et al.). (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 1-17. ISSN 18235514

Hadi, Bambang K. and Ghofur, Muhammad A. and Permana, Indra (2015) The design of a high aspect ratio HALE aircraft composite wing. part I: static strength analysis / Bambang K. Hadi, Muhammad A. Ghofur and IndraPermana. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 2-11. ISSN 1823-5514 ; 2550-164X

Hanapi, Muhammad Ikhmal and Ahmad, Sufizar and Taib, Hariati and Tan, Chee Chen (2017) Physical Properties of Porcelain Ceramic with Influence of Milled Alkali Resistant (AR) Fibreglass for Sewer Pipes Application / Muhammad Ikhmal Hanapi...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 1-9. ISSN 18235514

Hasmuni, Noreriyanti and Ibrahim, Mustaffa and Raus, Azli Amin and Wahab, Md Saidin and Kamarudin, Khairu (2018) Porosity effects of AlSi 10mg parts produced by selective laser melting / Noreriyanti Hasmuni ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 246-255. ISSN 18235514

Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Takahashi, Yoshiyuki (2018) Development of a quantitative evaluation method in occupational therapy exercise for upper limb motor function rehabilitation / Hokyoo Lee ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 258-274. ISSN 18235514

Johari, Siti Nur Hasinah and Adnan, Ramli and Tajjudin, Mazidah (2020) Application of IMC-PID Controller with integer-order filter and fractional-order filter for steam distillation essential oil extraction process / Siti Nur Hasinah Johari, Ramli Adnan and Mazidah Tajjudin. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 17 (2): 1. pp. 1-7. ISSN 1985-5389

Kaur, Wandeep and Balakrishnan, Vimala (2017) Social Media Sentiment Analysis of Thermal Engineering Students for Continuous Quality Improvement in Engineering Education / Wandeep Kaur ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (1). pp. 263-272. ISSN 18235514

M. N., Muhamed and M. Z., Omar and S., Abdullah and Z., Sajuri and W. F. H., W. Zamri (2017) The Effect of Surface Texture on the Joint Shear Strength of AR500 Steel and AA7075 / M. N. Muhamed...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 289-301. ISSN 18235514

M.Yusop, Hanafi and Ghazali, M.F. and M.Yusof, M.F. and W.Hamat, W.S. (2019) Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis / Hanafi.M.Yusop ...[et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 103-122. ISSN 18235514

Mamat, Mohamad Hafiz and Parimon, Norfarariyanti and Zoolfakar, Ahmad Sabirin and Abdul Razak, Abdul Hadi and Banu, I.B. Shameem and Rusop, Mohamad (2020) The Effect of Annealing Temperature on Spin-Coated Zn-doped NiO film for humidity sensing applications / N.F.Q. Fahmi … [et al.]. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 16 (1): 15. pp. 100-105. ISSN 1985-5389

Manosroi, W. (2018) Effects of Temperature Changes, Air Velocities and Volume Fractions on the Single Droplet Evaporation Behaviors at High Ambient Temperatures / W. Manosroi. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 1-19. ISSN 18235514

Mat Dzahir, Mohd Azuwan and Mat Dzahir, Mohd Azwarie and Hussein, Mohamed and Ahmad, Zair Asrar and Mohamad, Maziah and Mad Saad, Shaharil (2017) Hysteresis Modelling of Pneumatic Artificial Muscle using General Cubic Equation and Factor Theorem Prediction Method / Mohd Azuwan Mat Dzahir...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 1-21. ISSN 18235514

Mohamad, Noor Shafini and Mahmud, Mohd Hafizi (2020) V-shaped bending support’ membantu dalam eksperimen ‘3-point bending test’ untuk tikus bersaiz kecil (V-shaped bending support helps in 3-point bending test experiment for small mice bone) / Noor Shafini Mohamad and Mohd Hafizi Mahmud. (2020) Jurnal Inovasi Malaysia (JURIM), 4 (1). pp. 1-14. ISSN 2600-7606

Mohamad Azminor, Amir Hafizin and Zabidi, Nurul Syafiqah and Murat, Bibi Intan Suraya (2021) Tensile and impact properties of hybrid composites from textile waste / Amir Hafizin Mohamad Azminor, Nurul Syafiqah Zabidi and Bibi Intan Suraya Murat. (2021) Scientific Research Journal, 18 (1). pp. 119-130. ISSN 2289-649X

Mohamed, Nor Shamsiah and Koh, Ching Theng (2018) Preparation of Siam Weed extracts / Nor Shamsiah Mohamed and Koh Ching Theng. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 268-274. ISSN 18235514

Mohammad, Ahmad Faiz and Zaki, Sheikh Ahmad and Mat Ali, Mohamed Sukri and Yakub, Fitri (2018) Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 189-204. ISSN 18235514

Mohammud@Mahmood, Mohd Mahadzir and Mohd Fauzi, Ahmad Faiz and Ismail, Noor Iswadi and Mahamad Basri, Mahamad Hisyam and Mohamad, Shamsul (2023) The effect of dual fuel producer gases with Y-shaped mixing chamber on single cylinder spark ignition engine operation / Mohd Mahadzir Mohammud@Mahmood ... [et al.]. (2023) ESTEEM Academic Journal, 19 (Sept). pp. 99-108. ISSN 2289-4934

Mohd Noh, Mohd Hafiz and Abdul Hamid, Ahmad Hussein and Koichi, Mori (2018) The length scale effect between wall and closes field point on a single turbine blade simulation / Mohd Hafiz Mohd Noh ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 155-166. ISSN 18235514

Mohd Zin, Mohd Syazwan and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Wan Iskandar Mirza, Wan Imaan Izhan and Mat Isa, Ahmad Azlan and Mohamed, Zulkifli (2017) Modal And FRF Based Updating Methods For The Investigation Of The Dynamic Behaviour Of A Plate / Mohd Syazwan Mohd Zin ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 175-189. ISSN 18235514

Muhammad Yusof, Khalissah and Abdullah, Bulan and Saad, Nor Hayati and Izzatina, Nasfati (2018) The effect of slurry erosion wear on boronized alloyed ductile iron (0.019 % Niobium and 0.145 % Vanadium) / Khalissah Muhammad Yusof ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 121-130. ISSN 18235514

Nurzaki, I. and Abdullah, A. Saifizul and Ramli, R. (2017) Experimental Validation of Vehicle Dynamic Characteristics of a Virtual Heavy Vehicle Model / I. Nurzaki ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 131-143. ISSN 18235514

S. Z., M. Rasib and N. F., Muhamad and H, M. Akil and Z. A., A. Hamid (2017) Preparation and Characterization of pH- and Temperature-responsive by Different Composition Chitosan-P(MAA-co-NIPAM) Hydrogel for Drug Delivery System / S. Z. M. Rasib ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 123-133. ISSN 18235514

Sekar, Vignesh and Zarrouq, Mazin and Namasivayam, Satesh Narayana (2021) Development and characterization of oil palm empty fruit bunch fibre reinforced polylactic acid filaments for fused deposition modelling / Vignesh Sekar, Mazin Zarrouq and Satesh Narayana Namasivayam. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 89-107. ISSN (eISSN): 2550-164X

Selamat, Farah Elida and Wan Izhan, Wan Hariz Iskandar and Baharudin, Bakhtiar Saffuan (2018) Design and Analysis of Centrifugal Pump Impeller for Performance Enhancement / Farah Elida Selamat ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 36-53. ISSN 18235514

Shing, Chee Lim and Weily, Khoo and Ching, Theng Koh (2017) Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers / Shing Chee Lim ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 246-254. ISSN 18235514

Shuib, Solehuddin and Yahya, Muhd Azman and Abdullah, Abdul Hakim and Kamaruddin, Nur Syafiqah (2018) Sound Absorption Coefficient of Coir Fibre with Poly-Lactic Acid (PLA) / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 166-175. ISSN 18235514

Syah, Arman and Astuti, Winda and Saedon, Juri (2018) Development of prediction system model for mechanical property in friction stir welding using Support Vector Machine (SVM) / Arman Syah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 216-225. ISSN 18235514

Tholibon, Dulina and Sulong, Abu Bakar and Muhamad, Norhamidi and Ismail, Nur Farhani (2017) Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 3 (2). pp. 23-35. ISSN 18235514

Umas, Rizki Aldila and Supriadi, Sugeng and Whulanza, Yudan and Ahmad Fauzi Hasan, Andi Aditya and Kreshanti, Prasetyanugraheni (2021) Evaluating the gear stress of novel reverse rotation bit manual screwdriver design for mini screw implants / Rizki Aldila Umas … [et al.]. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 175-192. ISSN (eISSN):2550-164X

Wan Iskandar Mirza, Wan Imaan Izhan and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Ahmad Basri, Ahmad Burhani and Mat Isa, Ahmad Azlan (2017) Frequency Based Substructuring Method for the Investigation of the Dynamic Behaviour of a Beam Structure / Wan Imaan Izhan Wan Iskandar Mirza ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 142-154. ISSN 18235514

Wan Jusoh, Wan Nor Shela Ezwane and Zakaria, Shukri and Yahaya, Mohamad Irwan and Mahamad Basri, Mahamad Hisyam and Daud, Razak and Ismail, Noor Iswadi (2025) New approach to minimise surface roughness in Polytetrafluoroethylene (PTFE) through robotic spindle speed control / Wan Nor Shela Ezwane Wan Jusoh … [et al.]. (2025) ESTEEM Academic Journal, 21 (March): 9. pp. 106-118. ISSN 2289-4934

Yusoff, H. and Suhaimi, S. and Hyie, K.M. and Iswadi, N. and Farhan, A. (2018) Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514

Z., Hamdi Cherif and Ch., Kandouci (2020) Dynamic characteristics of multi-disk shaft system using the vectors of solution coefficients / Z. Hamdi Cherif and Ch. Kandouci. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 95-115. ISSN 1823-5514 ; 2550-164X

Zamani, Eliyeh and Sina, Sedigheh and Faghihi, Reza and Rafsanjani, Banafshe Zeinali (2020) Developing software for self-absorption correction for gamma spectrometry of soil and water samples based on MCNP5 monte carlo simulations / Eliyeh Zamani …[et al.]. (2020) Scientific Research Journal, 17 (2). pp. 13-32. ISSN 2289-649X

Zubair, Ahmad Faiz and Abu Mansor, Mohd Salman (2018) Automatic Feature Recognition of Chamfer and Fillet for Turning Part Model by Volume Decomposition Method / Ahmad Faiz Zubair and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 204-216. ISSN 18235514

Book Section

Abdul Taha, Nazaruddin (2018) Performance of floating semi rigid pulverized fly ash stone column / Nazaruddin Abdul Taha. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 14 (14). Institute of Graduate Studies, UiTM, Shah Alam.

Mohd Huszeine, Muhammad Hariz Luqman and Hanapi, Suhadiyana (2023) Mini conveyor belt using geneva mechanism / Muhammad Hariz Luqman Mohd Huszeine and Suhadiyana Hanapi. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

Nazir, Khuzaimah (2018) Preparation and characterization of epoxidized-30% poly (methyl methacrylate)-grafted natural rubber polymer electrolytes for electrochemical double layer supercapacitor / Khuzaimah Nazir. (2018) In: The Doctoral Research Abstracts. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Thesis

Ab Latif, Nor Rosmiza (2014) Modeling of single mode optical waveguide using finite different method (FDM) / Nor Rosmiza Ab Latif. (2014) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ab Rahman, Mohamad Yasir (2010) Development of free flow water turbine floating platform for 5kW electric power generator / Mohamad Yasir Ab Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ab Wahab, Hamzah (2011) Development of a gearing mechanism for a robotic finger / Hamzah Ab Wahab. (2011) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Aziz, Asymawi (2010) Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Halim, Mohd fIkri (2009) A new design of automatic hanging system / Mohd fIkri Abd Halim. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Abd Malek, Muhamad Hafiz (2015) Performance analysis of thermal arc spray aluminium coating as a sacrificial anode / Muhamad Hafiz Abd Malek. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Abd Manan, Norliyana (2009) Development of a nacelle and generator for small horizontal axis wind turbine (HAWTs) / Siti Norliyana Abd Manan. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Abd Rashid, Mohd Ridhwan Hizami (2010) Computer simulation and turbine development for free flowing water generator / Mohd Ridhwan Hizami Abd Rashid. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Abdul Halim, Nurul Hayati and Yaakob, Mastura and Mansor, Ainun (2003) Study on tower crane / Nurul Hayati Abdul Halim … [et al.]. (2003) Diploma thesis, thesis, Universiti Teknologi Mara.

Abdul Hamid, Ahmad Hussein (2005) Development of composite panels for short span bridge construction using indigenous agro - based resources: Fabrication and mechanical testing / Ahmad Hussein Abdul Hamid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Abdul Kadir, Ros Atikah (2017) TiH₂ microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Abdul Latip, Syazuan (2014) Degradation and wear analysis of automatic transmission fluid (ATF) of 1.3l automatic transmission (AT) vehicle / Syazuan Abdul Latip. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Abdul Mubin, Abdul Adzim (2009) Post impact fatigue of fibre metal laminate (FML) / Abdul Adzim Abdul Mubin. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Abdul Rani, Muhamad Norhisham (2008) Transfer matrix method for identifying the dynamic characteristics of an exhaust system / Muhamad Norhisham Abdul Rani. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Abu Bakar, Raudah (2010) PZT MMIC via hole fabrication technique / Raudah Abu Bakar. (2010) Masters thesis, thesis, Universiti Teknologi MARA.

Adnan, Mohd Amiruddin (2010) Optimization of snap fit features design for rapid prototyping fabrication / Mohd Amiruddin Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ahmad, Lukman Hakim (2009) Development of an automatic alignment conveyor system: conveyor design / Lukman Hakim Ahmad. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Ahmad, Madya Mastika (2020) Effects of material and infill density towards adjustable headrest orthosis development based on 3D printing technology / Madya Mastika Ahmad. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Ahmad Azam, Ammar Asyraf (2010) Response of dynamic wave for stress impact on semi-SWATH / Ammar Asyraf Ahmad Azam. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ahmad Basri, Ahmad Burhani (2009) The investigation of the dynamic behaviour of a complex structure using the wave-based substructuring method / Ahmad Burhani Ahmad Basri. (2009) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad Fisal, Muhammad Azraai (2013) Effect of NACA 0010 airfoil car spoiler towards downforce and drag force / Muhammad Azraai Ahmad Fisal. (2013) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ali Sibramulisi (Hj), Azizah (2002) The effect of environment on automotive materials / Azizah Hj Ali Sibramulisi. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Alias, Aniza (2009) Surface integrity of material machined using Electrical Discharge Machining (EDM) with and without vibration / Aniza Alias. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Alias, Siti Khadijah (2010) The effects of niobium addition on mechanical and physical properties of austempered ductile iron / Siti Khadijah Alias. (2010) Masters thesis, thesis, Universiti Teknologi MARA.

Amran, Amizan (2009) Study on surface integrity of tungsten carbide macidned by die-sinking EDM using Taguchi method / Amizan Amran. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Andud, Dahia (2012) Effects of joint designs on fracture toughness of the butt welds aluminium alloy 5052 / Dahia Andud. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Anuwar, Fahteem Hamamy (2012) Classification of transient disturbance using Wavelet based support vector machine / Fahteem Hamamy Anuwar. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Asri, Ahmad Azlan (2010) CFD and wind tunnel testing for a rear car spoiler / Ahmad Azlan Asri. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Azlan, Shahrool Azree (2015) Study of windblast interface element with Postura MotergoTM test rig / Shahrool Azree Azlan. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

Baharudin, Indera Shaiful (2012) Aggregate production planning with outsourcing for wind turbine manufacturing process / Indera Shaiful Baharudin. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Bahrom, Mohd Zaki (2009) Thermal behaviour of brake pad light rail transit / Mohd Zaki Bahrom. (2009) Masters thesis, thesis, Universiti Teknologi MARA.

Basharuddin, Alyani (2010) The study on factors affecting corrosion resistance of stainless steel / Alyani Basharuddin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Borhan, Muhammad Azhanudin (2010) Optimization of cutting parameter for the drilling of medium density fiberboard / Muhammad Azhanudin Borhan. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Che Abd Aziz, Muhammad Khalid (2021) Computational fluid dynamics simulation using model from building information modeling software / Muhammad Khalid Che Abd Aziz. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Haron, Hafez (2002) Polypropylene fibre reinforced laterite bricks / Hafez Haron. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Harun, Mohd Al-Hafiz (2008) Sit-to-stand movements using PID controller / Mohd Al-Hafiz Harun. (2008) Degree thesis, thesis, Universiti Teknologi MARA.

Hishamuddin, Fadhirul Azreen (2009) Study on drilling parameters using high speed steel (HSS) and cobalt tools cutter / Fadhirul Azreen Hishamuddin. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Hussin, Hafiz Zaim (2010) Simulation of chiller water storage / Hafiz Zaim Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ibrahim, Fahizi (2002) Impact performance of glass fibre/epoxy composite material / Fahizi Ibrahim. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Ibrahim, Muhamad Yusuf (2009) Programming of control system for self-balancing scooter / Muhamad Yusuf Ibrahim. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Idris, Mohd Hafizi (2010) Computational Fluids Dynamics (CFD) analysis of UiTM Blended Wing Body (BWB) Baseline-II UAV Model without Canard at Similar Reynolds and Mach Numbers with Wind Tunnel Test / Mohd Hafizi Idris. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Ismail, Mohd Izat (2009) A study on the mixing process in the paint industries development of a drum barrel jig / Mohd Izat Ismail. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Jawahir, Mohammad Arif (2006) Wave effect on bulk carrier structure / Mohammad Arif Jawahir. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Johari, Amirul Hafiz (2010) Rheological behaviors and mechanical properties of kenaf-polypropylene composites / Amirul Hafiz Johari. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Khalid, Khairul Bahrein (2005) Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Khairul Bahrein Khalid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Khalil, Mohd Mustaffa Hafiz (2009) Experimental investigation on performance of Campro engine when modify exhaust gas extractor / Mohd Mustaffa Hafiz Khalil. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

M Saleh @ Mohd Nawi, Ahmad Fathan (2006) Primary design air compressor for force induction engine to be replace turbocharger or supercharger system / Ahmad Fathan M Saleh @ Mohd Nawi. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Manan, Siti Norain (2009) Post impact fatigue of kenaf powder, PP, MAPP laminated with kevlar hybrid composites / Siti Norain Manan. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Md Elias, Husna (2017) Synthesis and characterization of biomorphic silicon carbide from wood powders precursors / Husna Md Elias. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Mohamad, Khairol Izwan (2009) Conceptual design of human powered hydrofoil / Khairol Izwan Mohamad. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Mohamed, Marliana (2002) Hydrodynamics studies of low temperature model of fluidized bed / Marliana Mohamed. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohammad @ Yusoff, Muhammad Aiman (2010) Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Abbas, Norliana (2008) Effect of different dielectrics and work piece vibration on electrical discharge machining (EDM) / Norliana Mohd Abbas. (2008) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Adnan, Muhamad Zulhilmi (2010) Evaluation on torsion test method for composite materials / Muhamad Zulhilmi Mohd Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Daud, Mohd Nidzomuddin (2010) Experimental investigation of nanofluids in laminar and turbulent developing flow in a pipe / Mohd Nidzomuddin Mohd Daud. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Hanapiah, Zaid (2009) Prediction of material removal rate and tool wear rate in electrical discharge machining using feedforward neural network / Zaid Mohd Hanapiah. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Latafi, Muhammad Faisal (2011) Process optimization to reduce draw stage for an automotive stamped part / Muhammad Faisal Mohd Latafi. (2011) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Rodzi, Mohd Azhari (2016) Numerical analysis on the effect of built form in urban ventilation assessment / Mohd Azhari Mohd Rodzi. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

Mohd Yusof, Ahmad Fazilah (2010) Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Moohammad Musa, Syamsyeer (2016) The acceptance of Computerized Maintenance Management System (CMMS) implementation in building Facilities Management (FM): a case study / Syamsyeer Moohammad Musa. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

Nurdin, Mohd Amin (2009) Reverse engineering: a conceptual study of fatigue failure for gear application / Mohd Amin Nurdin. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Omar, Rohaizat (2022) Finite element modelling and updating for the dynamic behaviour of a structure with bolted joints / Rohaizat Omar. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Osman, Mohd. Zahir and Ahmad Salleh, Saiful Anuar (2002) Fabrication and analysis of three dimensional space truss structure / Mohd. Zahir Osman and Saiful Anuar Ahmad Salleh. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Prajadhiana, Keval Priapratama (2024) Numerical simulation and experimental verification on distortions induced by wire-arc additive manufacturing components and costing analysis / Keval Priapratama Prajadhiana. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Raheimi, Amirulaminnur (2020) Finite element analysis of guided ultrasonic waves in fiberglass composite laminates / Amirulaminnur Raheimi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Ramli, Muhammad Zahiruddin (2019) Preparation of Cu-Zn based catalysts via ultrasonic spray precipitation method for methanol synthesis / Muhammad Zahiruddin Ramli. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Ramly, Ramzyzan (2005) Stress analysis of riveted and bonded patch repairs on a stiffened panel / Ramzyzan Ramly. (2005) Masters thesis, thesis, Universiti Teknologi MARA.

Rejab, Fazlina (2005) Design of a thermoacoustic device / Fazlina Rejab. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Ridzuan, Siti Nor Syazwani (2020) Non-radial fiber turbine performance for low pressure turbine via Cfd and experimental (cold flow) / Siti Nor Syazwani Ridzuan. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Sabtu, Shahir (2010) A 3kW water-cooled Proton Electrolyte Membrane Fuel Cell (PEMFC) thermal performance analysis / Shahir Sabtu. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Sisey, Julina (2003) Software development for sprinkler calculation / Julina Sisey. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

Syed Mohd Tahir, Syed Daniel Shukri (2009) Computational analysis of thruster nozzle / Syed Daniel Shukri Syed Mohd Tahir. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Wan Yaacob, Wan Azizan (2010) The effect of progressive crack on dynamic properties of simple beam using experimental modal analysis / Wan Azizan Wan Yaacob. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Williams-Hunt, Clive Allen (2009) Development of air pollution monitoring system / Clive Allen Williams-Hunt. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Yunus, Mohd A'zmi (2008) Numerical technique based on transfer matrix method for prediction of muffler performance / Mohd A'zmi Yunus. (2008) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Zaharim, Ruzanna Inani (2010) Investigation on the effect of Kenaf dust on mechanical properties of automotive brake pad / Ruzanna Inani Zaharim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Zaini, Mohd Hafiz (2010) The effect of progressive crack on dynamic properties of tapered beam using EMA / Mohd Hafiz Zaini. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Zainordin, Muhamad Syamim (2015) Enhancement of the Postura Motergo™ test rig's dynamics / Muhamad Syamim Zainordin. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

Zainudin, Mahfuzah (2017) Rheological and mechanical properties of Yttria Stabilized Zirconia (YSZ) produced by ceramic injection moulding / Mahfuzah Zainudin. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Zamri, Huzaymi (2006) Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Zamri, Nur Faranini (2020) Airflow study of air-cooled chillers installed at different floor level / Nur Faranini Zamri. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Zubir, Nurhaniza (2002) Hydrodynamics studies of low temperature model of fluidized bed / Nurhaniza Zubir. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Ab. Rahman, Azmi and Mat Swadi, Hairulanam and Halimoon, Halek (2003) New millennium Annulus Engine Mechanism / Azmi Ab. Rahman, Hairulanam Mat Swadi and Halek Halimoon. (2003) [Student Project] (Unpublished)

Abd Halim, Nurul Atikah (2020) Study of metal detection system performance using inductive proximity sensor / Nurul Atikah Abd Halim. (2020) [Student Project]

Abd Jalil, Shukor and Jamaludin, Rohaizad (2003) To study the effects of heat treatment on the mechanical properties of weapon barrel / Shukor Abd Jalil and Rohaizad Jamaludin. (2003) [Student Project] (Unpublished)

Abd Rahman, Ahmad Haiqal (2022) Resistance of flow over submerge pillar of different surface roughness - an experiment / Ahmad Haiqal Abd Rahman. (2022) [Student Project] (Unpublished)

Abd. Ghani, Abdullah and Abd. Rahman, Mohd Fadhir (1996) Effect of loading rates to the fracture toughness on carbon manganese steel ASTM 516 grade 70 / Abdullah Abd. Ghani and Mohd Fadhir Abd. Rahman. (1996) [Student Project] (Unpublished)

Abdul, Mohamad Adam Muqri (2022) Photo analyses of a fully submerged static vehicles on different water velocity / Mohamad Adam Muqri Abdul. (2022) [Student Project] (Submitted)

Abdul Ghafar, Ahmad Farizal and Abu Hassan, Abu Sofjan (1992) Whitworth quick-return mechanism analysis / Ahmad Farizal Abdul Ghafar and Abu Sofian Abu Hassan. (1992) [Student Project] (Unpublished)

Abdul Hafiz, Mohd Shah Rizan and Wahid, Widia and Abdullah, Nur Afni and Kamaruddin, Rafidah (2003) Process study on composite products / Mohd Shah Rizan Abdul Hafiz & Widia Wahid. (2003) [Student Project] (Unpublished)

Abdul Mutalib, Syadiyatul Qistina (2020) Development of clean-up tagging system for children / Syadiyatul Qistina Abdul Mutalib. (2020) [Student Project] (Unpublished)

Abdul Rahim, Abdul Haniff (2022) Design and fabrication of portable-foot hydraulic car jack / Abdul Haniff Abdul Rahim. (2022) [Student Project] (Submitted)

Abdul Rahim, Mohd Ikmal Hisham (2020) Effect of layer thickness on repeatability of 3D printed PLA produced using 3D Espresso F220 / Mohd Ikmal Hisham Abdul Rahim. (2020) [Student Project] (Unpublished)

Abdul Rashid, Nasir (2022) Design, analysis and fabrication of full-body sanitizing machine / Abdul Rashid Nasir. (2022) [Student Project] (Unpublished)

Abdullah, Faizul Azlan (1991) Simulation of production capacity using basic language / Faizul Azlan Abdullah. (1991) [Student Project] (Unpublished)

Adnan, Abdullah Muhammad Al-Wahiduddin (2022) Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. (2022) [Student Project] (Submitted)

Ahmad Faizal, Muhammad Fahmi and Mohd Jonid, Mohd Asyraf and Zamzuri, Fakhrul Fahmi and Norkhairizal, Putri Nurin Qurratu’ Aiini and Tarmizi, Athilah Hidayah Potable moving ladder / Muhammad Fahmi Ahmad Faizal ... [et al.]. [Student Project] (Unpublished)

Ahmad Shah, Najian (2022) Solidworks design and simulation of staircase climbing trolley / Najian Ahmad Shah. (2022) [Student Project] (Submitted)

Alias, Zulkipli and Osman, Dharma (1986) Lengan robot numatik / Zulkipli Alias and Dharma Osman. (1986) [Student Project] (Unpublished)

Amir Rizal, Amira Natasha (2022) Heat transfer analysis of different cooling medium on a condenser of refrigeration system / Amira Natasha Amir Rizal. (2022) [Student Project] (Unpublished)

Amri, Nur Iffah Qharina (2022) The design of bench grinding machine using hard disk / Nur Iffah Qharina Amri. (2022) [Student Project] (Submitted)

Awin Zubir, Asaf Zubair (2022) Design and fabrication of orange and apple cutter machine / Asaf Zubair Awin Zubir. (2022) [Student Project] (Unpublished)

Azhar, Anwar Zharif (2022) Level control of process control / Anwar Zharif Azhar. (2022) [Student Project] (Unpublished)

Aziz, Nur Farahim (2022) A case study: Plan-Do-Check- Act (PDCA) cycle to reduce defects in manufacturing process of injection moulding in plastic parts / Nur Farahim Aziz. (2022) [Student Project] (Submitted)

Azmi, Mohd Luqman Hakimi (2015) Particulate matter concentration level inside air conditioned public bus in klang valley / Mohd Luqman Hakimi Azmi. (2015) [Student Project] (Unpublished)

Azmi, Muhammad Fikhran Hamsyi (2022) Design and fabricate a temperature sensor on aluminium using tilting furnace / Muhammad Fikhran Hamsyi Azmi. (2022) [Student Project] (Unpublished)

Azwan Affendi Nual, Zaim Ariefin (2020) Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual. (2020) [Student Project] (Unpublished)

Baharizam, Amirul Hakim (2022) Production design of GRP Payang potong belakang / Amirul Hakim Baharizam. (2022) [Student Project] (Unpublished)

Bakry, Norazreen (2013) The effectiveness of exhaust fan in removing CO and C0₂ in some selected classroom in Faculty of Applied Science, UiTM Shah Alam / Norazreen Bakry. (2013) [Student Project] (Unpublished)

Che Jaafar, Mohd. Ashri and Kellah, Joseph (1989) Perisian ujikaji termodinamik / Mohd. Ashri Che Jaafar and Joseph Kellah. (1989) [Student Project] (Unpublished)

Che Mohamad Noor, Ahmad Ikmal Haziq (2022) Propulsion system design of GRP payang potong belakang / Ahmad Ikmal Haziq Che Mohamad Noor. (2022) [Student Project] (Unpublished)

Dahlan, Zulkifli (1992) Merekabentuk alat pengangkat bagi mesin Instron / Zulkifli Dahlan. (1992) [Student Project] (Unpublished)

Faiza, Muhammad Nufaiel Aiman (2022) Design and fabrication of sliding platform component of Smart Parcel Drop Box (SPD) / Muhammad Nufaiel Aiman Faiza. (2022) [Student Project] (Unpublished)

Ghazali, Ahmad Arif Aiman Shah (2022) Structural analysis simulation of a component in automotive engineering / Ahmad Arif Aiman Shah Ghazali. (2022) [Student Project] (Unpublished)

Halimirizal, Mohammad Iskandar Harith (2020) Development of combination cooling method for solar-powered device / Mohammad Iskandar Harith Halimirizal. (2020) [Student Project] (Unpublished)

Hasfizal, Ikhwan (2022) Development and kinematic analysis of catapult based on different ball weight parameter / Ikhwan Hasfizal. (2022) [Student Project] (Submitted)

Husainee, Muhammad Harith Iqbal (2022) Trash can compactor / Muhammad Harith Iqbal Husainee. (2022) [Student Project] (Unpublished)

Husariman, Syahmie Arif Farhan (2022) Design and development of rocket based rubber hollow elastic ball launcher / Syahmie Arif Farhan Husariman. (2022) [Student Project] (Submitted)

Idris, Norhisham (1996) Merekabentuk dan fabrikasi klip gauge untuk ujian dinamik dan keretakan / Norhisham Idris. (1996) [Student Project] (Unpublished)

Ishak, Adam (2020) Numerical modelling on the effect of number of curvature to the velocity profile in asymmetric curve channel / Adam Ishak. (2020) [Student Project]

Ishak, Shukri and Mohd, Amiruddin (1985) Water pump using solar energy to be used in rural areas / Shukri Ishak and Amiruddin Mohd. (1985) [Student Project] (Unpublished)

Ismail, Nor Ismanadia (2022) Photo analysis of a fully submerged static vehicle in a flowing water / Nor Ismanadia Ismail. (2022) [Student Project] (Submitted)

Jamaludin, Kamilia (2020) Development of experimental setup and procedure for axial impact test of Fiber Metal Laminate (FML) plate / Kamilia Jamaludin. (2020) [Student Project] (Unpublished)

Jamaludin, Muhamad Haziq (2017) Simulation of Quick Gear Shifter (QGS) system on a single-seated open wheel vehicle using Matlab (Simulink) \ Muhamad Haziq Jamaludin. (2017) [Student Project] (Unpublished)

Jefry, Muhamad Shahmizal Hafiz (2023) Design and fabrication of automatic gear window. (2023) [Student Project] (Unpublished)

Jusoh, Siti Noorzuraidah (2010) Elastic study of quench and composite europium barium copper oxide (EuBa2Cu3O7-δ(Eul23)) superconductor / Siti Noorzuraidah Jusoh. (2010) [Student Project] (Unpublished)

K Asmadi, Ahmad Fathi Muhaimin (2022) Development and kinematic analysis of quick return mechanism (with crank wheel) / Ahmad Fathi Muhaimin K Asmadi. (2022) [Student Project] (Unpublished)

Mansor, Muhammad Asyraf (2017) Design and fabricate the cleaning cum cooling system for downdraft gasifier / Muhammad Asyraf Mansor. (2017) [Student Project] (Submitted)

Md Zain, Ahmad Yasir (2008) PIC microcontroller based temperature measuring system using thermocouple sensor / Ahmad Yasir Md Zain. (2008) [Student Project] (Unpublished)

Mohamad Rosdi, Ainul Iffat (2022) Comparative study of drag and lift force for different shapes of hydrofoils / Ainul Iffat Mohamad Rosdi. (2022) [Student Project] (Unpublished)

Mohammad Zulhaffiz, Afiq Zharfan (2022) Frequency response and transient analysis of a component in motor vehicle / Afiq Zharfan Mohammad Zulhaffiz. (2022) [Student Project] (Submitted)

Mohd Adli, Muhammad Azzahan Daniel (2022) Pressure control process / Muhammad Azzahan Daniel Mohd Adli. (2022) [Student Project] (Unpublished)

Mohd Adnan, Aidil Ashraf (2022) Development and kinematic analysis of crank slider mechanism (with crank wheel) / Aidil Ashraf Mohd Adnan. (2022) [Student Project] (Unpublished)

Mohd Arhafudin, Amni Wafiqah (2021) Mechanical and physical properties of aluminium vs steel / Amni Wafiqah Mohd Arhafudin. (2021) [Student Project] (Submitted)

Mohd Asri, Muhammad Azim Najmi (2022) Design and fabrication of moveable storage toolbox / Muhammad Azim Najmi Mohd Asri. (2022) [Student Project] (Unpublished)

Mohd Azaha, Mohd Aslam (2022) Failure mode and effects analysis in manufacturing of milling process / Mohd Aslam Mohd Azaha. (2022) [Student Project] (Unpublished)

Mohd Din, Muhammad Hafiz (2017) Effect of nozzle diameter and volume cavity at various distances for electronic cooling / Muhammad Hafiz Mohd Din. (2017) [Student Project] (Unpublished)

Mohd Faisal, Muhammad Danial Hakim (2022) Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal. (2022) [Student Project] (Unpublished)

Mohd Fekeri, Muhammad Thaqif Muqri (2022) Automatic potato peeler / Muhammad Thaqif Muqri Mohd Fekeri. (2022) [Student Project] (Unpublished)

Mohd Huszeine, Muhammad Hariz Luqman (2023) Mini conveyor belt using geneva mechanism / Muhammad Hariz Luqman Mohd Huszeine. (2023) [Student Project] (Unpublished)

Mohd Razali, Ahmad Izzuddin (2022) Water vacuum cleaner / Ahmad Izzuddin Mohd Razali. (2022) [Student Project] (Unpublished)

Mohd Shafawi, Aziz Iskandar (2022) Design and fabrication of stair climbing trolley / Aziz Iskandar Mohd Shafawi. (2022) [Student Project] (Unpublished)

Mohd Shukry, Alya Husna (2022) Automatic flour sifter / Alya Husna Mohd Shukry. (2022) [Student Project] (Unpublished)

Mohd Zainudin, Muhammad Isyraf (2022) Casing of magnetic flashlight / Muhammad Isyraf Mohd Zainudin. (2022) [Student Project] (Unpublished)

Mohd Zolkarnaine, Jonet and Kamarudin, Mohamad Nor and Zuliana, Ismail (1995) Katil istimewa / Mohd Zolkarnaine Jonet, Kamarudin Mohamad Nor and Zuliana Ismail. (1995) [Student Project] (Unpublished)

Mohd. Yusoff, Mohamad Fadli and Khalid, Muhd. Syarif and Baslan, Rosita (1996) Gas treatment (air scrubber) / Mohamad Fadli Mohd. Yusoff, Muhd. Syarif Khalid and Rosita Baslan. (1996) [Student Project] (Unpublished)

Muhammad Arsyad, Nashrol Azam (2022) Mini plastic injection moulding / Muhammad Arsyad Nashrol Azam. (2022) [Student Project] (Unpublished)

Mukhtar, Mohd. Effandy and Sahani, Muhamad Nor Taufik and Majuan, Shahirrunizan (2002) Experimental study of laminar and turbulent flow / Mohd. Effandy Mukhtar, Muhamad Nor Taufik Sahani and Shahirrunizan Majuan. (2002) [Student Project] (Unpublished)

Mukhtar, Nur Zahidatul Fathinah (2011) The investigation of mechanical properties of PVC/PEMA polymer blends using Dynamic Mechanical Thermal Analysis (DMTA) / Nur Zahidatul Fathinah Mukhtar. (2011) [Student Project] (Unpublished)

Nasarudin, Muhamad Salahuddin (2022) Design and fabrication of solar water heater / Muhamad Salahuddin Nasarudin. (2022) [Student Project] (Unpublished)

Nik Azizul, Nik Azim Akmal (2022) Design and fabrication of waste food shredder compost maker machine / Nik Azim Akmal Nik Azizul. (2022) [Student Project] (Submitted)

Nik Mohd Zaki, Nik Iqlima (2022) The influence of thickness on mild steel in rapid cooling process / Nik Iqlima Nik Mohd Zaki. (2022) [Student Project] (Submitted)

Noor Heryman, Nur Ain Jannah (2022) Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)

Noor Shamshidi, Mohd Akmal Affiq (2017) Design and analysis of sliding wear mechnism in electric train application / Mohd Akmal Affiq Noor Shamshidi. (2017) [Student Project] (Unpublished)

Norman, Muhammad Amirul (2022) Effect of different water flowrates and air velocity on a cooling tower / Muhammad Amirul Norman. (2022) [Student Project] (Unpublished)

Omar, Zarina and Mohd Yazan, Maimunatun Nawar and Mod Zahari, Iffat Asymawie and Ahmad Shakri, Nurul Izzah and Abd Razak, Nur Diana (2021) Study on the hydrogen storage properties of NaAlH4 composites using taguchi method / Zarina Omar. (2021) [Student Project] (Unpublished)

Osman Nazir, Adams Haiqal (2022) Development and kinematic analysis of quick return mechanism (without crank wheel) / Adams Haiqal Osman Nazir. (2022) [Student Project] (Submitted)

Osmin, Muhamad Shah and Mat Yusuf, Mohd Harif (2004) Fracture toughness of polymer-mixed concrete / Muhamad Shah Osmin and Mohd Harif Mat Yusuf. (2004) [Student Project] (Unpublished)

Othman, Mohamad Afif Jazimin (2022) Design and fabrication of electric skateboard with front light / Mohamad Afif Jazimin Othman. (2022) [Student Project] (Submitted)

Razae, Muhamad Syaimanfathi (2020) Post processor modification and machine simulation in 5-axis machining using Fusion 360 CAM / Muhamad Syaimanfathi Razae. (2020) [Student Project] (Unpublished)

Rifai, Mohd Nizan and Sudin, Shahidan and Ismail, Mohamad Sukri (2000) Performances of fuel injection system in diesel engine using distributor type fuel injection pump / Mohd Nizan Rifai, Shahidan Sudin and Mohamad Sukri Ismail. (2000) [Student Project] (Unpublished)

Rosli, Muhammad Izzat Hakimi (2022) Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. (2022) [Student Project] (Unpublished)

Said, Md. Asmawi and Wan Ismail, Wan Sadeli (2001) Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] (Unpublished)

Saiful Anuar, Muhammad Faris (2022) Heat transfer analysis of different cooling medium on a condenser / Muhammad Faris Saiful Anuar. (2022) [Student Project] (Unpublished)

Salyazid, Muhammad Luqman Hakim (2022) Hydraulic axle shaft puller with stand / Muhammad Luqman Hakim Salyazid. (2022) [Student Project] (Unpublished)

Schufee Amani, Suhaime (2022) Design, analysis, and fabrication of mechanical rice washing machine / Schufee Amani Suhaime. (2022) [Student Project] (Unpublished)

Shamsuddin, Ammar Imran (2022) Design and development of catapult based ping pong ball launcher / Ammar Imran Shamsuddin. (2022) [Student Project] (Submitted)

Shamsuddin, Mohd Shamsul and Mohd Sidek, Mohd Azimi (2005) Lift controller using PIC / Mohd Shamsul Shamsuddin and Mohd Azimi Mohd Sidek. (2005) [Student Project] (Unpublished)

Sudin, Muhammad Syaifulnizam (2022) Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. (2022) [Student Project] (Unpublished)

Syed Fakhrul Anwar, Sharifah Nur Alieya (2022) Manual spikey roller coconut husk peeler / Sharifah Nur Alieya Syed Fakhrul Anwar. (2022) [Student Project] (Submitted)

Tuan Mohd Shamsuddin, Tuan Syimir Hazim and Zulkifli, Alifirsyaruddin and Hasan Azhari, Muhammad Afiq (2015) Development of an automatic clothes hanger using Arduino Uno microcontroller / Tuan Syimir Hazim Tuan Mohd Shamsuddin, Alif Irsyaruddin Zulkifli and Muhammad Afiq Hasan Azhari. (2015) [Student Project] (Submitted)

Tukimin, Muhammad Ridzuwan and Zakaria, Zaidihafizi and Mahmood, Nazli (2002) Wear analysis of piston ring / Muhammad Ridzuwan Tukimin ...[et al.]. (2002) [Student Project] (Unpublished)

Wan Adzmani, Wan Amir Faisal (2022) Design and fabrication of exhaust fan cleaner / Wan Amir Faisal Wan Adzmani. (2022) [Student Project] (Submitted)

Wan Ayob, Wan Saiful Azali and Mohamed Rashid, Mohamed Ridzuan and Mohamed Shahiri, Ahmad Fadzlan (2005) G-Clamp by sand casting / Wan Saiful Azali Wan Ayob, Mohamed Ridzuan Mohamed Rashid and Ahmad Fadzlan Mohamed Shahiri. (2005) [Student Project] (Unpublished)

Yaakob, Hazizan and Sanip, Hisam (1999) Platform swa pelarasan bermotor / Hazizan Yaakob and Hisam Sanip. (1999) [Student Project] (Unpublished)

Yusoff, Zulkefli (2003) Helmet towards SIRIM safety mark qualifications / Zulkefli Yusoff. (2003) [Student Project] (Unpublished)

Zaki, Muhammad Aiman Nazrin (2022) Design and fabricate hand sanitizer holder for car under hot temperature / Muhammad Aiman Nazrin Zaki. (2022) [Student Project] (Submitted)

Zaley, Muhammad Muizzuddin Marwan (2022) Development and kinematic analysis of crank slider mechanism (without crank wheel) / Muhammad Muizzuddin Marwan Zaley. (2022) [Student Project] (Unpublished)

Zamry, Nur Daliela Wahida (2022) Chemical spray trolley / Nur Daliela Wahida Zamry. (2022) [Student Project] (Submitted)

Zawawi, Muhammad Afif (2022) Development and kinematic analysis of scotch yoke (crank wheel) / Muhammad Afif Zawawi. (2022) [Student Project] (Unpublished)

Zawayi, Muhammad Irfan Hanif (2022) Design and fabrication of table saw / Muhammad Irfan Hanif Zawayi. (2022) [Student Project] (Unpublished)

Zulkifli, Amirah Zul Imanina (2022) The effects of normalizing and annealing on the microstructure of stainless steel / Amirah Zul Imanina Zulkifli. (2022) [Student Project] (Unpublished)

ishak, Nik Mohd Ikrami and Mohamad Zali, Mohd Sabri (2003) A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. (2003) [Student Project] (Unpublished)

Entrepreneurship Project

Faizal Edzuan, Edzzry Indrawan and Abdul Muttalib, Ainul Mustaqim and Azrin, Aina Balqis and Mohamed Amir Khan, Azrief Raziq Khan and Ahmad, Azam Shah and Mohd Shah, Amierul Hakim (2016) Slice Co : Multi Meat Slicer / Edzzry Indrawan Faizal Edzuan ...[et al.]. (2016) [Entrepreneurship Project] (Unpublished)

Kamarul Zaman, Muhammad Syakir and Yahya, Mohd Fazrydeen (2017) Electro-strip / Muhammad Syakir Kamarul Zaman and Mohd Fazrydeen Yahya. (2017) [Entrepreneurship Project] (Unpublished)

Latif Pudin, Nor Atira and Mohd Yusoff, Muhamad Zuhdi and Zulkafli, Muhamad Firdaus and Hasmuni, Muhamad Nor Haziq (2017) Double U Enterprise: portable vibratory tumbler / Nor Atira Latif Pudin, Muhamad Zuhdi Mohd Yusoff, Muhamad Firdaus Zulkafli, Muhamad Nor Haziq Hasmuni. (2017) [Entrepreneurship Project] (Unpublished)

Zahari, Afiqah and Azemee, Muhammad Nashrullah and Abdul Halim, Muhammad Halsiff (2019) NAK Sdn Bhd: Auger Trolley / Afiqah Zahari, Muhammad Nashrullah Azemee, Muhammad Halsiff Abdul Halim. (2019) [Entrepreneurship Project] (Unpublished)

Research Reports

Ahmad, Farrah Noor and Mustapha @ Mustafa, Ghazirah (2010) The implementation of low cost mineral silica in underfill system / Farrah Noor Ahmad and Ghazirah Mustapha @ Mustafa. (2010) [Research Reports] (Unpublished)

Berhan, Mohamad Nor and Gnanaraj Solomon, Darius (2007) Determination of mechanical and chemical properties of brake pads for Light Rail Transit applications / Mohamad Nor Berhan and Darius Gnanaraj Solomon. (2007) [Research Reports] (Unpublished)

Mod Arifin, Ahmad Izzat and Ismail, Nuraiza and Mohd Redzwan, Fatimah Nur and Abd Kadir, Ermeey and Mohd Zin, Mazratul Firdaus (2020) A study of effect to the water pumping system powered by pv solar by removing the battery storage / Ahmad Izzat Mod Arifin ... [et al.]. (2020) [Research Reports] (Unpublished)

Zaharudin, Aznifa Mahyam and Mohamaed Noor, Rizal and Deraman, Rasdi (2005) Synthesis of carbides compounds from elemental powder by mechanical milling / Aznifa Mahyam Zaharudin, Rizal Mohamaed Noor and Rasdi Deraman. (2005) [Research Reports] (Unpublished)