Items where Subject is "Control engineering systems. Automatic machinery (General)"

Article

Abdul Hamid, Nor Hissham and Ismail, Mohd Fauzi and Khalit, Muhammad Ilham and Abdul Wahab, Abdul Malek and Adull Manan, Nor Fazli (2025) Improvement product design quality to reduce warranty cost in aftermarket sales for OEM’s customer. Journal of Mechanical Engineering (JMechE) , 22 (3) : 1 . pp. 1-15. ISSN e-ISSN: 2550-164X.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2017) Comparative Study of Non-Productive Tool Path Length for Contour Parallel Machining / Haslina Abdullah...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 3 (2) . pp. 211-220. ISSN 18235514.

Ahmad @ Ahmad Fauzi, Najwa Rawaida and Abu Thalib, Muhammad Zul Irfan and Zainal, Khabir Khusairi and Zulkhairi, Azad Azraei and Kamarudin, Ariq Aidiel and Mohamad Sha, Mohamad Syabil (2024) CASIC - children assistant system in car. pp. 1-5.

Frédéric, Etienne Kracht and Alex Armando, Roempler Dellien and Dieter, Schramm (2018) Validation of a suspension model and its elastic behaviour demonstrated at the formula student race car of the University Duisburg-Essen / Frédéric Etienne Kracht ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 7 (1) . pp. 35-57. ISSN 18235514.

Harman, Mamias (2013) Arduino-based faulty pilot cable detector and digital sampling oscilloscope: article / Mamias Harman. pp. 1-9.

Harun, Muhammad Syafiq (2014) Virtual light communication based traffic and road information broadcasting system: article. pp. 1-8.

Husaini Azlan, Muhammad Ridha (2023) Automated dish sorter using arduino. pp. 298-304.

Ibrahim, Dzullijah and Jamaludin, Muhamad Haziq and Ab Hamid Pahmi, Muhammad Arif and Yaakob, Yusli (2017) Improvement on the external transmission system of a single-seated open wheel vehicle / Dzullijah Ibrahim. ESTEEM Academic Journal , 13 (June) . pp. 133-145. ISSN 1675-7939.

Ibrahim, Mohd Fadhil (2012) Development of pH-meter monitoring system using Arduino: article / Mohd Fadhil Ibrahim. pp. 1-8.

Ilias, Mohd Rijal and Rawi, Noraihan Afiqah and Shafie, Sharidan (2017) Steady Aligned MHD free convection of ferrofluids flow over an inclined plate / Mohd Rijal Ilias, Noraihan Afiqah Rawi and Sharidan Shafie. Journal of Mechanical Engineering (JMechE) , 14 (2) . pp. 1-15. ISSN 1823-5514 ; 2550-164X.

Ismail, Noor Hadila (2014) Quadcopter aircraft using Arduino Mega: article / Noor Hadila Ismail. pp. 1-6.

Ismail, Nor Atlina (2013) Pet L.O.V.E (Life Of Virtual Entrust): article / Nor Atlina Ismail. pp. 1-6.

Jasni, Khairul Fitrie (2010) DC motor drives using Peripheral Interface Controller (PIC): article. pp. 1-10.

Kamarudin, Norshuhada (2006) A control system of elevators by using Programmable Logic Controller (PLC): article / Norshuhada Kamarudin. pp. 1-7.

Kassim, Shamshul Anaz (2003) A marketing survey and a perception study of customers' acceptance and interest on Vehicle Tracking System (VTS) in Klang Valley / Shamshul Anaz Kassim. Jurnal Intelek , 1 . pp. 142-157. ISSN 2231-7716.

Luqman, Louwi Iqmal (2017) Redox reaction detection using potentiostat and mbed microcontroller as data acquisition: article / Louwi Iqmal Luqman. pp. 1-5.

Mat Saad, Mohd Shahril (2009) Car crash detector system: article / Mohd Shahril Mat Saad. pp. 1-8.

Mohammad, Ahmad Faiz and Zaki, Sheikh Ahmad and Mat Ali, Mohamed Sukri and Yakub, Fitri (2018) Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 189-204. ISSN 18235514.

Mohd Nor, Mohd Ruzaimi (2010) A study of DC-DC Buck-Boost Converter using fuzzy logic controller: article. pp. 1-8.

Muhamad, Nur Amalina and Othman, Norhalida and Shoib, Mohamad Hilman and Khairul Anuar, Noor Hafizah and Abdul Majid, Masmaria (2025) Enhancing savings with technology: an Arduino-based smart money box. Journal of Electrical and Electronic Systems Research (JEESR) , 27 (1) : 10 . pp. 81-86. ISSN 1985-5389.

Ninomiya, Keiichi and Yoshida, Shun and Okita, Kenji and Koga, Toshihiko and Oshima, Shuzo (2021) Development and testing of a turning process monitoring system using acoustic emission / Keiichi Ninomiya … [et al.]. Journal of Mechanical Engineering , 18 (3) : 9 . pp. 147-162. ISSN 2550 - 164X.

Nongkang, Samsur and Soidon, Azijul and Rostam, Muhammad Daniel Haiqal and Jasnie, Jasnie (2026) i-Magarctic: an intelligent thermoelectric cooling system with anti-condensation control for smartphones. PITRAM 2026 Pertandingan Inovasi Antara Asasi Malaysia Extended Abstract Book . pp. 197-202.

Samsudin, Muhammad Musaddiq (2013) ‘Go green’ smart robot: article. pp. 1-9.

Sanusi, Ahmad Manzum (2012) Design and development of indoor plant watering system using PIC microcontroller: article / Ahmad Manzum Sanusi. pp. 1-8.

Selamat, Muhammad Zuwairi (2006) Mini automatic guided vehicle using peripheral interface controller: article. pp. 1-7.

Sudin, Mohamad Affendi and Mohd Kahar, Muhammad Syafiq Aiman and Kyprianou, Andreas and Wan Iskandar Mirza, Wan Imaan Izhan and Yunus, Mohd Azmi and Febrina, Rina and Mutra, Rajasekhara Reddy and Abdul Rani, Muhamad Norhisham (2025) Predicting vibration characteristics of a bolted pipe assembly with complex boundary and interface constraints via the frequency based substructuring method. Journal of Mechanical Engineering (JMechE) , 22 (3) : 7 . pp. 76-94. ISSN e-ISSN: 2550-164X.

Suhaimey, Muhammad Dzulzikri and Tamin, Norfauzi and Mohd Salleh, Kahirol and Hakimi, Ahmad Arif and Rashidi, Iqmal Farhan and Azlan, Umar Al Amani and Ab Wahab, Norfariza and Wan Abdul Malik, Wan Abdul Hafiz (2025) Optimisation of CNC turning parameters using RSM for inconel 718 in dry cutting conditions, focusing on surface roughness. Journal of Mechanical Engineering (JMechE) , 22 (3) : 2 . pp. 16-27. ISSN e-ISSN: 2550-164X.

Suhairy, Mohd Shazni A PIC-based wiper blade maintenance system: article. pp. 1-5.

Yusof, Mohd Zairol and Rani, Suhaily and Abdul Rafiq, Muhammad Haziq Faruqi and Mohd Noor, Muhammad Idris Haziq and Muhamad Kamalrul Zaman, Muhammad Khawarizmi (2023) D-Box. pp. 335-340.

Zakaria, Norzulaikha (2010) Microcontroller-based fetal heart motion emulator: article / Norzulaikha Zakaria. pp. 1-7.

Zolkapali, Siti Norhana Fatehah and Ishak, Abdul Aziz (2017) Study on the optimum pressure controllability of PID tuning by using different tuning rules: article. pp. 1-5.

Zool, Mohd Noor Hafiz Single phase inverter/charger converter. pp. 1-10.

Book Section

Abdul Malik, Norjasween and Mas’aud, Nurul Hanna and Mohd Zainuddin, Nur Fatihah (2023) Smart cat feeder. In: Johor Innovation Invention Competition and Symposium 2023.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 334-335 . ISBN 978-967-0033-17-4.

Astapa Kamal, Nur Dania Irdeena and Khalid, Muhamad Faris Syafiq (2023) Design and fabrication of coins separator machine / Nur Dania Irdeena Astapa Kamal and Muhamad Faris Syafiq Khalid. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Mohamad Kamal, Muhammad Hafiz Kamal and Sulaiman, Syidatul Akma (2022) Design, analysis and fabrication of automated shirt folder / Muhammad Hafiz Kamal Mohamad Kamal and Syidatul Akma Sulaiman. In: Prototype Design Collection Series 1.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-213 . ISBN 978-967-0033-15-0.

Mohamed Azmi, Afiq Luthfil and Muhammad Nor, Muhammad Zairil (2025) Automatic irrigation with solar tracking system. In: 10th Electrical, Electronics, and Systems Engineering Exhibition 2025 (EESEE 2025).. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 75-77 . ISBN 978-967-0033-67-9.

Mohd Azri, Muhammad Zulhelmi and Sulaiman, Syidatul Akma (2023) Smart watering plants system. In: Johor Innovation Invention Competition and Symposium 2023.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 307-309 . ISBN 978-967-0033-17-4.

Mohd Nasran, Mohamad Ali and Ravi, Shuren Raj and Hamsan, Norul Amin and Shahab, Suhaimi (2024) Innovation of motorcycle anti-theft device using embedded systems and internet of things (IoT) technology. In: Proceedings of Johor International Innovation Invention Competition And Symposium 2024.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 652-656 . ISBN 978-967-0033-25-9.

Mohd Rodzi, Ana Syahidah and Syed Sirattuddin, Syed Muhammad Sufian Shahabudin and Kamardin, Nur Kamarliah and Zubair, Ahmad Faiz and Yahya, Muhamad Irwan and Hemdi, Abdul Rahman (2024) The effect of growth plant in vertical farming structure. In: Proceedings of Johor International Innovation Invention Competition And Symposium 2024.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 15-19 . ISBN 978-967-0033-25-9.

Mohd Zainuddin, Nur Fatihah and Abdul Malik, Norjasween (2023) Automatic cat feeder / Nur Fatihah Mohd Zainuddin and Norjasween Abdul Malik. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Norlizan, Mohamad Naqib and Noordin, Noor Hafiz and Mohd Hamami, Mohd Ghazali (2023) Automatic knife sharpener / Mohamad Naqib Norlizan, Noor Hafiz Noordin and Mohd Ghazali Mohd Hamami. In: Prototype Design Collection Series 2.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-320 . ISBN 978-967-0033-18-1.

Raja Zainuddin, Raja Nuryasmin Balqis and Sulong, Nurulsaidatulsyida (2022) Design, analysis, and fabrication of pet food refill / Raja Nuryasmin Balqis Raja Zainud and Nurulsaidatulsyida Sulong. In: Prototype Design Collection Series 1.. School of Mechanical Engineering , Universiti Teknologi MARA, Johor , pp. 1-213 . ISBN 978-967-0033-15-0.

Conference or Workshop Item

Abu Bakar, Mohammad Amirul Farhan and Abdul Nasir, Luqman Amar and Ali, Nur Afifah and Wan Chek, Wan Ahmad Khusiairi (2018) Cloud controlled watering system using blynk application/ Mohamad Amirul Farhan Abu Bakar ...[et al.]. In: Electrical Engineering Innovation Competition & Exhibition (EEICE) 2018 , 13-14 November 2018 , Dewan Aspirasi, UiTM Cawangan Terengganu .

M.R., Zaidi and M.M., Mahadzir (2014) Simulation study of flow in Fluidized Bed Reactor: vortex distribution / Zaidi M.R. and Mahadzir M.M. In: TeSSHI 2014- Technology, Science Social Sciences, Humanities , 5 & 6 Nov 2014 , One Hotel Helang, Langkawi Kedah Malaysia .

Mahat, Noorsaidi and Husin, Husrul Nizam and Khalil, Natasha and Bohari, Asmah Alia (2012) The effect of oil palm trunk and oil palm fruit bunch fibre on the mechanical properties of laterite bricks / Noorsaidi Mahat ... [et al.]. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

Mohd Zain, Normuhaizah (2008) A study on the effect of mechanical properties and rheologycal behaviour of polyproplene reinforced montmorillonite / Normuhaizah Mohd Zain. In: . (Submitted)

R. A., Rasih and Ahmad Bakir, Azman and Zubair, Ahmad Faiz and Abdul Latif, Mohd Noor Halmy (2014) Natural convection in Polar Enclosure / R. A. Rasih...[et al.]. In: TeSSHI 2014 , 5 & 6 Nov 2014 , One Hotel Helang, Langkawi Kedah Malaysia .

Rosli, Nur Diyanah and Hussin, Norasikin and Mahmod @ Wahab, Rohidatun (2022) Smart blind walking stick / Nur Diyanah Rosli ... [et al.]. In: .

Book

Mohd Radzol, Afaf Rozan and Isa, Iza Sazanita and Baharudin, Rohaiza and Shamsuddin, Sarah Addyani and Chong, Belinda Chiew Meng (2025) Control systems: analysis and design theory / Afaf Rozan Mohd Radzol ... [et al.]. UiTM Press , Universiti Teknologi MARA (UiTM) . ISBN 978-629-496-063-3.

Thesis

Abd Ghafar, Ahmad Faridz (2008) Implementation of half-bridge active power filter using fuzzy logic control / Ahmad Faridz Abd Ghafar. Masters Thesis , Universiti Teknologi MARA .

Abdul Aziz, Mohd Naqiyuddin (2004) Cleaning automotive part using fluidized bed reactor / Mohd Naqiyuddin Abdul Aziz. Degree Thesis , Universiti Teknologi MARA .

Abdul Karim, Kamarulzaman (1994) Computerised water depth measurement using piezoresistivity pressure transducer / Kamarulzaman Abdul Karim. Advanced Diploma Thesis , Universiti Teknologi MARA (UiTM) .

Abdul Latip, Syazuan (2014) Degradation and wear analysis of automatic transmission fluid (ATF) of 1.3l automatic transmission (AT) vehicle / Syazuan Abdul Latip. Masters Thesis , Universiti Teknologi MARA .

Abdul Rahman, Norhanifah (2015) Wear characterization by oil analysis in automatic and manual bus engine gearbox / Norhanifah Abdul Rahman. Masters Thesis , Universiti Teknologi MARA .

Abdul Rasid, Mohd Nur Haziq (2019) Smart clothesline using Arduino / Mohd Nur Haziq Abdul Rasid. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Abdullah, Mohd. Alias (2004) Analysis of the exhaust emission on the variable spark strength with stoichiometric air - fuel ratio / Mohd. Alias Abdullah. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Abdullah, Norlaina (2003) The fan controller system using microcontroller (PIC16F877) / Norlaina Abdullah. Degree Thesis , Universiti Teknologi MARA .

Abdullah, Wan Normimi Roslini (2013) Synthesis and characterization of electrodeposited cobaltiron nanoparticles on different substrates / Wan Normimi Roslini Abdullah. Masters Thesis , Universiti Teknologi MARA .

Ahmad Hamidi, Shahfuan Hanif (2014) The performance of small wire submerged arc welding on carbon steel / Shahfuan Hanif Ahmad Hamidi. Masters Thesis , Universiti Teknologi MARA .

Ahwan, Ernie Syazwanie (2013) Simulation of three phase switched reluctance motor by using xcos / Ernie Syazwanie Ahwan. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ali @ Harun, Muhammad (2003) Failure analysis on Kriss motorcycles handle locking mechanism / Muhammad Ali @ Harun. Degree Thesis , Universiti Teknologi MARA .

Alias, Aniza (2009) Surface integrity of material machined using Electrical Discharge Machining (EDM) with and without vibration / Aniza Alias. Degree Thesis , Universiti Teknologi MARA .

Annuar, Ishak (2006) The centralised hazardous gas detector using microcontroller / Ishak Annuar. Masters Thesis , Universiti Teknologi MARA .

Anuwar, Fahteem Hamamy (2012) Classification of transient disturbance using Wavelet based support vector machine / Fahteem Hamamy Anuwar. Masters Thesis , Universiti Teknologi MARA .

Azlan, Afiq Hanafie (2021) Development of compact dissolve oxygen (CDO) with IOT monitoring system / Afiq Hanafie Azlan. Masters Thesis , Universiti Teknologi MARA .

Azman, Aniq Syahmi (2026) Optimizing multi-chiller energy efficiency using a hybrid genetic algorithm-barnacle mating optimizer (GA-BMO) and dynamic scheduling. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Bahtiar, Mohd Firdouz (2009) Vault's floor security sensor with RFID access using microcontroller/ Mohd Firdouz Bahtiar. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Bakeri, Mohd Saiful Arif (2015) Motorcyclists reaching posture database for different motorcycle models / Mohd Saiful Arif Bakeri. Degree Thesis , Universiti Teknologi MARA .

Che Mustapha, Mohd Isran (1994) Single phase controller for automated stand by generator for low power applications using programmable logic controller (PLC) / Mohd Isran Che Mustapha. Advanced Diploma Thesis , Institut Teknologi MARA (ITM) .

Ghazali, Zharif Farhan (2010) Solid propellant formulation and testing for MESO-scale rocket / Zharif Farhan Ghazali. Degree Thesis , Universiti Teknologi MARA .

Hamid, Aminuddin (2015) Real-time measurement and gait detection algorithm for motion control of active ankle foot orthosis / Aminuddin Hamid. Masters Thesis , Universiti Teknologi MARA .

Harman, Mamias (2013) Arduino-based faulty pilot cable detector and digital sampling oscilloscope / Mamias Harman. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Harun, Mohd Al-Hafiz (2008) Sit-to-stand movements using PID controller / Mohd Al-Hafiz Harun. Degree Thesis , Universiti Teknologi MARA .

Hashim, Hamirul Adli (2004) Thrust test stand for pulse jet engine / Hamirul Adli Hashim. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ibrahim, Mohd Fadhil (2012) Development of pH-meter monitoring system using Arduino / Mohd Fadhil Ibrahim. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ismail, Mohd Izat (2009) A study on the mixing process in the paint industries development of a drum barrel jig / Mohd Izat Ismail. Degree Thesis , Universiti Teknologi MARA .

Ismail, Noor Hadila (2014) Quadcopter aircraft using Arduino Mega / Noor Hadila Ismail. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ismail, Nor Atlina (2013) Pet L.O.V.E (Life of virtual Entrust) / Nor Atlina Ismail. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ismail @ Rosdi, Ahmad Syakirin (2014) Stadium's wireless control system using Global System for Mobile Communication (GSM) and Arduino controller / Ahmad Syakirin Ismail @ Rosdi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Jamaludin, Mohamad Ikhwan (2015) Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin. Masters Thesis , Universiti Teknologi MARA .

Jawahir, Mohammad Arif (2006) Wave effect on bulk carrier structure / Mohammad Arif Jawahir. Degree Thesis , Universiti Teknologi MARA .

Johari, Dalina (2009) Hybrid evolutionary programming-artificial neural network-based lightning prediction system / Dalina Johari. Masters Thesis , Universiti Teknologi MARA .

Kamarudin, Norshuhada (2006) A control system of elevators by using Programmable Logic Controller (PLC). Degree Thesis , Universiti Teknologi MARA (UiTM) .

Kamarudin, Nurisha Hania (2019) Development of automatic waste segregator with monitoring system / Nurisha Hania Kamarudin. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Kamarul, Shahrul Shahrizan (2010) Preliminary work on improving air conditioning COP by using condensate water to enhance the cooling process / Shahrul Shahrizan Kamarul. Degree Thesis , Universiti Teknologi MARA .

Leman, Abdul Mutalib (2011) Development of industrial air pollution monitoring system for safety and health enhancement and sustainable work environment in Small and Medium Industries (SMI's) / Abdul Mutalib Leman. PhD Thesis , Universiti Teknologi MARA .

Luqman, Louwi Iqmal (2017) Redox reaction detection using potentiostat and mbed microcontroller as data acquisition / Louwi Iqmal Luqman. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mamat @ Abdul Ghani, Mohd Supiyan (1999) Keberkesanan bot untuk nelayan laut dalam berdasarkan sistem pengendalian, keselamatan, kapasiti muatan dan penggunaan sumber tenaga di pantai timur semenanjung / Mohd Supiyan Mamat @ Abdul Ghani. Degree Thesis , Universiti Teknologi MARA .

Mansor, Azarudin Yusof (2007) Application of ATMFL AT89S52 microcontroller for real time temperature control system / Azarudin Yusof Mansor. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mat Norman, Mohd Arif (2024) Development of a novel natural frequencies prediction tool for laminated composite plates using integrated artificial neural network (ANN) - simulink MATLAB / Mohd Arif Mat Norman. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Md Saad, Junaidah (2010) The effect of fuel additives on performance and emission of four stroke engine / Junaidah Md Saad. Degree Thesis , Universiti Teknologi MARA .

Md Salleh, Muhammad Haris and Ibrahim, Abdul Aziz and Illias, Aminuddin (2002) Automotive electronic control unit (ECU) / Muhammad Haris Md Salleh, Abdul Aziz Ibrahim and Aminuddin Illias. Diploma Thesis , Universiti Teknologi MARA (UiTM) .

Md. Jilis, Sharum (2002) Gasoline Direct Injection - Three dimensional CFD study employing fluent V 4.25 / Sharum Md. Jilis. Degree Thesis , Universiti Teknologi MARA .

Mohamad Basri, Mohamad Amirul (2018) Microcontroller-based sensory modules for cognitive therapy in multisensory rooms / Mohamad Amirul Mohamad Basri. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mohamed Sari, Mohd Ridhwan (2012) Mobile surveillance system for UiTM (Terengganu) using motion detection mechanism / Mohd Ridhwan Mohamed Sari. Degree Thesis , Universiti Teknologi MARA Terengganu .

Mohd Abbas, Norliana (2008) Effect of different dielectrics and work piece vibration on electrical discharge machining (EDM) / Norliana Mohd Abbas. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mokhtar, Ridwan (2006) Study on the aerodynamics analysis for Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) using Computational Fluid Dynamics (CFD) for subsonic flow / Ridwan Mokhtar. Degree Thesis , Universiti Teknologi MARA .

Muhamad Zaman, Mohd Nurul Iman (2010) A study of current frame slider usage on motorcycle / Mohd Nurul Iman Muhamad Zaman. Degree Thesis , Universiti Teknologi MARA .

Nik Hamid, Nik Hamidi (1994) Automatic controller for running single phase generator using pc / Nik Hamidi Nik Hamid. Advanced Diploma Thesis , Universiti Teknologi MARA (UiTM) .

Norazan, Siti Sabariah (2019) Real-time monitoring system of electricity consumption in office space operation / Siti Sabariah Norazan. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Nordin, Shafiq (2018) Raspberry PI 3 based of smart system temperature control in greenhouse / Shafiq Nordin. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Othman, Kama Azura (2007) GPS application in vehicle tracking system / Kama Azura Othman. Masters Thesis , Universiti Teknologi Mara (UiTM) .

Othman, Nurnida Elmira (2014) Design and development of a mouth spacer for Dental surgery applications / Nurnida Elmira Othman. Masters Thesis , Universiti Teknologi MARA .

Pauzi, Mohd Ierokie (2018) Gas leakage monitoring system using raspberry Pi 3 model B and IoT solution for smart home / Mohd Ierokie Pauzi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Rosli, Mohd Ridzuan (2003) Robotics for arc welding / Mohd Ridzuan Rosli. Degree Thesis , Universiti Teknologi MARA .

Sahak, Sharum (2006) Autonomous smart robot as fire detector / Sharum Sahak. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Shah Hassan, Mohd Khairul Anuar (2010) Rice husk to charcoal converter machine (vertical type) / Mohd Khairul Anuar Shah Hassan. Degree Thesis , Universiti Teknologi MARA .

Shamlani, Mohd. Saleh (1995) Development of high current source / Mohd. Saleh Shamlani. Advanced Diploma Thesis , MARA Institute of Technology (ITM) .

Suhaimi, Suraya Ahmad (2015) The effect of stitching parameters on the puncture resistance properties of high strength fabric system / Suraya Ahmad Suhaimi. Masters Thesis , Universiti Teknologi MARA .

Suhairy, Mohd Shazni (2009) A PIC-based wiper blade maintenance system / Mohd Shazni Suhairy. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Tengku Mohamed, Tengku Luqman (2016) A fuzzy-active force based control architecture for characterizing a nonlinear MIMO system / Tengku Luqman Tengku Mohamed. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Wan Muda, Wan Mohd Zabidi (2003) Smart temperature control system for agriculture through personal computer by RS232 channel / Wan Mohd Zabidi Wan Muda. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Wan Zaidi, Wan Muhammad Hilmi (2017) Android-connected arm-based voltammetry technique for amperometric sensing system / Wan Muhammad Hilmi Wan Zaidi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Yaakub, Mohd Zulhisam (2016) The comparison of interactive 3D visualization between static and animated approaches for learning binary tree topic / Mohd Zulhisam Yaakub. Masters Thesis , Universiti Teknologi MARA .

Za'bar, Johan Ariff (2009) Experimental study on the characteristics of cascade Control / Johan Ariff Za'bar. Degree Thesis , Universiti Teknologi MARA .

Zainal Abidin, Muhammad Akhiruddin (2024) Physicochemical characteristics of autochthonously-fermented prawn shell chitosan and its effects on drought-stress Solanum melongena L. Masters Thesis , Universiti Teknologi MARA, Shah Alam .

Zainordin, Muhamad Syamim (2015) Enhancement of the Postura Motergo™ test rig's dynamics / Muhamad Syamim Zainordin. Degree Thesis , Universiti Teknologi MARA .

Student Project

Ab. Rahim, Adam Hood and Ab. Wahab, Aqil and Alwi, Mohd. Yasin and Ahmad Subki, Iftitah (2002) Arrow coin system / Adam Hood Ab. Rahim … [et al.] Aqil Ab. Wahab, Mohd. Yasin Alwi, H.M. Iftitah Ahmad Subki. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Ab. Rahim, Ahmad Abdul Hakim (2022) Solar water heater in UiTM Bukit Besi college / Ahmad Abdul Hakim Ab. Rahim. [Student Project] (Submitted)

Ab. Rahim, Mohd Edfarizal (2012) Single Phase Inductor Motor Solid State Drive using PWM Technique / Mohd Edfarizal Ab. Rahim. [Student Project] (Unpublished)

Abd Aziz, Fathul Muin and Mat Said, Mohd Sharizal and Mohd Ali, Mohd Khairul Bukhari (2002) Recycled hot air from air conditioner / Fathul Muin Abd Aziz ,Mohd Sharizal Mat Said and Mohd Khairul Bukhari Mohd Ali. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Abd Malik, Amirrul Ashraf and Ibrahim, Mohammad Aimie and Mat Udin, Mohd Khairul Anuar (2013) Automatic car jack / Amirrul Ashraf Abd Malik, Mohammad Aimie Ibrahim and Mohd Khairul Anuar Mat Udin. [Student Project] (Unpublished)

Abd Manan, Muhammad Al-Mughaizi and Mohamad, Zunawanuh and Wan Mohd Zulkifli, Wan Mohamad Zulfaqih (2017) Development of portable semi-automatic cultivator for grey oyster mushroom production / Muhammad Al-Mughaizi Abd Manan, Zunawanuh Mohamad and Wan Mohamad Zulfaqih Wan Mohd Zulkifli. [Student Project] (Submitted)

Abd Raman, Mohd Fazli and Ersad, Mohd Raimi (2015) Password based door lock system using 8051 microcontroller / Mohd Fazli Abd Raman & Mohd Raimi Ersad. [Student Project] (Unpublished)

Abdul Azmi, Abdul Wafiq Qayyum (2022) Modelling of a steep near shore waves at Terengganu coastline during monsoon season using computational method / Abdul Wafiq Qayyum Abdul Azmi. [Student Project] (Submitted)

Abdul Halim, Nuril Ajwad and Mohamad Nor, Nur Zahidah and Suhaimi, Nurhafizah (2015) Automatic fish feeder / Nuril Ajwad Abdul Halim, Nur Zahidah Mohamad Nor and Nurhafizah Suhaimi. [Student Project] (Submitted)

Abdul Manaff, Syariful Afiqi and Ahmad Ibrahim, Muhammad Fadhil (2015) Rain alarm / Syariful Afiqi Abdul Manaff & Muhammad Fadhil Ahmad Ibrahim. [Student Project] (Unpublished)

Abdul Mutalib, Syadiyatul Qistina (2020) Development of clean-up tagging system for children / Syadiyatul Qistina Abdul Mutalib. [Student Project] (Unpublished)

Abdul Rahman, Amir Mu'az and Wan Mayu Othman, Wan Mohd Nasri (2015) Weight sensing alarm clock / Amir Mu'az Abdul Rahman & Wan Mohd Nasri Wan Mayu Othman. [Student Project] (Unpublished)

Abdul Rahman, Mohammad Ikmal and Mohd Amin, Abdullah Aqil and Johari, Faiz Izzuddin (2013) Automatic temperature control fan / Mohammad Ikmal Abdul Rahman, Abdullah Aqil Mohd Amin and Faiz Izzuddin Johari. [Student Project] (Unpublished)

Abdullah, Abdul Hali (1981) The design and fabrication of a wax-injection vessel for investment casting / Abdul Hali Abdullah. [Student Project] (Unpublished)

Abdullah, Mohd Izuddin and Norani, Norhamizal (2001) Impact performance of poly-matrix composite reinforced foam / Mohd Izuddin Abdullah and Norhamizal Norani. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Adnan, Nur Alya Afiqah (2022) Effect of different cooling water flow rates in condenser on a steam motor power plant / Nur Alya Afiqah Adnan. [Student Project] (Submitted)

Ahamad Nordin, Ikhwan Alif and Sulong, Shahrul Ikhwan (2013) Remote curtain. [Student Project] (Unpublished)

Ahmad Rodi, Faizul Akmal and Mohd Aisa, Mohd Azlan and Bakar, Azizi (2003) Study the effect of spring length on vibrational capacity of an automobile / Faizul Akmal Ahmad Rodi, Mohd Azlan Mohd Aisa and Azizi Bakar. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Ajang, Gilbert Nuang and Mohamad Fadzli, Abdullah Affifi and Mohamad Akhrazdi, Ahmad Baihaqie (2015) Water sprinkler automated / Gilbert Nuang Ajang, Abdullah Affifi Mohamad Fadzli & Ahmad Baihaqie Mohamad Akhrazdi. [Student Project] (Unpublished)

Aleakhber, Zuliah and Jumaat, Mohd. Nizam (1995) Heating and cooling in flutdised bed furnace for heat treatment and industrial applications / Zuliah Aleakhber and Mohd. Nizam Jumaat. [Student Project] Faculty of Mechanical Engineering, Universiti Teknologi MARA. (Unpublished)

Anuar, Mohammad Zhafir and Mihdzar, Ayman and Othman, Muhammad Abas (2013) Automatic clothes dryer / Mohammad Zhafir Anuar, Ayman Mihdzar and Muhammad Abas Othman. [Student Project] (Submitted)

Anuar, Muhammad Amiruddin and Roslan, Aminuddin (2015) Portable water sprinkler / Muhammad Amiruddin Anuar & Aminuddin Roslan. [Student Project] (Unpublished)

Astapa Kamal, Nur Dania Irdeena (2023) Design and fabrication of coins separator machine / Nur Dania Irdeena Astapa Kamal. [Student Project] (Unpublished)

Azhar, Anwar Zharif (2022) Level control of process control / Anwar Zharif Azhar. [Student Project] (Unpublished)

Azhar, Muhammad Izzuddin (2015) Automatic plant watering system / Muhammad Izzuddin Azhar. [Student Project] (Unpublished)

Azman, Adreanna Maisara (2025) Design and fabrication of an automated cat feeder. [Student Project] (Unpublished)

Azmi, Mohamad Arif (2022) Portable mist maker for fan / Mohamad Arif Azmi. [Student Project] (Submitted)

Badiizzaman, Mohammad Ikhwan and Ramli, Muhammad Naqiuddin (2015) Light beam precaution system / Mohammad Ikhwan Badiizzaman and Muhammad Naqiuddin Ramli. [Student Project] (Unpublished)

Baharulrazi, Mohd. Farriz and Mohamad Alli, Farah Hani and Abd. Hamid, Rosmaria (2001) Newly modified tensile test fixture / Mohd. Farriz Baharulrazi, Farah Hani Mohamad Alli and Rosmaria Abd. Hamid. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Bakri, Adnan and Mukhtar, Suhaimi (1997) Magnetic ceramic / Adnan Bakri and Suhaimi Mukhtar. [Student Project] (Unpublished)

Che Ku Yusoff, Ku Muhammad Faiz and Amiruddin, Nadiah Aqilah and Abdull Rahman, Bibi Roihan (2016) Agriculturalist fish feeder / Ku Muhammad Faiz Che Ku Yusoff, Nadiah Aqilah Amiruddin and Bibi Roihan Abdull Rahman. [Student Project] (Submitted)

Dakek, Ijen and Samsuri, Hamizad (1990) To investigate the interaction of the variables in oxygen cutting and their effects on the quality of cut / Ijen Dakek and Hamizad Samsuri. [Student Project] (Unpublished)

Fazilan, Fakhrul Adam (2022) The effect of machining parameters on surface integrity of aluminium material using lathe machine / Fakhrul Adam Fazilan. [Student Project] (Submitted)

Hamdan, Muhammad Amirullah (2024) Virtuswitch with capacitive technology with Blynk / Muhammad Amirullah Hamdan. [Student Project] (Unpublished)

Haridan, Shahrul Shafiz and Abdul Mutahar, Mohd Rezal and Johari, Qhairul Adzhar (2015) Portable lifting machine for the elderly / Shahrul Shafiz Haridan, Mohd Rezal Abdul Mutahar and Qhairul Adzhar Johari. [Student Project] (Submitted)

Harun, Hanis Syamimi and Syahirah Adzahar, Nurul Syahirah (2015) Smart aquarium / Hanis Syamimi Harun and Nurul Syahirah Adzahar. [Student Project] (Unpublished)

Harun, Muhammad Syafiq (2014) Virtual light communication based traffic and road information broadcasting system. [Student Project] (Unpublished)

Harun Anuar, Muhammad Fikri (2022) Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. [Student Project] (Unpublished)

Hussain, Nor Hasnan and Juhari, Mat Yudin (1986) Programming solutions for machining / Nor Hasnan Hussain and Mat Yudin Juhari. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Hussein, Muhammad ‘Afif (2020) Flip flop water fountain / Muhammad ‘Afif Hussein. [Student Project]

Ibrahim, Mohamad Syariffudin and Jumingan, Mohamad Famee and Ali, Muhammad Nur Fahmi (2014) Smart car navigation system based on A.R.M technology / Mohamad Syariffudin Ibrahim, Mohamad Famee Jumingan and Muhammad Nur Fahmi Ali. [Student Project] (Submitted)

Ishamudin, Aidil Ahmad Akma and Khairul Faizi, Alif Hakeem and Muhammad Ariff, Adam Nur Ridzuan and Abd Jalal, Abdul Shahmi Farhan and Musbahuddin, Ezatul Asykin Door-vid (self sanitizing door handle) / Aidil Ahmad Akma Ishamudin ...[et al.]. [Student Project]

Ismail, Abdul Razak and Timin, Zainuddin (1995) Friction and wear studies on brake lining using ansy (FEA ) / Abdul Razak Ismail and Zainuddin Timin. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Ismail, Muhammad Afiq and Marzukhi, Muhammad Fauzi (2015) Arduino automatic door opening system / Muhammad Afiq Ismail and Muhammad Fauzi Marzukhi. [Student Project] (Unpublished)

Ismail, Nur Ain Fathania and Tengku Kahar, Tengku Suhaida Atikah and Marzuki, Muhammad Faaiz (2018) Robotic lawn mower via bluetooth / Nur Ain Fathania Ismail, Tengku Suhaida Atikah Tengku Kahar and Muhammad Faaiz Marzuki. [Student Project] (Submitted)

Ismail, Shamsudin and Hamzah, Abd. Hafidz (1990) Conveyor belt control by programmable logic controller / Shamsudin Ismail and Abd. Hafidz Hamzah. [Student Project] (Unpublished)

Jaafar, Azhar Jaafar and Mohamad Fathil, Fadzli (1991) Pengiraan radiasi solar yang mengenai satu satah horizontal di Shah Alam dengan menggunakan program komputer / Shaiful Azhar Jaafar and Mohd Fadzli Mohamad Fathil. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Jefferi, Muihammad Daniel Addin (2024) Automatic and remote controlled pet feeder using Blynk / Muihammad Daniel Addin Jefferi. [Student Project] (Unpublished)

Jefry, Muhamad Shahmizal Hafiz (2023) Design and fabrication of automatic gear window. [Student Project] (Unpublished)

Johan Effendy, Jazzly Erfan (2024) Sign analysis and fabrication of automatic cat feeder. [Student Project] (Unpublished)

Jusli, Muhammad Faris Naqiuddin (2024) Design and fabrication of an automatic self-folding table. [Student Project] (Unpublished)

Kamarul Anuar, Muhammad Syakirin and Azrat Gull, Azril Aizam Gull (2015) Analog analyzer / Muhammad Syakirin Kamarul Anuar & Azril Aizam Gull Azrat Gull. [Student Project] (Unpublished)

Kamarul Zaman, Mustaqim Syah (2025) Design and fabrication of a weather sensing cloth drying rack. [Student Project] (Unpublished)

Khairuanuar, Nur Dayana Asilah (2022) Automatic drain cleaner / Nur Daliela Wahida Zamry. [Student Project] (Submitted)

Khairuddin, Abdul Syukur and Ahmad Aminuddin, Fatin Nur Syamim Iliya and Yusri, Fatin Nur Khalida (2016) Automatic rice dispenser / Abdul Syukur Khairuddin, Fatin Nur Syamim Iliya Ahmad Aminuddin and Fatin Nur Khalida Yusri. [Student Project] (Submitted)

Khairuddin, Muhamad Azim Wafiq and Wan Azman, Wan Aina Fazira and Hamdan, Taufiq (2015) Automatic scarecrow / Muhamad Azim Wafiq Khairuddin, Wan Aina Fazira Wan Azman and Taufiq Hamdan. [Student Project] (Submitted)

Khalil, Ahmad Fauzi and Undom, Jawan (1991) Control devices in refrigeration system / Ahmad Fauzi Khalil and Jawan Undom. [Student Project] (Unpublished)

Khalmaiza, Muhammad Irfan (2022) Design and fabricate 3D handphone casing / Muhammad Irfan Khalmaiza. [Student Project] (Submitted)

Lukman, Muhammad Izzat (2023) Design and fabrication of pestle and mortar machine / Muhammad Izzat Lukman. [Student Project] (Unpublished)

Mahari, Baharuddin and Chik, Syamsul Asri (2003) Automatic Fish Feeder / Baharuddin Mahari and Syamsul Asri Chik. [Student Project] (Unpublished)

Mamat, Mohd Rizuwan and Abdul Rahman, Rosman (2003) Product layout used by eastern and western companies; similarities and differences / Mohd Rizuwan Mamat and Rosman Abdul Rahman. [Student Project] (Unpublished)

Mansor, Mohamad Karim and W. Ab Rahman, Wan Md. Nor Ismadi (1994) Design of drop weight test system (system, mechanism, control and operation) / Mohamad Karim Mansor and Wan Md. Nor Ismadi W. Ab Rahman. [Student Project] (Unpublished)

Mat Jani, Abdullah Syahril and Jamaluddin, Azrein and Ghazali @ Mat Rol, Mohamad Fahmi (2001) Fuel vapour recovery / Abdullah Syahril Mat Jani, Azrein Jamaluddin and Mohamad Fahmi Ghazali @ Mat Rol. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Mat Noh, Mohd Khairul Nizam and Ibrahim, Ahmad Lutpi and Hashim, Hanizar (1990) Temperature control using IBM/PC / Mohd Khairul Nizam Mat Noh, Ahmad Lutpi Ibrahim and Hanizar Hashim. [Student Project] (Unpublished)

Mat Saad, Mohd Shahril (2009) Car crash detector system/ Mohd Shahril Mat Saad. [Student Project] (Unpublished)

Mat Yit, Fazil (2000) Group Technology / Fazil Mat Yit. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Md Shariff, Nur Ainni (2008) Mechanical properties of polypropylene blends with banana fibre / Nur Ainni Md Shariff. [Student Project] (Unpublished)

Md Zain, Ahmad Yasir (2008) PIC microcontroller based temperature measuring system using thermocouple sensor / Ahmad Yasir Md Zain. [Student Project] (Unpublished)

Mohamad, Yusb Ishaq and Mior Ahmad, Mior Sharul Nizam (2004) Homogenous feedstock for metal injection molding (MIM) process / Yusb Ishaq Mohamad and Mior Sharul Nizam Mior Ahmad. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Mohamad Amini, Mohamad Adib and Abdur Rahman, Nuralya Aiman (2015) Automatic chicken feeder / Mohamad Adib Mohamad Amini & Nuralya Aiman Abdur Rahman. [Student Project] (Unpublished)

Mohamad Fuad, Muhammad Fikri (2017) Optimization of turning operation toward surface quality using Response Surface Methodology (RSM) / Muhammad Fikri Mohamad Fuad. [Student Project] (Unpublished)

Mohamad Rosdi, Ainul Iffat (2022) Comparative study of drag and lift force for different shapes of hydrofoils / Ainul Iffat Mohamad Rosdi. [Student Project] (Unpublished)

Mohamed, Nurfarahin and Zainuddin, Zafirah (2015) Smart dustbin / Nurfarahin Mohamed & Zafirah Zainuddin. [Student Project] (Unpublished)

Mohamed Hazaruddin, Nur Suziyana and Mat Yunus, Nurul Fara Nabila (2015) Semi automatic moving roof / Nur Suziyana Mohamed Hazaruddin & Nurul Fara Nabila Mat Yunus. [Student Project] (Unpublished)

Mohd Adli, Muhammad Azzahan Daniel (2022) Pressure control process / Muhammad Azzahan Daniel Mohd Adli. [Student Project] (Unpublished)

Mohd Ghafar, Mohd Noor (2003) Smart temperature control for agriculture through personal computer by RS232 channel / Mohd Noor Mohd Ghafar. [Student Project] (Unpublished)

Mohd Nasir, Mohammad Rizauddin (2022) Effect of different motor speeds of single cylinder compressor on refrigeration system / Mohammad Rizauddin Mohd Nasir. [Student Project] (Unpublished)

Mohd Nasir, Noorfatin Mohd and Mohd Kamar, Nur Syaza (2015) Multipurpose fish feeder / Noorfatin Mohd Nasir & Nur Syaza Mohd Kamar. [Student Project] (Unpublished)

Mohd Nasir, Siti Hajar and Mat Ali, Aimy Athirah (2015) Arduino based water level detector / Siti Hajar Mohd Nasir and Aimy Athirah Mat Ali. [Student Project] (Unpublished)

Mohd Nor, Mohd Ruzaimi (2010) A study of DC-DC Buck-Boost converter using fuzzy logic controller. [Student Project] (Unpublished)

Mohd Rashdi, Abdullah Munzir and Mohd Suhaimi, Ahmad Wafi and Hudari, Ahmad Fauzan (2015) Renewable energy: wind lawn mower / Abdullah Munzir Mohd Rashdi, Ahmad Wafi Mohd Suhaimi and Ahmad Fauzan Hudari. [Student Project] (Submitted)

Mohd Riduan, Irfan Yusuf (2023) Development of automatic pneumatic punching and rivet machine / Irfan Yusuf Mohd Riduan. [Student Project] (Unpublished)

Mohd Rosli, Muhammad Nurafiq (2023) Development of an automated BBQ grill / Muhammad Nurafiq Mohd Rosli. [Student Project] (Unpublished)

Mohd Saadon, Siti Nurshaline and Zakaria, Muhammad Hafizi (2015) Electronic automatic door / Siti Nurshaline Mohd Saadon and Muhammad Hafizi Zakaria. [Student Project] (Unpublished)

Mohd Saiful Nizam, Asif Muhaimin (2023) Development of a prototype automatic sauce dispenser / Asif Muhaimin Mohd Saiful Nizam. [Student Project] (Unpublished)

Mohd Taib, Abdul Hapiz and Jamaluddin, Mohd Azwan Affendi and Abd Majid, Mohd Faizal and Bohari, Mohd Firdaos (2001) The steering system case study: power assisted steering system / Abdul Hapiz Hj Mohd Taib … [et al.]. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Mohd Zaidi, Abdul Azim (2022) The effect of machining parameters on surface integrity of aluminium material using vertical milling machine / Abdul Azim Mohd Zaidi. [Student Project] (Submitted)

Mohd Zainuddin, Nur Fatihah (2023) Design, fabrication and analysis of automatic cat feeder / Nur Fatihah Mohd Zainuddin. [Student Project] (Unpublished)

Mohtar @ Mokhtar, Muhammad Husaini (2003) Wireless electronic handbag (WEHB). [Student Project] (Unpublished)

Muhammad, Ummar and Mohd Shukor, Mohamad Hairul Ariffin (2015) Anti-theft door lock system / Ummar Muhammad & Mohamad Hairul Ariffin Mohd Shukor. [Student Project] (Unpublished)

Muhammad Razif, Muhammad Hisyamuddin (2024) Design and fabrication of automatic cat feeder / Muhammad Hisyamuddin Muhammad Razif. [Student Project] (Unpublished)

Mukhtar, Mohd. Effandy and Sahani, Muhamad Nor Taufik and Majuan, Shahirrunizan (2002) Experimental study of laminar and turbulent flow / Mohd. Effandy Mukhtar, Muhamad Nor Taufik Sahani and Shahirrunizan Majuan. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Musa, Muhammad Aizmin and Misel Khan, Nur Hanisah (2015) Smart auto toilet system / Muhammad Aizmin Misel Khan & Nur Hanisah Musa. [Student Project] (Unpublished)

Nazman, Hazrjen and A. Bakar, Ahmad Syafiq Aiman and Azme, Izyan Auni (2016) Real time strategy robotic games / Hazrjen Nazman, Ahmad Syafiq Aiman A. Bakar and Izyan Auni Azme. [Student Project] (Submitted)

Nik Wan, Nik Shaphiran and Nik Ariff, Nik Sulhan (1996) Compression Coil Spring System / Nik Shaphiran Nik Wan and Nik Sulhan Nik Ariff. [Student Project] (Unpublished)

Norlizan, Mohamad Naqib (2023) Design and fabrication of automatic knife sharpener / Mohamad Naqib Norlizan. [Student Project] (Unpublished)

Nuzuamry, Nursiti Aisyah (2023) Analysis of blood flow in artificial cancellous bone on CFD simulation / Nursiti Aisyah Nuzuamry. [Student Project] (Unpublished)

Omar, Ariff Safwan and Mat Nawawi, Muhammad Asyraf and Shaikh A.Rahim, Sarminadira (2015) Smart electromechanical dustbin for dry particle / Ariff Safwan Omar, Muhammad Asyraf Mat Nawawi and Sarminadira Shaikh A.Rahim. [Student Project] (Submitted)

Roslan, Ammar Zafri (2024) Design, analysis and fabrication of automated forklift / Ammar Zafri Roslan. [Student Project] (Unpublished)

Roslan, Muhammad Izzat and Wan Azhar, Wan Ahmad Firdaus and Mohamad Rohim, Mohamad Arif Syafiq (2015) Car accident prevention by using tilt sensor / Muhammad Izzat Roslan, Wan Ahmad Firdaus Wan Azhar and Mohamad Arif Syafiq Mohamad Rohim. [Student Project] (Submitted)

Rozainal, Muhammad Aliff Ruzail and Shamsul Izran, Muhamad Haziq (2020) Automated monitoring system in vertical farming / Muhammad Aliff Ruzail Rozainal and Muhamad Haziq Shamsul Izran. [Student Project] (Unpublished)

Sales, Muhsin and Ambotuo, Mohamad Afiz and Abdul Rahim, Muhammad Hafizh (2015) Electronic safety drawer / Muhsin Sales, Mohamad Afiz Ambotuo & Muhammad Hafizh Abdul Rahim. [Student Project] (Unpublished)

Sani, Adila and Fauzan, Nurul Afiqah (2015) Smart water level indicator / Adila Sani and Nurul Afiqah Fauzan. [Student Project] (Unpublished)

Sanusi, Ahmad Manzum (2012) Design and development of indoor plant watering system using PIC microcontroller / Ahmad Manzum Sanusi. [Student Project] (Unpublished)

Sapri, Syafiq Izzuddin (2017) Effect of various tuning methods toward the controllability of temperature controller. [Student Project] (Unpublished)

Selamat, Muhammad Zuwairi (2006) Mini automatic guided vehicle using peripheral interface controller. [Student Project] (Unpublished)

Shamsul Baharin, Muhammad Syafiq and Radzi, Mohd Syafiq Izwan (2015) Smart curtain / Muhammad Syafiq Shamsul Baharin & Mohd Syafiq Izwan Radzi. [Student Project] (Unpublished)

Sipan, Khadijah and Ibrahim, Mohd. Kamal (1990) Kajian kemungkinan bagi menyewakan kelengkapan bengkel mekanikal kepada bakal usahawan / Khadijah Sipan and Mohd. Kamal Ibrahim. [Student Project] (Unpublished)

Sudin, Danish Fathi (2024) Development of a prototype portable automatic hammer / Danish Fathi Sudin. [Student Project] (Unpublished)

Tani, Hamadi and Mohd Kassim, Mustapa Kamal (1989) A development of temperature control simulation on YEWPACK MARK II system / Hamadi Tani and Mustapa Kamal Mohd Kassim. [Student Project] (Unpublished)

Wan Zainudin, Wan Muhammad Lukman and Azhar, Zulkifli and Salim, Syahmi (2015) Smart lighting system for rose / Wan Muhammad Lukman Wan Zainudin, Zulkifli Azhar and Syahmi Salim. [Student Project] (Submitted)

Yahya, Zainuddin and Bakri, Mustafa (1999) Environmental assisted cracking in power plant / Zainuddin Yahya and Mustafa Bakri. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Yeop, Muhamad Muhkriz and Tajudin, Muhammad Aiman and Hassan, Mohd Ikmal (2016) Smart and contemporary roof garden / Muhamad Muhkriz Yeop, Muhammad Aiman Tajudin and Mohd Ikmal Hassan. [Student Project] (Submitted)

Zahib, Mohd Zahidan and Hassan, Mohd Radzi (1992) Contamination control during the repair of hydraulic machinery / Mohd Zahidan Zahib and Mohd Radzi Hj Hassan. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Zaidi, Muhammad Alif Hafizi (2023) Automatic shoe cleaning machine / Muhammad Alif Hafizi Zaidi. [Student Project] (Unpublished)

Zaini, Ahmad Zahil (2022) Automated dustbin using Arduino / Ahmad Zahil Zaini. [Student Project] (Submitted)

Zainudin, Aiman Shafiq (2023) Automated ingredient mixer machine / Aiman Shafiq Zainudin. [Student Project] (Unpublished)

Zainudin, Muhammad Khairullah and Azhan, Muhammad Imran (2015) Fertigation system using IOT / Muhammad Khairullah Zainudin and Muhammad Imran Azhan. [Student Project] (Submitted)

Zambri, Luqman Hakim and Azizi, Muhammmad Ikhwan (2019) Robotic arm vehicle / Luqman Hakim Zambri and Muhammmad Ikhwan Azizi. [Student Project] (Submitted)

Zolkapali, Siti Norhana Fatehah (2017) Study on the optimum pressure controllability of PID tuning by using different tuning rules. [Student Project] (Unpublished)

Zool, Mohd Noor Hafiz Single phase inverter/charger converter. [Student Project] (Unpublished)

Zuedirmman, Aiman Uzair and Mohamad Sabri, Muhammad Syarifudin (2019) Industrial line follower for supplying materials / Aiman Uzair Zuedirmman and Muhammad Syarifudin Mohamad Sabri. [Student Project] (Submitted)

Zulfakri, Muhammad Iddin Harith and Ghazali, Muhammad Fariq and Sardi, Muhammad Izzuddin (2017) Developement of automatic cloth folding machine using LDR sensor / Muhammad Iddin Harith Zulfakri, Muhammad Fariq Ghazali and Muhammad Izzuddin Sardi. [Student Project] (Submitted)

Zulkafli, Abu Hanifa and Roslan, Ahmad Badiuzzaman (2015) Automatic pet food feeder / Abu Hanifa Zulkafli & Ahmad Badiuzzaman Roslan. [Student Project] (Unpublished)

Zulkanain, Muhammad Hariz and Mohd Afli, Muhammad Shafiq and Salleh, Mohamad Fahami (2016) Automatic loam soil machine / Muhammad Hariz Zulkanain, Muhammad Shafiq Mohd Afli and Mohamad Fahami Salleh. [Student Project] (Submitted)

Zulkifli, Muhammad Zharfan (2024) Development of HKS2Z - mini automatic hacksaw. [Student Project] (Unpublished)

Entrepreneurship Project

Albaro Kenidy, Emily Demmie and Kamlius, Leenard and Momin, Nur Alma Syamimi and Ya, Nur Amirah and Norazuah, Nur Sabrina and Mohd Shabri, Nursheilawati and B. Amra, Siti Noraini (2026) New product development for ThermoVision X. [Entrepreneurship Project] (Unpublished)

Yahya, Mohd Fazrydeen and Kamarul Zaman, Muhammad Syakir (2017) Electro-strip / Mohd Fazrydeen Yahya and Muhammad Syakir Kamarul Zaman. [Entrepreneurship Project] (Unpublished)

Yahya, Mohd Fazrydeen and Kamarulzaman, Muhammad Syakir The efficiency of the cabin (spray color) / Mohd Fazrydeen Yahya and Muhammad Syakir Kamarulzaman. [Entrepreneurship Project] (Unpublished)

Research Reports

Jaffar, Ahmed and Mahmud, Jamaluddin (2006) Development and improvement of the car seat polyurethane injection moulding process / Ahmed Jaffar and Jamaluddin Mahmud. [Research Report] (Unpublished)

Jerai, Fauziah and Ow, Chee Sheng (2011) Studying thermal performance of split-type air conditioners at building re-entrant via computer simulation / Fauziah Jerai and Ow Chee Sheng. [Research Report] Research Management Institute (RMI). (Unpublished)

Kasim, Jamaludin (Prof. Madya Dr.) (2002) Paper mill sludge as fillers in polypropylene thermoplastic composites / Jamaludin Kasim … [et al.]. [Research Report] (Unpublished)

Mansor, Wahidah and Abu Bakar, Ahmad Hairi and Rao, P. Nageswara and Kamaluddin, Mohd Uzir (2001) Development of an intelligent, multipurpose motion controller for manufacturing automation / Wahidah Mansor … [et al.]. [Research Report] (Submitted)

Miskon, Mohamad Taib and Jantan, Hamidah and Wan Chek, Wan Ahmad Khusairi (2016) Handheld devices 3D video streaming compression algorithm / Mohamad Taib Miskon, Hamidah Jantan and Wan Ahmad Khusairi Wan Chek. [Research Report] (Submitted)

Omar, Abdul Rahman (2011) Process optimization of stamping die using response surface methodology method / Abdul Rahman Omar … [et al.]. [Research Report] Research Management Institute (RMI). (Unpublished)