Items where Subject is "Heat"

Group by: Creators | Item Type
Number of items at this level: 94.

Article

A. N., Jannah and S. A., Halim (2012) Superconducting YBCO and BSCCO thin films prepared by pulsed laser deposition and post annealing / Jannah A. N. and Halim S. A. (2012) Journal of Academia, 2 (1). pp. 9-15. ISSN 2232-1519

Abdul Malek, Nur Syazwani and Rosman, Nurfarhana and Mahmood, Mohamad Rusop and Khusaimi, Zuraida and Asli, Noor Asnida (2020) Effects of storage temperature on shelf-life of mango coated with zinc oxide nanoparticles / Nur Syazwani Abdul Malek … [et al.]. (2020) Science Letters, 14 (2). pp. 47-57. ISSN (eISSN) 2682-8626

Lischer, Kenny and Digdaya Putra, Ananda Bagus Richky and Sahlan, Muhamad and Khayrani, Apriliana Cahya and Ginting, Mikael Januardi and Wijanarko, Anondho and Whulanza, Yudan and Pratami, Diah Kartika (2021) Heat transfer simulation of various material for polymerase chain reaction thermal cycler / Kenny Lischer … [et al.]. (2021) Journal of Mechanical Engineering (JMechE), 8 (2). pp. 27-37. ISSN (eISSN):2550-164X

Md Noor, Mohd Rahimie and Mohd Fauzi, Nur Syafiqah Hidayah and Masrom, Siti Nur Fadhilah and Abdul Malek, Mohd Azry and Mustapha, Muhammad Firdaus and Mohd Yasin, Ahmad Bukhari (2021) Graphing behaviour of heat transfer in terms of nusselt and reynolds / Mohd Rahimie Md Noor ...[et al.]. (2021) Journal of Computing Research and Innovation (JCRINN), 6 (2): 5. pp. 41-52. ISSN 2600-8793

Mohamed, Mazlan and Atan, Rahim and Abdullah, Mohd Zulkifly (2011) Three dimensional analysis using finite volume based CFD simulation to determine junction temperature on electronic components / Mazlan Mohamed, Rahim Atan and Mohd Zulkifly Abdullah. (2011) ESTEEM Academic Journal, 7 (1). ISSN 1675-7939

Mohd Yatim, Muyassarah Syahirah and Zakaria, Irnie Azlin and Roslan, Mohamad Fareez and Wan Mohamed, Wan Ahmad Najmi (2021) Heat transfer and pressure drop characteristics of hybrid Al₂O₃-SiO₂ / Muyassarah Syahirah Mohd Yatim …[et al.]. (2021) Journal of Mechanical Engineering (JMechE), 8 (2). pp. 145-159. ISSN (eISSN):2550-164X

Othman, Muhamad Fitri and Abdul Rahman, Nor Adila (2018) Study on the co-crystal formation of ibuprofen and oxalic acid via evaporation method / Muhamad Fitri Othman and Nor Adila Abdul Rahman. (2018) Malaysian Journal of Chemical Engineering and Technology (MJCET), 1. pp. 22-27. ISSN 2682-8588

Pezol, Nor Syafikah and Rahiman, Mohd Hezri Fazalul and Adnan, Ramli and Tajjudin, Mazidah (2021) Temperature control of essential oil extraction process using second generation of commande robuste d’ordre non entier (CRONE-2) / Nor Syafikah Pezol … [et al.]. (2021) Journal of Electrical and Electronic Systems Research (JEESR), 19: 7. pp. 178-184. ISSN 1985-5389

Syed Yahya, Syed Yusainee (1998) Effects of the processing parameter on the fibre length and physical properties of short glass reinforced TPNR composite / Syed Yusainee Syed Yahya. (1998) GADING Jurnal ITM Cawangan Pahang, 4 (1): 3. pp. 27-34. ISSN 0128-5599

Wan Mohamed, Wan Ahmad Najmi and Suhaimi, Mohd. Azeem and Zakaria, Irnie Azlin and Wan Hamzah, Wan Azmi (2021) Electro-Thermal characteristics of hybrid tioz-sioz nanofluid coolants in an electrically-active system / Wan Ahmad Najmi Wan Mohamed … [et al.]. (2021) Scientific Research Journal, 18 (1). pp. 209-225. ISSN 2289-649X

Zahari, Norhayaty and Ahmad, Mohd Rozi and Raja Azidin, Raja Mohammed Firhad and Yahaya, Ridwan and Che Muhamed, Ahmad Munir and Yahya, Mohamad Faizul (2021) Thermoregulatory responses after uphill running while wearing enforcement personnel clothing / Norhayaty Zahari ... [et al.]. (2021) Scientific Research Journal, 18 (1). pp. 143-160. ISSN 2289-649X

Conference or Workshop Item

A, Asmadi and A. H, Nurbaiti and N, Ali and A. R., Hassan and R. M., Yunus (2008) Preliminary study of asymmetric ultrafiltration (UF) membrane: the effect of coagulation bath temperature (CBT) and forced convection resident time (FCRT) on the permeability and morphology of UF polysulfone membrane / Asmadi, A. …[et al.]. (2008) In: UNSPECIFIED.

A.Z., Hazlina and H.M., Ghazali (2004) Transesterification of palm oil by an immobilized rhizomucor miehei lipase / A.Z. Hazlina and H.M. Ghazali. (2004) In: STSS 2004: Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Amin, Mohd Misbahul and Ghazali, Che Mohd Ruzaidi and Amin, Neelofar (2008) Hot corrosion behaviour of austenitic steel-308 in chloride salts / Mohd Misbahul Amin, Che Mohd Ruzaidi Ghazali and Neelofar Amin. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3 – 4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Amin, Mohd. Misbahul and Ghazali, Che Mohd. Ruzaidi and Amin, Neelofar (2008) Hot corrosion behaviour of austenitic steel-308 in chloride salts / Mohd. Misbahul Amin, Che Mohd. Ruzaidi Ghazali and Neelofar Amin. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research, 3 – 4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Deraman, Rasdi and Purwadaria, Sunara (2008) Effect of retrogression and re-ageing treatment on stressed component of wrought 6061 aluminium alloy / Rasdi Deraman and Sunara Purwadaria. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

Ibrahim, Siti Noramirah and Mohamad, Ahmad Qushairi and Lim, Yeou Jiann and Shafie, Sharidan and Zakaria, Muhammad Najib (2021) Free convection flow of Brinkman type fluid through an cosine oscillating plate / Siti Noramirah Ibrahim ... [et al.]. (2021) In: e-Proceedings of the 5th International Conference on Computing, Mathematics and Statistics (iCMS 2021), 4-5 August 2021. (Submitted)

Jumahat, Aidah and Mahmud, Jamaluddin and M., Sani and M., Azwa (2004) Ceramic powders compaction process / Aidah Jumahat … [et al.]. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Md Ishak, Habsah and Amin, M.Misbahul and Derman, Nazree and Ahmad, Khairel Rafezi (2008) High temperature corrosion behaviour of steel with a carbonate deposit at 1123k / Habsah Md Ishak … [et al.]. (2008) In: Proceedings STSS 2008, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

Mohd Helmi, Ahd Syarifuddin (2010) The effect(s) of mask alignment to P-N junction / Ahd Syarifuddin Mohd Helmi. (2010) In: UNSPECIFIED. (Unpublished)

R., Rafeadah and S., Rahim and S., Slamah and H., Shaharuddin (2006) Chemical properties of heat-treated rubberwood / Rafeadah R. …[et al.]. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Sarma, Wartono and Hashim, lshak and Zulkifle, Ahmad Kamal (2004) The onset of steady marangoni convection in a rotating fluid layer with a prescribed heat flux at its lower boundary / Wartono Sarma, lshak Hashim and Ahmad Kamal Zulkifle. (2004) In: STSS 2004: Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Z., Habibah and L.N., Ismail and R.A., Bakar and M., Rusop (2012) Influence of heat treatment on the properties of MgO thin films as dielectric layer / Habibah Z. ... [et al.]. (2012) In: 2011 IEEE Student Conference on Research and Development, 19-20 December 2011, Cyberjaya, Malaysia. (Submitted)

Thesis

Abdul Latiff, Anisah (2020) Puncture resistance and characterization of coated natural rubber latex (NRL) ultra high modulus polyethylene (UHMPE) upon heat ageing / Anisah Abdul Latiff. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Ahmad, Afiqah (2020) The effect of building envelope performance design using the Overall Thermal Transfer Value (OTTV) for non-residential building: a comparative study / Afiqah Ahmad. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Ahmad Manshor, Zulkifli (2006) A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Azizan, Muhamad Firdaus (2009) Mechanical behaviour of stainless steel grade 304 (SS304) under different heat treatment conditions / Muhamad Firdaus Azizan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ismail, Nurlaila (2011) Auto-regressive with exogenous input (ARX) modeling on heating process in steam distillation essential oil extraction system / Nurlaila Ismail. (2011) Masters thesis, thesis, Universiti Teknologi MARA.

Mat Hussin, Mohd Shahidin (2009) Heat pipes as an efficient heat transfer device / Mohd Shahidin Mat Hussin. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohd Noor, Ahmad Hariss Hakimmi (2021) Heat and mass transfer analysis on flow of Williamson nanofluid with thermal and velocity slips: Buongiorno model / Ahmad Hariss Hakimmi Mohd Noor. (2021) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Morris, Freda (2015) Heat transfer and optimum thermal resistance of bulk insulation for naturally ventilated building in tropical climates / Freda Morris. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Rahmad, Siti Najihah (2022) Ductility improvement of additively manufactured Ti6AL4V alloy through heat treatment / Siti Najihah Rahmad. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Said, Che Mohamad Som (2014) Failure of thick rubber vulcanizates by blowout / Che Mohamad Som Said. (2014) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Ab Rahman, Syahira Farhana (2013) Temperature dependant of monoethanolamine for carbon nanotubes growth via floating catalyst method / Syahira Farhana Ab Rahman. (2013) [Student Project] (Unpublished)

Abdul Aziz, Fatmawati (2004) Properties of particleboard from juvenile Akasia (Acacia mangium) at 550 kg/m3 and 650 kg/m3 with 8% resin / Fatmawati Abdul Aziz. (2004) [Student Project] (Unpublished)

Abdul Muttalib, Malissa (2009) Temperature dependent of photoluminescence spectroscopy on nanostructured porous silicon / Malissa Abdul Muttalib. (2009) [Student Project] (Unpublished)

Abdullah, Ahmad Nurul Aswad (2004) Properties of particleboard from Hura crepitans at 450 kg/m3 with 8%, 10% and 12% resin / Ahmad Nurul Aswad Abdullah. (2004) [Student Project] (Unpublished)

Ali, Farah Adibah (2010) Effect of oxide type and thickness towards NMOS I-V characteristics / Farah Adibah Ali. (2010) [Student Project] (Unpublished)

Awang, Mohd Razani (2011) Generation of typical meteorological year weather data of temperature for Klang Valley / Mohd Razani Awang. (2011) [Student Project] (Unpublished)

Azman, Muhammad Azillah (2012) The investigation of phases and conductivity of lithium chromium oxide (LiCr02) / Muhammad Azillah Azman. (2012) [Student Project] (Unpublished)

Azman, Syahila (2021) A study of onset on benard-marangoni convection With internal heat generation / Syahila Azman. (2021) [Student Project] (Unpublished)

Badrul Hisham, Nadia Syahira (2017) The effects of ambient temperature on physiological parameters among palm oil mil workers in Selancar, Pahang / Nadia Syahira Badrul Hisham. (2017) [Student Project] (Unpublished)

Bashiron, Nur Hafiza (2015) The fabrication and characterization of Nd doped SiO2P2O5 glass by the sol gel route / Nur Hafiza Bashiron. (2015) [Student Project] (Unpublished)

Che Amaran, Nuzuiza (2008) The effect of sintering process on I-V properties of RE123 ceramic utilizing hot spot / Nuzuiza Che Amaran. (2008) [Student Project] (Unpublished)

Che Hassan, Azhari (1987) Perbandingan beban haba yang direkabentuk dengan beban haba sebenarnya di pejabat bendahari ITM, Shah Alam / Azhari Che Hassan. (1987) [Student Project] (Unpublished)

Che Manaf, Nurul Nadia (2010) Effects of annealing temperature and time on the P-Type silicon wafer with Boron & Phosphorus dopants / Nurul Nadia Che Manaf. (2010) [Student Project] (Unpublished)

Esa, Nurhazirah (2013) Characterization of modified silicone - dammar resin as coating after thermal process / Nurhazirah Esa. (2013) [Student Project] (Unpublished)

Ghazali, Zatul Izzati Farahiyah (2012) Evaluation of solar heat gain and day lighting through building envelope in Malaysia : a case study of UiTM test cell / Zatul Izzati Farahiyah Ghazali. (2012) [Student Project] (Unpublished)

Hussin, Diana (2006) Three-layer particleboard from Mahang Gajah (Macaranga gigantea) / Diana Hussin. (2006) [Student Project] (Unpublished)

Idrais, Norzariza (2006) Properties of three layer particleboard from Gliricidia sepium / Norzariza Idrais. (2006) [Student Project] (Unpublished)

Ismail, Mohd Farouk Afizal (2007) The durability of HoBa2Cu3O7-δ and HoBa2Cu3O7-δ (with elemental substitution- Sr at Ba site of the ceramics with the hot spot phenomena) / Mohd Farouk Afizal Ismail. (2007) [Student Project] (Unpublished)

Jaafar, Mohd Azli (2004) Properties of particleboard from juvenile Acacia mangium at 550 kg/m3 with 8% and 12% resin / Mohd Azli Jaafar. (2004) [Student Project] (Unpublished)

Jabir, Hartati (2012) The effect of orientation and properties of tinted solar control on conductive heat gain through windows / Hartati Jabir. (2012) [Student Project] (Unpublished)

Jaludin, Aziela (2009) Thermal behaviour study of Malaysian bituminous coal and refuse derived fuel blends by pyrolysis via thermogravimetric analysis / Aziela Jaludin. (2009) [Student Project] (Unpublished)

Jamaluddin, Nor Aisyah (2010) Effect of annealing temperature and time on boron and phosphorus spin-on dopant in n-type silicon wafer / Nor Aisyah Jamaluddin. (2010) [Student Project] (Unpublished)

Jamaludin, Muhaimin Mustaqim (2016) Investigation of turning condition based on minimum energy consumption / Muhaimin Mustaqim Jamaludin. (2016) [Student Project] (Unpublished)

Jumah, Abdul Rahim (2008) Indoor air quality and thermal comfort investigation in secondary school classroom / Abdul Rahim Jumah. (2008) [Student Project] (Unpublished)

Kamisan, Muhammad Noor Shafee (2019) Interfacial tension prediction of silica nanoparticle addition at elevated temperature using dynamic simulation. (2019) [Student Project] (Unpublished)

Lodz, Noor Najia (2009) Conductive heat transfer for glazed roofing material at different pitch angle in Malaysia / Noor Najia Lodz. (2009) [Student Project] (Unpublished)

Mahmud, Abbas (2011) AC impedance measurement of zinc oxide with different heat treatment / Abbas Mahmud. (2011) [Student Project] (Unpublished)

Mahmud, Zaidatul Salwa (2010) Evaluation of heat transfer through wall in Malaysia- a case study of UiTM test cell / Zaidatul Salwa Mahmud. (2010) [Student Project] (Unpublished)

Mohamad Salleh, Mohamad Shahrizal (2010) Effect of Ca substitution on high temperature resistivity of Eu₁₋ₓCaₓBa₂Cu₃O₇₋ᴕ ceramics(x=0.0,0.1,0.5) / Mohamad Shahrizal Mohamad Salleh. (2010) [Student Project] (Unpublished)

Mohamad Samirun, Noor Baizura (2009) Oxygen sensing properties and hot spot temperature variation of HoBa₂22Cu₃307-ᵟ ceramic / Noor Baizura Mohamad Samirun. (2009) [Student Project] (Unpublished)

Mohamed, Fatimah (2006) The evaluation of flat plate solar cooker / Fatimah Mohamed. (2006) [Student Project] (Unpublished)

Mohamed, Nur Saidah (2013) AC impedance of LiNi₀.₇Co₀.₂Al₀.₁O₂ and LiCo0₂ at room temperature / Nur Saidah Mohamed. (2013) [Student Project] (Unpublished)

Mohamed Tajuddin, Nurulain (2010) Structural studies of tellurite glass system of (90ᵪ)TeO₂-10Nb₂O₅-(x)ZnO by fourier transform infrared (FTIR) spectroscopy / Nurulain Mohamed Tajuddin. (2010) [Student Project] (Unpublished)

Mohd, Hafizudin (2004) Properties of particleboard from Kelempayan (Anthocepalus chinensis) at 450 kg/m3 with 8%, 10% and 12% resin / Hafizudin Mohd. (2004) [Student Project] (Unpublished)

Mohd Hanim, Putri Nur Amalina (2012) The effect of tinted window on daylighting and indoor temperature in building / Putri Nur Amalina Mohd Hanim. (2012) [Student Project] (Unpublished)

Mohd Hassan, Anis Fazlinda (2013) Effect of annealing temperature on undoped zinc oxide and aluminium doped ZnO by sol-gel spin coating / Anis Fazlinda Mohd Hassan. (2013) [Student Project] (Unpublished)

Mohd Helmi, Ahd Syarifuddin (2010) The effect(s) of mask alignment to p-n junction / Ahd Syarifuddin Mohd Helmi. (2010) [Student Project] (Unpublished)

Mohd Husni, Muhamad Arif Fahmi (2011) Design and characterization of a thermooptic polymer switch based on directional coupler structure / Muhamad Arif Fahmi Mohd Husni. (2011) [Student Project] (Unpublished)

Mohd Nasir, Mohd Narizee (2006) Oxygen sensitive hot spot on ErBa₂Cu₃0₇₋δ ceramics / Mohd Narizee Mohd Nasir. (2006) [Student Project] (Unpublished)

Mohd Radzi, Muhammad Ridhuan Shahriman (2014) Er-Yb co-doped SiO2-P2O5 monolithic nano composite synthesized by the sol gel route / Muhammad Ridhuan Shahriman Mohd Radzi. (2014) [Student Project] (Unpublished)

Mohd Yusof, Mohd Firdaus (2006) Attic ventilation and thermal performance of metal deck roof / Mohd Firdaus Mohd Yusof. (2006) [Student Project] (Unpublished)

Mustaffa, Mohamad Syahiran (2010) The effect of laminating pressure on the physical properties of multilayer low temperature co-fired ceramics (LTCC) substrate / Mohamad Syahiran Mustaffa. (2010) [Student Project] (Unpublished)

Omar, Umi Atiqah (2018) Thermal comfort assessment in elderly care center and its health effect / Umi Atiqah Omar. (2018) [Student Project] (Unpublished)

Pg Mohd Yassin, Dk Nooriah (2009) Energy performance of a test building with roof and Ceiling insulation during office hours cooling / Dk Nooriah Pg Mohd Yassin. (2009) [Student Project] (Unpublished)

Ramly, Nordiana Nabilla (2010) The effect of heating time in sulfonated poly ether ether ketone chitosan (SPEEK-CS) based by microwave irradiation technique / Nordiana Nabilla Ramly. (2010) [Student Project] (Unpublished)

Rozali, Salfariza and Puteh, Siti Sarah (2004) Temperature measurement using transistor as a sensor / Salfariza Rozali and Siti Sarah Puteh. (2004) [Student Project] (Unpublished)

Rukman, Nusoibah Naahidhah (2008) Processing and thermal analysis of palm oil and dye filled polypropylene / Nusoibah Naahidhah Rukman. (2008) [Student Project] (Unpublished)

Samin, Nur Khairani (2008) Effect of annealing temperature on the surface morphology of titanium dioxide thin films prepared by sol-gel method / Nur Khairani Samin. (2008) [Student Project] (Unpublished)

Shamsul, Quratula'in Syahiirah (2017) Effect of sintering temperature on microstructure and humidity sensing properties of ZrO2-TiO2 for humidity sensor / Quratula'in Syahiirah Shamsul. (2017) [Student Project] (Unpublished)

Sidek, Rafidah (2004) Properties of particleboard from juvenile Acacia mangium at 650 kg/m3 with 8% and 12% resin / Rafidah Sidek. (2004) [Student Project] (Unpublished)

Sukur, Noordiana (2005) Pre liminary study on board from oil palm trunk, (elais guineenssiJacq), with density of 600 kg/ m3 at 5% phenol formaldehyde resin / Noordiana Sukur. (2005) [Student Project] (Unpublished)

Sulaiman, Siti Nurul Shahmimie (2017) Effect of ZrO2 on the structure, hardness and humidity sensing properties of TiO2-ZrO2 / Siti Nurul Shahmimie Sulaiman. (2017) [Student Project] (Unpublished)

Tuan Coob, Tuan Idayu (2005) Properties of particleboard from juvenile Acacia mangium at 800 kg/m3 with 6 %,8 % and 10 % UF resin / Tuan Idayu Tuan Coob. (2005) [Student Project] (Unpublished)

Wan Aziz, Wan Mohamad Rosihan (2010) Investigate effect of the scaling on MOS capacitor using capacitance measurement / Wan Mohamad Rosihan Wan Aziz. (2010) [Student Project] (Unpublished)

Yaacob, Yanti (2009) Isolation of alkaline thermophilic bacteria from Hulu Langat hot springs for protease production / Yanti Yaacob. (2009) [Student Project] (Unpublished)

Yahya, Mohd Affendi and Mat Daud, Zulkifli and Yaacob, Mohd Yusaini (1995) Hubungan konduktiviti oleh Eddy Current dengan logam yang telah dirawatan haba / Mohd Affendi Yahya, Zulkifli Mat Daud and Mohd Yusaini Yaacob. (1995) [Student Project] (Unpublished)

Yusof, Nurul Fatehah (2013) Effects of Prᶟ substitution on oxygen sensing properties of Eu(Ba₁-ₓPrₓ)₂Cu₃0₇₋δ (x = 0.00 - 0.15) ceramic rods using hot spot phenomenon / Nurul Fatehah Yusof. (2013) [Student Project] (Unpublished)

Zakaria, Muhamad Shahril (2011) Thermaly Stimulated Current (TSC) in porous silicon / Muhamad Shahril Zakaria. (2011) [Student Project] (Unpublished)

Zulkiffeli, Mohd Faizal (2006) Properties of three layer particleboard using urea formaldehyde resin from empty fruit bunch / Mohd Faizal Zulkiffeli. (2006) [Student Project] (Unpublished)

Research Reports

Abdullah, Bulan and Jaffar, Ahmed and Rashiddy Wong, Freddawati and Ab Rashid, Amirul and Ramli, Abdullah and Talari, Mahesh Kumar and Syarifuddin Djalil, Syarif Junaidi (2013) New heat treatment technique (tempering-austempered in single treatment) for matrix transformation and mechanical properties of ductile iron / Bulan Abdullah … [et al.]. (2013) [Research Reports] (Unpublished)

Yaakob, Yusli and Pin, Chiang Ee and Bahari, Peridah (2007) The application of finite volume methods to study the natural convection phenomena in a 2d rectangular cavity / Yusli Yaakob, Chiang Ee Pin and Peridah Bahari. (2007) [Research Reports] (Unpublished)

This list was generated on Sun Jul 20 02:26:20 2025 UTC.