Items where Subject is "Wood technology. Lumber"

Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | I | J | K | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 115.

A

Ab Karim, Muhamad Haziq (2019) Properties of particleboard from dried leaves and eucalyptus pellita / Muhamad Haziq Ab Karim. (2019) [Student Project] (Unpublished)

Ab Manan, Mohd Yusmizan (2015) Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab Manan. (2015) [Student Project] (Unpublished)

Ab. Rahman, Marzuki and Wan Abdul Rahman, Wan Mohd Nazri and Midon, Mohd Shukari (2006) Kajian hubungan modulus keanjalan dan modulus kepecahan bagi kayu keruing berskala penuh dan berskala kecil / Marzuki Ab. Rahman, Wan Mohd Nazri Wan Abdul Rahman and Mohd Shukari Midon. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 29-37. ISSN 0128-5599

Ab. Zulkifli, Zurita (2004) Bending strength of small clear specimen from Merbau and Araucaria hunsteinii / Zurita Ab. Zulkifli. (2004) [Student Project] (Unpublished)

Abd Ghani, Mohd Aliff (2004) Log recovery of Keruing belimbing (Dipterocarpus grandiflorus) and Kelat (Syzygium spp) / Mohd Aliff Abd Ghani. (2004) [Student Project] (Unpublished)

Abd Latib, Nurfaizah and Mohamed Tamat, Nur Sakinah and Kasim, Jamaludin (2011) The effects of tree portion on extractive content of Kelempayan (Neomalarckia cadamba sp.) wood / Nurfaizah Abd Latib, Nur Sakinah Mohamed Tamat and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Abdul Basit, Nur Azlina (2016) Finishing properties of Mahang Gajah (macaranga gigantea) by using different finishing systems and abrasive papers / Nur Azlina Abdul Basit. (2016) [Student Project] (Unpublished)

Abdul Malik, Nasrul (2002) Prefabricated wood i-joist from Laminated Veneer Lumber (LVL) flange and plywood parallel web / Nasrul Abdul Malik. (2002) [Student Project] (Unpublished)

Abdul Rahman, Saipudin (2004) Chemical properties of Acacia mangium / Saipudin Abdul Rahman. (2004) [Student Project] (Unpublished)

Abdull Latif, Mohammad Hasif (2016) Mechanical properties of bamboo strip composite by different portion of bambusa blumeana for archery limb production / Mohammad Hasif Abdull Latif. (2016) [Student Project] (Unpublished)

Abdullah, Muhamad Azlan and Awang@Othman, Ahmad Fauzi and Mohd Mokhtar, Izyan Lyana (2015) Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Ahmad, Mohamad Safuan (2000) Production and export market of medium density fiber board in peninsular Malaysia / Mohamad Safuan Ahmad. (2000) [Student Project] (Unpublished)

Ahmad, Muhamad Hisyam (2016) Product design : Mirror frame from Buluh Semantan (gigantochloa scorchtechinii) / Muhamad Hisyam Ahmad. (2016) [Student Project] (Unpublished)

Ahmad, Nurrohana (2021) Properties of oil palm trunk particleboard with light hardwood veneer overlaid / Nurrohana Ahmad. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Ahmad, Nurrohana and Kasim, Jamaludin and Wan Mohd Nor, Wan Mohd Nor Safizu and Rosman, Norhafizah (2013) Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Ahmad Razan, Ahmad Fahmi (2010) Effect of different relative humidity on physical and mechanical properties of moulded laminated coconut veneer lumber (LCVL) backrest / Ahmad Fahmi Ahmad Razan. (2010) [Student Project] (Unpublished)

Ahmad Rosli, Nur Shafiqah (2016) Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli. (2016) [Student Project] (Unpublished)

Anuar, Muhammad Akmal (2019) Epoxy coffee table with wood disc decoration / Muhammad Akmal Anuar. (2019) [Student Project] (Unpublished)

Ariffin, Mohd Ikram (2003) Band saw and circular saw: current utilization in woodworking industry / Mohd Ikram Ariffin. (2003) [Student Project] (Unpublished)

Arnie, Rusilma (2016) Properties of particleboard from coconut coir and empty fruit bunch (EFB) / Rusilma Arnie. (2016) [Student Project] (Unpublished)

Asha'ari, Ahmad Hafizuddin (2016) Particleboard properties from 2.0mm wood waste particle size in relation to different board density and resin content / Ahmad Hafizuddin Asha'ari. (2016) [Student Project] (Unpublished)

Azamy, Muhammad Azman (2019) Foldable laptop table / Muhammad Azman Azamy. (2019) [Student Project] (Unpublished)

Azhar Ahmad, Amy Saiful Affendy (2016) Chess square table / Amy Saiful Affendy Azhar Ahmad. (2016) [Student Project] (Unpublished)

Azizul Rahman, Farah Nordyana (2017) The physical and mechanical properties of rice husk/ recycled plasticised polyvinyl chloride compression moulded composite at various filler loadings and particle sizes / Farah Nordyana Azizul Rahman. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

B

B. Abdullah, Muhammad Rizal (2003) Peripheral milling machines in wood industry / Muhammad Rizal B. Abdullah. (2003) [Student Project] (Unpublished)

C

Che Ab Rahim, Nurnabilah Hanee (2016) Properties of cement board made from various sizes of oil palm trunk strands / Nurnabilah Hanee Che Ab Rahim. (2016) [Student Project] (Unpublished)

Che Haron, Mohd Aminuddin and Muhammed, Suhaimi and Saleh, Abdul Hamid and Mohd Hassan, Nurul Husna and Abdul Karim, Siti Rafedah (2014) Buluh Betong for the production of Peeled Bamboo-Fiberglass Composite (PBFC) / Mohd Aminuddin Che Haron … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 148. (Submitted)

Che Nazir, Nurul Aziemah (2014) Particulate matters and lung function performances in wood based industries / Nurul Aziemah Che Nazir. (2014) [Student Project] (Unpublished)

Chek Romli, Mohd Hafiz (2013) Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli. (2013) [Student Project] (Unpublished)

D

Derahman, Rohana (2004) Developments in drying technologies / Rohana Derahman. (2004) [Student Project] (Unpublished)

G

Ghazali, Azhanim (2004) Bending strength properties of small clear specimens wood from Merbau and Gelam / Azhanim Ghazali. (2004) [Student Project] (Unpublished)

Ghazali, Izharrashid (2016) Performance of wood joint from two selected timber species / Izharrashid Ghazali. (2016) [Student Project] (Unpublished)

H

Hamdan, Nurfarhana (2014) Finishing properties of a bookshelf from Kelempayan (neolamarckia cadamba) / Nurfarhana Hamdan. (2014) [Student Project] (Unpublished)

Haris, Zainab (2015) Properties of oriented strand board (OSB) from acacia mangium and rubberwood / Zainab Haris. (2015) [Student Project] (Unpublished)

Hassan, Muhammad Hakimi (2005) Practical procedures in kiln drying / Muhammad Hakimi Hassan. (2005) [Student Project] (Unpublished)

I

Ibrahim, Nor Afizah (2012) The effect of quick drying test on mersawa species / Nor Afizah Ibrahim. (2012) [Student Project] (Unpublished)

Ismail, Izwan (2012) Bending properties of finger jointed from oil palm lumber (OPL) / Izwan Ismail. (2012) [Student Project] (Unpublished)

Ismail, Mohd Fairuz (2009) Design & fabrication of impact testing equipment for wood pallet / Mohd Fairuz Ismail. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Ismail, Norjannah Mariam Hanna (2007) Timber drying techniques and its defects / Norjannah Mariam Hanna Ismail. (2007) [Student Project] (Unpublished)

J

Jaafar, Mohd Zahid (2016) Factors affecting formaldehyde emission in particleboard manufacturing / Mohd Zahid Jaafar. (2016) [Student Project] (Unpublished)

Johari, Siti Nur Aliyah (2023) Keppel Wood Industries (M) Sdn Bhd / Siti Nur Aliyah Johari. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

Junaidi, Siti Kamilah (2016) Properties of neolamarckia cadamba plywood made with phenol formaldehyde (PF) resin / Siti Kamilah Junaidi. (2016) [Student Project] (Unpublished)

Jusoh, Syahirah (2015) Environmental impact assessment of raw material input and production process on Malaysian wood-based panel products / Syahirah Jusoh. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

K

Kamaruzaman, Ahmad Safwan (2018) Expandable table from wooden pallet / Ahmad Safwan Kamaruzaman. (2018) [Student Project] (Unpublished)

Kasim, Azman and Shafie, Amran and Hashim @ Ismail, Azhan (2006) Comparative studies of elastic properties of commercial-type woods / Azman Kasim, Amran Shafie and Azhan Hashim @ Ismail. (2006) [Research Reports] (Unpublished)

Kasim, Jamaludin and Che Kar, Muhamad Nasrulrahman and Wan Abd Rahman, Wan Mohd Nazri and Ahmad, Nurrohana and Sarmin, Siti Noorbaini and Mohd Yunus, Nur Yuziah and Mansor, Rafizah (2013) Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Jamaludin Kasim …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Kasim, Jamaludin and Dhalan, Khairul Zaman and Harun, Jalaluddin and Ashaari, Zaidon and Mohmod, Abd. Latif and Mohd Yusof, Mohd Nor (2003) Some selected properties of bamboo thermoplastic composite: Influence of particle size, filler loading and maleated anhydride polypropylene addition / Jamaludin Kasim …[et al.]. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 126-134. ISSN 0128-5599

Kasim, Jamaludin and Hj. Ahmad, Abd. Jalil (2005) Effects of bamboo density and chemical properties on the properties of particleboard produced from Giganfochloa Scortechinii / Jamaludin Kasim and Abd. Jalil Hj. Ahmad. (2005) Jurnal Gading, 9 (1). pp. 91-100. ISSN 0128-5599

Kasim, Jamaludin and Mahmud, Zuhana and Ab Aziz, Abd Haqeem and Zaiton, Siti Haziah (2006) Physical and mechanical properties of thermoplastic composite from oil palm trunk / Jamaludin Kasim …[et al.]. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 69-76. ISSN 0128-5599

Kasim, Jamaludin and Mamat, Nor Asikir (2008) Effects of age and bamboo portion on the ash and silica content of Buluh Semantan (Gigantochloa Scortechinil) / Jamaludin Kasim and Nor Asikir Mamat. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 19-24. ISSN 0128-5599

Kasim, Jamaludin and Othman, Ahmad Fauzi and Yamani, Shaikh Abdul Karim (2005) Properties of urea-formaldehyde particleboard from particles of mixed timber species / Jamaludin Kasim, Ahmad Fauzi Othman and Shaikh Abdul Karim Yamani. (2005) Jurnal Gading, 9 (1). pp. 17-22. ISSN 0128-5599

Kasim, Jamaludin and Sintan, Veronica and Mohmod, Abd. Latif (2005) Mechanical and dimensional properties of bamboo (Gigantochloa Scortechinii) fiber - thermoplastic composite / Jamaludin Kasim, Veronica Sintan and Abd. Latif Mohmod. (2005) Jurnal Gading, 9 (1). pp. 131-138. ISSN 0128-5599

Kasim, Jamaludin and Wan Abd Rahman, Wan Nazri and Husin, Suriana (2007) Mechanical and physical properties of araucaria fibre-polypropylene composite / Jamaludin Kasim, Wan Nazri Wan Abd Rahman and Suriana Husin. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 1-9. ISSN 0128-5599

Khairul Anuar, Amirun Rafiq (2019) DIY console table / Amirun Rafiq Khairul Anuar. (2019) [Student Project] (Unpublished)

Kusin, Mazlin and Rosman, Norhafizah and Ahmad, Said and Badrul Nidzam, Nuramiratul Hakimah (2016) Finishing properties of acid catalyst lacquer on Oil Palm Lumber (OPL) / Mazlin Kusin … [et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

M

M Razip, M Rafais (2012) Strength properties of finger jointed wood from fast growing species / M Rafais M Razip. (2012) [Student Project] (Unpublished)

M Razip, M Rafais and Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin (2012) Strength properties of finger jointed wood from fast growing species / M Rafais M Razip, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Madun, Mazliah (2002) Prefabricated wood i-joist from jointed Laminated Veneer Lumber (LVL) as flange and web / Mazliah Madun. (2002) [Student Project] (Unpublished)

Mahmud, Siti Zalifah and Anuar, Muhammad Akmal and Abdul Jalil, Ainul Munirah and Ahmad, Nurrohana and Sarmin, Siti Noorbaini and Mohammad, Noorshashillawati Azura (2020) Hybrid coffee tabletop from off-cut tree branches and epoxy resin / Siti Zalifah Mahmud ... [et al.]. (2020) In: International Innovation, Invention and Design Competition, 17 May-10 Oct 2020.

Mamat, Noorma Theressa (2004) Special drying methods in wood drying / Noorma Theressa Mamat. (2004) [Student Project] (Unpublished)

Mansur, Zubaidah (2006) Integrated timber harvesting information and planning system using geographical information system technology / Zubaidah Mansur. (2006) Masters thesis, thesis, Universiti Teknologi MARA.

Marzuki, Mazlinda (2015) Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density / Mazlinda Marzuki. (2015) [Student Project] (Unpublished)

Mat Dom, Muhamad Shalihin (2016) Bamboo partition / Muhamad Shalihin Mat Dom. (2016) [Student Project] (Unpublished)

Mat Yuti, Muhammad Arbain (2015) Side table from oil palm lumber (OPL) (Elaeis guineensis) / Muhammad Arbain Mat Yuti. (2015) [Student Project] (Unpublished)

Mat Yuti, Muhammad Arbain and Nik Hashim, Nik Hazlan (2014) Side table from oil palm lumber / Muhammad Arbain Mat Yuti and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Md Razali, Ahmad Shukry (2016) Furniture design : Coffee table using recycle materials (solid wood waste) / Ahmad Shukry Md Razali. (2016) [Student Project] (Unpublished)

Md Saad, Muhamad Hafiz (2015) Machining properties of 25 and 50 years old treated oil palm lumber / Muhamad Hafiz Md Saad. (2015) [Student Project] (Unpublished)

Md Saad, Muhamad Hafiz and Awang @Othman, Ahmad Fauzi (2015) Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Michael Jopie, Alain Dillon (2019) Performance of adhesive formulation using glutinous, sago and tapioca flour / Alain Dillon Anak Michael Jopie. (2019) [Student Project] (Unpublished)

Misfar, Siti Nadzirah and Kasim, Jamaludin (2011) Fibre morphological properties of Kelempayan (Neomalarckia cadamba sp.) wood / Siti Nadzirah Misfar and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Moh Yusoff, Muhammad Najib (2011) Properties of laminated veneer lumber from oil palm trunk by using different adhesive/ Muhammad Najib Moh Yusoff. (2011) [Student Project] (Unpublished)

Mohamad, Fatin Nadhirah (2016) Properties of particleboard from oil palm trunk in relation to various sizes of particles / Fatin Nadhirah Mohamad. (2016) [Student Project] (Unpublished)

Mohamad Adnan, Mohd Arif Fikri and Mohamad, Ermadasila and Kasim, Jamaludin (2011) Methods assessment for particle board properties: A review / Mohd Arif Fikri Mohamad Adnan , Ermadasila Mohamad and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Mohamad Akhir, Suria and Kasim, Jamaludin (2011) Physical properties of Paraserianthes falcataria / Suria Mohamad Akhir and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Mohamed, Noradila and Mohd Aminuddin, Murni Amirra and Ismail, Zitty Sarah and Mohd Yasim, Nurzulaifa Shaheera Erne and Nik Ariffin, Nik Azlin (2018) Air quality in wood-based small and medium enterprises in Selangor / Noradila Mohamed ... [et al.]. (2018) Science Letters (ScL), 12 (2): 5. pp. 38-44. ISSN (eISSN): 2682-8626

Mohamed Shamsi, Masidah (2001) Mechanical fasteners and connectors use in timber constructions / Masidah Mohamed Shamsi. (2001) [Student Project] (Unpublished)

Mohammad, Hazilla (2005) Woodworking machineries: their anatomy and safety tips / Hazilla Mohammad. (2005) [Student Project] (Unpublished)

Mohammad, Mohd Iznil (2002) Laminated Veneer Lumber (LVL) industry in Malaysia / Mohd Iznil Mohammad. (2002) [Student Project] (Unpublished)

Mohammad, Noorshashillawati Azura and Sarmin, Siti Noorbaini and Mohd Hassan, Nurul Husna and Mahmud, Siti Zalifah and Ahmad, Nurrohana and Mohd Akil, Fatma Adhira Shafiqa (2019) The effect of different types of filler on the mechanical and physical properties of wood plastic composite from eucalyptus spp / Noorshashillawati Azura Mohammad...[et al.]. (2019) Gading Journal for Science and Technology, 2 (1). pp. 52-59. ISSN 2637-0018

Mohd Arif, Mohd Faizal (2008) Mechanical and physical properties of wood polypropylene composites from three Malaysian wood species / Mohd Faizal Mohd Arif. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Mohd Faizu, Mohd Fais (2019) Multipurpose frame storage from wooden pallet (pinus radiata) / Mohd Fais Mohd Faizu. (2019) [Student Project] (Unpublished)

Mohd Hasmy, Nur Huda Husna and Yaacob, Zalini and Mohd Zaidi, Rusydiana and Borhanordin, Amirah Hazimah and Kamaludin, Nur Aqila Nadira and Anuar, Fatin Syazana and Md Taib, Norraeffa (2012) Multi-purpose (MPs) chair / Nur Huda Husna Mohd Hasmy … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Mohd Nor Samawi, Mohamad Sukri (2016) Properties of moisture resistance kelempayan neolamarckia cadamba based plywood / Mohamad Sukri Mohd Nor Samawi. (2016) [Student Project] (Unpublished)

Mohd Shargawi, Md Nazri Samin (2002) Prefebricated wood i-joist from Lamineted Veneer Lumber (LVL) flanges and plywood perpendicular web / Md Nazri Samin Mohd Shargawi. (2002) [Student Project] (Unpublished)

Mohd Tahir, Muhammad Rahman (2012) Properties of particle and strand board from hevea brasiliensis and leucaena leucocephala / Muhammad Rahman Mohd Tahir. (2012) [Student Project] (Unpublished)

Mohd Yasin, Mazliyanah (2001) Wood finishing: equipment and associated accessories / Mazliyanah Mohd Yasin. (2001) [Student Project] (Unpublished)

Mohd. Norizan, Azharizan (2006) The impacts of chain of custody certification on the Malaysian wood-based industries / Azharizan Mohd. Norizan. (2006) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Mokhtar, Nik Amirul Fadzil (2011) Bending strength of finger joint from neomalarkia cadamba and sappium baccatum/ Nik Amirul Fadzil Mokhtar. (2011) [Student Project] (Unpublished)

Mokhtar, Nik Amirul Fadzil and Mahmud, Siti Zalifah (2011) Bending strength of finger joint from kelempayan (neomalarkia cadamba) and ludai (sapium baccatum) / Nik Amirul Fadzil Mokhtar and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Muhamad Fauzi, Faizah (2012) Mechanical and physical properties of reconstituted panel from oil palm frond at different age groups / Faizah Muhamad Fauzi. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Muhammed, Suhaimi (2002) The gas-phase treatment of rubberwood / Suhaimi Muhammed. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 67-75. ISSN 0128-5599

Muhammed, Suhaimi and Mohd. Nawawi, Rudaini (2005) Sifat fizikal dan struktur kayu: keunikan kayu dan keagungan tuhan / Suhaimi Muhammed and Rudaini Mohd Nawawi. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

N

Nik Lah, Nik Ahmad Farizan (2001) Variation in fiber morhology of Meranti Kepong (shorea ovalis) from pith to bark / Nik Ahmad Farizan Nik Lah. (2001) [Student Project] (Unpublished)

Nik Soh, Nik Muhammad Ashraf (2014) Properties of finger joint by different species and adhesive / Nik Muhammad Ashraf Nik Soh. (2014) [Student Project] (Unpublished)

Nordin, Kamarulzaman and W. Samsi, Hashim and Ahmad, Mansur and Jamaludin, Mohd Ariff (2004) Improved properties of Oil Palm Trunk (OPT) Laminated Veneer Lumber (LVL) through the inclusion of rubberwood veneers / Kamarulzaman Nordin ... [et al.]. (2004) Science Letters, 1 (1). pp. 51-56. ISSN 1675-7785

Nordin, Nur Saidah (2013) Potential of leucaena leucocephala wood as a source of renewable energy / Nur Saidah Nordin. (2013) [Student Project] (Unpublished)

Nurul Huda, Mohamad Hazlin (2019) Sheet chair technology from pine wood species / Mohamad Hazlin Nurul Huda. (2019) [Student Project] (Unpublished)

O

Othman, Fauzi and Yamani, Shaikh Abdul Karim and Sahat, Sa'diah and Shafie, Amran and Ahmad Zaki, Junaiza and Abd Latif, Nur Hannani and Mohamad, Aminuddin and Nik Hashim, Nik Hazlan and Kamarudin, Norashikin (2013) Study on drying of oil palm trunk with ethanol / Fauzi Othman … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Othman, Mohd Fadhli (2013) Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman. (2013) [Student Project] (Unpublished)

P

Philip, Jonity (2015) The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip. (2015) [Student Project] (Unpublished)

R

Rasdi, Noor Rosida (2004) Sawn hardwood lumber grading / Noor Rosida Rasdi. (2004) [Student Project] (Unpublished)

Rohaffin, Nur Liyana Izzati (2016) Effects of hot and cold condition on finishing properties of Mahang Gajah (macaranga gigantae) / Nur Liyana Izzati Rohaffin. (2016) [Student Project] (Unpublished)

Rosli, Nur Balquis (2016) Wood plastic composite using rice husk at different filler loading / Nur Balquis Rosli. (2016) [Student Project] (Unpublished)

S

Sadiman, Muhammad Noor (2019) Epoxy coffee table from sindora spp. / Muhammad Noor Sadiman. (2019) [Student Project] (Unpublished)

Salleh, Nur Farahin (2016) Morphological characteristic of Ludai (sapium baccatum) / Nur Farahin Salleh. (2016) [Student Project] (Unpublished)

Sofian, Nur Nazihan (2016) Mechanical, physical and working properties of particleboard made from tropical wood wastes / Nur Nazihan Sofian. (2016) [Student Project] (Unpublished)

T

Tumingin, Iz'aan Iqbal (2007) Strength properties of finger joint, butt joint and lap joint from Resak (Vatica cuspidata) / Iz'aan Iqbal Tumingin. (2007) [Student Project] (Unpublished)

U

UiTM Cawangan Melaka, Perpustakaan Tun Abdul Razak (2020) Pameran maya: keunikan rumah melayu Melaka mengamit nostalgia / Perpustakaan Tun Abdul Razak UiTM Cawangan Melaka. (2020) Other. Perpustakaan Tun Abdul Razak, UiTM Cawangan Melaka. (Submitted)

W

W. Abdul Rahman, W. Mohd Nazri and Jamaludin, Mohd Ariff (2002) A study on the veneer recovery rate in a plywood plant / W. Mohd Nazri W. Abdul Rahman and Mohd Ariff Jamaludin. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 152-160. ISSN 0128-5599

Wan Abdul Rahman, Wan Mohd Nazri (2009) Properties of oriented strand board from petai belalang (Leucaena leucocephala) wood / Wan Mohd Nazri Wan Abdul Rahman. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin and Sudin, Rahim (2004) Properties of oriented strand board (OSB) from Ludai and Kelempayan / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2004) [Research Reports] (Unpublished)

Wan Nordin, Wan Najihah and Anuar, Ahmad Nazrin Aris and Ramli, Rohaslinda Ramele (2022) The potential of traditional Malay woodcarving as a cultural heritage tourism product in Kuala Terengganu / Wan Najihah Wan Nordin, Ahmad Nazrin Aris Anuar and Rohaslinda Ramele Ramli. (2022) ESTEEM Journal Of Social Sciences And Humanities, 6 (2). pp. 30-44. ISSN 2600 7274

Y

Young Rockie, Nurul Anies Suraya (2020) Blueprint : Easy Sdn Bhd “Space-Saving Plastic Bag Storage Box” / Nurul Anies Suraya Young Rockie. (2020) [Entrepreneurship Project] (Submitted)

Z

Zulkepli, Mohd Shuaib Azali (2016) Particle board from wood waste with size particle (1.0 mm) in relation to different board density and resin content / Mohd Shuaib Azali Zulkepli. (2016) [Student Project] (Unpublished)

Zulkifli, Shofiyah (2019) Stackable keeper using wooden pallet / Shofiyah Zulkifli. (2019) [Student Project] (Unpublished)

This list was generated on Fri Jul 25 02:28:59 2025 UTC.