Items where Division is "Faculty of Mechanical Engineering" and Year is 2018
A
A. Hamid, Ahmad H. and Kasolang,, Salmiah and A. Ghaffar,, Zulkifli and M. Noh, Mohd H. (2018) On the Effect of Central Jet in Solid Cone Pressure-Swirl Atomizers / Ahmad H. A. Hamid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 260-271. ISSN 18235514
A. Ismael, Mhadi and R. Heikal, Morgan and A. Aziz, A. Rashid and El-Adawy, Mohammed (2018) The effect of injection pressure on the droplet size distributions and micro-explosion / Mhadi A. Ismael ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 91-102. ISSN 18235514
A. Rahim, A. A. and Abdullah, S. and K. Singh, S. S. and Nuawi, M. Z. (2018) Relationship between time domain and frequency domain strain signal – Application to real data / A. A. A. Rahim ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 178-191. ISSN Special Issue Advances in Engineering and Technology Vol 6
A.A.M., Redhwan and W.H., Azmi and M.Z., Sharif and N.N.M., Zawawi and R., Mamat (2018) Sonication time effect towards stability of Al2O3/PAG and SiO2/PAG Nanolubricants / A.A.M. Redhwan..[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 14-27. ISSN 1823-5514 ; 2550-164X
A.R.M., Aminullah and W.H., Azmi and A.A.M., Redhwan and M.Z., Sharif and N.N.M., Zawawi and K., Kadirgama and M.N.S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) compressor by using Al2O3/PAG Nanolubricant / A.R.M. Aminullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 49-61. ISSN 1823-5514 ; 2550-164X
Ab Ghani, Ahmad Fuad and Mahmud, Jamaluddin (2018) Hardness, tensile and microstructure assessment of carbon/glass hybrid composite laminate / Ahmad Fuad Ab Ghani and Jamaluddin Mahmud. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 91-105. ISSN 1823-5514 ; 2550-164X
Ab Ghani, SM and Hassan, N S and Tamrin, A A and Lim, T W and Abu Hassan, M I and Ismail, M H (2018) Comparison on polymerization of bulk-fill composite resins in different marginal thickness of tunnel restoration / SM Ab Ghani ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 65-79. ISSN 18235514
Ab Rahman, Mohd Hidayat and Maidin,, Nurul Ain and Ahmad,, Mohd Nazri and Osman,, Mohd Hairizal and Wahid,, Mohammad Khalid and Wahid,, Mohd Fa’iz and Firdaus,, Mohamed Saiful and Mohd Yassim, Halyani and Muhammad Damanhuri, Amir Abdullah and Abd Sukor, Siti Marsyidah (2018) The Comparison Study of Handgrip Pressure on Steering Wheel National Cars / Mohd Hidayat Ab Rahman ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 89-105. ISSN 18235514
Abd Rahim, Erween and Jaafar, Mohd Noor and Mohid, Zazuli and Ibrahim, Mohd Rasidi and Ahmad, Said (2018) A Study on Cryogenic Supercritical Carbon Dioxide Coolant Delivery Technique when Machining of AISI 1045 Steel / Erween Abd Rahim ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 37-49. ISSN 18235514
Abd Rahman, Muhammad Luqman Hakim and Hudha, Khisbullah and Abd Kadir, Zulkiffli and Amer, Noor Hafizah and Murrad, Muhamad (2018) Simulation study on the vehicle speed control in longitudinal direction using a new Continuously Variable Transmission (CVT) System / Muhammad Luqman Hakim Abd Rahman ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 127-146. ISSN 18235514
Abd Rahman, Nik Mohd Baihaki
(2018)
The prediction of flux cored arc welding (FCAW) fillet geometry and welding parameters for horizontal position (2F) / Nik Mohd Baihaki Abd Rahman.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Abd. Halim, Nor Irwan
(2018)
Dynamic characterisation and finite element model updating of a car door in white structure / Nor Irwan Abd. Halim.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Abdul Majid, M. M. and Salleh, M. S. and Abu Hashim, M. A. and Ismail, N. H. and Mansor, S. and Abu Bakar, S. A. (2018) Performance of Semi Active Lateral Control (SALC) algorithm for semi active suspension system in multibody co-simulation method / M. M. Abdul Majid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 45-65. ISSN 18235514
Abdul Razak, Siti Norsyahirah and Abdullah, Jamaluddin and Md Akil, Hazizan (2018) Medical Implant Production using Three-Dimensional Printing as a Potential Manufacturing Process in Medical Application / Siti Norsyahirah Abdul Razak ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 232-246. ISSN 18235514
Abdullah, Bulan and Muhammad Yusof, Khalissah and Saad, Nor Hayati and Mokhtar, Ahmad Syazni (2018) The effects of 0.16 % Chromium + 1.32 % Nickel addition on austempered ductile Iron for mechanical properties and slurry erosion / Bulan Abdullah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 108-120. ISSN Journal of Mechanical Engineering (JMechE)
Abdullah, M.F. and Abdullah, S. and Omar, M.Z. and Sajuri, Z. and Risby, M.S. (2018) Observing the behaviour of reinforced magnesium alloy with carbon-nanotube and lead under 976 m/s projectile impact / M.F. Abdullah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 129-141. ISSN 18235514
Abdullah, Ummi Noor Nazahiah and Othman, Norashiken and I. Romli, Fairuz and Handroos, Heikki (2018) Investigation on user experience goals for joystick interface design / Ummi Noor Nazahiah Abdullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 133-142. ISSN 1823-5514 ; 2550-164X
Abdullah*,, Amirah and Mohamad,, Imran Syakir and Masripan,, Nor Azmmi and Zainal Abidin, Syazwani and Bani Hashim, Ahmad Yusairi (2018) Thermal properties characteristics of MWCNT-OH based Nanofluids in mixture of Ethylene Glycol and Deionized water / Amirah Abdullah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 53-71. ISSN 1823-5514 ; 2550-164X
Abu Bakar, Mimi Azlina and Kasolang, Salmiah and Ahmad, Mohamad Ali and Herman, Dedisaputra (2018) Tribological Effects of Additive Hybrid ZrO2/Al2O3 in Bio-Lubrication / Mimi Azlina Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 35-43. ISSN 18235514
Abu Bakar, S. A. and Abdul Majid, M. M. and Mansor, S. and Abdul Hamid, M.K. and Daud, Z.C. (2018) Performance comparison between skyhook and semi active damping force estimator (SADE) algorithms for semi active suspension system / S. A. Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 143-159. ISSN 18235514
Abu Talib, Anis Adilah
(2018)
Friction and wear properties of FRP composites and nanoclay-filled BFRP composites / Anis Adilah Abu Talib.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Adull Manan, Nor Fazli and Abdul Aziz, Abdul Hakeem and Mahmud, Jamaluddin and Abdullah, Abdul Halim (2018) Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 123-140. ISSN 18235514
Ahmad, S. R. and Arifin, A. and Abdullah, S. and M. Yunoh, M. F. (2018) Characterisation of Stress Intensity Factor with Magnetic Flux Signal Leakage in Stable Fatigue Crack Growth Region S. R. Ahmad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 141-155. ISSN 18235514
Ahmad, Y. and A. Kassim, K. A. and M. Isa, M.H. and Mustaffa, S. (2018) A comparison between ISOFIX and seatbelt installation methods for child restraint system on child occupant performance / Y. Ahmad ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 131-141. ISSN 18235514
Ahmad Azali, Nurul Atma Athirah and Che Zakaria, Noor Ayuni and Mohd Mustafah, Nadia and Othman, Nurul Atiqah and Abdul Latip, Eli Nadia and Azaman, Aizreena (2018) Electromyography analysis for assessment of lower extremity muscles during squat and stoop movement / Nurul Atma Athirah Ahmad Azali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 80-94. ISSN 18235514
Ahmad Basri, Ahmad Burhani and Abdul Rani, Muhamad Norhisham and Yunus, Mohd Azmi and Wan Iskandar Mirza, Wan Imaan Izhan and Abu Samah, Siti Akmar (2018) Wave-Based Substructuring Method for Dynamic Behaviour Investigation of Solid Meshing Based Finite Element Model of a Structure / Ahmad Burhani Ahmad Basri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 176-186. ISSN Special Issue Advances in Engineering and Technology Vol 5 (Submitted)
Ahmad Halimi, Ahmad Hafiz Asyraf and Shipulizan, Alif Syazril and Kanaludin, Mohd Razin
(2018)
ENT600: Disturbance caused by studio InTunNation studio / Ahmad Hafiz Asyraf Ahmad Halimi, Alif Syazril Shipulizan and Mohd Razin Kanaludin.
(2018)
[Entrepreneurship Project]
(Unpublished)
Ahmad Rasyid, Mohd Fadli and Salim, Muhamad Saifuddin and Zakaria, Muhammad Razlan and Mad Akil, Hazizan and Mohd Ishak, Zainal Arifin and Ahmad Thirmizir, Mohd Zharif (2018) Effect of sodium silicate on the dimensional stability and mechanical behaviour of non-woven flax reinforced acrylic based polyester composites / Mohd Fadli Ahmad Rasyid... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 233-245. ISSN 18235514
Ahmadipourroudposht, Mohaddeseh and Mohd Yusof, Noordin and Kuan, Yew Wong (2018) QFD-Operational research as an integrated method for developing product design process in one-of-a-kind production / Mohaddeseh Ahmadipourroudposht... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 153-173. ISSN 18235514
Ahmed, M.W. and Abidin, Z.Z. and Mustafah, Y.M. and Mourshid, S.K. and Abdelhalim, M.A. and Rahman, H.A and Sulaiman, S.N. (2018) Design and development of image based lane warning and anti-collision detection system / M.W. Ahmed ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 95-105. ISSN 18235514
Aizat Zainal, M. N. and Anuar, M. Azhan and Mat Isa, A.A and Adenan, M. Shahriman (2018) Experimental analysis of racing car chassis for Modal Identification / M. N. Aizat Zainal ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 203-216. ISSN 18235514 (Submitted)
Akhbar, Suffiyana and Subuki, Istikamah and Sharudin, Rahida Wati and Ismail, Muhammad Hussain (2018) Performance of Polycaprolactone/Hydroxyapatite (PCL/HA) Composite Blended by Ultrasound Assisted Melt Blending / Suffiyana Akhbar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 235-250. ISSN 18235514
Ali, Nur Syuhada and Mohd Yusof, Khairiyah and Othman, Mohd Fauzi and Abdul Latip, Razam and Nidzam Ismail, Muhammad Saiful (2018) Adaptive Neuro Fuzzy Inference System (ANFIS) modelling for quality estimation in palm oil refining process / Nur Syuhada Ali ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 36-47. ISSN 18235514
Amkaromi, Amiruddin
(2018)
Development of adaptive controlled natural gas transmission water bath heater using mathematical model / Amiruddin Amkaromi.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Andud, Dahia and Nordin, Norridzwan and Mat, Muhd Faiz and Saidin, Salina (2018) Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+M) using manual GMAW followed by HFMI/PIT / Dahia Andud... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 205-222. ISSN 18235514
Andwari, Amin Mahmoudzadeh and Muhamad Said, Mohd Farid and Abdul Aziz, Azhar and Esfahanian, Vahid and Zadeh, Ali Salavati and Idris, Mohamad Asmawi and Mohd Perang, Mohd Rozi and Mohd Jamil, Hishammudin (2018) Design, Modeling and Simulation of a High-Pressure Gasoline Direct Injection (GDI) Pump for Small Engine Applications / Amin Mahmoudzadeh Andwari ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 107-120. ISSN 18235514
Anuar, M. Azhan and Mat Isa, A.A. and A.R., Zamri (2018) Critical experimental issues of cracked aluminum beam in operational modal analysis / M. Azhan Anuar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 211-225. ISSN 18235514
Azam1,, Qummare and Ismail1*, Mohd Azmi and Mazlan2, Nurul Musfirah (2018) Experimental study of Bias Acoustic Liner on nacelle lip-skin/ Qummare Azam ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 67-77. ISSN 18235514
Azaman, Nurizzah Lina
(2018)
Tactile sensing fingers device using quantum tunneling composite (QTC) pills / Nurizzah Lina Azaman.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Aziz, Mohd Rozaiman and Kuntjoro, Wahyu and Natarajan, Valliyappan David (2018) Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 12-24. ISSN 18235514
Azni, Mohd Shafiq
(2018)
Modelling of dental geometry configuration / Mohd Shafiq Azni.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
B
B., Setiyana and R., Ismail and J., Jamari and D.J., Schipper (2018) A numerical investigation of mechanical response of unfilled styrene butadiene rubber by static straight blade indentation / B. Setiyana...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 1 (1). pp. 43-51. ISSN 1823-5514 ; 2550-164X
Badrishah, NS and Sa’ude, N and Ibrahim, M and Wahab,, MS and Haq, R and Marwah, OMF and Khirotdin, RK (2018) Parameter characteristic of desktop laser engraving kit machine: A review / NS Badrishah, N Sa’ude ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 56-68. ISSN 18235514
Badroush, N. and Che Haron, C. H. and A. Ghani, J. and Azhar, M. F. and Abdul Halim, Nurul Hayati (2018) Performance of Coated Carbide Tools when Turning Inconel Alloy 718 under Cryogenic Condition using RSM / N. Badroush ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 73-87. ISSN 18235514
Badroush, N. and Che Haron, C.H. and Ghani, J. A. and Azhar, M.F. and Abdul Halim, Nurul Hayati (2018) Overview and Case Study of Cryogenic Cooling in Machining of Nickel Based Alloy / N. Badroush ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 187-204. ISSN 18235514
Bahari, Mohd Saiful and Jaffarullah, M. Shamil and Mohamed, Zulkifli and ., Armansyah (2018) Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 174-188. ISSN 18235514
Boonsong, Wasana and Ismail, Widad and Adeleke, Oluseye (2018) Proposed low power consumption of power monitoring and management system embedded RFID with WSN and IoT Technologies / Wasana Boonsong... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 120-132. ISSN 1823-5514 ; 2550-164X
Budin, Salina and Koay, Mei Hyie and Selamat, Mohd Asri (2018) The Effect of Adding Carbon and Vanadium Carbide on Microstructure and Mechanical Properties of Ultra-Fine WC-Co Composite / Salina Budin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 25-36. ISSN 18235514
C
Chandra, Hendri and Luthfi, Muhamad Indra and Lamin, Fauziana and Ariffin, Ahmad Kamal (2018) Evaluation of Torsional Vibration on Vertical-type Centrifugal Pump Shaft / Hendri Chandra ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 167-175. ISSN 18235514
Chee, Nian Tan and Chee, Fai Tan and Azman, M. (2018) A Fault Diagnosis Expert System for Building Cooling Tower / Chee Nian Tan..[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 233-247. ISSN 18235514
Chok, E.Y.L. and Majid, D.L.A.A. (2018) Low cycle fatigue of hybrid woven Kenaf Fiber reinforced epoxy composite with 1% addition of Silica Aerogel / Chok., E.Y.L. and Majid., D.L.A.A. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 73-89. ISSN 1823-5514 ; 2550-164X
Chung, She Man and Weily, Khoo and Lim, Shing Chee and Zakaria, Mohd Faiz and Koh, Ching Theng (2018) Strategy on the production of bead-free electrospun gelatin scaffolds / Chung She Man ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 696-79. ISSN 18235514
E
EL-Adawy, Mohammed and Heikal, M.R. and A. Aziz, A. Rashid and Siddiqui, M. I and Abdul Wahhab, Hasanain A. and Hasanain A., Hasanain A. (2018) Tumble Motion Evolution for GDI Engine using Particle Image Velocimetry (PIV) / Mohammed EL-Adawy ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 191-201. ISSN 18235514
Ei, Yamamoto and Yuki, Kawamura (2018) Changes in the structure and mechanical properties of bone tissues obtained from experimental animal models of lifestyle-related diseases / Ei Yamamoto and Yuki Kawamura. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 226-234. ISSN 18235514
F
Fathurrohim,, Luqman and Ridanto, Eko Poetro and Fariz, Ahmad (2018) Design optimization for mass sizing of LEO communication satellites / Luqman Fathurrohim...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 47-58. ISSN 1823-5514 ; 2550-164X
Fitri, Muhamad and Mahzan, Shahruddin (2018) Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite / Muhamad Fitri and Shahruddin Mahzan. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 223-232. ISSN 18235514
Fletcher, J. B. and Ithnin, A. M. and Yahya, W. J. and Kadir, H. A. and Ramlan, A. (2018) Evaluation of water-in-diesel emulsion fuel blended with metal additives in a diesel engine / J. B. Fletcher ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 21-31. ISSN 18235514
Frédéric, Etienne Kracht and Alex Armando, Roempler Dellien and Dieter, Schramm (2018) Validation of a suspension model and its elastic behaviour demonstrated at the formula student race car of the University Duisburg-Essen / Frédéric Etienne Kracht ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 35-57. ISSN 18235514
G
Ghazali, Farizah Adliza
(2018)
Resistance spot weld properties improvement through post weld impact treatment / Farizah Adliza Ghazali.
(2018)
PhD thesis, thesis, Universiti Teknologi MARA.
Ghazali, Farizah Adliza and Salleh, Zuraidah and HP Manurung, Yupiter and Md Taib, Yakub (2018) Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 239-247. ISSN Journal of Mechanical Engineering (JMechE)
Graf, Marcel and Härtel, Sebastian and Binotsch, Carolin and Awiszus, Birgit (2018) Virtual Manufacturing as Tool for Material and Process Developments and Optimizations / Marcel Graf ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 33-59. ISSN 18235514
H
Habib, Khairul and Kamaruzzaman, Nurul Afiqah (2018) Performance study of adsorption cooling system driven by waste heat from automobile engine / Khairul Habib and Nurul Afiqah Kamaruzzaman. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 79-89. ISSN 18235514
Haddad, Razieh Khaksari and Reda, Eslam and Rasani, Mohammad Rasi and Malok Zedan, Cristian and Harun, Zambri (2018) Fire simulation of a scaled Mass Rapid Transit (MRT) tunnel / Razieh Khaksari Haddad ... (et al.). (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 1-17. ISSN 18235514
Hafsa, MN and Kassim, N and Ismail, S and Kamaruddin, SA and Hafeez, TM (2018) Study on surface roughness quality of FDM and MJM additive manufacturing model for implementation as investment casting sacrificial pattern / MN Hafsa ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 25-34. ISSN 18235514
Harun*,, M. Hafiz and Azhari,, Muhamad Azwar and Yunos, R. and Mat Yamin, A. K. and Sariman, M. Z. (2018) Characterization of a Magnetorheological Fluid Damper Applied to Semi-Active Engine Mounting System / M. Hafiz Harun...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 248-259. ISSN 18235514
Hasmuni, Noreriyanti and Ibrahim, Mustaffa and Raus, Azli Amin and Wahab, Md Saidin and Kamarudin, Khairu (2018) Porosity effects of AlSi 10mg parts produced by selective laser melting / Noreriyanti Hasmuni ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 246-255. ISSN 18235514
Hassan, M H and Abdullah, J and Mahmud, A S and Supran, A (2018) Effect of drill geometry and drilling parameters on the formation of adhesion layer in drilling composite-metal stack- up material / M H Hassan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 90-98. ISSN 18235514
Hassan, Zulkafli and H., Shaharuddin and I., Wan Asma and M.R., Siti Nur Ridhwah (2018) Production and applications of biodiesel from high acid value feedstocks / Zulkafli Hassan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 10-15. ISSN 18235514
Hidzir Pauzi, Nabill and Abdullah, Shahrul Azam (2018) Currency identification assistant for visually impaired / Nabill Hidzir Pauzi and Shahrul Azam Abdullah. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 156-164. ISSN 1823-5514 ; 2550-164X
Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Takahashi, Yoshiyuki (2018) Development of a quantitative evaluation method in occupational therapy exercise for upper limb motor function rehabilitation / Hokyoo Lee ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 258-274. ISSN 18235514
Hokyoo, Lee and Ab Patar, Mohd Nor Azmi and Takashi, Komeda and Mahmud, Jamaluddin and Yoshiyuki, Takahashi (2018) Evaluation of four-wheel vehicle driven by lower limb with electric pedalling assistance for elderly people / Hokyoo Lee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 29-43. ISSN 18235514
Hosnie, Siti Mariana
(2018)
Fabrication of porous TiNb alloy incorporated with TiH2 powder by powder metallurgy processing route for implant applications / Siti Mariana Hosnie.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Hussin, Norasikin and Ibrahim, Dzullijah and Mohd Yahya, N. H. and Zulkkhiflee, Nor Izlan (2018) Design of Jig for Coordinate Measuring Machine / Norasikin Hussin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 97-107. ISSN 18235514
I
Idris, Roslinda and Abdullah, Shahrum and Prakash, Thamburaja and Omar, Mohd. Zaidi (2018) An experimental investigation of tensile properties and fatigue crack growth behaviour for Dual-Phase Steel / Roslinda Idris...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 155-167. ISSN 1823-5514 ; 2550-164X
Ismail, Asmawi and Hussain, Patthi and Mustapha, Mazli and Nuruddin, Muhd Fadhil (2018) Fe-Al Diffusion Bonding: Effect of reaction time on the interlayer thickness / Asmawi Ismail...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 80-91. ISSN 1823-5514 ; 2550-164X
Ismail, Nurhasanah
(2018)
Performance study of modified designs of a ranque-hilsch vortex tube using geometry parameters and helical tapes in the hot tube / Nurhasanah Ismail.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
J
Jalaluddin,, Rustan Tarakka and Akio, Miyara (2018) Performance of shallow borehole of spiral-tube ground heat exchanger / Jalaluddin, Rustan Tarakka and Akio Miyara. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 41-52. ISSN 1823-5514 ; 2550-164X
Jambari, Sharoul and Yahya, Mohd Yazid and Abdullah, Mohamed Ruslan (2018) Characterization of Hybrıd Yarn / Fabrıcs From of Kenaf-Kevlar Fibers / Sharoul Jambari ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 256-267. ISSN 18235514
Jamil, Abdullah and Baharom, M. B. and Lemma, T. A. (2018) Mathematical modelling and design of counterweights for unbalanced links / Abdullah Jamil ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 157-166. ISSN 18235514
Jandová, Soňa (2018) Foot strike pattern in sport shoes with different construction / Soňa Jandová...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 29-39. ISSN 1823-5514 ; 2550-164X
Jayson, Desmond and Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Mohamad, Taib Iskandar and Ilham, Zul (2018) Performance analysis of a direct injection diesel engine using Biodiesel and additives / Desmond Jayson ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 67-80. ISSN 18235514
Jit, Shen Quah and Md Ghazaly, Mariam (2018) Development and analysis of face recognition system on a mobile robot environment / Jit Shen Quah and Mariam Md Ghazaly. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 169-189. ISSN 1823-5514 ; 2550-164X
K
K. Yasari, N. M. L. P. and Muhayat, Nurul and Triyono, Triyono and Saputro, Y. C. N. (2018) Microstructural and Mechanical Properties of Underwater Wet Welded SS400 Steel / N. M. L. P. K. Yasari ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 168-179. ISSN 18235514
K.Singh, S.S. and Abdullah, S. (2018) Effects of mean stress on the durability assessment for an automobile crankshaft using Markov Chain Modelling Technique / S.S. K.Singh and S. Abdullah. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 19-28. ISSN 18235514
Kamal Bahrin, Mohammad Dahar
(2018)
Injection molding process optimization to produce porous copper using palm stearin binder / Mohammad Dahar Kamal Bahrin.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Kamarudin, Khairul Ashraf (2018) Hydrogen production enhancement from low-temperature catalytic thermochemical processing of palm oil empty fruit bunches / Khairul Ashraf Kamarudin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Kamarul Baharin, Zainal Abidin and Mohammad, Muhammad Hafiz (2018) Experimental investigations on the performance of a single slope solar still coupled with flat plate solar collector under Malaysian conditions / Zainal Abidin Kamarul Baharin and Muhammad Hafiz Mohammad. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 16-24. ISSN 18235514
Kaname, Miura and Hidenori, Matsubara and Shigeo M., Tanaka (2018) Development of Optical Bone Densitometry Using Near-infrared Light / Kaname Miura ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 60-67. ISSN 18235514
Kataraki, Pramod S and Abu Mansor, Mohd Salman (2018) Identification of Freeform Depression Feature in a Part Using Vertex Attributes From Feature Volume / Pramod S Kataraki and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 217-231. ISSN 18235514
Koay, Mei Hyie and Salleh, Zuraidah and Mardziah, C.M. and Mohd Masdek, Nik Rozlin Nik and Resali, Nor Azrina (2018) Corrosion Behavior of Heat Treated Nanocrystalline Co Ni Fe Coating on Stainless Steel / Koay Mei Hyie...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 191-203. ISSN 18235514
Kuzaiman, Nur Asiah and Zainuddin, Argustina and Mohd Salleh, Noor Azlina and Kasolang, Salmiah and Abd Rashid, Amirul (2018) Green Lean TQM Islamic Process Management Practices In Malaysian Food Companies / Nur Asiah Kuzaiman...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 12-22. ISSN 18235514
L
Lohgheswary, N. and Abdul Halim, M. H. and M. Nopiah, Z. and A. Aziz, A. and Zakaria, E. (2018) Developing New Lab Base Teaching Approach for Linear Algebra subject in Engineering Mathematics Courses / N. Lohgheswary ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 220-232. ISSN 18235514
M
M. Dasuki, Norhafizah and I. Romli, Fairuz (2018) Quality Function Deployment for New Standing Cabin Concept of Commercial Transport Aircraft / Norhafizah M. Dasuki and Fairuz I. Romli. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 247-257. ISSN 18235514
M. Rasidi, N. M. and Abdullah, S. and Wahab, D.A. and Ramli, R. and M. Yassin, R. (2018) Assessing Technique Applicability towards Ideation Taxonomy for Engineering Design Concept / N. M. M. Rasidi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 201-219. ISSN 18235514
M. Yunoh, M. F. and Abdullah, S. and M. Saad, M. H. and M. Nopiah, Z. and Nuawi, M. Z. and Ariffin, A. (2018) Classification of Fatigue Damaging Segments Using Artificial Neural Network / M. F. M. Yunoh ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 61-72. ISSN 18235514
M. Yusoff, Nazrul and Johari, Yanti and Ab Rahman, Ismail and Mohamad, Dasmawati and Khamis, Mohd Fadhli and Husein, Adam and Ariffin, Zaihan (2018) Hardness of Flowable Resin Composite from Rice Husk / Nazrul M. Yusoff ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 181-190. ISSN 18235514
MVS Murali, Krishna, and Kumar, S Narasimha and Kolli, Vamsi Krishna and Sreeram, Barathula (2018) Experimental Investigation on SI Engine Emissions via EGR and catalytic converter with air injection mechanism / MVS Murali Krishna...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 33-46. ISSN 1823-5514 ; 2550-164X
Mahmud, M. and K. Singh, S. S. and Abdullah, S. and Ariffin, A. K. and Nopiah, Z. M. (2018) Determining Damaging Fatigue Cycles under Influence of Random Loadings using the Root-Mean-Square Level / M. Mahmud ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 156-167. ISSN 18235514
Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Firdaus, Mohamed Saiful and Mohd Yassim, Halyani and Afiq Razali, Muhammad Zayani (2018) A prototype development of anti-hunchback device / Nurul Ain Maidin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 192-209. ISSN 1823-5514 ; 2550-164X
Mamauod, Siti Nur Liyana and Romli1,2, Ahmad Zafir and Mustafa Bakri2, Haizum Faiqah (2018) Tensile Properties of Nanoclay (NC)-Acrylonitrile Terminated Polybutadiene (ATBN) Modified Epoxy Composites / Siti Nur Liyana Mamauod ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 44-52. ISSN 18235514
Manosroi, W. (2018) Effects of Temperature Changes, Air Velocities and Volume Fractions on the Single Droplet Evaporation Behaviors at High Ambient Temperatures / W. Manosroi. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 1-19. ISSN 18235514
Maso’od, Mashitah and Ismail, Muhammad Hussain and Razali, Rosliza and Subuki, Istiqamah (2018) Effect of sintering temperatures on microstructural changes and phase transformation of nearly equiatomic microporous NiTi Alloy produced by metal injection moulding / Mashitah Maso’od ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 115-126. ISSN 18235514
Mat Ali, Mohamed Sukri and Shaharuddin, Nur Haziqah and Jalasabri, Jafirdaus and Mohd Sood, Anwar and Mansor, Shuhaimi (2018) Validation study on external wind noise prediction using OpenFOAM / Mohamed Sukri Mat Ali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 111-126. ISSN 18235514
Mat Hassan, Nik Normunira and Shamsudin, Zainon Sharmila and Mohd Rus, Anika Zafiah and Sulong, Nurulsaidatulsyida (2018) Investigation of Renewable Polymer Composite from Waste Oil Endurance to UV Irradiation Exposure by using FTIR and UV-Vis / Nik Normunira Mat Hassan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 53-61. ISSN 18235514
Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Nik Rosli (2018) Simulation of injection development of diesel-ethanol-palm oil methyl ester blend in direct injection diesel engine / Norhidayah Mat Taib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 81-93. ISSN 18235514
Mazlan, Siti Nur Humaira and Alkahari, Mohd Rizal and Ramli, Faiz Redza and Sudin, Mohd Nizam (2018) Structure Fabricated using Entry Level 3D Printer / Siti Nur Humaira Mazlan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 98-122. ISSN 18235514
Md Darom, Noraida Azura and Hishamuddin, Hawa and Ramli, Rizauddin and Mat Nopiah, Zulkifli and A Sarker, Ruhul (2018) An integrated vendor-buyer model subject to supply disruption with transportation cost / Noraida Azura Md Darom ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 241-258. ISSN 18235514
Md Saad, Mohamad Hanif and Sarnon, Mohd Zaki and Hussain, Aini and Rosli, Mohd Rezdwan (2018) The development of low-cost Cloud-Based CO2 Monitoring System for green city application / Mohamad Hanif Md Saad ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 259-268. ISSN 18235514
Mohamad, Muhammad Nabil Fikri and Wan Hamzah, Wan Azmi and Abdu Hamid, Khamisah and Mamat, Rizalman (2018) Heat transfer performance of Tio2–SiO2 Nanofluid in water-ethylene glycol mixture / Muhammad Nabil Fikri Mohamad...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 39-48. ISSN 1823-5514 ; 2550-164X
Mohamad, Shahidan and Abd Halim, Suhaila (2018) Image enhancement process on digital radiographic image with weld discontinuities / Shahidan Mohamad and Suhaila Abd Halim. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 275-292. ISSN 18235514
Mohamad Nasir, Nadia Nurnajihah and Abdullah, Shahrum and Karam Singh, Salvinder Singh and Yunoh, Mohd Faridz (2018) Time-frequency strain data analysis of suspension using the Hilbert-Huang transform / Nadia Nurnajihah Mohamad Nasir ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 59-77. ISSN 18235514
Mohamad Nor, Nor Hafiez and Nor Hafiez, Hazran and Yahaya, Mohd Azman (2018) Optimizing sintering process to produce highest density of porous Ti-6Al-4V / Nor Hafiez Mohamad Nor ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 44-55. ISSN 18235514
Mohamad Salleh, Musdiana and Ali, Siti Meriam and Harun, Etty Harniza and Ahmad Mabrul, Nurul Aqidah (2018) Factors influencing tourists’ revisit intention to Pangkor Island: the role of travel motivation and destination satisfaction / Musdiana Mohamad Salleh... [et al.]. (2018) In: International Business & Management Academic Colloquium 2018. Faculty of Business & Management, Universiti Teknologi MARA (UiTM) Cawangan Kedah, Merbok, Kedah, p. 13. ISBN 9789670314563
Mohamed, Mohamad Faruqi
(2018)
Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohamed, Nor Shamsiah and Koh, Ching Theng (2018) Preparation of Siam Weed extracts / Nor Shamsiah Mohamed and Koh Ching Theng. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 268-274. ISSN 18235514
Mohamed Zaharin, Muhammad Syarifuddin
(2018)
Effects of iso-butanol additives in ethanol-gasoline blend (E10) on engine performance and exhaust emissions of a multi-cylinder spark-ignition engine / Muhammad Syarifuddin Mohamed Zaharin.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohamed Zaharin, Muhammad Syarifuddin and Abdullah, Nik Rosli and Badrulhisam, Najmi Haziq and Hamzah, Fazlena and Majeed Ali, Obed (2018) Estimation method of heating value properties on variations of alcohol-gasoline blends and volume percentages / Muhammad Syarifuddin Mohamed Zaharin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 20-35. ISSN 18235514
Mohammad, Ahmad Faiz and Zaki, Sheikh Ahmad and Mat Ali, Mohamed Sukri and Yakub, Fitri (2018) Numerical investigation of wind-induced interference in a random urban array / Ahmad Faiz Mohammad ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 189-204. ISSN 18235514
Mohammad, Mazian and Abdullah, Shahrum and Jamaludin, Nordin and Innayatullah, Othman (2018) Fatigue Life Assessment of SAE 1045 Carbon Steel under Strain Events using the Weibull Distribution / Mazian Mohammad...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 165-180. ISSN 1823-5514 ; 2550-164X
Mohd Arif, Mohd Anif and Omar, Mohd Zaidi and Sajuri, Zainuddin and Mohamed, Intan Fadhlina and Samat, Saziana (2018) The effects of cooling slope on the semi-solid microstructures of Al4.8Si2.8Cu0.5Mg aluminium alloy / Mohd Anif Mohd Arif ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 231-239. ISSN 18235514
Mohd Izra'ai, Muhammad Saiful Islam
(2018)
Influence of dental implant designs on stress distribution and micromotion of mandibular bone / Muhammad Saiful Islam Mohd Izra'ai.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohd Nawi, Al Alif Elmi and Chua Abdullah, Muhammad Ilman Hakimi and Abdollah, Mohd Fadzli (2018) Dispersion stability of hBN Nanoparticle in liquid phase with different dispersion agents / Al Alif Elmi Mohd Nawi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 143-153. ISSN 1823-5514 ; 2550-164X
Mohd Noh, Mohd Hafiz and Abdul Hamid, Ahmad Hussein and Koichi, Mori (2018) The length scale effect between wall and closes field point on a single turbine blade simulation / Mohd Hafiz Mohd Noh ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 155-166. ISSN 18235514
Mohd Ramli, Mohd Hanif and Mat Dzahir, Mohd Azuwan (2018) A new phenomenological-based rate-dependent hysteresis operator for hysteresis characterization / Mohd Hanif Mohd Ramli and Mohd Azuwan Mat Dzahir. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 142-153. ISSN 18235514
Mohd Razalli, Ammer Ezhar and Abd. Wahab, Dzuraidah and Mohd Ihsan, Ahmad Kamal Ariffin (2018) Durability Studies of Remanufacturable Components for Extended Life Cycle / Ammer Ezhar Mohd Razalli ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 177-189. ISSN 18235514
Mohd Saiah, Helmey Ramdhaney and Mohd Rafie, Azmin Shakrine and I. Romli, Fairuz (2018) Freestream Velocity Correction in Narrow Channels / Helmey Ramdhaney Mohd Saiah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 54-66. ISSN 18235514
Mohd Suhaimi, Muhammad Farhan and Mohd Salleh, Noor Azlina (2018) A case study on the improvement of productivity and efficiency of a quality control line for a cutting tool manufacturer / Muhammad Farhan Mohd Suhaimi and Noor Azlina Mohd Salleh. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 222-239. ISSN 1823-5514 ; 2550-164X
Mohd Zaini, Nor Hidayawati
(2018)
H-minima transform assisted feature characterization system in areal surface metrology / Nor Hidayawati Mohd Zaini.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohd Zin, Mohd Syazwan
(2018)
Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Mohd Zulkifli, Muhammad Nasrun Faris and Yahya, Mohamad Faizul (2018) 3D angle interlock woven fabric mechanical tensile strength based on various fabric weft densities / Muhammad Nasrun Faris Mohd Zulkifli and Mohamad Faizul Yahya. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 92-103. ISSN 1823-5514 ; 2550-164X
Muda, Rizamarhaiza and Sulaiman, Syazwan Liyana and Ahmad, Sufizar and Mohd Taib, Hariati (2018) Polyvinyl Alcohol/Chitosan/Silicon Dioxide (PVA/CS/Sio2) Beads For Removal Of Chromium (VI) Ions / Rizamarhaiza Muda...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15. pp. 71-79. ISSN 1823-5514 ; 2550-164X
Muhammad Yusof, Khalissah and Abdullah, Bulan and Saad, Nor Hayati and Izzatina, Nasfati (2018) The effect of slurry erosion wear on boronized alloyed ductile iron (0.019 % Niobium and 0.145 % Vanadium) / Khalissah Muhammad Yusof ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 121-130. ISSN 18235514
Muhayat, Nurul and Triyono, Rizky Danu Rahmanto and Zubaydi, Achmad (2018) Effect of Tool Plunge Depth and Pin Profile on Mechanical Properties of Friction Stir Spot Welded AA5052 Joints / Nurul Muhayat...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 181-191. ISSN 1823-5514 ; 2550-164X
Muniandy, Komethi and Mohamad Ariff, Zulkifli and Abu Bakar, Azhar (2018) Online strain measurement during blown film extrusion using digital image correlation / Komethi Muniandy ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 154-165. ISSN 18235514
Mustapha, Ghazirah (2018) Biomechanical characterisation of Seni Silat Cekak using a novel 3d motion capture-analysis system / Ghazirah Mustapha. (2018) PhD thesis, thesis, Universiti Teknologi MARA.
N
N. V., David and Azlan, Mohd (2018) Moisture Absorption Properties and Shock Cushioning Characteristics of Bio-Based Polyurethane Foam Composites / David, N.V and Mohd Azlan. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 157-168. ISSN 18235514
N.N.M., Zawawi and W.H., Azmi and A.A.M., Redhwan and M.Z., Sharif (2018) Thermo-physical properties of metal oxides composite Nanolubricants / N.N.M. Zawawi...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 28-38. ISSN 1823-5514 ; 2550-164X
Nawi, M.R.M. and Azhar, M.S.A. (2018) Aerodynamics Performance of Barn Swallow Bird at Top Speed : A Simulation Study / M.R.M. Nawi and M.S.A. Azhar. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 1-15. ISSN Journal of Mechanical Engineering (JMechE)
Ngatiman, Nor Azazi and Nuawi, Mohd Zaki (2018) Hybrid vehicle engine misfire detection using Piezo-film Sensors and analysing with Z-freq / Nor Azazi Ngatiman and Mohd Zaki Nuawi. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 269-285. ISSN 18235514
Nicholas, Hilary Nicholas and Magaswaran, Kumaresan and Jayapal, Vikneswary (2018) Fuel consumption reduction by increasing thermal efficiency through heating of fuel / Edmund Hilary Nicholas ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 103-110. ISSN 18235514
Noordin, Noor Hafiz
(2018)
Effect of Visible Light Transmittance (VLT) and ventilation modes to Vehicle Indoor Air Quality (VIAQ) / Noor Hafiz Noordin.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA.
Noordin, Noor Hafiz and Abd Razak, Azli and Kushairi, Sahril and Mohamad, Mohd Faizal (2018) Preliminary analysis of benzene, toluene, ethylbenzene, O-Xylene (BTEX) and formaldehyde inside vehicle cabin / Noor Hafiz Noordin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 80-99. ISSN 18235514
O
Omar, Mohd Amal Asrol
(2018)
Effect of baffle design configuration to the flow performance of a Servco fume cupboard / Mohd Amal Asrol Omar.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Othman, Nurul Atiqah and Che Zakaria, Noor Ayuni and Mohd Ramli, Mohd Hanif (2018) PLC system to optimize training device of upper limb spasticity / Nurul Atiqah Othman...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 127-141. ISSN 1823-5514 ; 2550-164X
P
P Prajadhiana, Keval. and Manurung, Yupiter HP and Zainir, Muhammad Zohdi and Yahya, Omar and Saedon, Juri and Shahriman, Mohd and Omar, Abdul Rahman and Kuntjoro, Wahyu and Kasim, Khairulnizam and Ishak, Dendi P. and Bauer, Alexander and Graf, Marcel (2018) Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 99-115. ISSN 18235514
Petr, Lenfeld and Luboš, Běhálek and Martin, Borůvka (2018) Application of cryogenic grinding for filler preparation in the form of Coconut Nanocomposites into the Thermoplastic Matrix with the evaluation of properties while using different types of MAgPP Coupling agents / Petr Lenfeld...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 13-27. ISSN 1823-5514 ; 2550-164X
Prathabrao, M and Ibrahim, M H I and M Amin, Sri Yulis and Othman, M H (2018) Parameter optimization of metal injection moulding : A review / M Prathabrao ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 100-114. ISSN 18235514
R
R., Rosmamuhamadani and R.E, Ibrahim and M.K., Talari and M., Yahaya, Sabrina and S., Sulaiman and M.I.S., Ismail (2018) Characterization of Aluminium-Silicon (Al-Si) cast alloy refined with Titanium Diboride (TiB2) and Scandium (Sc) / R. Rosmamuhamadani... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 62-70. ISSN 1823-5514 ; 2550-164X
Rabe, Martin and Kühn, Arno and Dumitrescu, Roman and Mittag, Tobias and Schneider, Marcel and Gausemeier, Jürgen (2018) Impact of Smart Services to Current Value Networks / Martin Rabe ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 1-11. ISSN 18235514
Raveverma, P. and Ibrahim, M. and Sa’ude, N. and Yarwindran, M. (2018) Mechanical Behaviour and Compatibility Analysis of Thermoplastic Polyurethane/ Polycaprolactone-Based New Fused Deposition Modelling Filament Composite / P. Raveverma ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 116-128. ISSN 18235514
Razak, S. and Nawi, M.R.M. and Rehim, M.Z.A. and Azmi, W.H. (2018) Preparation Technique of SiO2/HFE 7000 Nanorefrigerant / S. Razak ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 132-140. ISSN 18235514
S
S., Jaichandar and D., Samuelraj and Kumar, M. Sathish (2018) Effects of varying injector opening pressure on the performance of a B20 JOME biodiesel fueled diesel engine / S. Jaichandar...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 16 (1). pp. 17-31. ISSN 1823-5514 ; 2550-164X
S. Firdaus, H. M. and Halyani, M. Y. and Osman, M. H. and Maidin, N.A. and Ahmad, M. N. and A. Rahman, M. H. and Damanhuri, A. A. and Wahid, M. K. (2018) Acceptance of Electric Vehicle based on Pricing and Charging Station / H. M. S. Firdaus ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 190-200. ISSN 18235514
S. Suri, M. A. and Yahaya, N. A. and Hamzah, K. (2018) Study on the extraction process and optical properties of mangosteen pericarp for Dye Sensitized Solar Cell (DSSC) application / M. A. S. Suri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 251-260. ISSN 18235514
Sahwee, Zulhilmy and Mahmood, Aina Suriani and Abd. Rahman, Nazaruddin and Mohamed Sahari, Khairul Salleh (2018) UAV actuator fault detection through artificial intelligent technique / Zulhilmy Sahwee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). ISSN 18235514
Sainan, Khairul Imran and Tijani, Alhassan Salami and Zakaria, Irnie Azlin and Wan Mohamed, Wan Ahmad Najmi (2018) Study of Multiple 2:1 and Single 1:1 inlet/outlet ratio for serpentine PEMFC performance / Khairul Imran Sainan ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 1-9. ISSN 18235514
Samin, R. and Hao, N.C. and As’arry, A. and M. Rezali, K.A. and Nuawi, M.Z. (2018) Effect of Disc Brake Squeal with Respect to Thickness Variation : Experimental Modal Analysis / R. Samin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 33-44. ISSN 18235514
Sa’ude, N and Ibrahim, M and Ibrahim, MHI and Wahab, MS and Haq, R and Marwah, OMF and Khirotdin, RK (2018) Additive Manufacturing of Copper-ABS Filament by Fused Deposition Modeling (FDM) / N Sa’ude ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 23-32. ISSN 18235514
Selamat, Farah Elida and Wan Izhan, Wan Hariz Iskandar and Baharudin, Bakhtiar Saffuan (2018) Design and Analysis of Centrifugal Pump Impeller for Performance Enhancement / Farah Elida Selamat ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (1). pp. 36-53. ISSN 18235514
Shah Aziz Shah, Mohamad Azam and Yunus, Mohd Azmi and Abdul Rani, Muhamad Norhisham and Tormodi, Nor Azela (2018) Closed Mode Separation of the Symmetrical Structure / Mohamad Azam Shah Aziz Shah...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 88-97. ISSN 18235514
Shahar,, Muhammad Syahmi and Mohd Salleh, Noor Azlina (2018) Cycle time improvement by lean Six Sigma for the Cutting Tool Production Line / Muhammad Syahmi Shahar and Noor Azlina Mohd Salleh. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 240-264. ISSN 1823-5514 ; 2550-164X
Shahir, Aziz Faiz
(2018)
Analysis on the effect of the upper wall opening on the natural ventilation performance in building / Aziz Faiz Shahir.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Shuib, Solehuddin and Abd Manap, Muhammad Faris and Abdullah, Abdul Halim and Dimon, Mohd Zamrin and Romli, Ahmad Zafir and Ahmed Shokri, Amran (2018) Epoxy-UHMWPE acetabular cup performance based on finite element study / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 117-140. ISSN 18235514
Shuib, Solehuddin and Ismail, Nur Faiqa and Yahya, Muhd Azman and Ahmed Shokri, Amran (2018) Analysis of an Improved Hybrid Stem Design for Total Hip Replacement (THR) / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 205-2015. ISSN 18235514
Singh, Amares and Durairaj, Rajkumar and Lee, Kong Chian and Sia, Yaw Yoong (2018) Reliability Study of Lead Free Sn-3.8Ag-0.7Cu and Copper (Cu) Substrate based on the Microstructure, Physical and Mechanical Properties / Amares Singh...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 169-180. ISSN 18235514
Solihin, Zainoor Hailmee and Wisnoe, Wirachman and Zailani, Ramlan and Yusof, Noriah (2018) Design and Simulation of a Rectangular Solar Collector for the Green Tower Development / Zainoor Hailmee Solihin ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 106-123. ISSN 18235514
Sulaiman*, Mohd Shahar and Manurung, Yupiter HP and Graf, Marcel and Bauer, Alexander (2018) Analysis of Weld Induced Distortion of Butt Joint using Simulation and Experimental Study / Mohd Shahar Sulaiman ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 78-89. ISSN 18235514
Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira and Marsi, Noraini (2018) Spectroscopic Studies of Oils and Its Synthesized Bio-Polymer / Nurulsaidatulsyida Sulong ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 50-60. ISSN 18235514
Syah, Arman and Astuti, Winda and Saedon, Juri (2018) Development of prediction system model for mechanical property in friction stir welding using Support Vector Machine (SVM) / Arman Syah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 216-225. ISSN 18235514
T
Taleghani, H. and Hassan, M.K and Abdul Rahman, R. Z. and Che Soh, A. (2018) Improving regenerative braking strategy using genetic algorithm for electric vehicles / H. Taleghani ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 121-130. ISSN 18235514
Tormodi, Nor Azela
(2018)
Characterization and model updating of modal parameters of a riveted joints structure / Nor Azela Tormodi.
(2018)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
U
Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian Anthropometric Data for Automotive Applications / Muhammad Abdulazeez Uba ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 68-88. ISSN 18235514
Ubaidillah, Ubaidillah and Hadi, Syamsul and Harjana, Harjana and Hairuddin, Khairunnisa and Mazlan, Saiful Amri (2018) Design and fabrication of magnetorheological elastomer vibration isolator / Ubaidillah ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 192-210. ISSN 18235514
Universiti Teknologi MARA, Fakulti Kejuruteraan Mekanikal (2018) Memorandum of understanding between Universiti Teknologi MARA and Royal Melbourne Institute of technology (RMIT) / Fakulti Kejuruteraan Mekanikal. (2018) UiTM MoU / MoA. (Unpublished)
V
V., Kausalyah and B.M.F., Norfiza Athyrah and S., Shasthri (2018) Mathematical Modelling of Plastic Injection Molding Process Using Central Composite Design (CCD) Sampling and PRSM / Kausalyah V. ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 226-238. ISSN 18235514
Venkataraman, Mohanapriya and Militký, Jiří and Mishra, Rajesh and Jandová, Soňa (2018) Unconventional measurement methods and simulation of aerogel assisted thermoregulation / Mohanapriya Venkataraman ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 62-96. ISSN 18235514
W
W., Kuntjoro and A. H. M., Saleh and R. E. M., Nasir and M. R., Abdullah* and M. G., Suada (2018) Flight thrust performance of quadcopter / W. Kuntjoro...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 210-221. ISSN 1823-5514 ; 2550-164X
Wan Fauzi, Wan Muhammad Syahmi
(2018)
Development of information architecture and novel simulation system for pillion assessment workstation / Wan Muhammad Syahmi Wan Fauzi.
(2018)
PhD thesis, thesis, Universiti Teknologi MARA.
Wan Mohamed, Wan Mazlina and Shuib, Adibah (2018) Optimisation Model based Dashboard for Managing Airport Aeronautical Revenues / Wan Mazlina Wan Mohamed and Adibah Shuib. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 124-141. ISSN 18235514
Y
Y, Aiman and S, Syahrullail (2018) The Effect of Low Temperature Test on Lubrication Performance of Palm Kernel Oil with Addition of PPD as A Lubricant (ASTM D4172) / Aiman. Y and Syahrullail. S. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 142-156. ISSN 18235514
Y.H., Teoh and H.G., How and H.H., Masjuki and M.A., Kalam (2018) Combustion characteristics, emissions and engine performances of a split injection diesel engine fueled with biodiesel blended fuels / Y.H. Teoh ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 217-229. ISSN 18235514
Yahya,, Omar and HP Manurung, Yupiter and Sulaiman,, Mohd Shahar and Prajadhiana,, Keval and Omar, Abdul Rahman and Kuntjoro, Wahyu (2018) Virtual manufacturing for prediction of Martensite Formation and Hardness Value induced by Laser Welding Process using Subroutine Algorithm in MSC Marc/Mentat / Omar Yahya...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 107-125. ISSN 1823-5514 ; 2550-164X
Yasuyuki, Morita and Fuga, Matsubara and Matsubara, Toku and Yang, Ju (2018) Use of a Tendon/Ligament Cell Sheet with Mesenchymal Stem Cells and Cyclic Stretch Stimulus for Tendon / Ligament Tissue Restoration / Yasuyuki Morita...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 1-11. ISSN 18235514
Yusof, Zarina and A.Rasid, Zainudin and Mahmud, Jamaluddin (2018) The active strain energy tuning on the parametric resonance of composite plates using finite element method / Zarina Yusof...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (1). pp. 104-119. ISSN 1823-5514 ; 2550-164X
Yusoff, H. and Suhaimi, S. and Hyie, K.M. and Iswadi, N. and Farhan, A. (2018) Experimental Investigation of Effects of Wing Camber on Drag for a Bio-Mimic MAV Flapping Wing / H. Yusoff ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 16-28. ISSN 18235514
Z
Zainuddin, Argustina and Kuzaiman, Nur Asiah and Mohd Salleh, Noor Azlina and Kasolang, Salmiah (2018) Quality green energy supply chain management practices in Malaysian / Argustina Zainuddin...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), 15 (2). pp. 1-12. ISSN 1823-5514 ; 2550-164X
Zainudin, Mohd Harris Fadhilah and Khashi’ie, Najiyah Safwa and Ab Rahim, Muhammad Saiful Ridzwan (2018) Investigation of the Quality and Mechanical Properties for Spot Welding of Reworked Galvannea and High Strength Steel (HSS) / Mohd Harris Fadhilah Zainudin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 7 (1). pp. 147-155. ISSN 18235514
Zakaria, N. J. and Zamzuri, H. and Mohamed Ariff, M. H. and Azmi, M. Z and Hassan, N. (2018) Lane change behaviour recognition using neural entwork / N. J. Zakaria ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 1-19. ISSN 18235514
Zakaria,, Muhammad Razlan and Abdul Kudus, Muhammad Helmi and Md Akil, Hazizan and Ahmad Rasyid, Mohd Fadli and Salim, Muhamad Saifuddin and Mohd Thirmizir, Mohd Zharif (2018) Dielectric performance of Hybrid Carbon Nanotube-Alumina Filled Epoxy Nanocomposites / Muhammad Razlan Zakaria...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 180-189. ISSN 18235514
Zubair, Ahmad Faiz and Abu Mansor, Mohd Salman (2018) Automatic Feature Recognition of Chamfer and Fillet for Turning Part Model by Volume Decomposition Method / Ahmad Faiz Zubair and Mohd Salman Abu Mansor. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 204-216. ISSN 18235514