Items where Subject is "Wood products. Furniture"

A

Effect of strand sizes and resins on oriented strand board using kelempayan / Muhamad Amir Hamzah A.Rahim. (2011) [Student Project] (Unpublished)

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Kajian hubungan modulus keanjalan dan modulus kepecahan bagi kayu keruing berskala penuh dan berskala kecil / Marzuki Ab. Rahman, Wan Mohd Nazri Wan Abdul Rahman and Mohd Shukari Midon. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 29-37. ISSN 0128-5599

Casa Floor Enterprise / Khairunnisa Abd Murad ... [et al.]. (2003) [Entrepreneurship Project] (Unpublished)

Wheeled epoxy multifunction storage box / Nur Azaliah Abd Rahman. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Mechanical properties of composite panel from sugarcane baggase, oil palm frond and fiberglass – an alternative for furniture material / Fareezal Abd. Wahab. (2011) [Student Project] (Unpublished)

The Woodpecker Enterprise / Addina Syaza Abdul Aziz … [et al.]. (2022) [Entrepreneurship Project] (Unpublished)

Properties of finger joint from acacia mangium wood / Aizuddin Arif Abdul Ghani. (2013) [Student Project] (Unpublished)

Strength analysis of dowel jointed rubberwood (Hevea brasiliensis) chair side frame / Muhamad Fairuzzairi Abdul Hamid. (1999) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Compact workstation from Kelempayan (Neolamarckia cadamba) / Nur Hannani Abdul Latif … [et al.]. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Laminated bamboo side table with 70 degree of curvature leg / Nur Farah Dayana Abdul Rahim. (2014) [Student Project] (Unpublished)

A study of foreign direct investment: the impact on electrical & electronic products, wood & wood products, transport equipment and food manufacturing / Umi Azwani Abdul Rahman. (2002) Degree thesis, thesis, Universiti Teknologi MARA, Kelantan.

Multipurpose chair and table (CHATAB) / Azlif Rohaizad Abdul Razak. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Aging effect of urea formaldehyde on particleboard with different resin content (Endorspermum sp.) / Nuraisyah Abdul Razak. (2016) [Student Project] (Unpublished)

Compact workstation from kelempayan (neolamarckia cadamba)/ Azuandi Abdullah. (2014) [Student Project] (Unpublished)

Modern chevron coffee table using wood waste / Haifa Nur Dinie Abdullah. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties roughness of sand papers and layers of shellac on acacia mangium wood / Nik Mohd Izwan Abdullah. (2014) [Student Project] (Unpublished)

Weathered oil palm trunk as alternative raw material for ceiling board (Elaeis guineensis) / Normala Abu Bakar. (2013) [Student Project] (Unpublished)

Strength properties of single dowel joint using kelempayan wood and opt / Mohd Fazli Abu Hassan. (2015) [Student Project] (Unpublished)

Strength properties of single dowel joint using kelempayan wood and oil palm trunk / Mohd Fazli Abu Hassan, Ahmad Fauzi Awang @ Othman and Asnawi Serailla. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

MODAT study table from particleboard / Ashree Afazal. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Variation of moisture content and density in bamboo (gigantochloa scortechinii) : Effects of age and culm height / Abd. Jalil Ahmad, Jamaludin Kasim and Abd. Latif Mohmod. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 1. pp. 1-5. ISSN 0128-5599

Properties of oil palm trunk particleboard with light hardwood veneer overlaid / Nurrohana Ahmad. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Effects of height portion and distance from pith on the density of oil palm trunk / Nurrohana Ahmad and Jamaludin Kasim. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Particleboard properties from Mahang Gajah (Macarranga gigantea) particles / Nurrohana Ahmad, Jamaludin Kasim and Nafizah Hassan. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Finishing properties of a coffee tray from (neolamarckia cadamba)/ Nurulnajihah Ahmad. (2014) [Student Project] (Unpublished)

Students' sitting posture and patterns in Universiti Teknologi MARA Pahang / Muhamad Iqbal Ahmad Bostaman. (2013) [Student Project] (Unpublished)

Portable stylish television stand made from resin-treated Kelempayan (Neolamarckia cadamba) / Natrah Ahmad Fauzi. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Coconut wood as raw material for table making / Khairuddin Ahmad Jamaluddin. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Sz shape side table from kelempayan wood (neolamarckia cadamba) / Hadi Shapii Ahmad Shapi'i. (2019) [Student Project] (Unpublished)

Ahmad Zaki, Junaiza and Wan Abdul Rahman, Wan Mohd Nazri and Shafie, Amran and Abdul Jalil, Ainul Munirah and Mohd Yunus, Nor Yuziah Laboratory manual on wood properties / Junaiza Ahmad Zaki ... [et al.]. (2019) UiTM Press, Universiti Teknologi MARA (UiTM). ISBN 978-967-363-556-6

Separable birdcage by using recycle materials (solid wood waste)/ Al-Aiman Al-Azmi. (2018) [Student Project] (Unpublished)

3D finite element analysis of a wood dowel in bending perpendicular to the grain / Haslin Idayu Amaruddin and Rohana Hassan. (2022) Gading Journal of Science and Technology, 5 (1): 9. pp. 69-76. ISSN 2637-0018

Multipurpose kitchen rack / Azizee Amirul Anyryza ... [et al.]. (2017) [Student Project] (Unpublished)

Upholstered storage bench from waste timber / Siti Anisah Arshad. (2014) [Student Project] (Unpublished)

Particleboard properties from 2.0mm wood waste particle size in relation to different board density and resin content / Ahmad Hafizuddin Asha'ari. (2016) [Student Project] (Unpublished)

Knock on wood company : foldable dining set / Arif Azfar Azhar, Muhammad Nazri Mohd Salme & Mohd Afiq Syahmi Mohd Noor. (2017) [Entrepreneurship Project] (Unpublished)

Chess square table / Amy Saiful Affendy Azhar Ahmad. (2016) [Student Project] (Unpublished)

Multifunctional rubberwood storage table and stool / Wan Nur Hanani Azlan. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Lichtenberg design on side table using acacia wood / Muhammad Toha Azmi. (2019) [Student Project] (Unpublished)

B

Wear pattern of various router bit material in cutting rubberwood medium density fibreboard / Muhammad Kamal Ariffin Badrun. (1999) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Embellish Kitchen Design / Norliana Baharil … [et al.]. (2004) [Entrepreneurship Project] (Unpublished)

Adjustable resting chair with rattan seat / Mohd Yusof Baharom. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Adjustable laptop table with diy concept / Zamri Buhari. (2013) [Student Project] (Unpublished)

Adjustable laptop table with DIY concept / Zamri Buhari, Nur Hannnani Abd Latif and Shaikh Abdul Karim Yamani Zakaria. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

C

Multipurpose dressing table with storage and wheels / Nik Nurain Che Ismail. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Coffee table with sliding book case / Che Mohamad Azrul Che Lah and Norashikin Kamarudin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli. (2013) [Student Project] (Unpublished)

The properties of reconstituted panel manufactured from oil palm fronds / Chen Fung Woo and Suhaimi Muhammed. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 7. pp. 46-53. ISSN 0128-5599

D

Properties of medium density fiberboard (MDF) from fast growing species in Pakistan / Nabilatul Ezzatie Dainal @ Zainal. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of nitrocellulose lacquer on plywood / Nurul Nadzirah Dildar Mohamad. (2016) [Student Project] (Unpublished)

E

Smart light side table from bamboo / Syasya Nazifa Elias. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Finishing properties of laptop table from Kelempayan (neolamarckia cadamba) wood / Engku Syahmi Arif Engku Ahmad Fakri. (2014) [Student Project] (Unpublished)

H

Properties of particleboard from Buluh Minyak (Bambusa vulgaris) / Halimatulsaadiah Halim. (2013) [Student Project] (Unpublished)

Finishing properties of a bookshelf from Kelempayan (neolamarckia cadamba) / Nurfarhana Hamdan. (2014) [Student Project] (Unpublished)

Studies of monomer impregnation and polymerized "in-situ" in wood using dynamic mechanical thermal analyser (DMTA) / S. Hamdan, Y.L. Liew and Z.A. Talib. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Selfie sofa with flexible arrangement / Norhayati Hamzah. (2014) [Student Project] (Unpublished)

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Machining properties of Sesendok and teak: a comparative analysis / Muhammad Rowi Hasan. (2002) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Business revival through operational process re-engineering: the case of Permint Plywood Sdn. Bhd. / Nor Azman Hasan, Syamsilawani Saari@Dahari & Zahidah Shikh Anuar. (2008) Masters thesis, thesis, Universiti Teknologi MARA Terengganu.

Finishing properties of polyurethane lacquer on acacia wood / Asminudin Hasanuddin. (2013) [Student Project] (Unpublished)

Flexi shoe rack / Muhammad Amirul Hakim Hassan … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Multifunction garment rack from rubberwood / Mohd Syafirul Alif Hisham. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Mechanical properties of Kedondong, Meranti, and Mersawa affect by steaming treatment / Mohd Najib Husin. (2012) [Student Project] (Unpublished)

Properties of particleboard (550 kg/m3) from Sesendok (Endospermum malaccensis) / Siti Hajar Hussin. (2005) [Student Project] (Unpublished)

I

The effect of quick drying test on mersawa species / Nor Afizah Ibrahim. (2012) [Student Project] (Unpublished)

Finishing properties of coffee table by using kelempayan (neolamarckia cadamba) / Hanis Afiqah Idrus. (2015) [Student Project] (Unpublished)

Finishing properties of coffee table by using kelempayan (Neolamarckia cadamba) / Hanis Afiqah Idrus and Junaiza Ahmad Zaki. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Finishing properties of polyurethane lacquer and nitrocellulose lacquer on Mengkulang (heritiera sp) / Khairunnazaty Ishak. (2014) [Student Project] (Unpublished)

Properties of particleboard made from admixture materials of kelempayan (neolamarckia cadamba), mixed species of durian husk and oil palm frond (elaeis guineensis jacq.) in relation to density / Izzah Ismadi. (2014) [Student Project] (Unpublished)

The application of finishing on writing table / Imnizan Ismail. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Physical and mechanical properties of hybrid plywood from coconut and rubberwood veneer bonded with different adhesive / Mohammad Fahamy Ismail. (2011) [Student Project] (Unpublished)

Audio visual cabinet with storage function / Mohd Asri Ismail. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Evaluation on the physical and mechanical properties of particleboard from Batai (Paraserianthes falcataria) / Noor Rehan Ismail. (2011) [Student Project] (Unpublished)

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail. (2015) [Student Project] (Unpublished)

Properties of mixed species lamination product from khaya ivorensis and oil palm trunk / Nur Isfarina Ismail …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Kenaf core particleboard based on physical, mechanical and acoustic properties / Nur ‘Izzati Ismail. (2014) [Student Project] (Unpublished)

J

Mesabu from bamboo strips (Bambusa vulgaris) / Ema Syahira Jaafar. (2019) [Student Project] (Unpublished)

Oriented strand board from acacia mangium and neolamarckia cadamba (kelempayan) in relation to temperature and pressure / Farah Umirah Jamal Abdul Nasir. (2016) [Student Project] (Unpublished)

Chemical composition of oil palm frond / Farhana Jasmi, Farahin Yusoff and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Sodium hydroxide treatment on natural fibers for better fiber morphology: A review / Nor Farhana Jasmi, Nur Farahin Yusoff and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Finishing properties on particleboard from Gliricidia sepium / Nur Ain Jemain. (2013) [Student Project] (Unpublished)

Space saving two side table with coffee table / Tuah Zulhelmi Johan. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard produced from admixture of acacia mangium and sentang (azadirachta excelsa) at different particle size / Shuhaila Johar. (2012) [Student Project] (Unpublished)

The effect of sealant as a finishing on a wood panel (plywood) / Shuhaili Johar. (2013) [Student Project] (Unpublished)

Effect of sealant on some finishing properties of commercial plywood / Shuhaili Johar, Shaikh Abdul Karim Yamani Zakaria and Norhafizah Rosman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Environmental impact assessment of raw material input and production process on Malaysian wood-based panel products / Syahirah Jusoh. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

K

Compact book rack made from kelempayan (neolamarckia cadamba) and blockboard/ Sadam Kahar. (2015) [Student Project] (Unpublished)

Compact book rack made from kelempayan (neolamarkia cadamba) and blockboard / Sadam Kahar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Potential of coconut sawdust as a new material for furniture product/ Mustaza Kamaludin. (2011) [Student Project] (Unpublished)

Mechanical and physical properties of particleboard made from oil palm empty fruit bunch / Mohamad Kamal Kamarudin. (2014) [Student Project] (Unpublished)

Oriented strand board side table / Kamilia Liyana Kamaruzaman. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Effects of age and height portion on the chemical properties of Buluh Semantan (Gigantochloa scortechinii) / Jamaludin Kasim, Abd Jalil Ahmad and Abd Latif Mohmod. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 2. pp. 6-13. ISSN 0128-5599

Some selected properties of bamboo thermoplastic composite: Influence of particle size, filler loading and maleated anhydride polypropylene addition / Jamaludin Kasim …[et al.]. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 126-134. ISSN 0128-5599

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Properties of urea-formaldehyde particleboard from particles of mixed timber species / Jamaludin Kasim, Ahmad Fauzi Othman and Shaikh Abdul Karim Yamani. (2005) Jurnal Gading, 9 (1). pp. 17-22. ISSN 0128-5599

Manufacture of melamine urea formaldehyde particleboard from hujan panas (croton argyratus) / Jamaludin Kasim … [et al.]. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 7. pp. 75-82. ISSN 0128-5599

Bending strength of mersawa at different tree portion / Salenda Kasim. (2012) [Student Project] (Unpublished)

Effect of tannin addition on the mechanical and physical properties of urea formaldehyde board: a review / Nurul Syahira Khabarin. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of thermoplastic composite using sesendok and kelempayan sawdust with different percentage of polypropylene / Faerul Hafiz Khairudin. (2011) [Student Project] (Unpublished)

Epoxy resin: coffee table from Casuarina equisetifolia slab / Imaduddin Khairul Aznam. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of medium density fiberboard (MDF) from sumble wood / Muhammad Hazwan Khalid. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

M

Strength properties of finger jointed wood from fast growing species / M Rafais M Razip. (2012) [Student Project] (Unpublished)

Strength properties of finger jointed wood from fast growing species / M Rafais M Razip, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of bio-composite product from acacia strand and coconut veneer / Siti Nadrah M. Omar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

The relevance of value chain analysis for SMEs : a case study / Sakthi Mahenthiran and Fatimah Bujang. (2003) Malaysian Accounting Review, 2 (1). pp. 46-56. ISSN 1675-4077

Properties of wood cement board (WCB) made from Sentang (Azadirachta excelsa) particles / Iffah Izzah Maidin. (2012) [Student Project] (Unpublished)

Crumple dining table / Umar Muzaffar Marzuki ...[et al.]. [Student Project]

Properties of oriented strand board made from banana pseudo stem (Musa acuminate colla (AA Group) cv. 'Lacatan') / Abdul Hadi Masod. (2013) [Student Project] (Unpublished)

Properties of finger joint effect by diferrent types of adhesive and alignment / Muhammad Shahedie Mat Anuar. (2014) [Student Project] (Unpublished)

Bamboo partition / Muhamad Shalihin Mat Dom. (2016) [Student Project] (Unpublished)

Properties of wood plastic composite using empty fruit bunch with different filler loading / Nurul Asmizah Mat Saat. (2008) [Student Project] (Unpublished)

Machining properties of treated oil palm lumber (elaeis guineensis jacq.) / Syazana Mat Saipuddin. (2014) [Student Project] (Unpublished)

Side table from oil palm lumber / Muhammad Arbain Mat Yuti and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multipurpose table for kids / Zulkhanain Mat Zain. (2015) [Student Project] (Unpublished)

Multipurpose table kids / Zulkhanain Mat Zain and Norhafizah Rosman. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from neolamarckia cadamba (kelempayan) / Ahmad Afiq Mat Zlan. (2014) [Student Project] (Unpublished)

Finishing properties of nitrocellulose (nc) on mersawa wood by steam treatment / Mazulizam Md Ali Hanapiah. (2013) [Student Project] (Unpublished)

Multifunction bookshelves combine with table study and chair / Mohd Amar Md Aliudin, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: UNSPECIFIED.

Pine board storage keeper / Mohamad Asyraaf Md Johari. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of laminated veneer lumber (LVL) from kelempayan (Neolamarckia cadamba) and rubberwood (Hevea brasiliensis) using different veneer combination and temperature / Nuraqila Shafiqah Md Nasir. (2016) [Student Project] (Unpublished)

Furniture design : Coffee table using recycle materials (solid wood waste) / Ahmad Shukry Md Razali. (2016) [Student Project] (Unpublished)

Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Natural finishing performance of acid catalysed (AC) and nitrocellulose (NC) on ludai (Sapium baccatum) wood / Nurul Wahida Md Said. (2011) [Student Project] (Unpublished)

Noise pollution in wooden furniture industry / Aishah Md Yunos. (2012) [Student Project] (Unpublished)

Noise pollution in wooden furniture industry / Aishah Md Yunos and Suhaimi Muhamed. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Phenol formaldehyde as binder for rubberwood oriented strand board (OSB) / Suffian Misran, Rafeadah Rusli and Rahim Sudin. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Challenges in oriented strand board R&D in Malaysia / Suffian Misran … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Multifunction rack made from kelempayan (neolamarkia cadamda) / Mohammad Faize Moftar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of laminated veneer lumber from oil palm trunk by using different adhesive/ Muhammad Najib Moh Yusoff. (2011) [Student Project] (Unpublished)

The strength of mortise & tenon and dowel joint from coconut trunk (Cocos nucifera) / Mohd Arif Fikri Mohamad Adnan. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Methods assessment for particle board properties: A review / Mohd Arif Fikri Mohamad Adnan , Ermadasila Mohamad and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Effect of tree portion and distance from pith on the physical properties of batai (Paraserianthes falcataria) / Suria Mohamad Akhir and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Rubberwood-rattan bench storage space saving / Nur Irdina Zulaikha Mohamad Zaid. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of particleboard from oil palm frond for exterior use / Ainil Idzaty Mohamed Anwar. (2013) [Student Project] (Unpublished)

Properties of acid catalyst lacquer on oil palm trunk (Elaeiss guineensis) surface / Muhammad Nabil Naufal Mohamed Nasim. (2014) [Student Project] (Unpublished)

Properties of medium density fiberboard (MDF) from sumble and eucalyptus wood / Nur ‘Aina Syifa’ Mohamed Sapari. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Physical properties of Kelempayan (Neomalarckia cadamba sp.) wood / Nur Sakinah Mohamed Tamat …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effects of mechanical properties and water resistance of particleboard from Kelempayan (Neolamarckia cadamba) wood with variation of hot pressing temperatures and board densities / Nur Sakinah Mohamed Tamat, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni, UiTM Cawangan Pahang.

Effect of allowance and adhesive on mortise and tenon joint / Nur Alia Naila Mohami. (2016) [Student Project] (Unpublished)

Finishing properties of multipurpose desk by using kelempayan (neolamarckia cadamba)/ Muhammad Imran Mohamod @ Muhd Apipi. (2014) [Student Project] (Unpublished)

Knockdown garden chair using cam fitting fastener / Muhammad Fahmi Mohd Fuad. (2019) [Student Project] (Unpublished)

Multi-purpose (MPs) chair / Nur Huda Husna Mohd Hasmy … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Physical and mechanical properties of oriented strand board from sugarcane rind / Mohammad Basyeer Mohd Mazlan. (2014) [Student Project] (Unpublished)

Effect of oven and microwave treatment on physico mechanical properties of kelempayan (Neolamarckia cadamba) / Maryam Mohd Radzi. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Console table made of wood off-cuts from Neolamarckia cadamba (Kelempayan) / Nurul Filzah Mohd Rahim. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Finishing properties of acid catalyst lacquer on Kelempayan (Neomalarckia cadamba) and Sesenduk (Endospermum sp) / Najwaa Mohd Sah. (2014) [Student Project] (Unpublished)

Multipurpose study table using blockboard / Nur Syuhada Amira Mohd Saripudin. (2014) [Student Project] (Unpublished)

Properties of Oriented Strand Board (OSB) from mix Acacia and Mahang with density of 700 kg/m3 / Siti Noor Hidayah Mohd Sidi. (2005) [Student Project] (Unpublished)

Finishing properties of Japanese table by using Kelempayan (neolamarckia cadamba) / Suraya Mohd Yusof. (2015) [Student Project] (Unpublished)

The properties of particle board from oil palm frond / Nur Aqeela Mohd Yussof. (2016) [Student Project] (Unpublished)

Souvenir product made from wood waste material / Fatin Nurbalqis Mohd Zainuddin. (2016) [Student Project] (Unpublished)

Screw withdrawal properties on particleboard from oil palm frond / Nur Shazana Atiqa Mohd Zamri. (2011) [Student Project] (Unpublished)

Mechanical and physical properties of reconstituted panel from oil palm frond at different age groups / Faizah Muhamad Fauzi. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Variation in fibre properties of wood under Malaysian dipterocarpaceae / Suhaimi Muhammed. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Wood quality assessment of rubberwood : The effect of clone and age on specific gravity and strength properties / Suhaimi Muhammed, Mansur Ahmad and Mohd Hamami Sahri. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 6. pp. 67-73. ISSN 0128-5599

Sifat fizikal dan struktur kayu: keunikan kayu dan keagungan tuhan / Suhaimi Muhammed and Rudaini Mohd Nawawi. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

Variation in fibre morphology and porosity of rubberwood (hevea brasiliensis) / Suhaimi Muhammed and Mohd. Hamami Sahri. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 6. pp. 40-45. ISSN 0128-5599

Fiber properties of kenaf (hibiscus cannabinus l.) grown between rubber trees / Suhaimi Muhammed … [et al.]. (2008) In: Proceedings STSS 2008 Broadening Horizons Through Research Science and Technology, 3-4 June 2008, M.S Garden Hotel Kuantan, Pahang.

Fiber properties of kenaf (hibiscus cannabinus l.) grown between rubber trees / Suhaimi Muhammed …[et al.]. (2008) In: Proceedings STSS 2008, 3-4 June 2008, M.S. Garden Hotel, Kuantan Pahang.

The performance of Kempas and Keruing in structural finger jointing / Suhaimi Muhammed and Wan Mahmood Wan Abdul Majid. (1999) GADING Jurnal UiTM Cawangan Pahang, 5 (2): 3. pp. 26-38. ISSN 0128-5599

Utilisation of veneer wastes in plywood construction from kelempayan / Muhamad Haniff Mukhtar. (2016) [Student Project] (Unpublished)

Fully jointed rack without the use of fasteners / Muhammad Faizal Musa. (2013) [Student Project] (Unpublished)

Properties of paper by different species of light wood endospermum.spp (sesenduk) and neolamarckia cadamba (kelempayan)/ Farhah Mustaffa. (2015) [Student Project] (Unpublished)

N

Properties of finger joint by different species and adhesive / Nik Muhammad Ashraf Nik Soh. (2014) [Student Project] (Unpublished)

Oriented strand board: research on performance pattern and usage trend in Malaysia / Nurul Syafiqkah Noh. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

R2R / Nor Baitie Nor Abidin … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 83.

Developing environmentally friendly furniture through life cycle analysis / Kamarulzaman Nordin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

O

Properties of acacia mangium wood cement board in relation to particle size and wood cement ratio / Ahmad Badrul Hisyam Omar. (2013) [Student Project] (Unpublished)

Puzzle storage chair: Multifunction furniture / Alias Omar, Norashikin Kamarudin and Nur Aza Farahin Amirruddin. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Mechanical and physical properties of wood cement board from oil palm trunk and rice husk in relation to particles: cement ratio / Fatin Amiera Omar. (2014) [Student Project] (Unpublished)

Anatomical, physical and mechanical properties of leucaena leucocephala wood / Mohd Hanif Othman. (2011) [Student Project] (Unpublished)

Xsibox (Extended Side Table With Storage) / Muhammad Zubair Othman. (2019) [Student Project] (Unpublished)

Physical and mechanical properties of gypsum-paper sludge board in furniture application / Norazleen Othman. (2011) [Student Project] (Unpublished)

P

Relationships between design and materials: mini showcase cabinet / Dora Paul Sajep. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip …[et al.]. (2015) In: UNSPECIFIED.

R

Thermal conductivity of gypsum board in proportion to kenaf fiber and polyvinyl alcohol (PVA) / Nurul Nazwa Rahmat. (2016) [Student Project] (Unpublished)

Review on properties of particleboard from wood particles and dried leaves / Raja Nazimuddin Shah Raja Yussuf Izzuddin Shah. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Finishing properties of Japanese table from (neolamarckia cadamba) / Athirah Razak. (2014) [Student Project] (Unpublished)

Properties of particleboard made from oil palm frond using different resin content and board density / Ahmad Naqi Razali. (2014) [Student Project] (Unpublished)

Effect of particle ratio of particle board from Kenaf core, Leucaena, and Rubberwood / Mohd Irwan Rosli. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

S

Nail withdrawal properties on particleboard from acacia (Acacia mangium) / Addi Aidileikhmal Salikun. (2011) [Student Project] (Unpublished)

Cold tack of urea formaldehyde resins as an important factor in plywood production / Aiman Syamil Sallehuddin. (2019) [Student Project] (Unpublished)

Properties of wood plastic composite using Mahang Gajah (macaranga gigantea) with different filler loading / Fatihah Samsudin. (2008) [Student Project] (Unpublished)

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core / Syed Muhammad Azlan Sayed Idrus. (2013) [Student Project] (Unpublished)

Writing table from medium density fibreboard (MDF) / Syuzaidi Shafia. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Multipurpose storage boxes using blockboard / Suhaizah Shaharuddin. (2014) [Student Project] (Unpublished)

Hidden storage side table with rattan open webbing for limited space / Norhafikah Sihabudin Surya. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Properties of oriented strand board from Kelempayan and Sentang / Suhaini Suria. (2014) [Student Project] (Unpublished)

Multipurpose bookshelf made from rubberwood species / Muhammad Haizul Ikram Syariman. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

T

Laundry strorage from pine wood / Muhammad Rifaie Thihaly. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan / Tuan Mohd Fakrul Razie Tuan Ismail and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

U

Withdrawal strength and physical properties of three layers hybrid particleboard / Mohd Hanafi Umar. (2012) [Student Project] (Unpublished)

W

Strength properties of engineered wood i-joist with finger jointed oriented strand board (osb) web and laminated veneer lumber flanges (lvl) / Wan Mohd Nazri Wan Abd Rahman and Mohd Ariff Jamaludin. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 3. pp. 14-23. ISSN 0128-5599

Potential forest plantation species: Leucaena leucocephala / Wan Mohd Nazri Wan Abd Rahman …[et al.]. (2009) In: UNSPECIFIED.

Early assessment: Trial plot study of leucaena lueucocephala / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Wettability of kelempayan (neolamarckia cadamba), sesenduk (endospernum diadenum) and ludai (sapium baccatum), using distilled water, urea formaldehyde and phenol formaldehyde/ Wan Normardiyana Wan Abdullah. (2011) [Student Project] (Unpublished)

Properties of hybrid particleboard from acacia mangium and petai belalang using phenol formaldehyde resins / Wan Hazwani Wan Hassan, Jamaludin Kasim and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multifunctional storage with table and chair / Wan Muhammad Hilmi Wan Ibrahim, Norhafizah Rosman and Hanani Yuhaniz. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of wood plastic composites made from rubberwood sawdust / Wan Mohd Norsafizu Wan Mohd Nor. (2012) [Student Project] (Unpublished)

Properties of particleboard from fresh and degraded acacia wood/ Wan Mohammad Hanif Wan Mohd Yusoff. (2015) [Student Project] (Unpublished)

The potential of traditional Malay woodcarving as a cultural heritage tourism product in Kuala Terengganu / Wan Najihah Wan Nordin, Ahmad Nazrin Aris Anuar and Rohaslinda Ramele Ramli. (2022) ESTEEM Journal Of Social Sciences And Humanities, 6 (2). pp. 30-44. ISSN 2600 7274

Properties of hybrid particleboard from acacia mangium and oil palm trunk / Wan Jamalludin Wan Omar, Jamaludin Kasim and Zaimatul Aqmar Abdullah. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Y

The display kitchen ware rack furniture (finishing and coating) / Noor Azlina Yaacub. (2003) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599

Properties of keruing belimbing-polypropylene composites / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Siti Nor Haslina. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

Blueprint : Easy Sdn Bhd “Space-Saving Plastic Bag Storage Box” / Nurul Anies Suraya Young Rockie. (2020) [Entrepreneurship Project] (Submitted)

Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Z

Safe space wall mounted desk / Muhammad Haziq Zaidi. (2022) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Physical and mechanical properties of three-layer particleboard from oil palm frond (OPF) / Norfazlina Zainal. (2011) [Student Project] (Unpublished)

Physical and mechanical properties of three layer particleboard from oil palm frond / Norfazlina Zainal, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Design of multifunction bench and picnic table/ Muhammad Khalaf Zakaria. (2014) [Student Project] (Unpublished)

Fibre morphology, physical and chemical properties of Gliricidia sepium / Shaikh Abdul Karim Yamani Zakaria, Jamaludin Kasim and Nik Aziz Nik Mat. (2004) In: Prosiding KONAKA Konferensi Akademik 2004, 17-19 Disember 2004, Impiana Beach Resort, Cherating, Kuantan.

Properties of wood plastic composites made from sesendok/ Mohammad Bakri Zulkifili. (2011) [Student Project] (Unpublished)

Survey of musculoskeletal disorder (MSD) among people in Kota Setar / Asyraf Ikhmal Zulkifli. (2013) [Student Project] (Unpublished)