Items where Subject is "Chemical engineering"

Article

Effect of aquilaria malaccensis after undergoes vacuum far-infrared radiation drying: article / Mohammmad Nur Hazrul A Hamid, Habsah Alwi. (2017) pp. 1-6.

CMC- Banana Flour film: production & characterization: article / Arina Izzati Ab Rahman and Fariza Hamidon. (2019) pp. 1-5.

Quantitative risk analysis on an FSO crude oil storage tank / Siti Rafidah Ab Rashi and Adil Rahman Nor Azmi. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (1). pp. 29-34. ISSN 2682-8588

Safety and health assessment of corrosion inhibitors using an index-based methodology / Siti Rafidah Ab Rashid, Mohamad Khairul Anwar Mohamad Rasidin and Nor Roslina Rosli. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (1): 4. pp. 22-29. ISSN 2600-8238

Effect of crude palm oil, Aloe vera, glycerol, and starch on characteristics and mechanical properties of polyethylene film / Siti Fatma Abd Karim … [et al.]. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (1). pp. 16-24. ISSN 2682-8588

Substituent effect on corrosion inhibition of Schiff bases derived from isatin / Aliyin Abdul Ghani … [et al.]. (2016) Scientific Research Journal, 13 (1). pp. 2-14. ISSN 1675-7009

Fabrication of Molybdenum (IV) Sulfide – Zeolitic Imidazole Framework-8 (MOS2 – ZIF-8) membranes supported onto alumina substrates for dye treatment in wastewater: article / Siti Mastura Abdul Rahman. (2019) pp. 1-9.

Physicochemical and adsorption properties of guava leaves-activated carbon by hydrochloric acid on adsorption of methylene blue / Mohd Fauzi Abdullah and Nur Fazilah Othman. (2023) Scientific Research Journal, 20 (1): 3. pp. 33-49. ISSN 2289-649X

Effect of magnetic graphene oxide on the demulsification process of heavy oil emulsion: article / Nurfarahain Abu Bakar. (2019) pp. 1-5.

Design and evaluation of the production of 50,000 metric tonnes/year of methanol using pre-combustion carbon capture technology / Mohd Aizad Ahmad, Nur Afiffah Ahmad Raof and Zulkifli Abdul Rashid. (2018) Malaysian Journal of Chemical Engineering and Technology (MJCET), 1. pp. 38-44. ISSN 2682-8588

Colorimetric-based concentration measurement of manganese ions using spectroscopy approach / Nurul Hidayah Ali, Mohamed Syazwan Osman, Fatin Izyani Mohamad Robi, Mohd Rumaizan Maidan Dali, Mohamad Faizal Abd Rahman. (2023) Scientific Research Journal, 20 (1): 5. pp. 89-105. ISSN 2289-649X

Treatment of aging leachate using biochar from tapioca skin: article / Fatin Afiqah Alias and Prof. Madya Dr. Kamariah Noor Ismail. pp. 1-7.

Characterisation of liquid oil from pyrolysis of waste tyre / Rusmi Alias and Atiqah Mohd Rafee. (2020) Malaysian Journal of Chemical Engineering and Technology (MJCET), 3 (1). pp. 62-68. ISSN 2682-8588

X Brown Field Sand Management: acoustic sand monitoring: article / Abdul Afiq Alim Pandita and Dr Erfan Mohammadian. (2016) pp. 1-6.

Polymerizarization of Lactide to PLA: effect of reaction temperature: article / Amira Amiza Aminudin, Norliza Ibrahim and Amira Nadzirah Suhaidi. (2019) pp. 1-6.

Identifying uniform corrosion of carbon steel using electrochemical noise measurement / Shirley Arvilla Andrew, Khaidzir Hamzah and Tammie Christy Saibin. (2017) Borneo Akademika, 2 (1). pp. 8-17. ISSN 2462-1641

Indirect plant-based surfactant impregnated activated carbon for adsorption: article / Nadzarul Azwan Azhari and Siti Wahidah Puasa. (2017) pp. 1-5.

The feasibility study on Clean Development Mechanism (CDM) in Malaysia: article / Aisyah Nur Addia Azizan and Syafiza Abd Hashib. (2018) pp. 1-7.

Parametric study on source rock potential of West Crocker Formation, onshore Sarawak: article / Muhammad Qayyum Azman, Nur Shuhadah Japperi and Norsyazwani Abdul Jalil. (2019) pp. 1-4.

Antibacterial activity and phytochemical screening of erythrina fusca lour. leaf extract (fabaceae) / Adiez Sapura Azmi ... [et al.]. (2022) Science Letters (ScL), 16 (1): 12. pp. 60-71. ISSN (eISSN): 2682-8626

Evaluation of the effects of Kaolinite on the efficiency of oil recovery by radioactive-assisted low salinity waterflood: article / Danial Azim Che Aziz ...[et al.]. (2019) pp. 1-7.

Identification and quantitative analysis of rice aroma compounds in black jasmine and Sung-yod Korat rice from Nakhon-Ratchasima province, Thailand / Vanida Choomuenwai. (2017) ESTEEM Academic Journal, 13 (SI). pp. 83-90. ISSN 1675-7939

A review on the assessment of plasticiser leaching from polyvinyl chloride and its prevention methods / Siti Nor Din, Aula Aqila Yusrizal, Dalina Samsudin and Faiezah Hashim. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (1): 1. pp. 1-8. ISSN 2682-8588

Synthesis of urea calcium phosphate via ball milling technique: article / Nur Fairuzza Syahiera Fauzi and Atikah Kadri. (2019) pp. 1-5.

Improving the photostabilization of poly(vinyl chloride) using 4-(benzylideneamino) benzenesulfonamide tin complex / Hassan Ghani ...[et al.]. (2022) Science Letters (ScL), 16 (1): 26. pp. 23-30. ISSN (eISSN): 2682-8626

A study on permeability of soil cement / Panbarasi Govindasamy and Felix Ling Ngee Leh. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 39-49. ISSN 0128-5599

An overview of activated carbon preparation from various precursors / Nur Deana Hasdi, Normadyzah Ahmad, Muhammad Khairil Ahya, Siti Wahidah Puasa. (2023) Scientific Research Journal, 20 (1): 4. pp. 51-87. ISSN 2289-649X

On the historical role of chemical engineers in sustainability transition / Masayuki Horio. (2019) Malaysian Journal of Chemical Engineering and Technology (MJCET), 2. pp. 41-56. ISSN 2682-8588

Cetrimonium surfactants with biologically active counter ions as self-immolative drug delivery systems / Syed Waqar Hussain Shah, Iram Bibi and Sabat Yousaf. (2022) Science Letters (ScL), 16 (1): 15. pp. 31-45. ISSN (eISSN): 2682-8626

Potential of banana peels and sugarcane bagasse as lost circulation material additive in drilling mud application: article / Norizzatul Akmal Ismail @ Azhar and Siti Khatijah Jamaludin. (2017) pp. 1-6.

Simulation of anti-reflective TiO2/SiO2 coating for silicon photovoltaic application by ray tracing / Imran Al-Haqeem Jaffar, Siti Hajar Mohmad Salleh, Mohd Zaki Mohd Yusoff. (2023) Scientific Research Journal, 20 (1): 1. pp. 1-11. ISSN 2289-649X

Effect of chemical treatment on physical and mechanical properties of coir fibre-polypropylene composites / Redzuan Mohammad Suffian James, Judith Gisip, Norwahyuni Mohd Yusof. (2023) Scientific Research Journal, 20 (1): 8. pp. 145-157. ISSN 2289-649X

Study of stereochemical effect of galactoside mixture based on reaction time / Nurul Fadhilah Kamalul Aripin, Mohamad Iqbal Ab Doroh and Marina Yusoff. (2018) Malaysian Journal of Chemical Engineering and Technology (MJCET), 1. pp. 65-67. ISSN 2682-8588

Removal of manganese ion using integral membrane incorporated with rice husk ash / Norin Zamiah Kassim Shaari, Nabilah Huda Alias, Nurul Ati. (2023) Scientific Research Journal, 20 (1): 7. pp. 125-143. ISSN 2289-649X

Effect of thickness of porous polysulfone membranes on removal of ferum ions / Norin Zamiah Kassim Shaari, Nabilla Mohamed Zaimy and Nurul Aida Sulaiman. (2018) Malaysian Journal of Chemical Engineering and Technology (MJCET), 1. pp. 51-55. ISSN 2682-8588

Fabrication of polysulfone/chitosan composite membrane with various concentrations of polysulfone / Norin Zamiah Kassim Shaari, Mohammad Najib Mohmad Ishak and Nurul Aida Sulaiman. (2019) Malaysian Journal of Chemical Engineering and Technology (MJCET), 2. pp. 13-20. ISSN 2682-8588

Effect of particle size, shape, and weight percentage of hydroxyapatite (HA) on rheological behaviour of polycaprolactone/hydroxyapatite (PCL/HA) composites / Zulaisyah Laja Besar and Suffiyana Akhbar. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 5. pp. 132-136. ISSN (e-ISSN): 2682-8588

Optical properties of cerium oxide doped zinc borotellurite glass / Hasnimulyati Laoding, Halimah Mohamed Kamari, Azuraida Amat, Azianty Saroni. (2023) Scientific Research Journal, 20 (1): 2. pp. 13-32. ISSN 2289-649X

A manifestation of non-hydrodynamic factors in steady-state conditions of friction / Tareq M.A. Al-quraan. (2017) Journal of Mechanical Engineering (JMechE), 14 (2). pp. 109-124. ISSN 1823-5514 ; 2550-164X

2D-silica ring interactions with alpha olefin sulphonate (AOS) surfactant under AOS/water system using molecular dynamic simulation / Nik Salwani Md Azmi... [et al.]. (2019) Malaysian Journal of Chemical Engineering and Technology (MJCET), 2. pp. 1-7. ISSN 2682-8588

Pb2+ Removal by Using Activated Coconut Waste Modified with Different Metal Oxide Nanoparticles. (2022) ESTEEM Academic Journal, 18. pp. 1-10. ISSN 1675-7939

Synthesis of GO-ZnO via impregnation method for fluoride removal in wastewater / Mohamad Hanafi Mohamad Rosli, Nurulhuda Amri and Norhusna Mohamad Nor. (2019) ESTEEM Academic Journal, 15. pp. 35-43. ISSN 2289-4934

Kinetics analysis on isothermal torrefaction of sawdust in a fixed-bed reactor using the Coats-Redfern method and functional group analysis using FTIR spectroscopy / Alina Rahayu Mohamed, Noor Hasyierah Mohd Salleh and Nur Nadhirah Nordin. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (1): 3. pp. 17-21. ISSN 2682-8588

Sodium hydroxide/silane treated kenaf fibre in unsaturated polyester matrix: effects of fibres length and fibres loading towards the composites flexural and morphological properties / Muhammad Mustakim Mohd Ghaztar, Nik Noor Idayu Nik Ibrahim and Ahmad Zafir Romli. (2022) Journal of Mechanical Engineering (JMechE), 19 (2): 21. pp. 147-168. ISSN (eISSN): 2550-164X

A study of different heat effects on the processing of raw milk to drinking milk for commercialization: article / Siti Nur Hamraa Mohd Isa and Siti Noor Suzila Maqsood Ul- Haque. (2017) pp. 1-16.

The efficiency of long primers compared to the short primer for RAPD technique in date palm / Aisyah Mohd Ismail and Farida Zuraina Mohd. (2022) Science Letters (ScL), 16 (1): 11. pp. 1-11. ISSN (eISSN): 2682-8626

Determination of biodiesel amount in various biodiesel-diesel blends / Siti Norhafiza Mohd Khazaai … [et al.]. (2020) Gading Journal of Science and Technology, 3 (2). pp. 14-19. ISSN (e-ISSN) : 2637-0018

Integration of Statistical Process Control (SPC) and Engineering Process Control (EPC) for quality improvement: article / Fatin Fazliyana Mohd Latif, Sherif Abdulbari Ali and Nur Amalina Hamzah. (2019) pp. 1-3.

Effect on the performance test towards flow controller and level controller using Zieglar Nichols tuning rule: article / Nurhafizah Mohd Safie and Abdul Aziz Ishak. (2018) pp. 1-5.

The optimization of LNG dehydration process: article / Muhammad Hazim Mohd Shafie and Effah Yahya. (2018) pp. 1-5. (In Press)

Evaluation of crosslinking degree on the characteristics and performance of membranes formulated from quaternized chitosan / Abdul Aziz Mohd. Nasir, Norin Zamiah Kassim Shaari, Nur Syazwanie Izzati Chik. (2023) Scientific Research Journal, 20 (1): 6. pp. 107-123. ISSN 2289-649X

A study on the relationship between correlation coefficient and inverse regression / Ng Set Foong and Teoh Sian Hoon. (2005) ESTEEM Academic Journal, 2. pp. 45-54. ISSN 1675-7939

Population dynamics and biodiversity during spontaneous fermentation of Garcinia mangostana pericarps / Mohamad Sufian So’aib and Nik Abdul Hafiidz Nik Abdul Malek. (2018) Malaysian Journal of Chemical Engineering and Technology (MJCET), 1. pp. 14-21. ISSN 2682-8588

The effect of evaporator basin nanocrystalline coating on solar still efficiency / Nik Rozlin Nik Mohd Masdek, Zainal Abidin Kamarul Baharin and Nurul Anis Fadhilah Adam. (2024) Journal of Mechanical Engineering (JMechE), 13 (1): 15. pp. 271-281. ISSN 1823-5514 ; 2550-164X

Agglomeration mechanism during biomass carbonization in fluidized bed / Chihiro Ohashi ... [et al.]. (2015) Esteem Academic Journal, 11 (1). pp. 35-43. ISSN 1675-7939

Kinetic study of metal ions adsorption by immobilised chitosan / Thanabalan Pitchay ...[et al.]. (2022) Science Letters (ScL), 16 (1): 12. pp. 137-148. ISSN (eISSN): 2682-8626

Effect of soil buried to mechanical properties of Kenaf fibre reinforced thermoplastic polyurethane composites: article / Muhammad Fahmi Aizat Razali and Noor Fitrah Abu Bakar. (2017) pp. 1-6.

Effect of Pebax coating on gas separation properties of rGO-ZIF-8 pes mixed matrix membranes: article / Haldizam Saidi ... [et al.]. (2019) pp. 1-8.

Development and potential applications of gelatine, honey, and cellulose electrospun nanofibres as a green polymer / Nurul Haiza Sapiee, Nurul Atiqah Izzati Zulkifly and Noor Fitrah Abu Bakar. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 13. pp. 90-102. ISSN (e-ISSN): 2682-8588

Prediction of dissolution behavior of carbamazepine-saccharin co-crystal using molecular modelling technique: article / Nur Shahida Shahidan…[et al.]. (2019) pp. 1-7.

Recovery of cenosphere from fly ash: article / Nur Ain Sumari and Christina Vargis. (2017) pp. 1-4.

Single factor optimisation of ultrasonic-assisted extraction for recovery of phenolic compounds and its antioxidant activity using one factor analysis / Wan Nor Sofiana Wan Ghazali, Sarmilaah Dewi Subramaniam, Sureena Abdullah and Nurul Aini Mohd Azman. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (1): 2. pp. 9-16. ISSN 2682-8588

Researcher Profiles : Faculty of Chemical Engineering. (2022)

Inhibitory effect of oral thin films (OTFs) containing xylitol against streptococcus mutans / Elizabeth Teng Yi Ern, Hee Xixian and Muhamad Fareez Ismail. (2022) Science Letters (ScL), 16 (1): 13. pp. 124-136. ISSN (eISSN): 2682-8626

Vibration induced fatigue failure prediction in process pipework: article / Norshahanis Zamahsari and Mohd Fazril Irfan Ahmad Fuad. (2018) pp. 1-7.

Chromatographic profiling of ziziphus mauritiana lam. extracts for phytochemical characterization / Nurul Adlina Nadhirah Zamani, Ibtisam Abdul Wahab and Hannis Fadzillah Mohsin. (2024) International Journal of Pharmaceuticals, Nutraceuticals and Cosmetic Science (IJPNaCS), 7 (1). pp. 32-42. ISSN 2682-8146

Characterization of cellulose from microwave extracted mesocarp fibre: article / Nur Illya Aqinnah Zulkefli. (2018) pp. 1-4.

The effect of milling time in production of urea compound by ball milling technique: article / Syasya Zulkipli and Dr. Atikah Kadri. (2018) pp. 1-4.

The comparison of antioxidant and bioactive compound in fresh pineapple and pineapple powder: article / Inun Hazwani khairuddin and Syafiza Abd Hashib. (2017) pp. 1-4.

Book Section

Study the effect of pMMA-seeded substrate to the znO nanostructures / Noor Aadila Abd Aziz … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 127. (Submitted)

Conductivity improvement of Cr doped AL2O3 materials / Nurhanna Batar @ Badar … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 132. (Submitted)

Surface properties and antimicrobial performance of copper coatings electrodeposited on 304 stainless steel / Nik Norziehana Che Isa. (2018) In: THE DOCTORAL RESEARCH ABSTRACTS. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

A novel Hydroxyapatite Coated Ti Mesh / Nik Norziehana Che Isa … [ et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Edible-based and non-toxic corrosion inhibitor / Hazlina Husin, Md. Amin Hashim and Izni Mariah Ibrahim. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 141. (Submitted)

Eco-friendly epoxide as green chemicals precursor / Mohd Jumain Jalil … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 97. (Submitted)

Pyrolytic oil synthesis via catalytic microwave assisted pyrolysis of automotive paint sludge by using ZSM-5 catalyst / Zakiuddin Januri. (2018) In: The Doctoral Research Abstracts. IGS Biannual Publication, 18 (18). Institute of Graduate Studies, UiTM, Shah Alam.

Cobalt poor and rich lixni1-ycoyo2 layered materials for li-ion battery application / Che Norlida Kamarulzaman, Kelimah Elong and Roshidah Rusdi. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 130. (Submitted)

Zn(1-x)CuxO and Zn(1-x)FexO and ZnO nanostructures for photovoltaic applications / Muhd Firdaus Kasim, Norlida Kamarulzaman and Roshidah Rusdi. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 131. (Submitted)

Modification of streoidal compounds by biotransformation as a green synthetic tool / Mohd Zaimi Mohd Noor … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 123. (Submitted)

Performance of PFA-Cement-Sand stabilized column in soft soil / Mohamad Shakri Mohmad Shariff. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Air-tight radon chamber for determination of supported radon concentration in water / Ahmad Saat, Nor Shalina Zainal and Zaini Hamzah. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 129. (Submitted)

Process optimization and characterization of nanostructured zinc oxide thin films for solar cell applications / Mohd Zainizan Sahdan. (2013) In: THE DOCTORAL RESEARCH ABSTRACTS. IPSis Biannual Publication, 3 (3). Institute of Graduate Studies, UiTM, Shah Alam.

Biodegradable polymer from terrestrial edible mushroom for Enhanced Oil Recovery (EOR) / Tengku Amran Tengku Mohd … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 95. (Submitted)

Properties of single and mixed species glulam from selected low-grade Malaysian timbers / Wan Hazira Wan Mohamad. (2018) In: The Doctoral Research Abstracts. IGS Biannual Publication, 14 . Institute of Graduate Studies, UiTM, Shah Alam.

Monograph

Petronas Refinery & Petrochemical Corporation Sdn. Bhd. (PRPC) / Nurin Svahirah Mohd Shafek. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

Conference or Workshop Item

Kinetic modelling of Dihydroxystearic Acid (DHSA) production from palm kernel oil-based oleic acid / Abdul Hakim Masu’ud Fathi and Siti Khatijah Jamaludin. (2020) In: UNSPECIFIED.

Regenerated kenaf core cellulose hydrogels and films prepared via pre-cooled method / Adam Khairul Faiz ... [et al.]. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021).

Effectiveness of chemical treatment of oil palm empty fruit bunch fiber as reinforcement in foamed mortar / Nur Nabilah Mohamad Bakhtiar and Md Azree Othuman Mydin. (2018) In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

Comparative study on phytochemical properties, antibacterial and antioxidant activities of different solvent extracts of twelve selected medicinal plants / Norsuhana Sapiee and Marlina Mohd Mydin. (2020) In: UNSPECIFIED.

Thesis

Effect of Aquilaria malaccensis after undergoes vacuum far-infrared radiation drying / Mohammad Nur Hazrul A Hamid. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sensitivity behavior of nano structured zinc oxide based gas sensor fabricated by immersion method / Siti Shafura A Karim. (2018) Masters thesis, thesis, Universiti Teknologi MARA.

Carboxylmethyl Cellulose (CMC)-Banana Flour film: production & characterization / Arina Izzati Ab Rahman. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Effects of chemical interesterification and fractionation on the physicochemical properties and crystallisation kinetics of palm stearin and palm kernel olein blends / Norizzah Abd. Rashid. (2005) PhD thesis, thesis, Universiti Teknologi MARA.

Histamine content in surimi stored at different temperatures / Azra Abdul Halim. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Population dynamics and molecular profiling of microbial ecosystems during spontaneous fermentation of Carica Papaya leaves / Fatim Nur Syuhada Abdul Rahman. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Degradation of orange II dye using perovskite compounds with molybdenum ion as active phase / Nadhratul Nur Ain Abdul Rahman. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Investigation on the effect of infiltration parameters to the mechanical performance of biomorphic silicon carbide / Noor Leha Abdul Rahman. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Design and fabrication of activated carbon based of natural gas vehicle container / Roazian @ Roezwan Abdul Rahman. (2002) Degree thesis, thesis, Universiti Teknologi MARA.

Fabrication of Molybdenum (IV) Sulfide – Zeolitic Imidazole Framework-8 (MOS2 – ZIF-8) membranes supported onto alumina substrates for dye treatment in wastewater / Siti Mastura Abdul Rahman. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fabrication and characterization of graded index nanostructured Ti02 compact layers for dye-sensitized solar cell / Mohd Hanapiah Abdullah. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Effect of magnetic graphene oxide on the demulsification process of heavy oil emulsion / Nurfarahain Abu Bakar. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Characterization of surface layer development on duplex stainless steel resulting from thermochemical hybrid treatment / Mohd Shahriman Adenan. (2015) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Oxygen sensing behaviors of Eu (Ba1-xPrx)2Cu3O7-δ and Eu1-yPrBa2Cu3O7-δ ceramic rods with hot-spot / Ikhwan Adzam. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Quantitative risk and economic loss risk assessment for pressure variation on methanol production / Mohd Aizad Ahmad. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Development of body armour systems utilising natural rubber coated fabrics / Mohd Rozi Ahmad. (2008) PhD thesis, thesis, Universiti Teknologi MARA.

Optimization of hydrolysis conditions for the production of shrimp hydrolysate by using protamex: effect of enzyme substrate (ES) ratio and time / Nurul Nadiah Ahmad Latif. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Boiler incidents in process industry sequence analysis / Liyana Ahmad Shuib. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Development and characterization of porous polycaprolactone/hydroxyapatite (PCL/HA) composite using supercritical carbon dioxide foaming process / Suffiyana Akhbar. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Treatment of aging leachate using biochar from tapioca skin / Fatin Afiqah Alias. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Epoxidation of waste cooking oil-based palm oil via Prileschajew reaction / Danial Nuruddin Azlan Raofuddin. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Biorecovery of silver from simulated silver electroplating wastewater using phenolic compounds extracted from oil palm (Elaeis guineensis) leaves / Ahmad Arif Azmi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Evaluation of the effects of Kaolinite on the efficiency of oil recovery by radioactive-assisted low salinity waterflood / Danial Azim Che Aziz. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Integration of polyvinyl alcohol (PVA) thin film with zinc-cyclen casted over polyethersulfone (PES) support membrane for carbon dioxide separation performance / Nursyuhani Che Husain. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Studies on the syntheses of some nitrogen heterocycles with a pyrrolidine ring system / Zurina Shaameri. (2007) PhD thesis, thesis, Universiti Teknologi MARA.

V2Os deNOx catalyst development For NOx reduction in the solid waste combustion flue gas / Kamariah Noor Ismail. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

Bio-modified multiwalled carbon nanotubes coated with doxorubicin CNT- PEG2000 - NH2 / DOX for in vitro neuroblastoma cells toxicity study / Nurulhuda Ismail. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Potential of banana peels and sugarcane bagasse as lost circulation material additive in drilling mud application / Norizzatul Akmal Ismail @ Azhar. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Pyrolytic oil synthesis via catalytic microwave assisted pyrolysis of automotive paint sludge by using ZSM-5 catalyst / Zakiuddin Januri. (2017) PhD thesis, thesis, Universiti Teknologi MARA.

Characterization of PA6 -HDPE nanocomposite with presence of compatibilizer / Syahrul Anam Khalid @ Khalib. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Powder injection moulding of synthesized hydroxyapatite powder from clamshell / Nurul Huda M. Ali. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Synthesis and characterization of oven-dried oil palm empty fruit bunch - based xerogels for absorption of engine oil / Nik Muhammad Faisal Mat Yasin. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

The removal of carbon dioxide by using modified carbonized oil palm shell in fixed bed column / Amalina Md Dali. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

A study on the effects of sintering temperature on the densification of alumina / Mohd Muslim Md. Isa. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Synthesis and characterization of visible light active photocatalysts by solgel method / Elvana Nerissa Mohamad. (2015) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on co-crystal formation of ibuprofen and glutaric acid via slow cooling technique / Noradila Mohamed Hanapi. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Evaluation of umami taste on pigeon pea (Cajanus cajan) hydrolysate produced using flavourzyme / Nor Marhida Mohamed Razal. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

Effect on the performance test towards flow controller and level controller using Zieglar Nichols tuning rule / Nurhafizah Mohd Safie. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Dissolution of barium sulfate scale using ethylenediaminetetraacetic acid (EDTA) / Izzati Syahirah Mohd Salikin. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The optimization of LNG dehydration process / Muhammad Hazim Mohd Shafie. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Performance of PFA-Cement-Sand stabilized column in soft soil / Mohamad Shakri Mohmad Shariff. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Biosorption efficiency of FE(II), CU(II), PB(II) and ZN(II) from aqueous solution by living Pleurotus ostreatus / Arbanah Muhammad. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Modeling and simulation of coffee bean process industry in Malaysia using Solidworks softmotion / Mohamad Khairee Muhsin. (2014) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Titanium dioxide and cobalt oxide as a catalyst in catalytic converter for 4-stroke motorcycle engine / Mohibah Musa. (2006) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Synthesis of Yttria-stabilized zirconia from local sands / Nur Fatinhanani Fatimah Norsham. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Development of a bioremediation process for decolourisation of textile wastewater / Khadijah Omar. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

Molecular dynamic simulations: prediction of dissolution of succinic acid crystal (form B) in ethanol solution / Mohammad Ammar Rajab. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Metal injection moulding of NiTi alloy from elemental powder of nickel and titanium using palm stearin based binder system / Rosliza Razali. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

Elucidation of the role of solvents on the growth of urea / Nurshahzanani Shahrir. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Effect of accelerated weathering on the strength properties of glulam produced from mengkulang timber treated with Light Organic Solvent Preservatives (LOSP) / Syarifah Hanisah Syed Mokhtarruddin. (2019) Masters thesis, thesis, Universiti Teknologi MARA.

Synthesis of chlorinated acrylate ester and incorporation effect on prevulcanised natural rubber latex properties / Wan Siti Hafizah Wan Mohd Azmi. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Oil spill treatment using adsorber from natural organic materials / Safari Zainal. (2005) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Photocatalytic activity of silver-doped titanium dioxide on methyl orange degradation: effect of pH / Muhammad Amirul Shafik Zainal Abidin. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sustaining drug release of chitosan spheroids produced by an extrusion-spheronization technique / Lidawati Zakaria. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Vibration induced fatigue failure prediction in process pipework / Norshahanis binti Zamahsari. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Catalytic co-pyrolysis of palm kernel shell and polypropylene using metal incorporated mesoporous zeolite for high-quality bio-oil / Aizatul Hikmah Zulkafli. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Characterization of cellulose from microwave extracted mesocarp fibre / Nur Illya Aqinnah Zulkefli. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Effect of milling time in production of urea compound by ball milling technique / Syasya Zulkipli. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The comparison of antioxidant and bioactive compound in fresh pineapple and pineapple powder / Inun Hazwani khairuddin. (2017) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Removal of Cr and Zn using AgNPs / TiO2 Nanocatalyst / Abdul Muhaimin Abd Jalil. (2020) [Student Project] (Unpublished)

Evaluation the performance of a two stage fiber filter system / Amin Huzaery Abd Razak. (2009) [Student Project] (Submitted)

Supercritical fluid extraction of Mariposa Christia Vespertillonis using carbon dioxide / Zulkifli Abdul Gani. (2017) [Student Project] (Unpublished)

Mechanical properties of tin slag filled polyester composites / Muhamad Rezza Abdul Manaf ... [et al.]. (2018) [Student Project] (Unpublished)

Investigative study of leachate degradation in soil from bottom ash as filling embankment in road pavement / Muhammad Azam Abdul Rahim. (2022) [Student Project] (Unpublished)

Production of biodiesel using waste cooking oil via transesterification process / Ahmad Hussairi Abdul Rahman. (2008) [Student Project] (Unpublished)

Optimization of AB Fertilizer for plant growth in fertigation using central composite design / Akmal Syazani Abdul Samad. [Student Project] (Unpublished)

Structural and optical characterization of porous zinc oxide (ZnO) grown on different substrates by ammonium hydroxide (NH4OH) solution / Nur Hazwani Abu. (2017) [Student Project] (Unpublished)

Synthesis of chitosan via biological deacetylation of chitin biopolymer / Nur Ain Ahmad Kamal. (2022) [Student Project] (Unpublished)

Adsorption of dyes from textile industry by using activated rice husk / Muhammad Shamier Ameerdeen. (2017) [Student Project] (Unpublished)

Extraction and stripping of Cu(ii) ions from real industrial efffluent by continous liquid membrane / Anne Mitchelle Asap. (2017) [Student Project]

Colloidal stability of gold nanoparticles in organic and aqueous media / Egbert Awel. (2017) [Student Project] (Unpublished)

Indirect plant-based surfactant impregnated activated carbon for adsorption / Nadzarul Azwan Azhari. (2017) [Student Project] (Unpublished)

Parametric investigation of the performance of gold nanoparticles augmented cellulosic microcapsules by alginate encapsulation for P-nitrphenol degradation / Siti Sarah Fadzil. (2017) [Student Project] (Unpublished)

Determination of cadmium, chromium and nickel of pond and marine prawn by using flame atomic absorption spectroscopy / Rohaya Fauzi. (2001) [Student Project] (Unpublished)

Evaluation of pollution level at different point sources of Sg. Kg. Pertama through physico-chemical properties using standard analytical method / Siti Nurruhaya Hadzifah. (2022) [Student Project] (Unpublished)

Electrocoagulation process for removal of emulsion oil using zinc electrode via response surface methodology / Izzah Syahida Hassha’ari. (2022) [Student Project] (Unpublished)

Optimization of Acid Orange 7 degradation in heterogeneous Fenton- like using Fe3-xCoxO4 catalyst / Martunis Zamzami Ibrahim. (2017) [Student Project] (Unpublished)

Extraction of Vernonia Cinerea via maceration method and its qualitative analysis / Muhammad Khalil Jali. (2017) [Student Project] (Unpublished)

Comparative study for optimized alkaline pretreatments for production of reducing sugar from various type of biomasses / Aini Nabilah Jamaludin. (2020) [Student Project] (Unpublished)

Properties of particle board from Bagasse (saccharum offlclnarum l) mix with unknown species of wood waste in relation to wood ratio and resin / Norsyazana Jasni. (2017) [Student Project] (Unpublished)

Characterization of gold nanoparticles augmented cellulosic microcapsules by alginate encapsulation method for p-nitrophenol degradation / Nurafadyla Jeman. (2017) [Student Project] (Unpublished)

Removal of nickel and iron from contaminated water by using magnetic separation / Nurulhuda Kassim. (2009) [Student Project] (Unpublished)

Implementation of DWSIM simulator and its effectiveness as alternative simulation software for chemical engineering students / Muhammad Azri Khashim. [Student Project] (Unpublished)

Evaluation the performance of two stage fiber filter system / Emmie Fadzreena Mahadi. (2009) [Student Project] (Submitted)

Oxidation-reduction potential (ORP) during microbial transformation processes under sewer conditions / Farizah Mahaya. (2004) [Student Project] (Submitted)

Extraction and identification of active compounds from Christia Vespertilionis extracts by selected extraction techniques / Noradawiyah Mahayuddin. (2017) [Student Project] (Unpublished)

Effect of solvent on percentages yields of condensed tannin in different types of tea (Camellia Sinensis) / Noor Fadlyana Mail. (2009) [Student Project] (Unpublished)

Deoxynucleotide triphosphates (dNTPs) concentration in polymerase chain reaction: effects on DNA amplification / Mohd Fahmi Mastuki. (2007) [Student Project] (Unpublished)

Prediction of ultrasonic pulse velocity (UPV) assessment on dried oil palm lumber quality / Mohamad Hazbullah Mat Ail. (2016) [Student Project] (Unpublished)

Optimizing the magnesium chloride concentration in a polymerase chain reaction / Sazaliza Mat Isa. (2007) [Student Project] (Unpublished)

Synergistic separation of Co (ii) and Ni (ii) from aqueous solutions by D2EHPA and TBP dissolved in waste vegetable oil / Farhan Shah Mohamad Johari. (2017) [Student Project] (Unpublished)

Synthesis of GO-ZnO via impregnation method for fluoride removal in wastewater / Mohamad Hanafi Mohamad Rosli. (2017) [Student Project] (Unpublished)

Natural convection solar dryer with biomass back up heater / Mohamed Yasser Mohamed Desa and Azriizwandy Abdul Kadir. (2003) [Student Project] (Unpublished)

Mechanical and physical properties of hybrid particleboard from bagasse and eucalyptus pellita / Muhammad Zikri Mohd Hashim. (2019) [Student Project] (Unpublished)

A study of different heat effects on the processing of raw milk to drinking milk for commercialization / Siti Nur Hamraa Mohd Isa. (2017) [Student Project] (Submitted)

A study on user acceptance of the iP timetrack at Petronas Carigali Sdn Bhd /Mohd Syahrizat Mohd Kamal. (2010) [Student Project] (Unpublished)

Optimization of supercritical fluid extraction for Mariposa Christia vespertillonis by using response surface methodology / Nurul Nadiah Mohd Nazri. (2017) [Student Project]

Effect of supercritical fluid extraction (SFE) parameters on antioxidant of hibiscus rosa sinensis leaves / Nur Riana Anis Mohd Razali. (2022) [Student Project] (Unpublished)

Biosorption of heavy metals in leachate by using coconut shell activated carbon as an adsorbent / Nabilah Adila Mohd Tajudin. (2017) [Student Project] (Unpublished)

Failure of adhesive or cohesive within oil palm veneer plywood bonded with selected resin / Nur Zakiah Mohd Yasin. (2016) [Student Project] (Unpublished)

Refining of industrial spent fuel oil by using desulfurization method: a review / Siti Nurfarhanah Mohd Zainal. (2022) [Student Project] (Unpublished)

Study of the effect of compatibilizer (Maleic Anhydride) on the LDPE/NR/oil palm fiber composite / Raudhatul Jannah Mohd Zuki. (2009) [Student Project] (Submitted)

Antimicrobial activity of biosynthesis silver nanoparticles from Christia Vespertilionis plant extract / Yusfariza Atiqa Mustapha. (2017) [Student Project]

Biodiesel from renewable based materials: methods of processing / Nur Amyra Syafiqah Norhisham. (2021) [Student Project] (Unpublished)

Effect of soil buried to mechanical properties of reinforced Kenaf core fibre in thermoplastic polyurethane composites / Muhammad Fahmi Aizat Razali. (2017) [Student Project] (Unpublished)

Effects of hot and cold condition on finishing properties of Mahang Gajah (macaranga gigantae) / Nur Liyana Izzati Rohaffin. (2016) [Student Project] (Unpublished)

Properties of aluminium oxide in nanofluids / Roslan A. ... [et al.]. (2018) [Student Project] (Unpublished)

Natural Gas Vehicle (NGV) / Roslan Said and Mohd Adami Muda. (2002) [Student Project] (Unpublished)

Chemical compositions of oil palm trunk at (elaeis guineensis) top and bottom portion / Muhamad Suhaimi Samat. (2016) [Student Project] (Unpublished)

Effect of processing parameter on chemical composition of cucurbita moschata extract / Nurul Najihah Satar, Aina Irdiana Mohd Yusmadi and Abdullah Ammar Abdul Halim. (2021) [Student Project] (Unpublished)

Recovery of cenosphere from fly ash / Nur Ain Sumari. (2017) [Student Project] (Submitted)

Supercritical Carbon Dioxide Extraction as a green technology for Chromolaena odorata leaves / Farahhanis Tuah. (2017) [Student Project] (Unpublished)

Optimization of supercritical fluid extraction of Mariposa Christia Vespertillonis leaves to produce antioxidant components using response surface methodology / Suzana Tukiman. (2017) [Student Project]

Performance test on copper (II) ions removal by using fabricated thin layer composite / Nur Yusrina Yahya. (2017) [Student Project] (Unpublished)

Extraction of methylene blue and crystal violet dye from aqueous solution using green organic solvent through solvent extraction system / Siti Aishah Yusuf. (2022) [Student Project] (Unpublished)

A study on impact of trust in supply chain management at PETRONAS Gas Berhad / Mohd Amin Zakaria. (2010) [Student Project] (Unpublished)

Coco simulator: a steady state flowsheet simulation environment / Muhammad Zimam Akid Mohd Haniffa. (2015) [Student Project] (Unpublished)

The influence of gradual cobalt substitution on the catalytic activity of Fe3-xC0xO4 catalyst / Anees Nurzalikha Zakarya. (2017) [Student Project] (Unpublished)

Bending properties of Mahang Gajah (macaranga gigantea) by using destructive and non-destructive testing / Nur Aini Zul Bakri. (2016) [Student Project] (Unpublished)

Recovery of Au(III) and Ag(II) from e-waste solution using green organic solvent through solvent extraction system / Zarif Hannan Zulkafli. (2022) [Student Project] (Unpublished)

Entrepreneurship Project

Arome Enterprise / Syarif Farhan Mohd Fauz...[et al.]. (2019) [Entrepreneurship Project] (Unpublished)

Styro Enterprise : Styronomo / Khabir Nabil Mohd Sa'id ... [et al.]. (2017) [Entrepreneurship Project] (Unpublished)

Research Reports

Optimization of Cu(ll) extraction from aqueous solutions using soybean oil-based organic solvent by response surface methodology / Chang Siu Hua and Teng Tjoon Tow. (2012) [Research Reports] (Unpublished)

Solvent swelling and pre-heating on sub-bituminous Malaysian coals - the effect on coal thermal stability and microstructure / Assoc. Prof. Dr. Hj. Khudzir Hj. Ismail and Mohd Azlan Mohd Ishak. (2006) [Research Reports] (Unpublished)

Synthesis and fourier transform infrared spectroscopic studies of C-O bond in the Nickel(II) benzoate derivatives substitued with electron-attracting groups / Zuraida Khusaimi and Azlin Sanusi. (2003) [Research Reports] (Unpublished)

Production of cellulose from agricultural waste using non-wood chemical pulping method / Leong Soo Kwan and Atikah Kadri. (2006) [Research Reports] (Unpublished)

Synthesis and kinetic model study of olefinic double bonds of palm oleic fatty acids derivatives via epoxidation / Mohd Saufi Md Zaini & Norkamruzita Saadon. (2020) [Research Reports] (Submitted)

Development of superplastic carburizing using duplex stainless steel / Nik Rozlin Nik Mohd Masdek and Rosnadiah Bahsan. (2009) [Research Reports] (Unpublished)

Development of hydrophilic Si02/Ti02 double layers coating for automotive glass application by low-cost dip coating method / Muhammad Zahiruddin Ramli, Nur Fadzeelah Abu Kassim and Nurulhuda Amri. (2011) [Research Reports] (Unpublished)

A preliminary study on understanding and attitude towards chemical labeling using Globally Harmonised System (GHS) for secondary level students in Terengganu / Sarifah Fauziah Syed Draman, Rusli Daik and Mohd Lazim Abdullah. (2011) [Research Reports] (Unpublished)

The substitution of wax with non-wax resist agent for hand drawn batik (extended to screen printing) / Wan Yunus Wan Ahmad, Jamil Salleh and Ponirin Amin. (2006) [Research Reports] (Unpublished)