Items where Subject is "Heat engines"

A

A. Aziz, Mohd Shariman (2019) Heat distribution simulation of a phase change memory with separated heater structure / Mohd Shariman A. Aziz. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Hadi, Mohd Hefni (2017) Design and fabricate heat exchanger for downdraft gasifier / Mohd Hefni Abdul Hadi. (2017) [Student Project] (Unpublished)

Abdul Mulok, Wan Fathiah (2009) Heat transfer simulation of CPU with respect to heat geometry components / Wan Fathiah Abdul Mulok. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Abdullah @ Ghazali, Faten Fazrin (2019) Thermos-physical properties and heat transfer characteristics of water MWCNT-Fe3O4 based hybrid nanofluid as a coolant for car radiator / Faten Fazrin Abdullah @ Ghazali. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Amkaromi, Amiruddin (2018) Development of adaptive controlled natural gas transmission water bath heater using mathematical model / Amiruddin Amkaromi. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Anuar, Megat Syamshul and Mohd Raffi, Mohamad Arief (1996) Penunjuk suhu bersiren / Megat Syamshul Anuar and Mohamad Arief Mohd Raffi. (1996) [Student Project] (Unpublished)

H

Habib, Khairul and Kamaruzzaman, Nurul Afiqah (2018) Performance study of adsorption cooling system driven by waste heat from automobile engine / Khairul Habib and Nurul Afiqah Kamaruzzaman. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 79-89. ISSN 18235514

Hamid, K.A. and Azmi, W.H. and Nabil, M.F. and Mamat, Rizalman (2017) Heat transfer augmentation of mixture ratio TiO2 to SiO2 in hybrid nanofluid / K.A. Hamid...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 51-63. ISSN 18235514

Harun, Muhammad Noor and Abdul Wahab, Hisham (1994) The study of heat treatment activities in Malaysia / Muhammad Noor Harun and Hisham Abdul Wahab. (1994) [Student Project] (Unpublished)

Hussein, Hambali and Kasbon, Hairiazlan and Ibrahim, Jan Mohammad Zain (1994) Landscaping for heat rejection design of natural convection cooling device / Hambali Hussein, Hairiazlan Kasbon and Jan Mohammad Zain Ibrahim. (1994) [Student Project] (Unpublished)

I

Idrus, Fairosidi (2020) An experimental investigation on thermal behavior and performance of sintered-wick cylindrical heat pipe at steady-state and transient response / Fairosidi Idrus. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Idrus, Fairosidi and Yaakob, Yusli and Abdul Razak, Muhammad and Mohamed, Mazlan and Abd. Razak, Azli and Abdullah, Mohd Zulkifly and Abdullah, Muhammad Khalil (2011) The effect of wick structure and filling ratio to the vapour chamber performance in electronic cooling system using an experimental method / Fairosidi Idrus ... [et al.]. (2011) ESTEEM Academic Journal, 7 (1). ISSN 1675-7939

Ismail, Muhammad Asyraaf and Wan Mohamad, Wan Nurhakim Hazuan and Mustapai, Mohamed Arif and Ab Manan, Sahal and Mohd Hairii, Amirull Danial (2019) New Product Development (NPD) report: intelligent gas leaking detector / Muhammad Asyraaf Ismail, Wan Nurhakim Hazuan Wan Mohamad ... [et al.]. (2019) [Entrepreneurship Project] (Submitted)

Ismail, Rosazman (2005) Heat flow characteristics through low-slope metal deck roofs / Rosazman Ismail. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail Rajab, Mohd Faisal (2001) The heat pump components and structural engineering drawing by autocad / Mohd Faisal Ismail Rajab. (2001) [Student Project] (Unpublished)

J

Jaddoa, Ameer Abed (2022) Experimental investigation of supercritical fluid heat transfer properties in a miniature heat sink / Ameer Abed Jaddoa. (2022) Journal of Mechanical Engineering (JMechE), 19 (2): 23. pp. 41-64. ISSN (eISSN): 2550-164X

Johari, Amir Harith (2020) The construction of salinity gradient solar pond for heat storage / Amir Harith Johari. (2020) [Student Project] (Unpublished)

K

Kamal Azman Shah, Siti Norshafiqah (2022) Investigation on pressure variation of steam on efficiency of steam powered motor / Siti Norshafiqah Kamal Azman Shah. (2022) [Student Project] (Submitted)

Khalid, Saifuddin and Zakaria, Irnie Azlin and Wan Mohamed, Wan Ahmad Najmi (2019) Comparative analysis of thermophysical properties of Al2O3 and SiO2 nanofluids / Saifuddin Khalid ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 153-163. ISSN 18235514

L

Lenjau, William (2003) To study the effect of variable loading on fatigue properties of heat treated aluminum alloy 6063-T5 / William Lenjau. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

M

Mamat, Mohamad Hafiz and Parimon, Norfarariyanti and Zoolfakar, Ahmad Sabirin and Abdul Razak, Abdul Hadi and Banu, I.B. Shameem and Rusop, Mohamad (2020) The Effect of Annealing Temperature on Spin-Coated Zn-doped NiO film for humidity sensing applications / N.F.Q. Fahmi … [et al.]. (2020) Journal of Electrical and Electronic Systems Research (JEESR), 16 (1): 15. pp. 100-105. ISSN 1985-5389

Mohamad Suren, Sabrudin (2009) The effect of copper on hot shortness of low carbon aluminium killed steel in thin slab casting / Sabrudin Mohamad Suren. (2009) Masters thesis, thesis, Universiti Teknologi MARA.

Mohamed Zaharin, Muhammad Syarifuddin and Abdullah, Nik Rosli and Badrulhisam, Najmi Haziq and Hamzah, Fazlena and Majeed Ali, Obed (2018) Estimation method of heating value properties on variations of alcohol-gasoline blends and volume percentages / Muhammad Syarifuddin Mohamed Zaharin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 20-35. ISSN 18235514

Mohd, Zahiruddin (2006) Effect of sintering temperature on mechanical properties of alumina component / Zahiruddin Mohd. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Khalid, Zahrom (1992) Heat rate study in thermal power plant / Zahrom Mohd Khalid. (1992) [Student Project] (Unpublished)

Muda, Mohd. Adami (2005) Stress analysis of the piston due to pressure using finite element analysis (FEA) software / Mohd. Adami Muda. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Musa, Ahmad Shauqi (2009) Prediction of an aeroengine performance analysis and thermodynamic parametric study (fan pressure ratio) / Ahmad Shauqi Musa. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Musa, Mohd Kholid and Abu Bakar, Mohd Hanif (2001) Heat transfer theory represently by heat pipe / Mohd Kholid Musa and Mohd Hanif Abu Bakar. (2001) [Student Project] (Unpublished)

N

Ngah, Mohamad (2003) Performance analysis and comparison between port and direct injection for gasoline engines / Mohamad Ngah. (2003) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nicholas, Hilary Nicholas and Magaswaran, Kumaresan and Jayapal, Vikneswary (2018) Fuel consumption reduction by increasing thermal efficiency through heating of fuel / Edmund Hilary Nicholas ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 103-110. ISSN 18235514

Niti, Kammuang-lue and Kritsada, On-ai and Phrut, Sakulchangsatjatai and Pradit, Terdtoon (2017) Thermal Characteristics of a Rotating Closed-Loop Pulsating Heat Pipe Affected by Centrifugal Accelerations and Numbers of Turns / Niti Kammuang-lue ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 35-50. ISSN 18235514

O

Othman, Muhammad Isa (2006) Experimental investigation on the performance of car radiator fan / Muhammad Isa Othman. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

S

S. Z., M. Rasib and N. F., Muhamad and H, M. Akil and Z. A., A. Hamid (2017) Preparation and Characterization of pH- and Temperature-responsive by Different Composition Chitosan-P(MAA-co-NIPAM) Hydrogel for Drug Delivery System / S. Z. M. Rasib ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 123-133. ISSN 18235514

Said, Nazri (1985) Heat treatment and its effect on mechanical properties of grey and nodular cast irons / Nazri Said. (1985) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Shahidin, Mohd Noorhafiz (2010) Thermal performance analysis of heat exchanger with perforated pin fins / Mohd Noorhafiz Shahidin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Su Piang, Nadthawuth Ketnukkunn and Mohd Hafifi, Muhammad Hazwan and Khairunnizam, Muhammad Khairil Iman and Soom Nek, Chanafonthisa and Muhammad Faiq Mamesah, Nur Emilia Sofea (2020) ACSES: Automobile Coolant Sensor System / Nadthawuth Ketnukkunn Su Piang ... [et al.]. (2020) In: International Innovation, Invention and Design Competition, 17 May-10 Oct 2020.

W

Wakiman, Samirudin and Abd Hamid, Abdul Halim Membikin modal dinamik ayunan kenderaan untuk mengkaji penyerapan kejutan / Samirudin Wakiman and Abdul Halim Abd Hamid. [Student Project] (Unpublished)

Y

Yusoff, Nasri (1985) Heat treatment of iron and steel / Nasri Yusoff. (1985) Diploma thesis, thesis, Institut Teknologi MARA.

Z

Zahariah, Shafudin and Md. Hasan, Abd. Majid and Mohd Ramlan, Norazman (1995) The studies of cogeneration systems / Shafudin Zahariah, Abd. Majid Md. Hasan and Norazman Mohd Ramlan. (1995) [Student Project] (Unpublished)

Zaini, Muhammad Syazani Farhan (2020) Performance evaluation of thermal barrier coating on heat shield for electrical turbo compounding system / Muhammad Syazani Farhan Zaini. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Zainuddin, Mohd Hafiz and Keya Nordin, Fadhlul Wafi (2005) Studies the effect of injection pressure with porosity level and hardness in hot chamber die Casting process / Mohd Hafiz Zainuddin, Fadhlul Wafi Keya Nordin. (2005) [Student Project] (Unpublished)

Zulkifli, Wan Ahmad Shahril (2017) The waste heat recovery for power generation from automotive exhaust using Thermal-electric Cell (TEC) / Wan Ahmad Shahril Zulkifli. (2017) [Student Project] (Unpublished)