Items where Subject is "Metal manufactures. Metalworking"

A

Ab Razak, Muhammad ‘Afwan (2017) Design and analysis of manufacturing facilities for friction stir welding process / Muhammad ‘Afwan Ab Razak. [Student Project] (Unpublished)

Ab.Rahman, Osman and Abu Bakar, Mohd. Faudzir (1985) Brassware cottage industry in Kuala Terengganu permanent mould design and diversification / Osman Ab.Rahman and Mohd.Faudzir Abu Bakar. [Student Project] (Unpublished)

Abd. Rahim, Rizalman and Ahmad Tajudin, Muhammad Amin (1997) Kajian masa dan kaedah pengukuran masa / Rizalman Abd. Rahim and Muhammad Amin Ahmad Tajudin. [Student Project] (Unpublished)

Abdul Hakim, Adli Adham (2022) Arduino welding table / Adli Adham Abdul Hakim. [Student Project] (Submitted)

Abdul Kadir, Ros Atikah (2017) TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. Masters Thesis , Universiti Teknologi MARA .

Abdul Kadir, Ros Atikah (2017) TiH₂ microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. Masters Thesis , Universiti Teknologi MARA .

Abdullah, Rosli and Sanusi, Mohd. Laili (1997) Keselamatan dan kesihatan di tempat kerja dalam industri pembuatan logam / Rosli Abdullah and Mohd. Laili Sanusi. [Student Project] (Unpublished)

Abdunkarim Yakoh@Ab Karim, Muhammad Asmadi (2022) Design and development of the catapult based on cotton ball launcher / Muhammad Asmadi Abdunkarim Yakoh@Ab Karim. [Student Project] (Submitted)

Abidin, Azrriq Zainul and Wan Abdul Rahaman, Wan Emri and HP Manurung, Yupiter and Abu Bakar, Muhammad Raimiey (2017) Fatigue Life Assessment of 9mm Thickness Low Carbon Steel with Multi-Objective Optimized Welding Process / Azrriq Zainul Abidin...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 4 (1) . pp. 143-153. ISSN 18235514.

Adnan, Abdullah Muhammad Al-Wahiduddin (2022) Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. [Student Project] (Submitted)

Ahmad, Mohd Faizal and Anuar, Mohd Sufian (2002) Upper bearing blank / Mohd Faizal Ahmad and Mohd Sufian Anuar. [Student Project] (Unpublished)

Ahmad Azman, Farhana (2005) Band saw and circular saw: current utilization in wood working industry / Farhana Ahmad Azman. [Student Project] (Unpublished)

Ahmad Latif, Imran Danial (2021) Rocky Eyewear / Imran Danial Ahmad Latif. [Entrepreneurship Project] (Unpublished)

Ahmad Suhaimey, Adibah Hannisa (2019) Potential of orange peel, saw dust and Moringa oleifera seed in adsorption of plumbum and cobalt from wastewater. [Student Project] (Unpublished)

Aman, Noor Akmar (2009) Investigation of relationship between weld cost and types of arc welding process / Noor Akmar Aman. Degree Thesis , Universiti Teknologi MARA .

Amir, Azlina and Mohamad, Azna and Said, Saidatun Atifah and Daud, Siti Rokiah and Suhaimi, Syazilin (1999) Sassa Enterprise / Siti Rokiah Daud... [et al.]. [Entrepreneurship Project] (Unpublished)

Asli, Muhammad Hadie Aizzuddin (2022) Thermal analysis on exhaust pipe of LPG combustor / Muhammad Hadie Aizzuddin Asli. [Student Project] (Unpublished)

Asnordin, Noor Asleena (2026) Value chain management practices and supply chain performance in manufacturing industry: the mediating role of supply chain integration. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Awan, Daneil and Embik, Jalani and Hannis, Roy (1997) Design of a product by cold forging / Daneil Awan, Jalani Embik and Roy Hannis. [Student Project] (Unpublished)

Awang, Rosmawati and Mohamad, Nor Hazama and Zainol, Siti Bariah and Abd razak, Rosmazia (2002) Delaq Design Sdn. Bhd. / Rosmawati Awang ... [et al.]. [Entrepreneurship Project] (Unpublished)

Aziz, Mohd Rozaiman and Ahmad, Roslan (2007) Specific energy absorption study on external inversion of metal tubes / Mohd Rozaiman Aziz and Roslan Ahmad. ESTEEM Academic Journal , 3 . pp. 3-13. ISSN 1675-7939.

Azman, Muhammad Haziq and Amri, Afif and Mohd Azri, Mohammad Izzat Nurhakim and Zulkifly, Muhamad Amrin Faiq Safety box delivery / Muhammad Haziq Azman ... [et al.]. [Student Project] (Unpublished)

Azman, Muhammad Syahir (2022) Study of hardness properties of butt welded joints using Metal Inert Gas (MIG) welding on mild steel plate / Muhammad Syahir Azman. [Student Project] (Unpublished)

Azmi Nahar, Puteri Alisya Irdina and Yahya, Nur Sufi Fatihah and Mohd Fadly, Nur Adriana Afrina and Zainuddin, Zainina Syahirah Aleya (2024) Saoirene: enhanced the old. In: Proceeding for International Undergraduates Get Together 2024 (IUGeT 2024) , November , Universiti Teknologi MARA, Perak .

B

Badrolsham, Nur Hanisah (2021) ENT 530 Social Media Portfolio: Outskiray / Nur Hanisah Badrolsham. [Entrepreneurship Project] (Unpublished)

C

Choubey, Vikas Kumar and Gangwar, Mayank and Dwivedi, J. P. (2010) Springback analysis of thin tubes under torsional loading / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi. Journal of Mechanical Engineering (JMechE) , 7 (2) . pp. 81-102. ISSN 1823-5514 ; 2550-164X.

G

Gangwar, Mayank and Choubey, Vikas Kumar and Dwivedi, J. P. and Das Talukder, N K. (2011) Springback analysis of thin tubes with arbitrary stress-strain curves / Mayank Gangwar … [et al.]. Journal of Mechanical Engineering (JMechE) , 8 (1) . pp. 57-76. ISSN 1823-5514 ; 2550-164X.

George, Eldridge (2009) Effect of loading rates on the fracture toughness of fiber metal laminate kenaf short fiber/epoxy/polyester / Eldridge George. Degree Thesis , University Teknologi MARA Shah Alam .

Ghazali, Nurul Aimi and Abd Malek, Mohamad Armanda Alnidzam and Tengku Mohd, Tengku Amran and Alias, Nurhashimah and Rahmat, Norhasyimi (2014) Tannin extraction from mangosteen peel for viscosifier and fluid loss additive in drilling fluid / Nurul Aimi Ghazali … [et al.]. In: IIDEX 2014: invention, innovation & design exposition.. Research Innovation Business Unit , Shah Alam, Selangor , p. 102 .

H

Harun, Muhammad Ismail (2012) Noise exposure and hearing loss in a steel industry / Muhammad Ismail Harun. [Student Project] (Unpublished)

Harun, Nur Hazreen Atiqah (2019) Cod reduction of electroplating wastewater using activated carbon prepared from sugarcane bagasse. [Student Project] (Unpublished)

Harun, Nur Hazreen Atiqah and Mohamad Pauzi, Syazana and Mohd Zainuddin, Nur Ain (2019) COD reduction of electroplating wastewater using activated carbon prepared from sugarcane bagasse: article. pp. 1-8.

Hasmi, Muhammad Hadzrey (2022) Fabrication of miniature foldable iron board / Muhammad Hadzrey Hasmi. [Student Project] (Unpublished)

Hud, Syazarisya (2021) Strawvenger / Syazarisya Hud. [Entrepreneurship Project] (Submitted)

Husain, Siti Hasniza (2001) Pereka logam halus sebagai satu kerjaya / Siti Hasniza Husain. [Student Project] (Unpublished)

I

Ibrahim, Mohd Fadhil (2014) Scrap metal management system (SMMS) / Mohd Fadhil Ibrahim. Degree Thesis , Universiti Teknologi MARA (UiTM) .

J

Jazlan, Nurul Amira and Goh, Lyn Dee and Ahmad, Hazrina and Ismail, Ruqayyah and Ahmad Zakwan, Fariz Aswan and Wahid, Norlizan (2025) The influence of steel fiber type on the flexural performance of steel fibre reinforced concrete beam. Journal of Sustainable Civil Engineering & Technology (JSCET) , 4 (2) : 1 . pp. 1-16. ISSN 2948-4294.

K

K. Yasari, N. M. L. P. and Muhayat, Nurul and Triyono, Triyono and Saputro, Y. C. N. (2018) Microstructural and Mechanical Properties of Underwater Wet Welded SS400 Steel / N. M. L. P. K. Yasari ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (3) . pp. 168-179. ISSN 18235514.

Kamaruddin, Asliza and Alias, Normaslina (2001) Study of technology of foundry / Asliza Kamaruddin and Normaslina Alias. [Student Project] (Unpublished)

Kamarul Bahrain, Siti Humairah (2019) Experimental characterisation and hyperelastic modelling of the mechanical behaviour of arenga pinnata – silicone biocomposite / Siti Humairah Kamarul Bahrain. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Kamaruzzaman, Nurul Syazlina (2023) Steelcase Manufacturing (Malaysia) Sdn Bhd / Nurul Syazlina Kamaruzzaman. Industrial Training. Faculty of Business and Management . (Submitted)

Kamsah, Ahmad Ismail and Mah Hasan, Mohd Zainudin (2001) Case study in sheet metal forming of bracket stabilizer / Ahmad Ismail Kamsah and Mohd Zainudin Mah Hasan. [Student Project] (Unpublished)

Kaspin, Saadiah (2008) Improvement of traditional gold recovery process for jewellery scrap / Saadiah Kaspin. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Koay, Mei Hyie and Mohd Fohimi, Nor Azirah and Budin, Salina and Che Maideen, Normariah and Abu, Md Zin (2023) Comparison of different surface pre-treatment on mild steel for cobalt-nickel-iron electroplating / Koay Mei Hyie … [et al.]. Journal of Mechanical Engineering (JMechE) , 20 (3) : 13 . pp. 263-278. ISSN 1823-5514 ; 2550-164X.

M

Mahmood, Mohd Khairil Adzhar and Aliasa’a, Mohd Nirwan (2005) Electronic clock, azan reader, and ringer (digital clock) / Mohd Khairil Adzhar Mahmood and Mohd Nirwan Aliasa’a. [Student Project] (Unpublished)

Maihadi, Mohd Nor Irwan (2001) Kemasyhuran pertukangan perak di Kelantan / Mohd Nor Irwan Maihadi. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Mat @ Muhammad, Muhd Faiz (2022) Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Mat Deraseh, Mohd Zukarnan (2010) Comparison between the estimated and actual productivity for the fabrication of a steel framework / Mohd Zukarnan Mat Deraseh. Degree Thesis , Universiti Teknologi MARA .

Mat Yasin @ Hashim, Ikhwan and Mat Rani, Kamaruzzaman (2005) Design electronic clock with azan reader and ringer / Ikhwan Mat Yasin @ Hashim and Kamaruzzaman Mat Rani. [Student Project] (Unpublished)

Mat Zain, Mohd Fadhli (2010) Computational fluid dynamics (CFD) simulation of triple exposure solar oven / Mohd Fadhli Mat Zain. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mazlan, Muhammad Aiman Hafizin (2022) Study of hardenability of mild steel and medium carbon steel by Jominy test / Muhammad Aiman Hafizin Mazlan. [Student Project] (Submitted)

Mazuadi, Muhammad Arid Azwar (2022) Welding demontration table with adjuster / Muhammad Arid Azwar Mazuadi. [Student Project] (Submitted)

Md Ishak, Habsah and Amin, M.Misbahul and Derman, Nazree and Ahmad, Khairel Rafezi (2008) High temperature corrosion behaviour of steel with a carbonate deposit at 1123k / Habsah Md Ishak … [et al.]. In: Proceedings STSS 2008 , 3-4 June 2008 , M.S. Garden Hotel, Kuantan Pahang .

Md Sanusi, Ahmad Shakell Naim (2022) Effect of microstructure on low carbon steel due to variable temperature using plasma cutting / Ahmad Shakell Naim Md Sanusi. [Student Project] (Unpublished)

Md Zabani, Muhammad Zulkhairee and Norazman, Norshafiq Rizal and Hisyam, Wajihuddin and Mohd Hamzah, Muhammad Rezuan (2015) Multipurpose stationary set / Muhammad Zulkhairee Md Zabani ... [et al.]. [Student Project] (Unpublished)

Mestor, Md. Khairul Fadli and Ismail, Khir Johari and Hasan, Mohd Fahmi (2005) The investment casting process of optimization / Md. Khairul Fadli Mestor, Khir Johari Ismail and Mohd Fahmi Hasan. [Student Project] (Unpublished)

Mohamed, Mohamad Faruqi (2018) Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mohamed Rashid, Mohamad Rohaidzat and Mahat, Noorsaidi and Nasir, Nazri (2009) Experimental study of composite cold-formed steel c-section connected back-to-back / Mohamad Rohaidzat Mohamed Rashid, Noorsaidi Mahat and Nazri Nasir. [Research Report] Research Management Institute (RMI). (Unpublished)

Mohammad Hatta, Mohammad Ekmal and Ramli, Azhar Saffuan (2005) Design an electronic azan clock, reader and ringer / Mohammad Ekmal Mohammad Hatta and Azhar Saffuan Ramli. [Student Project] (Unpublished)

Mohd Ghazali, Haziq Shazwan (2022) Study of hardness on the mild steel in various cooling medium / Haziq Shazwan Mohd Ghazali. [Student Project] (Submitted)

Mohd Hasan, Mohd Anuar and Syed Mat Daud, Syed Muhd. Abd. Matin (2005) Digital clock and Azan reader / Mohd Anuar Mohd Hasan and Syed Muhd. Abd. Matin Syed Mat Daud. [Student Project] (Unpublished)

Mohd Masri, Mohd Musawwir (2019) Accumulation of heavy metal in tea leaves (Camellia sinensis) at Sabah Tea Plantation and their potential risk to human health / Mohd Musawwir Mohd Masri. [Student Project] (Submitted)

Mohd Noor, Nurul Huda and Hedayat Tullah, Muhammad Saiful and Mohd Najmi, Mohamad Afif Hilmi and Muhammad Rehman, Mohd Harris and Mohd Azman, Muhammad Nurazhim and Ayub, Muhammad Fathurrahman (2023) Sparkle aplenty. pp. 161-166.

Mohd Salleh, Ahmad Faris and Bapokutty, Omar (1997) The study of the recycling pattern metals in Malaysia / Ahmad Faris Mohd Salleh and Omar Bapokutty. [Student Project] (Unpublished)

Mohd Sani, Muhammad Nazirul (2024) Development of a prototype barbeque grill using wiper motor / Muhammad Nazirul Mohd Sani. [Student Project] (Unpublished)

Mohd Shahid, Nadiatul Syima and Abdul Rasid, Salmi and Azmi, Alia and Rajan, Shantakumari and Nazli, Siti Nurshahida (2021) Accumulation and health risk of heavy metals in local and imported fish (rastrelliger kanagurta) sold in Shah Alam, Selangor / Nadiatul Syima Mohd Shahid [et al.]. Borneo Akademika , 5 (2) : 18 . pp. 184-193.

Mohd Syukri, Nur Ain Syuhada Syafika (2022) Study of hardness properties of buttwelded joints using Shield Metal Arc Welding (SMAW) on mild steel plate / Nur Ain Syuhada Syafika Mohd Syukri. [Student Project] (Unpublished)

Mohd Zain, Muhammad Amyrul Azri (2022) Design and fabrication of adjustable spanner / Muhammad Amyrul Azri Mohd Zain. [Student Project] (Unpublished)

Mohd Zalani, Aina Khairunnisa (2021) ENT 530 Business Plan / Aina Khairunnisa Mohd Zalani. [Entrepreneurship Project] (Submitted)

Moideen, Hafizul (2001) Penggunaan cincin perak bermotif bunga ketumbit dan pucuk kacang di kalangan remaja / Hafizul Moideen. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Muhamad Asyri, Azizan (2001) Ukiran bentuk cincin melambangkan imej kepada pemakai / Azizan Muhamad Asyri. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Muhammad, Mazhar and Ghazali, Azmi (1989) Pengkajian dan pembuatan pintu-pintu gril bagi industri-industri kecil di Malaysia / Mazhar Muhammad and Azmi Ghazali. [Student Project] (Unpublished)

Muhd Ma’asus, Asraf and mohd ali, mohd norazlishah (2005) Study the effect of injection pressure with density using hot chamber die-casting machine / Asraf Muhd Ma’asus and Mohd Norazlishah Mohd Ali. [Student Project] (Unpublished)

Mukhayok, Ahmad Zaidi and Mohd Razi, Amirudin and Abdullah, Muchlis and Amru, Amin (1997) Magnetic ceramic / Ahmad Zaidi Mukhayok … [et al.]. [Student Project] (Unpublished)

Mustafa, Mazuin (2001) Pengaplikasian motif tradisional pada cincin lelaki tinjauan di Pantai Timur / Mazuin Mustafa. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Mustaffa, Nurfatihah (2018) Exposure of fine particulate matter (PM₂.₅) in automotive industry among fitting line workers and health risk assessment / Nurfatihah Mustaffa. [Student Project] (Unpublished)

Mustapha, Ahmad Ezan and Mohd Husin, Hanizan (1992) Study of MIG metal transfer / Ahmad Ezan Mustapha and Hanizan Mohd Husin. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

N

Nasaruddin, Fidrouz (2001) Pengaplikasian motif - motif tradisional dan moden pada barangan kemas perak / Fidrouz Nasaruddin. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Nasir, Salsyanney (2019) Dermatitis risk assessment of heavy metals exposure: a case study in Tanjung Aru beach, Kota Kinabalu, Sabah, Malaysia / Salsyanney Nasir. [Student Project] (Submitted)

Nik Mohamad Kariman, Nik Mohamad Aqeel (2022) Study of hardness properties of buttwelded joints using Shield Metal Arcwelding (SMAW) on stainless steel plate / Nik Mohamad Aqeel Nik Mohamad Kariman. [Student Project] (Submitted)

Nik Mohd Zaki, Nik Iqlima (2022) The influence of thickness on mild steel in rapid cooling process / Nik Iqlima Nik Mohd Zaki. [Student Project] (Submitted)

Noer, Syafruddin (2007) The strengthening of aluminium 2024 sheet by accelerated aging / Syafruddin Noer. Masters Thesis , Universiti Teknologi MARA .

P

P Prajadhiana, Keval. and Manurung, Yupiter HP and Zainir, Muhammad Zohdi and Yahya, Omar and Saedon, Juri and Shahriman, Mohd and Omar, Abdul Rahman and Kuntjoro, Wahyu and Kasim, Khairulnizam and Ishak, Dendi P. and Bauer, Alexander and Graf, Marcel (2018) Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (2) . pp. 99-115. ISSN 18235514.

Prathabrao, M and Ibrahim, M H I and M Amin, Sri Yulis and Othman, M H (2018) Parameter optimization of metal injection moulding : A review / M Prathabrao ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (6) . pp. 100-114. ISSN 18235514.

R

Radzuan, Aiman Hanifi and Zulkifflee, Afiq and Mohd Sharudin, Muhammad Faris and Shahrun Nizam, Muhammad Majidi and Abdul Hadi, Muhammad Muaz (2016) Step Up Corparation : Portable Ladder / Aiman Hanifi Radzuan ...[et al.]. [Entrepreneurship Project] (Unpublished)

Raja Ma’arof, Raja Aziz (2006) Development of an expert system for sheet-metal-forming die manufacturing methodologies to support an extended design team / Raja Aziz Raja Ma’arof. PhD Thesis , Universiti Teknologi MARA .

Richard, P. Daisley and Chowdary, Boppana Veeraiah (2011) An investigation into the Metal Grinding Process under Sub-Zero Temperature Cutting Fluid / Richard P. Daisley and Boppana V. Chowdary. Journal of Mechanical Engineering (JMechE) , 8 (1) . pp. 1-24. ISSN 1823-5514 ; 2550-164X.

Rosli, Muhammad Izzat Hakimi (2022) Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. [Student Project] (Unpublished)

Russelan, Muhammad Sukhri (2017) The influence of hydrogen environment on mild steel welds / Muhammad Sukhri Russelan. [Student Project] (Unpublished)

S

Sapawi, Iqmal (2019) Bioaccumulation of heavy metals in sand bubbler crab (Scopimera globosa) at Tanjung Aru Beach, Kota Kinabalu, Sabah / Iqmal Sapawi. [Student Project] (Submitted)

Sa’ude, N and Ibrahim, M and Ibrahim, MHI and Wahab, MS and Haq, R and Marwah, OMF and Khirotdin, RK (2018) Additive Manufacturing of Copper-ABS Filament by Fused Deposition Modeling (FDM) / N Sa’ude ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 23-32. ISSN 18235514.

Shafii, Norafzan (2001) Pengaplikasian motif kartun pada kerongsang untuk penggunaan kanak-kanak / Norafzan Shafii. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Shahril, Muhammad Imran (2021) ENT 530 Social Media Portfolio: Vintage Watch 98 / Muhammad Imran Shahril. [Entrepreneurship Project] (Unpublished)

Shamsuddin, Saidatulakmar (2003) A study on electroplating / Saidatulakmar Shamsuddin. Jurnal Intelek , 1 . pp. 94-103. ISSN 2231-7716.

Shamsuddin, Saidatulakmar and Wanik, Baharuddin and Mohd Noor, Ahmad Fauzi and Ahmad, Zainal Ariffin (2004) A preliminary study using the Energy Dispersive X-Rays (EDX) technique on the electroless plated ceramic body / Saidatulakmar Shamsuddin ... [et al.]. Jurnal Intelek , 2 (1) . pp. 20-30. ISSN 2231-7716.

Sharrudin, Nurul Izzah Humairah and Md Isa, Nurun Nadhirah and Nawi, Liliwirianis and Mohd Jan, Sarah Laila and Mohd Khazaai, Siti Noorhafiza (2023) ICP analysis of heavy metals in Meretrix SPP from Pantai Sepat, Kuantan, Pahang / Nurul Izzah Humairah Sharrudin … [et al.]. Borneo Akademika , 7 (2) . pp. 77-84. ISSN 2462-1641.

Sia, Chee Kiong and Ker, Eng Ling and Phang, Chang (2006) Preliminary stage development of portable steel chamfering machine / Sia Chee Kiong, Ker Eng Ling and Phang Chang. In: Volume No. 1: Science and Technology , 30 – 31 May 2006 , Swiss Garden Resort & Spa Kuantan, Pahang .

Suhaimi, Muhamad Muhar (1999) Rekacorak pada permukaan barangan logam perak Melayu / Muhamad Muhar Suhaimi. [Student Project] (Unpublished)

Sulaiman, Ahmad Suhaimi and Mohd Noor, Zabil and Sulaiman, Azlina and Saidin, Zabitah (1998) AZAZ’S Industries (M) Sdn. Bhd. (Pengeluaran Skru) / Ahmad Suhaimi Sulaiman ... [et al.]. [Entrepreneurship Project] (Unpublished)

Syah, Arman and Astuti, Winda and Saedon, Juri (2018) Development of prediction system model for mechanical property in friction stir welding using Support Vector Machine (SVM) / Arman Syah ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (5) . pp. 216-225. ISSN 18235514.

T

Tuan Sulong, Tuan Nurul Norazura and Abd Halim, Suhaila and Ibrahim, Arsmah and HP Manurung, Yupiter (2014) PDE-based denoising tool for digital radiographic image of welding defect / Tuan Nurul Norazura Tuan Sulong … [et al.]. In: IIDEX 2014: invention, innovation & design exposition.. Research Innovation Business Unit , Shah Alam, Selangor , p. 93 . (Submitted)

Tukiran, Mohd Adham Akmal (2016) Effect of processing parameters in fabrication of Co-Ni- Fe coated mild steel for welding plate application \ Mohd Adham Akmal Tukiran. [Student Project] (Unpublished)

W

Wahab, Nor ‘Aini and Omar, Mohd Afian and Ahmad, Ismail Nasiruddin and Nordin, Nor Amalina and Amir, Amalina (2014) Novel formulation of waste rubber binder in producing net shaped and precise M2 HSS components / Nor'aini Wahab ... [et al.]. [Research Report] Research Management Institute (RMI). (Submitted)

Wan Ahmad, Wan Muhd Adham (2008) Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad. In: .

Wan Hamid, Wan Jama’aini and Abu Bakar, Siti Noraffida and Mat Zali, Nurmializa and Ahmad Zaki, Norashikin (2003) Northen Star Enterprise (Aluminium Product) / Wan Jama’aini Wan Hamid... [et al.]. [Entrepreneurship Project] (Unpublished)

Wan Hapandi, Wan Mohammad Fadhli (2009) Work study on industrial production in x-member assembly SRM 24 (welding) at Tracoma Sdn. Bhd. / Wan Mohammad Fadhli Wan Hapandi. Degree Thesis , Universiti Teknologi MARA .

Wan Ibrahim, Wan Muhammad Adli Mustaqim (2022) Portable sieve for greensand and cast Damascus steel knife / Wan Muhammad Adli Mustaqim Wan Ibrahim. [Student Project] (Submitted)

Y

Yaacob, Nor Azizah (1998) Nilai-nilai estetika didalam pembuatan barangan pewter / Nor Azizah Yaacob. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Yasin, Tajudin (2001) Perkembangan industri tembaga di Terengganu / Tajudin Yasin. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Ya’acob, Mohd Zulkanain (2013) Effect of temperature on electrical properties of undoped amorphous carbon thin films deposited by bias- assisted pyrolysis-CVD: article. pp. 1-5.

Ya’acob, Mohd Zulkanain (2013) Electrical properties of amorphous carbon thin films deposited by bias assisted pyrolysis-CVD. [Student Project] (Unpublished)

Yusof, Arina (2010) Nitrogen doping of amorphous carbon thin film prepared by camphor using thermal CVD / Arina Yusof. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Yusoff, Nasri (1985) Heat treatment of iron and steel / Nasri Yusoff. Diploma Thesis , Institut Teknologi MARA .

Yusoff @ Daud, Zuraine (2001) Penggunaan rekabentuk jenis estetik dalam barangan tembaga di Pantai Timur / Zuraine Yusoff @ Daud. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Z

Zabri, Mohd Zakuan and Nik Mohd Masdek, Nik Rozlin and Mohd Syehab, Muhammad Afiq (2025) Understanding of heat treatment on the durability of cobalt alloy thin film coated on mild steel / Mohd Zakuan Zabri, Nik Rozlin Nik Mohd Masdek and Muhammad Afiq Mohd Syehab. Journal of Mechanical Engineering (JMechE) , 22 (2) : 10 . pp. 133-147. ISSN e-ISSN: 2550-164X.

Zaini, Siti Nur Hidayah (2023) Natsteel Services (Malaysia) Sdn Bhd / Siti Nur Hidayah Zaini. Industrial Training. Faculty of Business and Management . (Submitted)

Zainul Abidin, Azrriq (2016) Investigation of product quality using virtual manufacturing on forging, punching-stamping and welding / Azrriq Zainul Abidin. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Zamre, Muhammad Amar Zulhaikal (2022) The influence of geometry specimens on mild steel in slow cooling process / Muhammad Amar Zulhaikal Zamre. [Student Project] (Submitted)

Zamri, Huzaymi (2006) Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri. Degree Thesis , Universiti Teknologi MARA .

Zulkiflee, Khairi Khazman and Zakaria, Nurul Sabihah (2021) Effect of laser energy on weld strength for neodymium yttrium aluminum garnet (ND:YAG) AT λ = 1.06 μm / Khairi Khazman Zulkiflee and Nurul Sabihah Zakaria. Journal of Academia , 9 (2) : 15 . pp. 145-153. ISSN 2289-6368.