Screw withdrawal properties on particleboard from oil palm frond / Nur Shazana Atiqa Mohd Zamri

Mohd Zamri, Nur Shazana Atiqa (2011) Screw withdrawal properties on particleboard from oil palm frond / Nur Shazana Atiqa Mohd Zamri. [Student Project] (Unpublished)


In this study, particles of oil palm frond were used. Urea formaldehyde and wax addition were used as binder. Three percentage of resin urea formaldehyde (UF) that are 8%, 10% and 12% are used on homogeneous particleboard. Particle that used for face and core are 1.0 mm and 2.0 mm with density of 550 kg/m3. Screw withdrawal properties on the particleboard determined, in this test screws are drill into the two positions in test pieces vertically, pullout the screws vertically after fixing the test piece, measure the maximum loads required for pulling out, and consider the mean value of the two operations the wood screw holding power. Increasing in percentages of UF resin and wax will affected the screw withdrawal
properties on the homogeneous particleboard.


Item Type: Student Project
Email / ID Num.
Mohd Zamri, Nur Shazana Atiqa
Subjects: T Technology > TP Chemical technology > Oils, fats, and waxes > Palm oil
T Technology > TS Manufactures > Wood technology. Lumber > Wood products. Furniture
T Technology > TS Manufactures > Engineered wood. Fiberboard, particle board, etc.
Divisions: Universiti Teknologi MARA, Pahang > Jengka Campus > Faculty of Applied Sciences
Programme: Bachelor of Science (Hons.) Furniture Technology
Keywords: Oil palm, wood screw, particleboard
Date: 2011
Edit Item
Edit Item


[thumbnail of 55891.PDF] Text

Download (1MB)

Digital Copy

Digital (fulltext) is available at:

Physical Copy

Physical status and holdings:
Item Status:
On Shelf

ID Number




Statistic details