Items where Subject is "Furniture"

Library of Congress Subject Areas (26)
- T Technology (26)
  - TS Manufactures (3)
    - Furniture (28)
      - Chairs (28)

Group by: Creators | Item Type

Jump to: A | B | C | D | E | F | H | I | J | K | M | N | O | P | R | S | T | V | W | Y | Z

Number of items at this level: 278.

A

Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab Manan. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of hybrid particleboard made from admixture material of Kelempayan, durian husk and oil palm frond in relation to different resin content / Norani Shuhada Abd Kadir. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Perabot Mak Kau Hijau / Faris Aizuddin Abd Samat. (2021) [Entrepreneurship Project] (Unpublished)

Mechanical properties of composite panel from sugarcane baggase, oil palm frond and fiberglass – an alternative for furniture material / Fareezal Abd. Wahab. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Bedside table with malay carved ornaments' themes / Ahmad Fathorni Abdul Ghani. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Compact workstation from Kelempayan (Neolamarckia cadamba) / Nur Hannani Abdul Latif … [et al.]. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Chess square table from machining wood waste / Nur Hannani Abdul Latif …[et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Rosza / Hafiza Nisya Azwa Abdul Malek. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 36. ISBN 9789672948254

Eastern Suria Sdn. Bhd. / Mohd Razali Abdul Rahim... [et al.]. (2002) [Entrepreneurship Project] (Unpublished)

Laminated bamboo side table with 70 degree of curvature leg / Nur Farah Dayana Abdul Rahim. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Full vanity mirror with storage from pine wood and epoxy / Puteri Nurul Fatihah Abdul Rahim. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Coffee table from treated Kelempayan wood / Irsalina Syaza Abdul Rahman. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

ARMA: rocking chair / Muhammad Fuad Abdul Rahman. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 218. ISBN 978-967-2948-25-4 (Submitted)

The factors that influence teak furniture sales at Temerloh town / Muhammad Hairul Abdul Razak. (2013) [Student Project] (Unpublished)

Design of stacking oriented coffee table/ Muhammad Syafiq Abdul Razak. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Aging effect of urea formaldehyde on particleboard with different resin content (Endorspermum sp.) / Nuraisyah Abdul Razak. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Compact workstation from kelempayan (neolamarckia cadamba)/ Azuandi Abdullah. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Modern chevron coffee table using wood waste / Haifa Nur Dinie Abdullah. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties roughness of sand papers and layers of shellac on acacia mangium wood / Nik Mohd Izwan Abdullah. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Strength properties of single dowel joint using kelempayan wood and oil palm trunk / Mohd Fazli Abu Hassan, Ahmad Fauzi Awang @ Othman and Asnawi Serailla. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Performance of dowels in furniture joint / Nurul Ain Abu Hassan. (2008) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

SHELBY: armchair / Anis Syazwani Abu Solihim. (2022) In: MINDAREKA HYBRID 2022: Programme Book. Universiti Teknologi MARA, Kedah, p. 172. ISBN 9789672948254

RAIE: arm chair / Abdul Falakh Abunloh Lahuya. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 154. ISBN 978-967-2948-25-4 (Submitted)

Multipurpose key storage / Muhammad Aliff Ashraf Adnan. (2019) [Student Project] (Unpublished)

Adjustable tabletop / Nur Aisha Fariha Afandi ... [et al.]. (2020) In: The 9th International Innovation, Invention & Design Competition, 17 May - 10 Oct 2020, Perak, Malaysia.

Xbiscus: Dante Chair / Jasshira Ahmad. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 164. ISBN 9789672948254

Finishing properties of a coffee tray from (neolamarckia cadamba)/ Nurulnajihah Ahmad. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Tensile strength behavior of laminated veneer lumber / Zakiah Ahmad … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Portable stylish television stand made from resin-treated Kelempayan (Neolamarckia cadamba) / Natrah Ahmad Fauzi. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Quitos / Ainur Quraini Ahmad Radzi. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 21. ISBN 9789672948254

Sz shape side table from kelempayan wood (neolamarckia cadamba) / Hadi Shapii Ahmad Shapi'i. (2019) [Student Project] (Unpublished)

Sifat-sifat anatomi dan morfologikal gentian kayu kelempayan / Junaiza Ahmad Zaki …[et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Spindlar: arm chair / Muhammad Hazim Ahmad Zawawi. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 158. ISBN 9789672948254

Development of a prototype ergonomic height adjustable desk / Ammar Hakim Aidi. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Ergonomic height adjustable desk / Ammar Hakim Aidi and Nurul Hanna Mas’aud. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-18-1

Effects of density and press temperature on dried leaves particleboard / Nurizma Zulaila Akmen. (2018) [Student Project] Physical copy is available on shelf (Unpublished)

Smart chair / Mohd Nasir Ali ... [et al.]. (2019) In: Academic Intellectual International Invention, Innovation & Design Book. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 74. ISBN 9789670314716

3D finite element analysis of a wood dowel in bending perpendicular to the grain / Haslin Idayu Amaruddin and Rohana Hassan. (2022) Gading Journal of Science and Technology, 5 (1): 9. pp. 69-76. ISSN 2637-0018

ENT 530 Social Media Portfolio: Jointhree / Muhammad Nizar Amat Yahaya. (2021) [Entrepreneurship Project] (Unpublished)

ATHENA: bowl chair / Nur Aisyah Annuar. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 204. ISBN 978-967-2948-25-4 (Submitted)

The gold of Kinabalu in wood appreciation (console table) / Nurul Fatehah Anuar. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 79. ISBN 9789672948254

Armonts armchair / Nashrah Arif Azli. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 6. ISBN 9789672948254

Design and fabricate of portable and multifunction shoe rack / Farez Azra'e Arman and Radzi Abdul Rasih. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

Design and fabricate of portable and multifunction shoe rack / Farez Azra’e Arman. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Public space hanging chair / Muhammad Afiq Akmal Aswadi. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 75. ISBN 9789672948254

Foldable laptop table / Muhammad Azman Azamy. (2019) [Student Project] (Unpublished)

TRICA: lounge chair / Maria Batrisya Azhar. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 168. ISBN 9789672948254

Zenith console table / Nur Saffawati Nazihah Azhar. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 59. ISBN 9789672948254

ARIES: lounge chair / Nur Fatin Aniesya Azizul Aziz. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 216. ISBN 978-967-2948-25-4 (Submitted)

Mossy touch table / Nur Fatin Aniesya Azizul Aziz. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 73. ISBN 9789672948254

Azdra armchair / Mohammad Azim Azman. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 19. ISBN 9789672948254

Violet the carpenter / Amirul Hakimi Azni ... [et al.]. (2022) [Entrepreneurship Project] Physical copy is available on shelf (Unpublished)

Design and fabrication of foldable and adjustable desk / Muhammad Ammar Amsyar Azran. (2022) [Student Project] Physical copy is available on shelf (Unpublished)

Design, analysis and fabricate of foldable and adjustable desk / Muhammad Ammar Amsyar Azran and Mohd Fadzli Ismail. (2022) In: Prototype Design Collection Series 1. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-07-5

Water droplet: cantilever chair / Nurazrin Azuzin. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 212. ISBN 9789672948254

B

SL Homedeco / Nurul Aliya Bakhtiar. (2021) [Entrepreneurship Project] (Unpublished)

Effect of chemical composition in oil palm trunk towards to furniture manufacturing process/ Asyraf Aminuddin Bani Amin. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Adjustable laptop table with DIY concept / Zamri Buhari, Nur Hannnani Abd Latif and Shaikh Abdul Karim Yamani Zakaria. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Spila armchair / Muhammad Haikal Bukhari. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 4. ISBN 9789672948254

C

Multipurpose table using knockdown concept / Che Zulkhairi Iswandi Che Hamid. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Coffee table with sliding book case / Che Mohamad Azrul Che Lah. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Coffee table with sliding book case / Che Mohamad Azrul Che Lah and Norashikin Kamarudin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Sliding mirror storage box from block board / Mohamad Hashimie Che Soberi. (2019) [Student Project] (Unpublished)

Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

D

T&C Furniture / Nurina Mulhiwaty Damanhuri … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. (Submitted)

E

Renjana : tepak sirih in wood appreciation / Eqbal Naqib Elmi-Rizal. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 53. ISBN 9789672948254

Ro-Mantis: lounge chair/ Eqbal Naqib Elmi-Rizal. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 156. ISBN 9789672948254

Finishing properties of laptop table from Kelempayan (neolamarckia cadamba) wood / Engku Syahmi Arif Engku Ahmad Fakri. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

F

Design and fabrication of iron board / Faris Danial Fairuz. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Design and fabrication of iron board / Faris Danial Fairuz and Radzi Abdul Rasih. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

H

Design and fabrication of height adjustable study table / Haikal Hakimi and Nurulsaidatulsyida Sulong. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

Design and fabrication of height adjustable study table / Muhammad Haikal Hakimi. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Blueprint : TROCh “Foldable Trolley And Chair” / A’isyatul Humaira’ Halim. (2020) [Entrepreneurship Project] (Submitted)

Underveil throne armchair / Noor Atikah Hamdan. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 44. ISBN 9789672948254

Finishing properties of a bookshelf from Kelempayan (neolamarckia cadamba) / Nurfarhana Hamdan. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Carrotera / Siti Batrisyia Hammad. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 46. ISBN 9789672948254

Cindai-Japanese moku-zogan / Aidil Fitra Hariffadilah. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 51. ISBN 9789672948254

THE MANTIZZ: armchair / Aidil Fitra Hariffadilah. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 160. ISBN 9789672948254

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Finishing properties of polyurethane lacquer on acacia wood / Asminudin Hasanuddin. (2013) [Student Project] (Unpublished)

Properties of oil palm empty fruit bunch fibers, coconut husk and polypropylene composite - potential furniture material / Mohd Jafni Hashim. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Flexi shoe rack / Muhammad Amirul Hakim Hassan … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Product development of mini pantry cupboard from medium density fibreboard / Noor Hazaruliza Hassan. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Multifunction garment rack from rubberwood / Mohd Syafirul Alif Hisham. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Mechanical properties of Kedondong, Meranti, and Mersawa affect by steaming treatment / Mohd Najib Husin. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Design laminated bamboo side table with 50 degree of curvature leg/ Syuwari Husin. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Mariposa / Siti Khadijah Hussain. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 38. ISBN 9789672948254

I

Furniture ergonomics for elderly care centre / Damia Adlina Ibrahim. (2021) Degree thesis, thesis, Universiti Teknologi MARA (Kampus Puncak Alam).

Hybrid laminated bamboo veneer board for furniture component / Muhamad Iqram Ibrahim … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 160. (Submitted)

Finishing properties of coffee table by using kelempayan (Neolamarckia cadamba) / Hanis Afiqah Idrus and Junaiza Ahmad Zaki. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Finishing properties of polyurethane lacquer and nitrocellulose lacquer on Mengkulang (heritiera sp) / Khairunnazaty Ishak. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Insectra armchair / Muhammad Syakir Aizat Ishak. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 30. ISBN 9789672948254

The application of finishing on writing table / Imnizan Ismail. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Coffee table from hevea melamine / Muhammad Syarif Ismail. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Hidden storage side table / Muhd Faiz Ismail. (2020) [Student Project] (Unpublished)

Finishing properties of corner rack from Kelempayan (Neolamarckia cadamba) / Nor Izati Ismail. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Furniture design : Television cabinet using recycle materials (solid wood waste) / Syazwan Iza. (2016) [Student Project] (Unpublished)

J

Mesabu from bamboo strips (Bambusa vulgaris) / Ema Syahira Jaafar. (2019) [Student Project] (Unpublished)

A study on demand of home furniture in Courts Mammoth branch Temerloh, Pahang / Muhammad Nizam Jamaludin. (2011) [Student Project] (Unpublished)

Demand on home furniture in Courts Mammoth Temerloh Branch / Muhammad Nizam Jamaludin and Abdul Jalil Ahmad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Finishing properties from Kelempayan by using different abrasive paper and varnish / Nor Syahirah Jaus. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Finishing properties on particleboard from Gliricidia sepium / Nur Ain Jemain. (2013) [Student Project] (Unpublished)

Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

The effect of sealant as a finishing on a wood panel (plywood) / Shuhaili Johar. (2013) [Student Project] Digital copy is available in CD (Unpublished)

Effect of sealant on some finishing properties of commercial plywood / Shuhaili Johar, Shaikh Abdul Karim Yamani Zakaria and Norhafizah Rosman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Feet first (rotatable shoe rack) / Sarah Najwa Junaidey ...[et al.]. [Student Project]

Factors influenced the school chair failure/ Nur Afihah Jusoh. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

K

Compact book rack made from kelempayan (neolamarkia cadamba) and blockboard / Sadam Kahar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (Endospermum diadenum)/ Zilawati Kamal. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (endospermum diadenum) wood / Zilawati Kamal and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Consumption of furniture made from panel products among bumiputeras at Bandar Tun Abdul Razak Jengka / Muhammad Faiz Kamarudin. (2013) [Student Project] (Unpublished)

Bamboo partition / Norashikin Kamarudin … [et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Selfie sofa with flexible arrangement / Norashikin Kamarudin … [et al.]. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Properties of three layer muf particleboard from bamboo (Gigantochloa Scortechinii) / Jamaludin Kasim. (2003) Universiti Teknologi MARA Cawangan Pahang, 1,2 (8). pp. 1-4. ISSN 0128-5599

Mechanical and physical properties of araucaria fibre-polypropylene composite / Jamaludin Kasim, Wan Nazri Wan Abd Rahman and Suriana Husin. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 1-9. ISSN 0128-5599

Bending strength of mersawa at different tree portion / Salenda Kasim. (2012) [Student Project] (Unpublished)

Furniture design: Brick Chair / Muhamad Salimi Khairudin. (2012) [Student Project] (Unpublished)

Epoxy resin: coffee table from Casuarina equisetifolia slab / Imaduddin Khairul Aznam. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard from leuceana leucocephala wood/ Noor Zaliani Khozan. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

M

Strength properties of finger jointed wood from fast growing species / M Rafais M Razip, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Hybrid coffee tabletop from off-cut tree branches and epoxy resin / Siti Zalifah Mahmud ... [et al.]. (2020) In: International Innovation, Invention and Design Competition, 17 May-10 Oct 2020.

Properties of wood cement board (WCB) made from Sentang (Azadirachta excelsa) particles / Iffah Izzah Maidin. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Screw-withdrawal properties of batai (Parensenthes falcataria) particleboard / Safura Mamat, Nurrohana Ahmad and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Relationship between customer’s preference and satisfaction on the material of making furniture in Temerloh town / Nor Shahira Masdan. (2013) [Student Project] (Unpublished)

Properties of finger joint effect by diferrent types of adhesive and alignment / Muhammad Shahedie Mat Anuar. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Anokha's / Naimah Mat Saman. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 23. ISBN 9789672948254

Side table from oil palm lumber (OPL) (Elaeis guineensis) / Muhammad Arbain Mat Yuti. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Side table from oil palm lumber / Muhammad Arbain Mat Yuti and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multipurpose table kids / Zulkhanain Mat Zain and Norhafizah Rosman. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Satisfactions of student towards school furniture/ Sapura Mat Zanggi. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Satisfactions of student towards the school furniture / Sapura Mat Zanggi and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard from neolamarckia cadamba (kelempayan) / Ahmad Afiq Mat Zlan. (2014) [Student Project] (Unpublished)

Live edge emerald green resin art side table / Nurul Basirah Md Ali. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Finishing properties of nitrocellulose (nc) on mersawa wood by steam treatment / Mazulizam Md Ali Hanapiah. (2013) [Student Project] (Unpublished)

Multifunction bookshelves combine with table study and chair / Mohd Amar Md Aliudin, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: UNSPECIFIED.

A simple storage chair / Muhamad Basri Md Daud, Norashikin Kamarudin and Asnawi Seraila. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Pine board storage keeper / Mohamad Asyraaf Md Johari. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Crownie: bar stool / Nur Ainn Md Khotar. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 226. ISBN 9789672948254

Machining properties of 25 and 50 years old treated oil palm lumber / Muhamad Hafiz Md Saad. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Noise pollution in wooden furniture industry / Aishah Md Yunos and Suhaimi Muhamed. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Cangkuk / Mohamad Haikal Mezan. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 8. ISBN 9789672948254

To set up a small factory that manufacture furniture for office or class room / Ariff Mitik and Nik Ahmad Mazli Nik Mohammad. (1988) [Student Project] Physical copy is available on shelf (Unpublished)

Multifunction rack made from kelempayan (neolamarkia cadamda) / Mohammad Faize Moftar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Hardness properties of rubberwood finishing effected by finishing materials and curing variables / Azlan Mohamad. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

The strength of mortise & tenon and dowel joint from coconut trunk (Cocos nucifera) / Mohd Arif Fikri Mohamad Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

MONSTERA: lounge chair / Nur Syafiyah Mohamad Kamal. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 166. ISBN 9789672948254

Properties of particleboard made from recycle board and wood slabs / Ramli Mohamad Khanafiah. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

ENT530 : Business Model Canvas: Queenz Furniture Enterprise / Nur Hasanah Mohamad Khizam ... [et al.]. (2021) [Entrepreneurship Project] (Unpublished)

Side table with reflected lamp / Muhammad Bukhari Mohamad Nadzrin. (2020) [Student Project] (Unpublished)

Influence of the oil palm trunk and acacia mangium on the particleboard Properties / Abdul Hakim Baihaqi Mohamad Noor, Zaimatul Aqmar Abdullah and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Symphony armchair / Mohamad Muizzuddin Mohamad Nurul Azmi. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 2. ISBN 9789672948254

Abacate / Mohamad Hisyam Husaini Mohamad Zaki. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 16. ISBN 9789672948254

Comparison of anthropometric data of 18-25 age (IPT Students) with 18-25 age (NON Students) / Mohamed Azmi Mohamed Ripin. (2013) [Student Project] (Unpublished)

Comparison of anthrophometric data of IPT student with non student with ages of 18-25 years / Mohamed Azmi Mohamed Ripin and Norhafizah Rosman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Multipurpose cabinet using knockdown concept / Md Azharulzaman Mohamed Said. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Effects of mechanical properties and water resistance of particleboard from Kelempayan (Neolamarckia cadamba) wood with variation of hot pressing temperatures and board densities / Nur Sakinah Mohamed Tamat, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Furniture design in district of Temerloh/ Nor Azura Mohammed Shariff. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Furniture design in Temerloh and Jengka / Nor Azura Mohammed Shariff and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Finishing properties of multipurpose desk by using kelempayan (neolamarckia cadamba)/ Muhammad Imran Mohamod @ Muhd Apipi. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Cacti armchair / Nur Nadia Qistina Mohd Adnan. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 25. ISBN 9789672948254

Bench shoes storage / Luqman Hakim Mohd Agus Adib. (2019) [Student Project] (Unpublished)

Mechanical properties of composite panel from coconut husk, kenaf fiber and fiberglass - an alternative for furniture material / Nor Izzati Mohd Ali. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Beetle bliss / Nazeem Shahiry Mohd Ayub. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 34. ISBN 9789672948254

Hejmen armchair / Nazeem Shahiry Mohd Ayub. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 32. ISBN 9789672948254

I-Systech Sdh Bhd / Mohd Khairul Mohd Azmi ... [et al.]. (2003) [Entrepreneurship Project] (Unpublished)

Multipurpose frame storage from wooden pallet (pinus radiata) / Mohd Fais Mohd Faizu. (2019) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium and rice husks / Siti Sarah Mohd Ghani. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from acacia mangium spp. / Mohamad Amir Sabirin Mohd Nasir. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Console table KARALANG (Sebilan & Karakusa) / Nur Fatin Nazihah Mohd Nazrin. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 77. ISBN 9789672948254

Mechanical properties of kedondong, meranti and mersawa effected by boiling treatments / Faridwajdi Mohd Noh. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Crystalchair: arm chair / Nasrul Hakim Mohd Noor. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 220. ISBN 9789672948254

Potential bamboo side table with 60 degrees of curvature leg in furniture industries / Nurul Fahana Mohd Noor. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Cactus: wing chair / Nurfaizah Mohd Radzi. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 214. ISBN 978-967-2948-25-4 (Submitted)

Console table made of wood off-cuts from Neolamarckia cadamba (Kelempayan) / Nurul Filzah Mohd Rahim. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Inspired lounge david grass chair using plywood / Muhamad Shahrul Elmie Mohd Sabri. (2020) [Student Project] (Unpublished)

Demand on sofa design / Latifah Mohd Said. (2011) [Student Project] (Unpublished)

Coastal curve / Syamilah Atikah Mohd Salihin. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 42. ISBN 9789672948254

Performances of nitrocellulose lacquer and acid catalyst lacquer on giam (Hopea spp.) / Izzattie Mohd Saluji. (2019) [Student Project] (Unpublished)

Technology Entrepreneurship (ENT600) : Steelcase Inc / Anis Safiyah Mohd Sani. (2021) [Entrepreneurship Project] (Unpublished)

Productivity improvements in metal furniture industry / Norazira Mohd Sayuti. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Empirical Innovation Co. / Nur Zalikha Mohd Shahbuddin … [et al.]. (2022) [Entrepreneurship Project] (Unpublished)

Design and fabrication of side table / Amir Muttaqin Mohd Taheh. (2020) [Student Project] (Unpublished)

Effects of varying resin content and wood species on particleboard properties / Nor Faizura Mohd Yassin …[et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Adhesion of finishing material: Influence of timber species and coating layers / Mohamad Alif Mohd Yazied and Amran Shafie. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Finishing properties of Japanese table by using Kelempayan (neolamarckia cadamba) / Suraya Mohd Yusof. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Serene manta armchair / Nur Zulaikha Mohd Zahiruddin. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 48. ISBN 9789672948254

Influence of different types of house design towards preferences for space saving furniture in Bandar Tun Abdul Razak / Muhammad Arash Muttaqin Mohd Zamri. (2019) [Student Project] (Unpublished)

Drate Enterprise : Dropplate / Nur Arif Daniel Mohd Zamri ... [et al.]. (2018) [Entrepreneurship Project] (Unpublished)

Smart coffee table from wooden pallet / Muhamad Aminuddin Mokhtar. (2020) [Student Project] (Unpublished)

Bending strength of finger joint from neomalarkia cadamba and sappium baccatum/ Nik Amirul Fadzil Mokhtar. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Bending strength of finger joint from kelempayan (neomalarkia cadamba) and ludai (sapium baccatum) / Nik Amirul Fadzil Mokhtar and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Butterfly inspired foldable table / Nurul Manisa Muhamad Saupi. (2019) [Student Project] (Unpublished)

Multipurpose study table / Hanis Madihah Musa … [et al.]. (2022) In: Virtual-Melaka International Intellectual Exposition 2022 (VMIIEX 22). Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, pp. 171-173. ISBN 978-967-2846-04-8 (Submitted)

Fully jointed rack without the use of fasteners / Muhammad Faizal Musa. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The implementation of 5s for improving organization in UiTM furniture workshop / Imran Mustapa. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

N

Strength properties of sandwich composite made from plywood as skins and corrugated paper board as core / Nur Atiqah Najib. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Topio chair / Naqasya Narol Al Padil. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 27. ISBN 9789672948254

Japanese moku-zogan technique: bunga padi inlaid console table / Muhammad Dzarif Imran Nasir. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 55. ISBN 9789672948254

Kejora - nipa palm midrib sticks entwined geometric floor lamp / Muhammad Dzarif Imran Nasir. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 54. ISBN 9789672948254

Adjustable coffee table by using wooden pallet (pinus radiata) / Siti Nurul Afeeda Nazeree. (2017) [Student Project] (Unpublished)

ORCA: lounge chair / Nur Sabrina Nazlee. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 224. ISBN 978-967-2948-25-4 (Submitted)

Canting / Muhammad Nizar Dzulkarnain Nizar Azmir. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 57. ISBN 9789672948254

Lipat / Muhammad Nizar Dzulkarnain Nizar Azmir. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 56. ISBN 9789672948254

Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Unique design of study table / Aznan Hakim Ahmad Nor Muhiddin. (2020) [Student Project] (Unpublished)

Developing environmentally friendly furniture through life cycle analysis / Kamarulzaman Nordin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Kelarai pattern with moku zogan technique / Nurul Najeeha Nordin. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 81. ISBN 9789672948254

O

Puzzle storage chair: Multifunction furniture / Alias Omar, Norashikin Kamarudin and Nur Aza Farahin Amirruddin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multipurpose book rack using blockboard / Aidasuzana Othman. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Kajian perbandingan penggunaan tembaga dan perak dalam penghasilan pasu bunga (Vase) / Mohamad Faisal Othman. (2001) Degree thesis, thesis, Universiti Teknologi MARA, Kelantan. Physical copy is available on shelf

Astral: arm chair / Mohd Ayatullah Othman. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 210. ISBN 9789672948254

Xsibox (Extended Side Table With Storage) / Muhammad Zubair Othman. (2019) [Student Project] (Unpublished)

Physical and mechanical properties of gypsum-paper sludge board in furniture application / Norazleen Othman. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical and physical properties of gypsum-paper sludge board / Norazleen Othman and Siti Noorbaini Sarmin. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

P

Relationships between design and materials: mini showcase cabinet / Dora Paul Sajep. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Case Study : Husmat Furniture / Faridah Pauzi. (2021) [Entrepreneurship Project] (Unpublished)

The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip …[et al.]. (2015) In: UNSPECIFIED.

The prospect of oil palm trunk for manufacturing laminated veneer lumber (LVL) / Ahmad Fauzi Puasa and Hashim W Samsi. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 39-55. ISSN 0128-5599

R

Eco board / Noorhafizah Rasid ... [et al.]. (2019) In: Academic Intellectual International Invention, Innovation & Design Book. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 160. ISBN 9789670314716

Finishing properties of Japanese table from (neolamarckia cadamba) / Athirah Razak. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Hopper’s armchair / Noramira Syakira Razali. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Universiti Teknologi MARA, Kedah, p. 14. ISBN 9789672948254

Properties of particleboard from acacia species using different resin content and board density / Nur Amalina Razali. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Hanging hydroponic / Nur Aliah Nabilah Ridzuan. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 39. ISBN 9789672948254

Honey fushion / Nur Aliah Nabilah Ridzuan. (2024) In: MINDAREKA CCA 2024. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 40. ISBN 9789672948254

Leaf Chaise Lounge Chair: chaise lounge chair / Nurul Syafinaz Rosaidi Amir. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 170. ISBN 9789672948254

HnyComb: armchair / Muhammad Afendi Roslan. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, Kedah, p. 162. ISBN 9789672948254

Scallopchair: occasional chair / Muhammad Rusyaidy Rosli. (2022) In: MINDAREKA HYBRID 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 222. ISBN 978-967-2948-25-4 (Submitted)

Design of octagon shape coffee table/ Muhammad Syazwan Rosli. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Ergonomic chair design for musculoskeletal disorder (MSD) / Norhafizah Rosman … [et al.]. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni , UiTM Cawangan Pahang.

Ergonomic workstation design for science laboratory / Norhafizah Rosman … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

S

Purnama: wau bulan in wood appreciation / Nurul Syafiqa Said. (2024) In: MINDAREKA CCA 2024 : Visual Abstract Book. College of Creative Arts, Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 61. ISBN 9789672948254

Coffee table from combination materials: metal and glass / Shahafini Saidi. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Technology EntrepreneurshipTechnology (ENT600) : Secret Lab.CO / Faridatul Wahida Saini. (2021) [Entrepreneurship Project] (Unpublished)

Coffee table from round bamboo (Gigantochloa scortechinii) / Nurhanisah Salin. (2019) [Student Project] (Unpublished)

Shark spade: arm chair / Amirul Hafiz Samsuri. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 228. ISBN 9789672948254

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core / Syed Muhammad Azlan Sayed Idrus. (2013) [Student Project] (Unpublished)

Folding table and bench for outdoor use / Noor Azreen Seni. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Strength properties of t-shaped joint members using kelempayan wood/ Asnawi Seraila. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Strength properties of t-shaped joint members from kelempayan wood / Asnawi Seraila and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Hibiscus: round lounge chair / Siti Nur Alya Hafizah Shamsudin. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 206. ISBN 9789672948254

Cacooney / Husnie Shahriza Shari … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 105. (Submitted)

Customer decision making and quality dimensions for fixed furniture / Zurwina Sharkawi. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Versatiles kitchen cabinet / Shafeina Hatieqa Sofean. (2020) [Entrepreneurship Project] (Unpublished)

T

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Laundry strorage from pine wood / Muhammad Rifaie Thihaly. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

V

Sustainable furniture design in Malaysia : perceptions and challenges / Shabboo Valipoor. (2011) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

W

Laminated bamboo: alternative material of the future / Razak Wahab … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Lead time management for furniture manufacturing/ Wan Fadlina Wan Chik Ahmad. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Case study: Lead time management in furniture manufacturing / Wan Fadlina Wan Chik Ahmad and Norhafizah Rosman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of hybrid particleboard from acacia mangium and petai belalang using phenol formaldehyde resins / Wan Hazwani Wan Hassan, Jamaludin Kasim and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multifunctional storage with table and chair/ Wan Muhammad Hilmi Wan Ibrahim. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Multifunctional storage with table and chair / Wan Muhammad Hilmi Wan Ibrahim, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of hybrid particleboard from acacia mangium and oil palm trunk / Wan Jamalludin Wan Omar, Jamaludin Kasim and Zaimatul Aqmar Abdullah. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Y

The display kitchen ware rack furniture (finishing and coating) / Noor Azlina Yaacub. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Low cost multi-functional side table / Muhammad Fakhrur Radzi Yahani. (2020) [Student Project] Physical copy is available on shelf (Unpublished)

Business Model Canvas : Easy Sdn Bhd / Nurul Anies Suraya Young Rockie. (2020) [Entrepreneurship Project] (Unpublished)

Anthropometer chair-a good ergonomic design for elementary school students / Hanani Yuhaniz … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 152. (Submitted)

Sitting anthropometries of primary school children in the rural and urban areas in Pahang / Hanani Yuhaniz …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Chombee: high chair / Nur Asyifa Yuhezri. (2022) In: Mindareka Hybrid 2022: Programme Book. College of Creative Arts, Universiti Teknologi MARA Kedah Branch, p. 208. ISBN 9789672948254

Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Blueprint : Dorora Sdn Bhd “Rotatable Shoe Rack” / Nur Amirah Yusop. (2020) [Entrepreneurship Project] (Unpublished)

The effect of screw types on the holding strength of commercial 15mm and 18mm medium density fiberboard (MDF) / Muhammad Hariz Isyraf Yuszaini. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Z

Statistical quality control in metal based furniture industry / Nor Faeza Za'abah. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Hocomb coffee table / Danish Irhammi Zaidi. (2019) [Student Project] (Unpublished)

Demand on dining table in Courts Mammoth Temerloh/ Fitri Yazid Zainal. (2011) [Student Project] (Unpublished)

Physical and mechanical properties of three layer particleboard from oil palm frond / Norfazlina Zainal, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Design of multifunction bench and picnic table/ Muhammad Khalaf Zakaria. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Application of finishing system to multipurpose rack from Kelepayan species / Norhidayu Zakariya. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Blueprint : Tilted Desk / Marhaini Zamri. (2020) [Entrepreneurship Project] (Unpublished)

This list was generated on Thu Nov 21 14:43:15 2024 UTC.