Items where Subject is "Wood technology. Lumber"

Article

Kajian hubungan modulus keanjalan dan modulus kepecahan bagi kayu keruing berskala penuh dan berskala kecil / Marzuki Ab. Rahman, Wan Mohd Nazri Wan Abdul Rahman and Mohd Shukari Midon. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 29-37. ISSN 0128-5599

Some selected properties of bamboo thermoplastic composite: Influence of particle size, filler loading and maleated anhydride polypropylene addition / Jamaludin Kasim …[et al.]. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 126-134. ISSN 0128-5599

Effects of bamboo density and chemical properties on the properties of particleboard produced from Giganfochloa Scortechinii / Jamaludin Kasim and Abd. Jalil Hj. Ahmad. (2005) Jurnal Gading, 9 (1). pp. 91-100. ISSN 0128-5599

Physical and mechanical properties of thermoplastic composite from oil palm trunk / Jamaludin Kasim …[et al.]. (2006) Jurnal Gading UiTM Pahang, 10 (1). pp. 69-76. ISSN 0128-5599

Effects of age and bamboo portion on the ash and silica content of Buluh Semantan (Gigantochloa Scortechinil) / Jamaludin Kasim and Nor Asikir Mamat. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 19-24. ISSN 0128-5599

Properties of urea-formaldehyde particleboard from particles of mixed timber species / Jamaludin Kasim, Ahmad Fauzi Othman and Shaikh Abdul Karim Yamani. (2005) Jurnal Gading, 9 (1). pp. 17-22. ISSN 0128-5599

Mechanical and dimensional properties of bamboo (Gigantochloa Scortechinii) fiber - thermoplastic composite / Jamaludin Kasim, Veronica Sintan and Abd. Latif Mohmod. (2005) Jurnal Gading, 9 (1). pp. 131-138. ISSN 0128-5599

Mechanical and physical properties of araucaria fibre-polypropylene composite / Jamaludin Kasim, Wan Nazri Wan Abd Rahman and Suriana Husin. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 1-9. ISSN 0128-5599

Air quality in wood-based small and medium enterprises in Selangor / Noradila Mohamed ... [et al.]. (2018) Science Letters (ScL), 12 (2): 5. pp. 38-44. ISSN (eISSN): 2682-8626

The effect of different types of filler on the mechanical and physical properties of wood plastic composite from eucalyptus spp / Noorshashillawati Azura Mohammad...[et al.]. (2019) Gading Journal for Science and Technology, 2 (1). pp. 52-59. ISSN 2637-0018

The gas-phase treatment of rubberwood / Suhaimi Muhammed. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 67-75. ISSN 0128-5599

Improved properties of Oil Palm Trunk (OPT) Laminated Veneer Lumber (LVL) through the inclusion of rubberwood veneers / Kamarulzaman Nordin ... [et al.]. (2004) Science Letters, 1 (1). pp. 51-56. ISSN 1675-7785

A study on the veneer recovery rate in a plywood plant / W. Mohd Nazri W. Abdul Rahman and Mohd Ariff Jamaludin. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 152-160. ISSN 0128-5599

The potential of traditional Malay woodcarving as a cultural heritage tourism product in Kuala Terengganu / Wan Najihah Wan Nordin, Ahmad Nazrin Aris Anuar and Rohaslinda Ramele Ramli. (2022) ESTEEM Journal Of Social Sciences And Humanities, 6 (2). pp. 30-44. ISSN 2600 7274

Book Section

Buluh Betong for the production of Peeled Bamboo-Fiberglass Composite (PBFC) / Mohd Aminuddin Che Haron … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 148. (Submitted)

Multi-purpose (MPs) chair / Nur Huda Husna Mohd Hasmy … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Conference or Workshop Item

The effects of tree portion on extractive content of Kelempayan (Neomalarckia cadamba sp.) wood / Nurfaizah Abd Latib, Nur Sakinah Mohamed Tamat and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Jamaludin Kasim …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Finishing properties of acid catalyst lacquer on Oil Palm Lumber (OPL) / Mazlin Kusin … [et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Strength properties of finger jointed wood from fast growing species / M Rafais M Razip, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Hybrid coffee tabletop from off-cut tree branches and epoxy resin / Siti Zalifah Mahmud ... [et al.]. (2020) In: International Innovation, Invention and Design Competition, 17 May-10 Oct 2020.

Side table from oil palm lumber / Muhammad Arbain Mat Yuti and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Fibre morphological properties of Kelempayan (Neomalarckia cadamba sp.) wood / Siti Nadzirah Misfar and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Methods assessment for particle board properties: A review / Mohd Arif Fikri Mohamad Adnan , Ermadasila Mohamad and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Physical properties of Paraserianthes falcataria / Suria Mohamad Akhir and Jamaludin Kasim. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

Bending strength of finger joint from kelempayan (neomalarkia cadamba) and ludai (sapium baccatum) / Nik Amirul Fadzil Mokhtar and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Sifat fizikal dan struktur kayu: keunikan kayu dan keagungan tuhan / Suhaimi Muhammed and Rudaini Mohd Nawawi. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

Study on drying of oil palm trunk with ethanol / Fauzi Othman … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Thesis

Properties of oil palm trunk particleboard with light hardwood veneer overlaid / Nurrohana Ahmad. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

The physical and mechanical properties of rice husk/ recycled plasticised polyvinyl chloride compression moulded composite at various filler loadings and particle sizes / Farah Nordyana Azizul Rahman. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Design & fabrication of impact testing equipment for wood pallet / Mohd Fairuz Ismail. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Environmental impact assessment of raw material input and production process on Malaysian wood-based panel products / Syahirah Jusoh. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Integrated timber harvesting information and planning system using geographical information system technology / Zubaidah Mansur. (2006) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical and physical properties of wood polypropylene composites from three Malaysian wood species / Mohd Faizal Mohd Arif. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical and physical properties of reconstituted panel from oil palm frond at different age groups / Faizah Muhamad Fauzi. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Properties of oriented strand board from petai belalang (Leucaena leucocephala) wood / Wan Mohd Nazri Wan Abdul Rahman. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

Student Project

Properties of particleboard from dried leaves and eucalyptus pellita / Muhamad Haziq Ab Karim. (2019) [Student Project] (Unpublished)

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab Manan. (2015) [Student Project] (Unpublished)

Finishing properties of Mahang Gajah (macaranga gigantea) by using different finishing systems and abrasive papers / Nur Azlina Abdul Basit. (2016) [Student Project] (Unpublished)

Mechanical properties of bamboo strip composite by different portion of bambusa blumeana for archery limb production / Mohammad Hasif Abdull Latif. (2016) [Student Project] (Unpublished)

Product design : Mirror frame from Buluh Semantan (gigantochloa scorchtechinii) / Muhamad Hisyam Ahmad. (2016) [Student Project] (Unpublished)

Effect of different relative humidity on physical and mechanical properties of moulded laminated coconut veneer lumber (LCVL) backrest / Ahmad Fahmi Ahmad Razan. (2010) [Student Project] (Unpublished)

Mechanical, physical and screw withdrawal properties of engineered wood structure / Nur Shafiqah Ahmad Rosli. (2016) [Student Project] (Unpublished)

Epoxy coffee table with wood disc decoration / Muhammad Akmal Anuar. (2019) [Student Project] (Unpublished)

Properties of particleboard from coconut coir and empty fruit bunch (EFB) / Rusilma Arnie. (2016) [Student Project] (Unpublished)

Particleboard properties from 2.0mm wood waste particle size in relation to different board density and resin content / Ahmad Hafizuddin Asha'ari. (2016) [Student Project] (Unpublished)

Foldable laptop table / Muhammad Azman Azamy. (2019) [Student Project] (Unpublished)

Chess square table / Amy Saiful Affendy Azhar Ahmad. (2016) [Student Project] (Unpublished)

Properties of cement board made from various sizes of oil palm trunk strands / Nurnabilah Hanee Che Ab Rahim. (2016) [Student Project] (Unpublished)

Particulate matters and lung function performances in wood based industries / Nurul Aziemah Che Nazir. (2014) [Student Project] (Unpublished)

Effect of portion and oven dry exposure towards surface roughness and bending strength of dendrocalamus asper / Mohd Hafiz Chek Romli. (2013) [Student Project] (Unpublished)

Performance of wood joint from two selected timber species / Izharrashid Ghazali. (2016) [Student Project] (Unpublished)

Finishing properties of a bookshelf from Kelempayan (neolamarckia cadamba) / Nurfarhana Hamdan. (2014) [Student Project] (Unpublished)

Properties of oriented strand board (OSB) from acacia mangium and rubberwood / Zainab Haris. (2015) [Student Project] (Unpublished)

The effect of quick drying test on mersawa species / Nor Afizah Ibrahim. (2012) [Student Project] (Unpublished)

Bending properties of finger jointed from oil palm lumber (OPL) / Izwan Ismail. (2012) [Student Project] (Unpublished)

Factors affecting formaldehyde emission in particleboard manufacturing / Mohd Zahid Jaafar. (2016) [Student Project] (Unpublished)

Properties of neolamarckia cadamba plywood made with phenol formaldehyde (PF) resin / Siti Kamilah Junaidi. (2016) [Student Project] (Unpublished)

Expandable table from wooden pallet / Ahmad Safwan Kamaruzaman. (2018) [Student Project] (Unpublished)

DIY console table / Amirun Rafiq Khairul Anuar. (2019) [Student Project] (Unpublished)

Strength properties of finger jointed wood from fast growing species / M Rafais M Razip. (2012) [Student Project] (Unpublished)

Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density / Mazlinda Marzuki. (2015) [Student Project] (Unpublished)

Bamboo partition / Muhamad Shalihin Mat Dom. (2016) [Student Project] (Unpublished)

Side table from oil palm lumber (OPL) (Elaeis guineensis) / Muhammad Arbain Mat Yuti. (2015) [Student Project] (Unpublished)

Furniture design : Coffee table using recycle materials (solid wood waste) / Ahmad Shukry Md Razali. (2016) [Student Project] (Unpublished)

Machining properties of 25 and 50 years old treated oil palm lumber / Muhamad Hafiz Md Saad. (2015) [Student Project] (Unpublished)

Performance of adhesive formulation using glutinous, sago and tapioca flour / Alain Dillon Anak Michael Jopie. (2019) [Student Project] (Unpublished)

Properties of laminated veneer lumber from oil palm trunk by using different adhesive/ Muhammad Najib Moh Yusoff. (2011) [Student Project] (Unpublished)

Properties of particleboard from oil palm trunk in relation to various sizes of particles / Fatin Nadhirah Mohamad. (2016) [Student Project] (Unpublished)

Multipurpose frame storage from wooden pallet (pinus radiata) / Mohd Fais Mohd Faizu. (2019) [Student Project] (Unpublished)

Properties of moisture resistance kelempayan neolamarckia cadamba based plywood / Mohamad Sukri Mohd Nor Samawi. (2016) [Student Project] (Unpublished)

Properties of particle and strand board from hevea brasiliensis and leucaena leucocephala / Muhammad Rahman Mohd Tahir. (2012) [Student Project] (Unpublished)

Bending strength of finger joint from neomalarkia cadamba and sappium baccatum/ Nik Amirul Fadzil Mokhtar. (2011) [Student Project] (Unpublished)

Properties of finger joint by different species and adhesive / Nik Muhammad Ashraf Nik Soh. (2014) [Student Project] (Unpublished)

Potential of leucaena leucocephala wood as a source of renewable energy / Nur Saidah Nordin. (2013) [Student Project] (Unpublished)

Sheet chair technology from pine wood species / Mohamad Hazlin Nurul Huda. (2019) [Student Project] (Unpublished)

Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman. (2013) [Student Project] (Unpublished)

The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip. (2015) [Student Project] (Unpublished)

Effects of hot and cold condition on finishing properties of Mahang Gajah (macaranga gigantae) / Nur Liyana Izzati Rohaffin. (2016) [Student Project] (Unpublished)

Wood plastic composite using rice husk at different filler loading / Nur Balquis Rosli. (2016) [Student Project] (Unpublished)

Epoxy coffee table from sindora spp. / Muhammad Noor Sadiman. (2019) [Student Project] (Unpublished)

Morphological characteristic of Ludai (sapium baccatum) / Nur Farahin Salleh. (2016) [Student Project] (Unpublished)

Mechanical, physical and working properties of particleboard made from tropical wood wastes / Nur Nazihan Sofian. (2016) [Student Project] (Unpublished)

Particle board from wood waste with size particle (1.0 mm) in relation to different board density and resin content / Mohd Shuaib Azali Zulkepli. (2016) [Student Project] (Unpublished)

Stackable keeper using wooden pallet / Shofiyah Zulkifli. (2019) [Student Project] (Unpublished)

Entrepreneurship Project

Blueprint : Easy Sdn Bhd “Space-Saving Plastic Bag Storage Box” / Nurul Anies Suraya Young Rockie. (2020) [Entrepreneurship Project] (Submitted)

Research Reports

Comparative studies of elastic properties of commercial-type woods / Azman Kasim, Amran Shafie and Azhan Hashim @ Ismail. (2006) [Research Reports] (Unpublished)

Properties of oriented strand board (OSB) from Ludai and Kelempayan / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2004) [Research Reports] (Unpublished)