Items where Division is "Faculty of Mechanical Engineering" and Year is 2018

Article

On the Effect of Central Jet in Solid Cone Pressure-Swirl Atomizers / Ahmad H. A. Hamid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 260-271. ISSN 18235514

The effect of injection pressure on the droplet size distributions and micro-explosion / Mhadi A. Ismael ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 91-102. ISSN 18235514

Relationship between time domain and frequency domain strain signal – Application to real data / A. A. A. Rahim ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 178-191. ISSN Special Issue Advances in Engineering and Technology Vol 6

Sonication time effect towards stability of Al2O3/PAG and SiO2/PAG Nanolubricants / A.A.M. Redhwan..[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 14-27. ISSN 1823-5514 ; 2550-164X

Tribology Investigation of Automotive Air Condition (AAC) compressor by using Al2O3/PAG Nanolubricant / A.R.M. Aminullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 49-61. ISSN 1823-5514 ; 2550-164X

Hardness, tensile and microstructure assessment of carbon/glass hybrid composite laminate / Ahmad Fuad Ab Ghani and Jamaluddin Mahmud. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 91-105. ISSN 1823-5514 ; 2550-164X

Comparison on polymerization of bulk-fill composite resins in different marginal thickness of tunnel restoration / SM Ab Ghani ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 65-79. ISSN 18235514

The Comparison Study of Handgrip Pressure on Steering Wheel National Cars / Mohd Hidayat Ab Rahman ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 89-105. ISSN 18235514

A Study on Cryogenic Supercritical Carbon Dioxide Coolant Delivery Technique when Machining of AISI 1045 Steel / Erween Abd Rahim ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 37-49. ISSN 18235514

Simulation study on the vehicle speed control in longitudinal direction using a new Continuously Variable Transmission (CVT) System / Muhammad Luqman Hakim Abd Rahman ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 127-146. ISSN 18235514

Performance of Semi Active Lateral Control (SALC) algorithm for semi active suspension system in multibody co-simulation method / M. M. Abdul Majid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 45-65. ISSN 18235514

Medical Implant Production using Three-Dimensional Printing as a Potential Manufacturing Process in Medical Application / Siti Norsyahirah Abdul Razak ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 232-246. ISSN 18235514

The effects of 0.16 % Chromium + 1.32 % Nickel addition on austempered ductile Iron for mechanical properties and slurry erosion / Bulan Abdullah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 108-120. ISSN Journal of Mechanical Engineering (JMechE)

Observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact / M.F. Abdullah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 129-141. ISSN 18235514

Investigation on user experience goals for joystick interface design / Ummi Noor Nazahiah Abdullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 133-142. ISSN 1823-5514 ; 2550-164X

Thermal properties characteristics of MWCNT-OH based Nanofluids in mixture of Ethylene Glycol and Deionized water / Amirah Abdullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 53-71. ISSN 1823-5514 ; 2550-164X

Tribological Effects of Additive Hybrid ZrO2/Al2O3 in Bio-Lubrication / Mimi Azlina Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 35-43. ISSN 18235514

Performance comparison between skyhook and semi active damping force estimator (SADE) algorithms for semi active suspension system / S. A. Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 143-159. ISSN 18235514

Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 123-140. ISSN 18235514

Characterisation of Stress Intensity Factor with Magnetic Flux Signal Leakage in Stable Fatigue Crack Growth Region S. R. Ahmad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 141-155. ISSN 18235514

A comparison between ISOFIX and seatbelt installation methods for child restraint system on child occupant performance / Y. Ahmad ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 131-141. ISSN 18235514

Electromyography analysis for assessment of lower extremity muscles during squat and stoop movement / Nurul Atma Athirah Ahmad Azali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 80-94. ISSN 18235514

Wave-Based Substructuring Method for Dynamic Behaviour Investigation of Solid Meshing Based Finite Element Model of a Structure / Ahmad Burhani Ahmad Basri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 176-186. ISSN Special Issue Advances in Engineering and Technology Vol 5 (Submitted)

Effect of sodium silicate on the dimensional stability and mechanical behaviour of non-woven flax reinforced acrylic based polyester composites / Mohd Fadli Ahmad Rasyid... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 233-245. ISSN 18235514

QFD-Operational research as an integrated method for developing product design process in one-of-a-kind production / Mohaddeseh Ahmadipourroudposht... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 153-173. ISSN 18235514

Design and development of image based lane warning and anti-collision detection system / M.W. Ahmed ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 95-105. ISSN 18235514

Experimental analysis of racing car chassis for Modal Identification / M. N. Aizat Zainal ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 203-216. ISSN 18235514 (Submitted)

Performance of Polycaprolactone/Hydroxyapatite (PCL/HA) Composite Blended by Ultrasound Assisted Melt Blending / Suffiyana Akhbar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 235-250. ISSN 18235514

Adaptive Neuro Fuzzy Inference System (ANFIS) modelling for quality estimation in palm oil refining process / Nur Syuhada Ali ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 36-47. ISSN 18235514

Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+M) using manual GMAW followed by HFMI/PIT / Dahia Andud... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 205-222. ISSN 18235514

Design, Modeling and Simulation of a High-Pressure Gasoline Direct Injection (GDI) Pump for Small Engine Applications / Amin Mahmoudzadeh Andwari ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 107-120. ISSN 18235514

Critical experimental issues of cracked aluminum beam in operational modal analysis / M. Azhan Anuar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 211-225. ISSN 18235514

Experimental study of Bias Acoustic Liner on nacelle lip-skin/ Qummare Azam ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 67-77. ISSN 18235514

Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 12-24. ISSN 18235514

A numerical investigation of mechanical response of unfilled styrene butadiene rubber by static straight blade indentation / B. Setiyana...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 43-51. ISSN 1823-5514 ; 2550-164X

Parameter characteristic of desktop laser engraving kit machine: A review / NS Badrishah, N Sa’ude ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 56-68. ISSN 18235514

Performance of Coated Carbide Tools when Turning Inconel Alloy 718 under Cryogenic Condition using RSM / N. Badroush ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 73-87. ISSN 18235514

Overview and Case Study of Cryogenic Cooling in Machining of Nickel Based Alloy / N. Badroush ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 187-204. ISSN 18235514

Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 174-188. ISSN 18235514

Proposed low power consumption of power monitoring and management system embedded RFID with WSN and IoT Technologies / Wasana Boonsong... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 120-132. ISSN 1823-5514 ; 2550-164X

The Effect of Adding Carbon and Vanadium Carbide on Microstructure and Mechanical Properties of Ultra-Fine WC-Co Composite / Salina Budin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 25-36. ISSN 18235514

Evaluation of Torsional Vibration on Vertical-type Centrifugal Pump Shaft / Hendri Chandra ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 167-175. ISSN 18235514

A Fault Diagnosis Expert System for Building Cooling Tower / Chee Nian Tan..[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 233-247. ISSN 18235514

Low cycle fatigue of hybrid woven Kenaf Fiber reinforced epoxy composite with 1% addition of Silica Aerogel / Chok., E.Y.L. and Majid., D.L.A.A. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 73-89. ISSN 1823-5514 ; 2550-164X

Strategy on the production of bead-free electrospun gelatin scaffolds / Chung She Man ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 696-79. ISSN 18235514

Tumble Motion Evolution for GDI Engine using Particle Image Velocimetry (PIV) / Mohammed EL-Adawy ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 191-201. ISSN 18235514

Changes in the structure and mechanical properties of bone tissues obtained from experimental animal models of lifestyle-related diseases / Ei Yamamoto and Yuki Kawamura. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 226-234. ISSN 18235514

Design optimization for mass sizing of LEO communication satellites / Luqman Fathurrohim...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 47-58. ISSN 1823-5514 ; 2550-164X

Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite / Muhamad Fitri and Shahruddin Mahzan. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 223-232. ISSN 18235514

Evaluation of water-in-diesel emulsion fuel blended with metal additives in a diesel engine / J. B. Fletcher ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 21-31. ISSN 18235514

Validation of a suspension model and its elastic behaviour demonstrated at the formula student race car of the University Duisburg-Essen / Frédéric Etienne Kracht ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 35-57. ISSN 18235514

Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 239-247. ISSN Journal of Mechanical Engineering (JMechE)

Virtual Manufacturing as Tool for Material and Process Developments and Optimizations / Marcel Graf ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 33-59. ISSN 18235514

Performance study of adsorption cooling system driven by waste heat from automobile engine / Khairul Habib and Nurul Afiqah Kamaruzzaman. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 79-89. ISSN 18235514

Fire simulation of a scaled Mass Rapid Transit (MRT) tunnel / Razieh Khaksari Haddad ... (et al.). (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 1-17. ISSN 18235514

Study on surface roughness quality of FDM and MJM additive manufacturing model for implementation as investment casting sacrificial pattern / MN Hafsa ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 25-34. ISSN 18235514

Characterization of a Magnetorheological Fluid Damper Applied to Semi-Active Engine Mounting System / M. Hafiz Harun...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 248-259. ISSN 18235514

Porosity effects of AlSi 10mg parts produced by selective laser melting / Noreriyanti Hasmuni ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 246-255. ISSN 18235514

Effect of drill geometry and drilling parameters on the formation of adhesion layer in drilling composite-metal stack- up material / M H Hassan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 90-98. ISSN 18235514

Production and applications of biodiesel from high acid value feedstocks / Zulkafli Hassan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 10-15. ISSN 18235514

Currency identification assistant for visually impaired / Nabill Hidzir Pauzi and Shahrul Azam Abdullah. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 156-164. ISSN 1823-5514 ; 2550-164X

Development of a quantitative evaluation method in occupational therapy exercise for upper limb motor function rehabilitation / Hokyoo Lee ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 258-274. ISSN 18235514

Evaluation of four-wheel vehicle driven by lower limb with electric pedalling assistance for elderly people / Hokyoo Lee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 29-43. ISSN 18235514

Design of Jig for Coordinate Measuring Machine / Norasikin Hussin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 97-107. ISSN 18235514

An experimental investigation of tensile properties and fatigue crack growth behaviour for Dual-Phase Steel / Roslinda Idris...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 155-167. ISSN 1823-5514 ; 2550-164X

Fe-Al Diffusion Bonding: Effect of reaction time on the interlayer thickness / Asmawi Ismail...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 80-91. ISSN 1823-5514 ; 2550-164X

Performance of shallow borehole of spiral-tube ground heat exchanger / Jalaluddin, Rustan Tarakka and Akio Miyara. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 41-52. ISSN 1823-5514 ; 2550-164X

Characterization of Hybrıd Yarn / Fabrıcs From of Kenaf-Kevlar Fibers / Sharoul Jambari ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 256-267. ISSN 18235514

Mathematical modelling and design of counterweights for unbalanced links / Abdullah Jamil ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 157-166. ISSN 18235514

Foot strike pattern in sport shoes with different construction / Soňa Jandová...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 29-39. ISSN 1823-5514 ; 2550-164X

Performance analysis of a direct injection diesel engine using Biodiesel and additives / Desmond Jayson ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 67-80. ISSN 18235514

Development and analysis of face recognition system on a mobile robot environment / Jit Shen Quah and Mariam Md Ghazaly. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 169-189. ISSN 1823-5514 ; 2550-164X

Microstructural and Mechanical Properties of Underwater Wet Welded SS400 Steel / N. M. L. P. K. Yasari ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 168-179. ISSN 18235514

Effects of mean stress on the durability assessment for an automobile crankshaft using Markov Chain Modelling Technique / S.S. K.Singh and S. Abdullah. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 19-28. ISSN 18235514

Experimental investigations on the performance of a single slope solar still coupled with flat plate solar collector under Malaysian conditions / Zainal Abidin Kamarul Baharin and Muhammad Hafiz Mohammad. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 16-24. ISSN 18235514

Development of Optical Bone Densitometry Using Near-infrared Light / Kaname Miura ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 60-67. ISSN 18235514

Identification of Freeform Depression Feature in a Part Using Vertex Attributes From Feature Volume / Pramod S Kataraki and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 217-231. ISSN 18235514

Corrosion Behavior of Heat Treated Nanocrystalline Co Ni Fe Coating on Stainless Steel / Koay Mei Hyie...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 191-203. ISSN 18235514

Green Lean TQM Islamic Process Management Practices In Malaysian Food Companies / Nur Asiah Kuzaiman...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 12-22. ISSN 18235514

Developing New Lab Base Teaching Approach for Linear Algebra subject in Engineering Mathematics Courses / N. Lohgheswary ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 220-232. ISSN 18235514

Quality Function Deployment for New Standing Cabin Concept of Commercial Transport Aircraft / Norhafizah M. Dasuki and Fairuz I. Romli. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 247-257. ISSN 18235514

Assessing Technique Applicability towards Ideation Taxonomy for Engineering Design Concept / N. M. M. Rasidi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 201-219. ISSN 18235514

Classification of Fatigue Damaging Segments Using Artificial Neural Network / M. F. M. Yunoh ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 61-72. ISSN 18235514

Hardness of Flowable Resin Composite from Rice Husk / Nazrul M. Yusoff ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 181-190. ISSN 18235514

Experimental Investigation on SI Engine Emissions via EGR and catalytic converter with air injection mechanism / MVS Murali Krishna...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 33-46. ISSN 1823-5514 ; 2550-164X

Determining Damaging Fatigue Cycles under Influence of Random Loadings using the Root-Mean-Square Level / M. Mahmud ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 156-167. ISSN 18235514

A prototype development of anti-hunchback device / Nurul Ain Maidin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 192-209. ISSN 1823-5514 ; 2550-164X

Tensile Properties of Nanoclay (NC)-Acrylonitrile Terminated Polybutadiene (ATBN) Modified Epoxy Composites / Siti Nur Liyana Mamauod ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 44-52. ISSN 18235514

Effects of Temperature Changes, Air Velocities and Volume Fractions on the Single Droplet Evaporation Behaviors at High Ambient Temperatures / W. Manosroi. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 1-19. ISSN 18235514

Effect of sintering temperatures on microstructural changes and phase transformation of nearly equiatomic microporous NiTi Alloy produced by metal injection moulding / Mashitah Maso’od ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 115-126. ISSN 18235514

Validation study on external wind noise prediction using OpenFOAM / Mohamed Sukri Mat Ali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 111-126. ISSN 18235514

Investigation of Renewable Polymer Composite from Waste Oil Endurance to UV Irradiation Exposure by using FTIR and UV-Vis / Nik Normunira Mat Hassan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 53-61. ISSN 18235514

Simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine / Norhidayah Mat Taib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 81-93. ISSN 18235514

Structure Fabricated using Entry Level 3D Printer / Siti Nur Humaira Mazlan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 98-122. ISSN 18235514

An integrated vendor-buyer model subject to supply disruption with transportation cost / Noraida Azura Md Darom ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 241-258. ISSN 18235514

The development of low-cost Cloud-Based CO2 Monitoring System for green city application / Mohamad Hanif Md Saad ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 259-268. ISSN 18235514

Heat transfer performance of Tio2–SiO2 Nanofluid in water-ethylene glycol mixture / Muhammad Nabil Fikri Mohamad...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 39-48. ISSN 1823-5514 ; 2550-164X

Image enhancement process on digital radiographic image with weld discontinuities / Shahidan Mohamad and Suhaila Abd Halim. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 275-292. ISSN 18235514

Time-frequency strain data analysis of suspension using the Hilbert-Huang transform / Nadia Nurnajihah Mohamad Nasir ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 59-77. ISSN 18235514

Optimizing sintering process to produce highest density of porous Ti-6Al-4V / Nor Hafiez Mohamad Nor ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 44-55. ISSN 18235514

Preparation of Siam Weed extracts / Nor Shamsiah Mohamed and Koh Ching Theng. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 268-274. ISSN 18235514

Estimation method of heating value properties on variations of alcohol-gasoline blends and volume percentages / Muhammad Syarifuddin Mohamed Zaharin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 20-35. ISSN 18235514

Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 189-204. ISSN 18235514

Fatigue Life Assessment of SAE 1045 Carbon Steel under Strain Events using the Weibull Distribution / Mazian Mohammad...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 165-180. ISSN 1823-5514 ; 2550-164X

The effects of cooling slope on the semi-solid microstructures of Al4.8Si2.8Cu0.5Mg aluminium alloy / Mohd Anif Mohd Arif ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 231-239. ISSN 18235514

Dispersion stability of hBN Nanoparticle in liquid phase with different dispersion agents / Al Alif Elmi Mohd Nawi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 143-153. ISSN 1823-5514 ; 2550-164X

The length scale effect between wall and closes field point on a single turbine blade simulation / Mohd Hafiz Mohd Noh ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 155-166. ISSN 18235514

A new phenomenological-based rate-dependent hysteresis operator for hysteresis characterization / Mohd Hanif Mohd Ramli and Mohd Azuwan Mat Dzahir. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 142-153. ISSN 18235514

Durability Studies of Remanufacturable Components for Extended Life Cycle / Ammer Ezhar Mohd Razalli ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 177-189. ISSN 18235514

Freestream Velocity Correction in Narrow Channels / Helmey Ramdhaney Mohd Saiah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 54-66. ISSN 18235514

A case study on the improvement of productivity and efficiency of a quality control line for a cutting tool manufacturer / Muhammad Farhan Mohd Suhaimi and Noor Azlina Mohd Salleh. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 222-239. ISSN 1823-5514 ; 2550-164X

3D angle interlock woven fabric mechanical tensile strength based on various fabric weft densities / Muhammad Nasrun Faris Mohd Zulkifli and Mohamad Faizul Yahya. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 92-103. ISSN 1823-5514 ; 2550-164X

Polyvinyl Alcohol/Chitosan/Silicon Dioxide (PVA/CS/Sio2) Beads For Removal Of Chromium (VI) Ions / Rizamarhaiza Muda...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15. pp. 71-79. ISSN 1823-5514 ; 2550-164X

The effect of slurry erosion wear on boronized alloyed ductile iron (0.019 % Niobium and 0.145 % Vanadium) / Khalissah Muhammad Yusof ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 121-130. ISSN 18235514

Effect of Tool Plunge Depth and Pin Profile on Mechanical Properties of Friction Stir Spot Welded AA5052 Joints / Nurul Muhayat...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 181-191. ISSN 1823-5514 ; 2550-164X

Online strain measurement during blown film extrusion using digital image correlation / Komethi Muniandy ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 154-165. ISSN 18235514

Moisture Absorption Properties and Shock Cushioning Characteristics of Bio-Based Polyurethane Foam Composites / David, N.V and Mohd Azlan. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 157-168. ISSN 18235514

Thermo-physical properties of metal oxides composite Nanolubricants / N.N.M. Zawawi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 28-38. ISSN 1823-5514 ; 2550-164X

Aerodynamics Performance of Barn Swallow Bird at Top Speed : A Simulation Study / M.R.M. Nawi and M.S.A. Azhar. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 1-15. ISSN Journal of Mechanical Engineering (JMechE)

Hybrid vehicle engine misfire detection using Piezo-film Sensors and analysing with Z-freq / Nor Azazi Ngatiman and Mohd Zaki Nuawi. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 269-285. ISSN 18235514

Fuel consumption reduction by increasing thermal efficiency through heating of fuel / Edmund Hilary Nicholas ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 103-110. ISSN 18235514

Preliminary analysis of benzene, toluene, ethylbenzene, O-Xylene (BTEX) and formaldehyde inside vehicle cabin / Noor Hafiz Noordin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 80-99. ISSN 18235514

PLC system to optimize training device of upper limb spasticity / Nurul Atiqah Othman...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 127-141. ISSN 1823-5514 ; 2550-164X

Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 99-115. ISSN 18235514

Application of cryogenic grinding for filler preparation in the form of Coconut Nanocomposites into the Thermoplastic Matrix with the evaluation of properties while using different types of MAgPP Coupling agents / Petr Lenfeld...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 13-27. ISSN 1823-5514 ; 2550-164X

Parameter optimization of metal injection moulding : A review / M Prathabrao ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 100-114. ISSN 18235514

Characterization of Aluminium-Silicon (Al-Si) cast alloy refined with Titanium Diboride (TiB2) and Scandium (Sc) / R. Rosmamuhamadani... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 62-70. ISSN 1823-5514 ; 2550-164X

Impact of Smart Services to Current Value Networks / Martin Rabe ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 1-11. ISSN 18235514

Mechanical Behaviour and Compatibility Analysis of Thermoplastic Polyurethane/ Polycaprolactone-Based New Fused Deposition Modelling Filament Composite / P. Raveverma ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 116-128. ISSN 18235514

Preparation Technique of SiO2/HFE 7000 Nanorefrigerant / S. Razak ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 132-140. ISSN 18235514

Effects of varying injector opening pressure on the performance of a B20 JOME biodiesel fueled diesel engine / S. Jaichandar...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 17-31. ISSN 1823-5514 ; 2550-164X

Acceptance of Electric Vehicle based on Pricing and Charging Station / H. M. S. Firdaus ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 190-200. ISSN 18235514

Study on the extraction process and optical properties of mangosteen pericarp for Dye Sensitized Solar Cell (DSSC) application / M. A. S. Suri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 251-260. ISSN 18235514

UAV actuator fault detection through artificial intelligent technique / Zulhilmy Sahwee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). ISSN 18235514

Study of Multiple 2:1 and Single 1:1 inlet/outlet ratio for serpentine PEMFC performance / Khairul Imran Sainan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 1-9. ISSN 18235514

Effect of Disc Brake Squeal with Respect to Thickness Variation : Experimental Modal Analysis / R. Samin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 33-44. ISSN 18235514

Additive Manufacturing of Copper-ABS Filament by Fused Deposition Modeling (FDM) / N Sa’ude ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 23-32. ISSN 18235514

Design and Analysis of Centrifugal Pump Impeller for Performance Enhancement / Farah Elida Selamat ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 36-53. ISSN 18235514

Closed Mode Separation of the Symmetrical Structure / Mohamad Azam Shah Aziz Shah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 88-97. ISSN 18235514

Cycle time improvement by lean Six Sigma for the Cutting Tool Production Line / Muhammad Syahmi Shahar and Noor Azlina Mohd Salleh. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 240-264. ISSN 1823-5514 ; 2550-164X

Epoxy-UHMWPE acetabular cup performance based on finite element study / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 117-140. ISSN 18235514

Analysis of an Improved Hybrid Stem Design for Total Hip Replacement (THR) / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 205-2015. ISSN 18235514

Reliability Study of Lead Free Sn-3.8Ag-0.7Cu and Copper (Cu) Substrate based on the Microstructure, Physical and Mechanical Properties / Amares Singh...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 169-180. ISSN 18235514

Design and Simulation of a Rectangular Solar Collector for the Green Tower Development / Zainoor Hailmee Solihin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 106-123. ISSN 18235514

Analysis of Weld Induced Distortion of Butt Joint using Simulation and Experimental Study / Mohd Shahar Sulaiman ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 78-89. ISSN 18235514

Spectroscopic Studies of Oils and Its Synthesized Bio-Polymer / Nurulsaidatulsyida Sulong ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 50-60. ISSN 18235514

Development of prediction system model for mechanical property in friction stir welding using Support Vector Machine (SVM) / Arman Syah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 216-225. ISSN 18235514

Improving regenerative braking strategy using genetic algorithm for electric vehicles / H. Taleghani ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 121-130. ISSN 18235514

Representative Nigerian Anthropometric Data for Automotive Applications / Muhammad Abdulazeez Uba ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 68-88. ISSN 18235514

Design and fabrication of magnetorheological elastomer vibration isolator / Ubaidillah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 192-210. ISSN 18235514

Memorandum of understanding between Universiti Teknologi MARA and Royal Melbourne Institute of technology (RMIT) / Fakulti Kejuruteraan Mekanikal. (2018) UiTM MoU / MoA. (Unpublished)

Mathematical Modelling of Plastic Injection Molding Process Using Central Composite Design (CCD) Sampling and PRSM / Kausalyah V. ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 226-238. ISSN 18235514

Unconventional measurement methods and simulation of aerogel assisted thermoregulation / Mohanapriya Venkataraman ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 62-96. ISSN 18235514

Flight thrust performance of quadcopter / W. Kuntjoro...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 210-221. ISSN 1823-5514 ; 2550-164X

Optimisation Model based Dashboard for Managing Airport Aeronautical Revenues / Wan Mazlina Wan Mohamed and Adibah Shuib. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 124-141. ISSN 18235514

The Effect of Low Temperature Test on Lubrication Performance of Palm Kernel Oil with Addition of PPD as A Lubricant (ASTM D4172) / Aiman. Y and Syahrullail. S. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 142-156. ISSN 18235514

Combustion characteristics, emissions and engine performances of a split injection diesel engine fueled with biodiesel blended fuels / Y.H. Teoh ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 217-229. ISSN 18235514

Virtual manufacturing for prediction of Martensite Formation and Hardness Value induced by Laser Welding Process using Subroutine Algorithm in MSC Marc/Mentat / Omar Yahya...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 107-125. ISSN 1823-5514 ; 2550-164X

Use of a Tendon/Ligament Cell Sheet with Mesenchymal Stem Cells and Cyclic Stretch Stimulus for Tendon / Ligament Tissue Restoration / Yasuyuki Morita...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 1-11. ISSN 18235514

The active strain energy tuning on the parametric resonance of composite plates using finite element method / Zarina Yusof...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 104-119. ISSN 1823-5514 ; 2550-164X

Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514

Quality green energy supply chain management practices in Malaysian / Argustina Zainuddin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 1-12. ISSN 1823-5514 ; 2550-164X

Investigation of the Quality and Mechanical Properties for Spot Welding of Reworked Galvannea and High Strength Steel (HSS) / Mohd Harris Fadhilah Zainudin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 147-155. ISSN 18235514

Lane change behaviour recognition using neural entwork / N. J. Zakaria ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 1-19. ISSN 18235514

Dielectric performance of Hybrid Carbon Nanotube-Alumina Filled Epoxy Nanocomposites / Muhammad Razlan Zakaria...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 180-189. ISSN 18235514

Automatic Feature Recognition of Chamfer and Fillet for Turning Part Model by Volume Decomposition Method / Ahmad Faiz Zubair and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 204-216. ISSN 18235514

Book Section

Factors influencing tourists’ revisit intention to Pangkor Island: the role of travel motivation and destination satisfaction / Musdiana Mohamad Salleh... [et al.]. (2018) In: International Business & Management Academic Colloquium 2018. Faculty of Business & Management, Universiti Teknologi MARA (UiTM) Cawangan Kedah, Merbok, Kedah, p. 13. ISBN 9789670314563

Thesis

The prediction of flux cored arc welding (FCAW) fillet geometry and welding parameters for horizontal position (2F) / Nik Mohd Baihaki Abd Rahman. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Dynamic characterisation and finite element model updating of a car door in white structure / Nor Irwan Abd. Halim. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Friction and wear properties of FRP composites and nanoclay-filled BFRP composites / Anis Adilah Abu Talib. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Development of adaptive controlled natural gas transmission water bath heater using mathematical model / Amiruddin Amkaromi. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Tactile sensing fingers device using quantum tunneling composite (QTC) pills / Nurizzah Lina Azaman. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Modelling of dental geometry configuration / Mohd Shafiq Azni. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Resistance spot weld properties improvement through post weld impact treatment / Farizah Adliza Ghazali. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Fabrication of porous TiNb alloy incorporated with TiH2 powder by powder metallurgy processing route for implant applications / Siti Mariana Hosnie. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Performance study of modified designs of a ranque-hilsch vortex tube using geometry parameters and helical tapes in the hot tube / Nurhasanah Ismail. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Injection molding process optimization to produce porous copper using palm stearin binder / Mohammad Dahar Kamal Bahrin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Hydrogen production enhancement from low-temperature catalytic thermochemical processing of palm oil empty fruit bunches / Khairul Ashraf Kamarudin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Effects of iso-butanol additives in ethanol-gasoline blend (E10) on engine performance and exhaust emissions of a multi-cylinder spark-ignition engine / Muhammad Syarifuddin Mohamed Zaharin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Influence of dental implant designs on stress distribution and micromotion of mandibular bone / Muhammad Saiful Islam Mohd Izra'ai. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

H-minima transform assisted feature characterization system in areal surface metrology / Nor Hidayawati Mohd Zaini. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Biomechanical characterisation of Seni Silat Cekak using a novel 3d motion capture-analysis system / Ghazirah Mustapha. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Effect of Visible Light Transmittance (VLT) and ventilation modes to Vehicle Indoor Air Quality (VIAQ) / Noor Hafiz Noordin. (2018) Masters thesis, thesis, Universiti Teknologi MARA.

Effect of baffle design configuration to the flow performance of a Servco fume cupboard / Mohd Amal Asrol Omar. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Analysis on the effect of the upper wall opening on the natural ventilation performance in building / Aziz Faiz Shahir. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Characterization and model updating of modal parameters of a riveted joints structure / Nor Azela Tormodi. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Development of information architecture and novel simulation system for pillion assessment workstation / Wan Muhammad Syahmi Wan Fauzi. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Entrepreneurship Project

ENT600: Disturbance caused by studio InTunNation studio / Ahmad Hafiz Asyraf Ahmad Halimi, Alif Syazril Shipulizan and Mohd Razin Kanaludin. (2018) [Entrepreneurship Project] (Unpublished)