Items where Subject is "Engineered wood. Fiberboard, particle board, etc."

Library of Congress Subject Areas (1)
- T Technology (4)
  - TS Manufactures (4)
    - Engineered wood. Fiberboard, particle board, etc. (262)

Group by: Creators | Item Type

Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z

Number of items at this level: 262.

A

Effect of strand sizes and resins on oriented strand board using kelempayan / Muhamad Amir Hamzah A.Rahim. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard from dried leaves and eucalyptus pellita / Muhamad Haziq Ab Karim. (2019) [Student Project] (Unpublished)

Effect of the density on the properties of particleboard from Kenaf core and Kelempayan (Neolamarckia spp.) particles / Ammar Imran Ab Malek. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Life cycle assessment (LCA) of wood plastic composite (WPC): Identifying end-of-life option / Zakiah Hani Ab Rashid. (2019) [Student Project] (Unpublished)

Physical and mechanical properties of particleboard made from selected fast-growing species using different resin content: a review / Hannani Abd Haris. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of cement boards from different percentage of sodium silicate (na2si03) and oil palm trunk (opt) layers / Azhari Abd Kadir. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of hybrid particleboard made from admixture material of Kelempayan, durian husk and oil palm frond in relation to different resin content / Norani Shuhada Abd Kadir. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

The effects of tree portion on extractive content of Kelempayan (Neomalarckia cadamba sp.) wood / Nurfaizah Abd Latib, Nur Sakinah Mohamed Tamat and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Mechanical and physical properties of particleboard from two different fast growing species / Ahmad Razmi Abdul Manan. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Strength properties of sandwich panel made from medium density fiberboard and corrugated paperboard / Ahmad Basirun Abdul Rashid. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Design of stacking oriented coffee table/ Muhammad Syafiq Abdul Razak. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Aging effect of urea formaldehyde on particleboard with different resin content (Endorspermum sp.) / Nuraisyah Abdul Razak. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical properties of bamboo strip composite by different portion of bambusa blumeana for archery limb production / Mohammad Hasif Abdull Latif. (2016) [Student Project] (Unpublished)

Mechanical and physical properties of particleboard from plywood edge trimming / Nor Ayu Amira Abdull Wahab. (2019) [Student Project] (Unpublished)

Design and simulation electric skateboard / Muhammad Iqbal Haziq Abdullah. (2022) [Student Project] (Unpublished)

The evaluation and comparison of properties of particleboard made from Kenaf / Nor Shuhada Abdullah. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from Kenaf (hibiscus cannabinus) core and acacia (acacia mangium) / Azizul Arifin Abdullah Khir. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from kenaf (hibiscus cannabinus l.) core and acacia (acacia mangium) wood / Azizul Arifin Abdullah Khir, Jamaludin Kasim and Wan Mohd Nazri Wan Abd Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Nail withdrawal properties on hybrid lamination board made from Sesendok (Endospermum Diadenum) and oil palm trunk (Elaeis Guineensis) / Siti Aishah Abu Bakar. (2016) [Student Project] (Unpublished)

Multipurpose key storage / Muhammad Aliff Ashraf Adnan. (2019) [Student Project] (Unpublished)

MODAT study table from particleboard / Ashree Afazal. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Particleboard properties from Mahang Gajah (Macarranga gigantea) particles / Nurrohana Ahmad, Jamaludin Kasim and Nafizah Hassan. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

A preliminary study on the properties oil palm board: Effect of resin content / Nurrohana Ahmad … [et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 47-53. ISSN 0128-5599

Sustainable design: exploration of recycled materials physical forms in furniture studies / Nurul ‘Ayn Ahmad Sayuti, Shahriman Zainal Abidin. (2011) [Research Reports] (Unpublished)

Sz shape side table from kelempayan wood (neolamarckia cadamba) / Hadi Shapii Ahmad Shapi'i. (2019) [Student Project] (Unpublished)

Effects of density and press temperature on dried leaves particleboard / Nurizma Zulaila Akmen. (2018) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of screw types on screw withdrawal and basic strength of particleboard / Nur Wafa Amalina Amali. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Kinetic and isotherm studies of copper(II) adsorption on potassium hydroxide treated kenaf (hibiscus cannabinus L.) fiber / Nur Syafiqah Amir Hanafiah. (2014) [Student Project] (Unpublished)

Properties of acacia mangium wood cement board in relation to particle size and curing time / Nur Aza Farahin Amirruddin. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Comparison of butt joint effects in Profiled Steel Sheet Dry Board (PSSDB) wall panel with door opening / Samsul Izwan Anwar. (2004) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from coconut coir and empty fruit bunch (EFB) / Rusilma Arnie. (2016) [Student Project] (Unpublished)

Multi-purpose coffee table / Annissa Nabila Farhana Asmarah. (2022) [Student Project] (Unpublished)

Properties of particleboard from wild acacia mangium: effect of particle size and board thicknesss / Siti Hazimah Awal Ud-Din. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Foldable laptop table / Muhammad Azman Azamy. (2019) [Student Project] (Unpublished)

Lichtenberg design on side table using acacia wood / Muhammad Toha Azmi. (2019) [Student Project] (Unpublished)

B

Wear pattern of various router bit material in cutting rubberwood medium density fibreboard / Muhammad Kamal Ariffin Badrun. (1999) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Adjustable laptop table with DIY concept / Zamri Buhari, Nur Hannnani Abd Latif and Shaikh Abdul Karim Yamani Zakaria. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

C

Properties of cement board made from various sizes of oil palm trunk strands / Nurnabilah Hanee Che Ab Rahim. (2016) [Student Project] (Unpublished)

Cement board filled with aged oil palm trunk strands: Effect of board densities and strand sizes / Nurnabilah Hanee Che Ab Rahim and Nor Yuziah Mohd Yunus. (2021) Gading Journal of Science and Technology, 4 (2). pp. 50-57. ISSN e-ISSN: 2637 – 0018

Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Muhamad Nasrulrahman Che Kar. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Coffee table with sliding book case / Che Mohamad Azrul Che Lah. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Coffee table with sliding book case / Che Mohamad Azrul Che Lah and Norashikin Kamarudin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Mechanical and physical properties on oriented strand board from kelempayan wood/ Mohd Aizuddin Che Rosli. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Sliding mirror storage box from block board / Mohamad Hashimie Che Soberi. (2019) [Student Project] (Unpublished)

The properties of reconstituted panel manufactured from oil palm fronds / Chen Fung Woo and Suhaimi Muhammed. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 7. pp. 46-53. ISSN 0128-5599

D

Properties of medium density fiberboard (MDF) from fast growing species in Pakistan / Nabilatul Ezzatie Dainal @ Zainal. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

The effect of layers and combinations on strength and physical properties of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT) / Norzatul Daut. (2005) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Properties of nitrocellulose lacquer on plywood / Nurul Nadzirah Dildar Mohamad. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

F

Multipurpose cuboid chair by using blockboard / Norazwanis Aida Fauzi. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Muhammad Adib Firdaus. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

G

Finishing: traditional and modern technique / Munirah Ghazali. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical and physical properties of particleboard made from acacia mangium species / Nurul Halimah Ghazali. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

H

Properties of particleboard from Buluh Minyak (Bambusa vulgaris) / Halimatulsaadiah Halim. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The effect of different filler loading and types of filler on the mechanical and physical properties of wood plastic composite from sapium baccatum (Ludai sp.) / Nurul Najwa Hamis. (2019) [Student Project] (Unpublished)

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Fabrication of miniature foldable iron board / Muhammad Hadzrey Hasmi. (2022) [Student Project] (Unpublished)

Product development of mini pantry cupboard from medium density fibreboard / Noor Hazaruliza Hassan. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

The potential of cardboard with plaster of paris in creating an artwork and commercial product / Zulkarnian Hassan and Siti Maryam Ali Yasin. (2013) [Research Reports] Physical copy is available on shelf (Unpublished)

Reprosave Enterprise / Hapizah Hohpin ... [et al.]. (1998) [Entrepreneurship Project] (Unpublished)

Homogenous particleboard properties of Petai Belalang (leucaena leucocephala) wood in relation to resin content and particle size/ Muhammad Farhan Husin. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

I

Assessment of mechanical properties based on different density of particleboard from sentang spp (azadirachta excelsa) / Siti Anis Aniha Isa. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Review on effects different modifier towards formaldehyde emission, physical and mechanical properties of melamine urea formaldehyde and urea formaldehyde bonded particleboard / Mohammad Farhan Iskandar. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard made from admixture materials of kelempayan (neolamarckia cadamba), mixed species of durian husk and oil palm frond (elaeis guineensis jacq.) in relation to density / Izzah Ismadi. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Physical and mechanical properties of hybrid plywood from coconut and rubberwood veneer bonded with different adhesive / Mohammad Fahamy Ismail. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Audio visual cabinet with storage function / Mohd Asri Ismail. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Coffee table from hevea melamine / Muhammad Syarif Ismail. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Evaluation on the physical and mechanical properties of particleboard from Batai (Paraserianthes falcataria) / Noor Rehan Ismail. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Kenaf core particleboard based on physical, mechanical and acoustic properties / Nur ‘Izzati Ismail. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

J

Oriented strand board from acacia mangium and neolamarckia cadamba (kelempayan) in relation to temperature and pressure / Farah Umirah Jamal Abdul Nasir. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Sodium hydroxide treatment on natural fibers for better fiber morphology: A review / Nor Farhana Jasmi, Nur Farahin Yusoff and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Finishing properties on particleboard from Gliricidia sepium / Nur Ain Jemain. (2013) [Student Project] (Unpublished)

Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard produced from admixture of acacia mangium and sentang (azadirachta excelsa) at different particle size / Shuhaila Johar. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

The effect of sealant as a finishing on a wood panel (plywood) / Shuhaili Johar. (2013) [Student Project] Digital copy is available in CD (Unpublished)

Effect of sealant on some finishing properties of commercial plywood / Shuhaili Johar, Shaikh Abdul Karim Yamani Zakaria and Norhafizah Rosman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard from admixture Petai Belalang (leucaena leucocephala) and Kenaf core (hibiscus cannabinus) / Khairul Azhar Johari. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from admixture of petai belalang (leucaena leucocephala) and kenaf core (hibiscus cannabinus l.) particles / Khairul Azhar Johari, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard made from acacia species: effects of resin content and hot press temperature / Nur Atiqah Nabilah Johari. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of neolamarckia cadamba plywood made with phenol formaldehyde (PF) resin / Siti Kamilah Junaidi. (2016) [Student Project] (Unpublished)

K

Keberkesanan ujian tanpa musnah terhadap sifat kenyal papan tartal berorientasi (OSB) menggunakan perambatan gelombang ultrasonic / Azman K … [et al.]. (2004) In: STSS 2004 : Sains dan Teknologi 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Compact book rack made from kelempayan (neolamarckia cadamba) and blockboard/ Sadam Kahar. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard produce from hybrid of Ludai and Kelempayan / Nur Mardiatul Fitriah Kamaruddin. (2019) [Student Project] (Unpublished)

Mechanical and physical properties of particleboard made from oil palm empty fruit bunch / Mohamad Kamal Kamarudin. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Oriented strand board side table / Kamilia Liyana Kamaruzaman. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of three-layer particleboard from rubberwood and leucaena leucocephala / Khairul Azelan Kapli. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Effects of particle sizes, wood to cement ratio and chemical additives on the properties of sesendok (Endospermum Diadenum) cement-bonded particleboard / Jamaludin Kasim ... [et al.]. (2010) Scientific Research Journal, 7 (2). pp. 57-65. ISSN 1675-7009

Properties of three layer muf particleboard from bamboo (Gigantochloa Scortechinii) / Jamaludin Kasim. (2003) Universiti Teknologi MARA Cawangan Pahang, 1,2 (8). pp. 1-4. ISSN 0128-5599

Properties of wood plastic composites (Wpc) from Batai Spp. (Paraserianthes Falcataria) / Jamaludin Kasim … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Effects of varying particle size, resin and wax content on the properties of homogenous melamine urea formaldehyde particleboard from bamboo (Gigantochloa scortechinii) / Jamaludin Kasim, Abd. Jalil Ahmad dan Shaikh Abdul Karim Yamani. (2004) In: Prosiding KONAKA Konferensi Akademik 2004, 17-19 Disember 2004, Impiana Beach Resort, Cherating, Kuantan.

Properties of homogenous muf particleboard from bamboo (gigantochloa scortechinil) / Jamaludin Kasim and Abdul Jalil Ahmad. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Properties of melamine urea formaldehyde particleboard produced from Buluh Semantan (gigantochloa scortechinii) / Jamaludin Kasim, Abdul Jalil Ahmad and Shaikh Abdul Karim Yamani. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Properties of three-layer melamine urea formaldehyde particleboard from bamboo / Jamaludin Kasim … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Effect of resin particle size and wax content on the properties of oil palm board / Jamaludin Kasim … [et al.]. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3-4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Effect of resin particle size and wax content on the properties of oil palm board / Jamaludin Kasim …[et al.]. (2008) In: Proceedings STSS 2008, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Jamaludin Kasim …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Some selected properties of bamboo thermoplastic composite: Influence of particle size, filler loading and maleated anhydride polypropylene addition / Jamaludin Kasim …[et al.]. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 126-134. ISSN 0128-5599

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Effects of bamboo density and chemical properties on the properties of particleboard produced from Giganfochloa Scortechinii / Jamaludin Kasim and Abd. Jalil Hj. Ahmad. (2005) Jurnal Gading, 9 (1). pp. 91-100. ISSN 0128-5599

Effects of particle sizes, resin content and board densities on the properties of phenol formaldehyde particleboard from oil palm trunk particles / Jamaludin Kasim ... [et al.]. (2010) Scientific Research Journal, 7 (1). pp. 1-12. ISSN 1675-7009

Effects of particle sizes, resin content and board density on properties of Sesendok particleboard / Jamaludin Kasim … [et al.]. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 1-9. ISSN 0128-5599

Properties of urea-formaldehyde particleboard from particles of mixed timber species / Jamaludin Kasim, Ahmad Fauzi Othman and Shaikh Abdul Karim Yamani. (2005) Jurnal Gading, 9 (1). pp. 17-22. ISSN 0128-5599

Mechanical and dimensional properties of bamboo (Gigantochloa Scortechinii) fiber - thermoplastic composite / Jamaludin Kasim, Veronica Sintan and Abd. Latif Mohmod. (2005) Jurnal Gading, 9 (1). pp. 131-138. ISSN 0128-5599

Mechanical and physical properties of araucaria fibre-polypropylene composite / Jamaludin Kasim, Wan Nazri Wan Abd Rahman and Suriana Husin. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 1-9. ISSN 0128-5599

Manufacture of melamine urea formaldehyde particleboard from hujan panas (croton argyratus) / Jamaludin Kasim … [et al.]. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 7. pp. 75-82. ISSN 0128-5599

Effects of resin content, wax addition and particle sizes on the properties of eight year-old Petai Belalang (Leuceana Leucocephala) particleboard / Jamaludin Kasim … [et al.]. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 31-37. ISSN 0128-5599

Effect of tannin addition on the mechanical and physical properties of urea formaldehyde board: a review / Nurul Syahira Khabarin. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

DIY console table / Amirun Rafiq Khairul Anuar. (2019) [Student Project] (Unpublished)

Properties of medium density fiberboard (MDF) from sumble wood / Muhammad Hazwan Khalid. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard from leuceana leucocephala wood/ Noor Zaliani Khozan. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

L

Properties of three layer particleboard from Batai spp (paraserianthes falcataria) / Hazwani Lias. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

M

Oriented strand board from rubberwood and juvenile sentang / Suffian, M … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of bio-composite product from acacia strand and coconut veneer / Siti Nadrah M. Omar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of rice husk particleboard for exterior use / Nur Liyana Aifa Mahammad Asri. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The properties of alkaline- treated kenaf particleboard for exterior applications / Nur Liyana Aifa Mahammad Asri. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical and physical properties of particleboard from untreated and treated kenaf particles / Nur Liyana Aifa Mahammad Asri … [et al.]. (2019) Scientific Research Journal, 16 (1). pp. 60-76. ISSN 2289-649X

Screw withdrawal properties of particleboard made from batai (Paraserianthes falcataria) species / Safura Mahat. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of single layer particleboard from oil palm trunk particles / Siti Zalifah Mahmud …[et al.]. (2009) In: UNSPECIFIED.

Water resistance particleboard from weathered oil palm trunk / Fatihah Mamat. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Screw-withdrawal properties of batai (Parensenthes falcataria) particleboard / Safura Mamat, Nurrohana Ahmad and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density / Mazlinda Marzuki. (2015) [Student Project] (Unpublished)

Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of oriented strand board made from banana pseudo stem (Musa acuminate colla (AA Group) cv. 'Lacatan') / Abdul Hadi Masod. (2013) [Student Project] (Unpublished)

Properties of particleboard from leucaena leucocephala and acacia mangium/ Maznera Mat Yaakob. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Multipurpose table kids / Zulkhanain Mat Zain and Norhafizah Rosman. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from neolamarckia cadamba (kelempayan) / Ahmad Afiq Mat Zlan. (2014) [Student Project] (Unpublished)

Properties of particleboard from sugarcane bagasse in relation to board density and resin content / Mazaihan Izzat Mazlan. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Multifunction bookshelves combine with table study and chair / Mohd Amar Md Aliudin, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: UNSPECIFIED.

Mechanical and physical properties of wood plastic composite made from hybrid coconut and kenaf fiber / Syahirah Nur Syazwanie Md Amin. (2019) [Student Project] (Unpublished)

A simple storage chair / Muhamad Basri Md Daud, Norashikin Kamarudin and Asnawi Seraila. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Particleboard from Acacia mangium hybrid Bambusa vulgaris var. striata in relation to different resin content / Syarqiah Md Desa. (2018) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Properties of laminated veneer lumber (LVL) from kelempayan (Neolamarckia cadamba) and rubberwood (Hevea brasiliensis) using different veneer combination and temperature / Nuraqila Shafiqah Md Nasir. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from eucalyptus pellita and petai belalang (leucaena leucocephala)/ Azematul Asma Md Yatim. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard using treated and untreated sugarcane bagasse / Muhammad Sideq Md Yunos. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Phenol formaldehyde as binder for rubberwood oriented strand board (OSB) / Suffian Misran, Rafeadah Rusli and Rahim Sudin. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Challenges in oriented strand board R&D in Malaysia / Suffian Misran … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Methods assessment for particle board properties: A review / Mohd Arif Fikri Mohamad Adnan , Ermadasila Mohamad and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Physical properties of Paraserianthes falcataria / Suria Mohamad Akhir and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Fabrication of hidden portable iron board / Nurul Nasuha Liyana Mohamad Anuar. (2022) [Student Project] (Submitted)

Properties of particleboard made from recycle board and wood slabs / Ramli Mohamad Khanafiah. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Influence of the oil palm trunk and acacia mangium on the particleboard Properties / Abdul Hakim Baihaqi Mohamad Noor, Zaimatul Aqmar Abdullah and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from oil palm frond for exterior use / Ainil Idzaty Mohamed Anwar. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Multipurpose cabinet using knockdown concept / Md Azharulzaman Mohamed Said. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of medium density fiberboard (MDF) from sumble and eucalyptus wood / Nur ‘Aina Syifa’ Mohamed Sapari. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Effects of mechanical properties and water resistance of particleboard from Kelempayan (Neolamarckia cadamba) wood with variation of hot pressing temperatures and board densities / Nur Sakinah Mohamed Tamat, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Properties of thermoplastic composite using sesendok and kelempayan sawdust at different filler loading of polypropylene / Noorshashilawati Azura Mohammad … [et al.]. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Bench shoes storage / Luqman Hakim Mohd Agus Adib. (2019) [Student Project] (Unpublished)

A study on the effects of particle sizes on physical and mechanical properties of particleboard on lesser-known species: a review / Nur Ain Farhana Mohd Asri. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of acacia mangium wood cement board in relation to particle size and additives (na2si03) / Mohamad Alif Aizat Mohd Azhar. (2015) [Student Project] (Unpublished)

Properties of acacia mangium wcb in relation to particle size and additives (Na2Si03) / Mohamad Alif Aizat Mohd Azhar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multipurpose frame storage from wooden pallet (pinus radiata) / Mohd Fais Mohd Faizu. (2019) [Student Project] (Unpublished)

Properties of particleboard from acacia mangium and rice husks / Siti Sarah Mohd Ghani. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

The physical and mechanical properties of cement bonded particle board from oil palm trunk / Mohd Alif Mohd Ghazali. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of cement board from different particle geometry and layer of oil palm trunk (opt) / Mohd Nahwan Nur Mohd Ghazali. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Multi-purpose (MPs) chair / Nur Huda Husna Mohd Hasmy … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Properties of particle board made from Batai (Paraserianthes falcataria) using phenol formaldehyde / Siti Ainatul Mardhiah Mohd Hata and Siti Khairoh Hassan. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of resin content and density on the properties three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta and Jamaludin Kasim. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Physical and mechanical properties of oriented strand board from sugarcane rind / Mohammad Basyeer Mohd Mazlan. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of kenaf fibre and rice husk incorporation on melt flow and mechanical properties of calcium carbonate/Polypropylene hybrid composite / Mohd Muizz Fahimi Mohamed and Rahmah Mohamed. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

Properties of particleboard from acacia mangium spp. / Mohamad Amir Sabirin Mohd Nasir. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of hybrid particleboard from kelempayan and rice husk using urea formaldehyde / Najiha Mohd Nasir. (2020) [Student Project] (Unpublished)

Test houses for roof thermal performance testing / Badrul Hisham Mohd Noor, Azni Zain-Ahmed and Nasharudin Sulaiman. (2008) In: Proceedings STSS 2008, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

Design and fabrication of mounted wall iron board / Muhamad Irfan Hanif Mohd Rozaly Mee. (2022) [Student Project] (Unpublished)

Inspired lounge david grass chair using plywood / Muhamad Shahrul Elmie Mohd Sabri. (2020) [Student Project] (Unpublished)

Multipurpose study table using blockboard / Nur Syuhada Amira Mohd Saripudin. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Design and fabrication of side table / Amir Muttaqin Mohd Taheh. (2020) [Student Project] (Unpublished)

Properties of particle and strand board from hevea brasiliensis and leucaena leucocephala / Muhammad Rahman Mohd Tahir. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Effects of varying resin content and wood species on particleboard properties / Nor Faizura Mohd Yassin …[et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Effect of resin content and species ratio on the properties of particleboard from leuceana spp and rubberwood/ Mohd Aizuddin Mohd Yusoff. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of resin content and species on the properties of particleboard from leuceana spp and rubberwood / Mohd Aizuddin Mohd Yusoff and Wan Mohd Nazri Wan Abd. Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

The properties of particle board from oil palm frond / Nur Aqeela Mohd Yussof. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Screw withdrawal properties on particleboard from oil palm frond / Nur Shazana Atiqa Mohd Zamri. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Finishing properties of polyurethane and acid catalyst based coating on bamboo stripped board / Norain Mokhtar. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

The gas-phase treatment of rubberwood / Suhaimi Muhammed. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 67-75. ISSN 0128-5599

Variation in fibre morphology and porosity of rubberwood (hevea brasiliensis) / Suhaimi Muhammed and Mohd. Hamami Sahri. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 6. pp. 40-45. ISSN 0128-5599

Fully jointed rack without the use of fasteners / Muhammad Faizal Musa. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from leucaena leucocephala in relation to varying particle size and resin content/ Faizatul Azma Mustafha. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of oriented strand board using a combination species from rubberwood and kelempayan / Iskandar Mustapa. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

N

Strength properties of sandwich composite made from plywood as skins and corrugated paper board as core / Nur Atiqah Najib. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of plywood from rubberwood, eucalyptus pellita and mix tropical species / Nik Muhamad Hazim Nik Mohd Adib. (2016) [Student Project] (Unpublished)

Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Oriented strand board: research on performance pattern and usage trend in Malaysia / Nurul Syafiqkah Noh. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Unique design of study table / Aznan Hakim Ahmad Nor Muhiddin. (2020) [Student Project] (Unpublished)

Withdrawal holding strength analysis of tapered threaded metal inserts in medium density fibreboard (MDF) / Kamarulzaman Nordin …[et al.]. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Sheet chair technology from pine wood species / Mohamad Hazlin Nurul Huda. (2019) [Student Project] (Unpublished)

O

Properties of acacia mangium wood cement board in relation to particle size and wood cement ratio / Ahmad Badrul Hisyam Omar. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Puzzle storage chair: Multifunction furniture / Alias Omar, Norashikin Kamarudin and Nur Aza Farahin Amirruddin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Mechanical and physical properties of wood cement board from oil palm trunk and rice husk in relation to particles: cement ratio / Fatin Amiera Omar. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Multipurpose book rack using blockboard / Aidasuzana Othman. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Physical and mechanical properties of gypsum-paper sludge board in furniture application / Norazleen Othman. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical and physical properties of gypsum-paper sludge board / Norazleen Othman and Siti Noorbaini Sarmin. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

P

The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip …[et al.]. (2015) In: UNSPECIFIED.

R

Verification of formaldehyde emission testing by desiccator method / Rafeadah R. …[et al.]. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Thermal conductivity of gypsum board in proportion to kenaf fiber and polyvinyl alcohol (PVA) / Nurul Nazwa Rahmat. (2016) [Student Project] Physical copy is available on shelf (Unpublished)

Review on properties of particleboard from wood particles and dried leaves / Raja Nazimuddin Shah Raja Yussuf Izzuddin Shah. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard from rubberwood and Raintree / Mohd Haniff Ramli. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from acacia mangium in relation to particle size/ Mohd Zaimy Ramli. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard made from oil palm frond using different resin content and board density / Ahmad Naqi Razali. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of particle size and resin on kelempayan particleboard/ Mohd Faizal Razali. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of three layer particle board from Leucaena leucocephala / Norhalimahtus Saadiah Razali. (2014) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Properties of high density fibreboard (HDF) from Leucaena and rubberwood / Nur Amalina Razali. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Properties of particleboard from acacia species using different resin content and board density / Nur Amalina Razali. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of particle ratio of particle board from Kenaf core, Leucaena, and Rubberwood / Mohd Irwan Rosli. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Design of octagon shape coffee table/ Muhammad Syazwan Rosli. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

S

The particleboard made from kenaf and its properties / Mohamad Jani, S … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of plywood from eucalyptus pellita, neolamarckia cadamba and paraserianthes falcataria with different layer and species arrangement / Muhammad Fitri Sa'ad. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Properties of three layers hybrid particleboard from sawdust and acacia mangium / Mohamad Sahzeri Sa'at. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Kenaf based cement bonded particleboard: a preliminary study on mechanical and physical properties / Mohamad Jani Saad …[et al.]. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Coffee table from combination materials: metal and glass / Shahafini Saidi. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Properties of particleboard from acacia mangium in relation to tree height portions/ Muhammad Badran Saleh. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Nail withdrawal properties on particleboard from acacia (Acacia mangium) / Addi Aidileikhmal Salikun. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Morphological characteristic of Ludai (sapium baccatum) / Nur Farahin Salleh. (2016) [Student Project] (Unpublished)

Cold tack of urea formaldehyde resins as an important factor in plywood production / Aiman Syamil Sallehuddin. (2019) [Student Project] (Unpublished)

Properties of particleboard from sentang and Kenaf core / Mohd Sufian Sarif. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core / Syed Muhammad Azlan Sayed Idrus. (2013) [Student Project] (Unpublished)

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core. / Syed Muhammad Azlan Sayed Idrus, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Writing table from medium density fibreboard (MDF) / Syuzaidi Shafia. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang. Physical copy is available on shelf

Properties of oil palm empty fruit bunch fibers, coconut husk and polypropylene composite - potential furniture material / Amran Shafie, Suhaimi Muhammed and Mohd Jafni Hashim. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Multipurpose storage boxes using blockboard / Suhaizah Shaharuddin. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Mechanical and physical properties of particleboard from log core / Nor Athirah Soberi. (2019) [Student Project] (Unpublished)

Mechanical, physical and working properties of particleboard made from tropical wood wastes / Nur Nazihan Sofian. (2016) [Student Project] (Unpublished)

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of oriented strand board from Kelempayan and Sentang / Suhaini Suria. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

T

Properties on ceiling board of rice husk (Oryza sativa) / Zurina Talib. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan / Tuan Mohd Fakrul Razie Tuan Ismail and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

U

Withdrawal strength and physical properties of three layers hybrid particleboard / Mohd Hanafi Umar. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of particleboard from Petai Belalang and Kelempayan / Nur Nadira Usop. (2019) [Student Project] (Unpublished)

W

Strength properties of engineered wood i-joist with finger jointed oriented strand board (osb) web and laminated veneer lumber flanges (lvl) / Wan Mohd Nazri Wan Abd Rahman and Mohd Ariff Jamaludin. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 3. pp. 14-23. ISSN 0128-5599

Properties of oriented strand board from petai belalang (Leucaena leucocephala) wood / Wan Mohd Nazri Wan Abdul Rahman. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

Effect of diameter and log shape on the veneer recovery rate in a plywood plant / Wan Mohd Nazri Wan Abdul Rahman and Mohd Ariff Jamaludin. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Mechanical properties of oriented strand board from kelempayan wood at different resin content / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Properties of oriented strand board (OSB) from Ludai and Kelempayan / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2004) [Research Reports] Physical copy is available on shelf (Unpublished)

Prefabricated wood i-joist: araucaria hunsteinii flanges and oriented strand board web with l-butt joint / Wan Mohd Nazri Wan Abdul Rahman … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of oriented strand board (OSB) from mixed species of Mahang and Lundai / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 55-68. ISSN 0128-5599

Some properties of kenaf and kenaf/cotton combing waste composites / Wan Yunus Wan Ahmad … [et al.]. (2004) In: STSS 2004 : Sains dan Teknologi 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of hybrid particleboard from acacia mangium and petai belalang using phenol formaldehyde resins / Wan Hazwani Wan Hassan, Jamaludin Kasim and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multifunctional storage with table and chair/ Wan Muhammad Hilmi Wan Ibrahim. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Multifunctional storage with table and chair / Wan Muhammad Hilmi Wan Ibrahim, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from fresh and degraded acacia wood/ Wan Mohammad Hanif Wan Mohd Yusoff. (2015) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of hybrid particleboard from acacia mangium and oil palm trunk / Wan Jamalludin Wan Omar, Jamaludin Kasim and Zaimatul Aqmar Abdullah. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particle board from batai and petal belalang / Wan Nur Sheila Anis Wan Rafai. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

Y

Properties of laminated veneer lumber from oil palm trunk veneer using different adhesives / Muhammad Najib Yusoff, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard made from acacia mangium and oil palm trunk in relation to different resin content / Nor Ain Nadirah Yusoff. (2014) [Student Project] Physical copy is available on shelf (Unpublished)

The effect of screw types on the holding strength of commercial 15mm and 18mm medium density fiberboard (MDF) / Muhammad Hariz Isyraf Yuszaini. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Z

Properties of HDF for flooring production: density, edge density, internal bonding, thickness swelling & moisture content / Faris Triputra Zahari. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Hocomb coffee table / Danish Irhammi Zaidi. (2019) [Student Project] (Unpublished)

Physical and mechanical properties of three-layer particleboard from oil palm frond (OPF) / Norfazlina Zainal. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Physical and mechanical properties of three layer particleboard from oil palm frond / Norfazlina Zainal, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Mechanical and physical properties of lignocellulosic plastic composite from hybrid sugarcane baggase and mixed tropical hardwood / Nurfatiha Zainal Abidin. (2020) [Student Project] (Unpublished)

Properties of hybrid particleboard produce from acacia and ludai / Nurul Nadjwa Zainuddin. (2019) [Student Project] (Unpublished)

Exploration and research on the product design method of YangJiaBu new year woodcut prints from the perspective of social innovation / Zhang Yuzhu, S'harin Mokhtar and Natrina Mariane P. Toyong. (2024) International Journal of Art and Design (IJAD), 8 (1 SI 2). pp. 14-30. ISSN 2710-5776 (Submitted)

Application of natural fibre composites in product design: a guiding framework / Zhang Xue and Hanif Khairi. (2024) International Journal of Art and Design (IJAD), 8 (1 SI 2). pp. 81-95. ISSN 2710-5776 (Submitted)

Properties of particleboard from admixture Kenaf (hibiscus cannabinus l.) core and oil palm trunk (OPT) / Mohd Shah Fitri Zolkapli. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Stackable keeper using wooden pallet / Shofiyah Zulkifli. (2019) [Student Project] (Unpublished)

This list was generated on Thu Nov 21 14:40:19 2024 UTC.