Items where Subject is "T Technology > TJ Mechanical engineering and machinery > Energy consumption"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | J | M | N | R | S | W | Z
Number of items at this level: 38.

A

ID21104 Arifin, Azman (2003) Energy consumption: Characteristics and user’s attitude / Azman Arifin. Degree thesis, Universiti Teknologi MARA.

ID25884 Anyi, Richard and Masuil @Alexander, Cendric (1999) Redesigning an institutional building for low-energy using energy-10 software / Richard Anyi and Cendric Masuil @Alexander. [Student Project] (Unpublished)

ID15829 Abdul Rahman, Norhanifah (2015) Wear characterization by oil analysis in automatic and manual bus engine gearbox / Norhanifah Abdul Rahman. Masters thesis, Universiti Teknologi MARA.

ID42377 Abdul Rahman, Rohanieza and Zulkefle, Muhammad AlHadi and Herman, Sukreen Hana and Alip, Rosalena Irma (2020) Seed layer assisted growth of chemical bath deposited ZnO nanorods : influence of seed layer thickness / Rohanieza Abdul Rahman … [et al.]. Journal of Electrical & Electronic Systems Research (JEESR), 16. pp. 81-68. ISSN 1985-5389

ID31330 Abdull Razak, Razmi (2009) Surface integrity of SKD 61 machined with Electrical Discharge Machining (EDM) using Taguchi method / Razmi Abdull Razak. Degree thesis, Universiti Teknologi MARA Shah Alam.

ID40320 Abdullah Halim, Anas Zafirol and Halim, Al-Hafzan Abdullah and Ahmad Zamri, Nurhasyimah and Mat Hassan, Hasni Suryani (2012) Analisis penggunaan kecekapan tenaga terhadap sampul bangunan kajian OTTV Bangunan Canselori Universiti Sains Malaysia / Anas Zafirol Abdullah Halim ... [et al.]. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

ID28891 Ahmad Nawawi, Natasha and Singh, Ramesh and Tan, Chou Yong (2018) Consolidation of calcium phosphate powder through microwave sintering / Natasha Ahmad Nawawi, Ramesh Singh and Tan Chou Yong. ESTEEM Academic Journal, 14. pp. 10-19. ISSN 1675-7939

B

ID37763 Badrulsham, Muhammad Ikmal Hakim (2020) Development of graphical user interface for milling machine energy prediction tool / Muhammad Ikmal Hakim Badrulsham. [Student Project]

D

ID26498 Dillah, Norazilah and Sulima, Nor Zaupah (1998) Studies on cavitation / Norazilah Dillah and Nor Zaupah Sulima. [Student Project] (Unpublished)

ID45524 Dzulkefli, Muhammad Hilmi and Nur Azfahani Ahmad, Nur Azfahani and Mohd Isa, Haryati (2018) Accessing energy efficiency potential in the Malaysian Universities: the literature review / Muhammad Hilmi Dzulkefli, Nur Azfahani Ahmad and Haryati Mohd Isa. In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.

J

ID21163 Jamaludin, Rohaizad (2003) To study the effects of heat treatment on the mechanical properties of weapon barrel / Rohaizad Jamaludin. Degree thesis, Universiti Teknologi MARA.

M

ID21243 Md. Jilis, Sharum (2002) Gasoline Direct Injection - Three dimensional CFD study employing fluent V 4.25 / Sharum Md. Jilis. Degree thesis, Universiti Teknologi MARA.

ID21114 Mohamed Thaheer, Ahmad Shaqeer and Ismail, Norilmi Amilia (2017) Mission design and analysis of USM high-altitude balloon / Ahmad Shaqeer Mohamed Thaheer and Norilmi Amilia Ismail. Journal of Mechanical Engineering (JMechE), 14 (2). pp. 62-92. ISSN 1823-5514 ; 2550-164X

ID12921 UNSPECIFIED and Md Zain, Zainazlan and Ismail, Nur Sa’aidah (2009) A study of climate data using least square method and the fast fourier transform / Masriah Hj Awang, Zainazlan Md Zain and Nur Sa’aidah Ismail. Scientific Research Journal, 6 (2). pp. 31-43. ISSN 1675-7009

ID47778 Mior Shahrin, Afifah and Yusof, Mohamad Zaki (2018) Quantitative thermal comfort analysis of traditional Perak Malay Houses Aida/ Afifah Mior Shahrin and Mohamad Zaki Yusof. In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

ID31567 Mohamed Ishak, Mohamed Suhaini (2008) Impact studies of kenaf powder composite / Mohamed Suhaini Mohamed Ishak. Degree thesis, Universiti Teknologi MARA Shah Alam.

ID36614 Mohd Razuan, Mohd Syafiq (2009) Conduit for free flow river water turbine to generate lkW power for remote area / Mohd Syafiq Mohd Razuan. Degree thesis, Universiti Teknologi MARA.

ID38040 Mohd Yusof, Ahmad Fazilah (2010) Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. Degree thesis, Universiti Teknologi MARA.

ID43040 Mohd Zaidi, Zairul Fazura and Din, Abdul Talib (2012) The study of soil heat transfer characteristics for development of cost-saving air conditioning system using earth cool dehumidification method / Zairul Fazura Mohd Zaidi and Abdul Talib Din. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

ID40182 Muhamad, Jamaludin and Ahmad, Hayroman and Abdul Aziz, Azhan (2019) A comprehensive approach to passive design strategies for public hospital / Jamaludin Muhamad, Hayroman Ahmad and Azhan Abdul Aziz. In: GoGreen 2019 2nd International Postgraduate Conference on Global Green Issues, 17 September 2019, Impiana Hotel, Ipoh.

N

ID29791 Nor Izana, Mohd Shobri and Wan Noor Anira, Wan Ali@Yaacob and Norizan, Mt Akhir and Siti Rasidah, Md Sakip (2017) Carbon footprint assessment at Universiti Teknologi Mara Seri Iskandar Campus, Malaysia / ... [et al.]. Malaysian Journal of Sustainable Environment (MySE), 2 (1). pp. 59-72. ISSN 0128-326X

ID33165 Norhafizah, Yusop and Norbaizura, Abu Bakar and Suhaila, Ali and Mohd Hafiz, Saberi and Mohamad Akmal, Mohamad Najib and Noor Zawani, Yusop (2015) Solar energy : dilemma and the way forward / Norhafizah Yusop ... [et al.]. In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

R

ID21464 Rifai, Mohd Nizan and Sudin, Shahidan and Ismail, Mohamad Sukri (2000) Performances of fuel injection system in diesel engine using distributor type fuel injection pump / Mohd Nizan Rifai, Shahidan Sudin and Mohamad Sukri Ismail. [Student Project] (Unpublished)

ID47785 Razali, Khairul Nazli and Salleh, Zalida (2018) Thermal comfort in free running and mechanically conditioned learning facilities / Khairul Nazli Razali and Zalida Salleh. In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

ID39332 Remeli, Muhammad Fairuz and Rosli, Mohd Arif Fikri and Bhathal Singh, Baljit Singh (2017) Investigation of the Thermosyphon Performance for Different Working Fluids / Muhammad Fairuz Remeli ... [et al.]. Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 144-152. ISSN 18235514

ID33197 Romiza, Md Nor and Haleeda Azwa, Abdul Hadi (2015) Carbon footprint calculator for children / Romiza Md Nor and Haleeda Azwa Abdul Hadi. In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

ID47763 Roslan, Ahmad Azfar and Akasah, Zainal Abidin (2018) The implementation of solar photovoltaic installation on the rooftop of UTHM buildings / Ahmad Azfar Roslan and Zainal Abidin Akasah. In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

S

ID21746 Sh Ahmad, Sabarinah and Kamaruddin, Mohd Salleh and Salleh, Elias (2011) A study on energy (thermal) efficient aquaculture buildings for recirculating tank system / Sabarinah Sh Ahmad, Mohd Salleh Kamaruddin and Elias Salleh. [Research Reports] (Unpublished)

ID26612 Samuri, Sariman (1985) Study the performance of the four-stroke, four-cylinder petrol engine in the thermodynamic laboratory / Sariman Samuri. [Student Project] (Unpublished)

ID48269 Shaifulyazan, Sharizan and Reduan, Nor Fazira (2005) Investigation of solar food dryer characteristics / Sharizan Shaifulyazan and Nor Fazira Reduan. [Student Project] (Unpublished)

ID29548 Siti Jamiah, Tun Jamil and Nur Azfahani, Ahmad and Jasrul Jamian, Jasiman (2018) Connecting Felda communities with solar electrification during flood disaster : the methodology / Siti Jamiah Tun Jamil, Nur Azfahani Ahmad and Jasrul Jamian Jasiman. Malaysian Journal of Sustainable Environment (MySE), 4 (1). pp. 57-76. ISSN 0128-326X

ID43023 Soltani, Ali and Mehraein, Mehrnaz (2012) An analysis of urban features on energy consumption at neighborhood scale / Ali Soltani and Mehrnaz Mehraein. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

ID24314 Suhaimi, Muhammad Ridhwan (2017) Evaluation of energy uses for two types of holing method / Muhammad Ridhwan Suhaimi. [Student Project] (Unpublished)

W

ID21207 Wan Mohamad, Wan Sulaiman and Ab. Wahab, Muhamad Nizam (2004) Building energy savings / Wan Sulaiman Wan Mohamad and Muhamad Nizam Ab. Wahab. [Student Project] (Unpublished)

ID40250 Wan Abdullah, Wan Nur Hanani and Hamimi, Asniza and Ismail, Asmat (2019) Systematic literature review (SLR) on the factors affecting distribution of natural lighting inside classrooms / Wan Nur Hanani Wan Abdullah, Asniza Hamimi Abdul Tharim and Asmat Ismail. In: GoGreen 2019 : 2nd International Postgraduate Conference on Global Green Issues, 17 September 2019, Impiana Hotel, Ipoh.

ID16136 Wan Din, Wan Isni Sofiah and Yahya, Saadiah and Taib, Mohd Nasir and Mohd Yassin, Ahmad Ihsan and Razali, Razulaimi (2016) Developing multi-tier network design for effective energy consumption of cluster head selection in WSN / Wan Isni Sofiah Wan Din … [et al.]. Scientific Research Journal, 13 (1). pp. 116-130. ISSN 1675-7009

Z

ID40156 Zainun, Ayib Rosdi (2012) Characterization of tmed-copper (I) iodide (Cul) thin film and performance for solid state dye sensitized solar cell applications / Ayib Rosdi Zainun. PhD thesis, Universiti Teknologi MARA.

ID30586 Zakaria, Muhammad Zahizan (2017) Investigation of milling parameters for minimizing consumption of energy / Muhammad Zahizan Zakaria. [Student Project] (Unpublished)

This list was generated on Tue Jul 27 23:37:23 2021 +08.