Items where Subject is "Welding"

A

Ab Razak, Muhammad ‘Afwan (2017) Design and analysis of manufacturing facilities for friction stir welding process / Muhammad ‘Afwan Ab Razak. [Student Project] (Unpublished)

Abd Rahman, Azri Rahimi (2025) Analysis of additive manufacturing (AM) multi material behaviour using numerical simulation with experimental verification. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Abd. Rahim, Rizalman and Ahmad Tajudin, Muhammad Amin (1997) Kajian masa dan kaedah pengukuran masa / Rizalman Abd. Rahim and Muhammad Amin Ahmad Tajudin. [Student Project] (Unpublished)

Abdul Ghani, Osman and Sulaiman, Mohd. Marzuki (1990) Mengubahsuai peralatan ujikaji untuk kajian arka dan mengkaji ciri-ciri arka TIG. / Osman Abdul Ghani dan Mohd. Marzuki Sulaiman. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Abdul Hakim, Adli Adham (2022) Arduino welding table / Adli Adham Abdul Hakim. [Student Project] (Submitted)

Abdul Kadir, Ros Atikah (2017) TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. Masters Thesis , Universiti Teknologi MARA .

Abdul Rahman, Ahmad Salehin and Rasid, Ahmadi (1992) To study of spot welding and characteristic / Ahmad Salehin Abdul Rahman and Ahmadi Rasid. [Student Project] (Unpublished)

Abdunkarim Yakoh@Ab Karim, Muhammad Asmadi (2022) Design and development of the catapult based on cotton ball launcher / Muhammad Asmadi Abdunkarim Yakoh@Ab Karim. [Student Project] (Submitted)

Abu Bakar, Mohd Sarizal (2014) Improved welding refurbishment procedure for superalloys gas turbine using fea with experimental verification / Mohd Sarizal Abu Bakar. Masters Thesis , Universiti Teknologi MARA .

Adnan, Abdullah Muhammad Al-Wahiduddin (2022) Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. [Student Project] (Submitted)

Ahmad Hamidi, Shahfuan Hanif (2014) The performance of small wire submerged arc welding on carbon steel / Shahfuan Hanif Ahmad Hamidi. Masters Thesis , Universiti Teknologi MARA .

Ahmad Manshor, Zulkifli (2006) A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Andud, Dahia and Nordin, Norridzwan and Mat, Muhd Faiz and Saidin, Salina (2018) Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+M) using manual GMAW followed by HFMI/PIT / Dahia Andud... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 205-222. ISSN 18235514.

Armansyah, Armansyah (2020) Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Aziz, Natasha (2017) Exposure to welding fumes towards bronchoconstriction among workers at steel manufacturing factory / Natasha Aziz. [Student Project] (Unpublished)

Azman, Muhammad Syahir (2022) Study of hardness properties of butt welded joints using Metal Inert Gas (MIG) welding on mild steel plate / Muhammad Syahir Azman. [Student Project] (Unpublished)

B

Bahari, Mohd Saiful and Jaffarullah, M. Shamil and Mohamed, Zulkifli and ., Armansyah (2018) Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 174-188. ISSN 18235514.

Benjamin, Rayner (2010) To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Busari, Yusuf Olanrewaju (2022) A framework of coupled fem simulation for fatigue crack assessment of welded high strength low alloy S460G2+M steel based on linear elastic fracture mechanics / Yusuf Olanrewaju Busari. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Busu, Nur'Amirah (2017) Integration of travel control system with traverse test rig for friction stir welding process / Nur'Amirah Busu. Masters Thesis , Universiti Teknologi MARA (UiTM) .

F

Fadzil, Gege Nurfaizee (2009) Study on heat input for superalloy welding by using FEA simulation and experimental verification / Gege Nurfaizee Fadzil. Degree Thesis , Universiti Technologi MARA Shah Alam .

G

Geong, Denis and Muhammad, Zaharuddin and Md Noor, Mohd Rosli (2001) Inspection of welding defects by using ultrasonic method / Denis Geong, Zaharuddin Muhammad and Mohd Rosli Md Noor. [Student Project] (Unpublished)

Ghazali, Farizah Adliza (2018) Resistance spot weld properties improvement through post weld impact treatment / Farizah Adliza Ghazali. PhD Thesis , Universiti Teknologi MARA .

Ghazali, Farizah Adliza and Salleh, Zuraidah and HP Manurung, Yupiter and Md Taib, Yakub (2018) Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (6) . pp. 239-247. ISSN Journal of Mechanical Engineering (JMechE).

H

Hamid, Muhamad Hairi (2010) Design and fabrication of mechanized welding traction system / Muhamad Hairi Hamid. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Hasmi, Muhammad Hadzrey (2022) Fabrication of miniature foldable iron board / Muhammad Hadzrey Hasmi. [Student Project] (Unpublished)

I

Ismail, Lokman (2009) Evaluation and analysis of various pipe welding imperfections collected from the gas piping fabricators / Lokman Ismail. Degree Thesis , Universiti Teknologi MARA .

Ismail, Muhammad Hafiz (2010) Parameter investigation on robotic welding for ship panel structure" / Muhammad Hafiz Ismail. Degree Thesis , Universiti Teknologi MARA .

Ismail, Zureshakim (2010) Design and development of a turning system for Friction Stir Welding of pipe / Zureshakim Ismail. Degree Thesis , Universiti Teknologi MARA .

J

Jamaludin, Mohd Fadzil and Abdullah, Ahmad Baharuddin and Samad, Zahurin and Yusof, Farazila (2025) Formability analysis of dissimilar aluminium tailor welded blanks by low-powered fibre laser for lightweight automotive application / Mohd Fadzil Jamaludin ... [et al.]. Journal of Applied Engineering Design & Simulation (JAEDS) , 5 (1) : 6 . pp. 57-65. ISSN 2805-5756.

Jamaludin, Saiful Yazan (2009) Development of optimum range of joint design for carbon steel by small wire submerged arc welding process / Saiful Yazan Jamaludin. Degree Thesis , Universiti Teknologi MARA (UiTM) .

K

Kamarudin, Mohd Soleham Juraimi (2009) Study on properties of dissimilar metal welding between stainless steel (AISI 304L) and mild steel (AISI 1018). / Mohd Soleham Juraimi Kamarudin. Degree Thesis , Universiti Teknologi MARA .

Kasim, Mohamad Bazli (2010) Development of drive system for orbital pipe welding and cutting / Mohamad Bazli Kasim. Degree Thesis , Universiti Teknologi MARA .

L

Lidam, Robert Ngendang (2009) Simulation of laser and hybrid laser welding using SYSWELD / Robert Ngendang Lidam. Degree Thesis , Universiti Teknologi MARA (UiTM) .

M

Marhaban, Mohsin (2010) To obtain the optimum parameters for welding of aluminium using friction welding technique / Mohsin Marhaban. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Marwan, Shahrul Hisyam (2009) Study on resistance spot welding by using fem simulation method and experimental investigation / Shahrul Hisyam Marwan. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mat Jusoh, Fauzi (1987) Mereka bentuk meja kimpalan / Fauzi Mat Jusoh. [Student Project] (Unpublished)

Mat Zain, Faizul (2009) Development of friction stir welding of plastic using vertical milling machine / Faizul Hj Mat Zain. Degree Thesis , Universiti Teknologi MARA Shah Alam .

Mazuadi, Muhammad Arid Azwar (2022) Welding demontration table with adjuster / Muhammad Arid Azwar Mazuadi. [Student Project] (Submitted)

Md Sanusi, Ahmad Shakell Naim (2022) Effect of microstructure on low carbon steel due to variable temperature using plasma cutting / Ahmad Shakell Naim Md Sanusi. [Student Project] (Unpublished)

Minar, Abdul Halim (1988) Design and fabrication of an universal balanced positioner / Abdul Halim Minar. [Student Project] (Unpublished)

Mohamed, Mohamad Faruqi (2018) Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mohamed, Mohamed Ackiel and Manurung, Yupiter Hp (2017) Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651 / Mohamed Ackiel Mohamed and Yupiter HP Manurung. Journal of Mechanical Engineering (JMechE) , SI 2 (1) . pp. 83-99. ISSN 1823-5514 ; 2550-164X.

Mohammed Redza, Mohd Ridhwan (2016) Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza. Masters Thesis , Universiti Teknologi MARA .

Mohd Arif, Izzul Adli (2020) Effect of boron and carbon- added titanium filler on microstructure and mechanical properties of β-titanium alloy weldments / Izzul Adli Mohd Arif. PhD Thesis , Universiti Teknologi MARA .

Mohd Nor, Mohd Hafiz (2009) Development of a portable friction welding machine / Mohd Hafiz Mohd Nor. Degree Thesis , Universiti Teknologi MARA Shah Alam .

Mohd Syukri, Nur Ain Syuhada Syafika (2022) Study of hardness properties of buttwelded joints using Shield Metal Arc Welding (SMAW) on mild steel plate / Nur Ain Syuhada Syafika Mohd Syukri. [Student Project] (Unpublished)

Mohd Yasin, Mohamad Izad Asyaari (2012) Inspection of similar welding of aluminium alloy 5083 and stainless steel 304L using advance ultrasonic testing / Mohamad Izad Asyaari Mohd Yasin. Degree Thesis , Universiti Teknologi MARA .

Mohd Yunos, Mohd Azne (2010) To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos. Degree Thesis , Universiti Teknologi MARA .

Mohd Zain, Muhammad Amyrul Azri (2022) Design and fabrication of adjustable spanner / Muhammad Amyrul Azri Mohd Zain. [Student Project] (Unpublished)

Mohd Zin, Mohd Syazwan (2018) Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Mohd Zuhudi, Akramin (2005) Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Muhammad, Mohd Noor Ariff and Mohamad, Mohamad Nor Azuan (2002) Study of welding on aluminum alloy 5083 / Mohd Noor Ariff Muhammad and Mohamad Nor Azuan Mohamad. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

Muhammad, Norasiah (2015) Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad. PhD Thesis , Universiti Teknologi MARA .

Mustaffa, Nurfatihah (2018) Exposure of fine particulate matter (PM₂.₅) in automotive industry among fitting line workers and health risk assessment / Nurfatihah Mustaffa. [Student Project] (Unpublished)

Mustapha, Ahmad Ezan and Mohd Husin, Hanizan (1992) Study of MIG metal transfer / Ahmad Ezan Mustapha and Hanizan Mohd Husin. [Student Project] Faculty of Mechanical Engineering. (Unpublished)

N

Nik Mohamad Kariman, Nik Mohamad Aqeel (2022) Study of hardness properties of buttwelded joints using Shield Metal Arcwelding (SMAW) on stainless steel plate / Nik Mohamad Aqeel Nik Mohamad Kariman. [Student Project] (Submitted)

R

Rosli, Muhammad Izzat Hakimi (2022) Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. [Student Project] (Unpublished)

Russelan, Muhammad Sukhri (2017) The influence of hydrogen environment on mild steel welds / Muhammad Sukhri Russelan. [Student Project] (Unpublished)

S

Samsudin, Muhamad 'Afif (2009) Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin. Degree Thesis , Universiti Teknologi MARA .

Sulaiman, Mohd Shahar (2009) Simulation study of welding joint by using SYSWELD / Mohd Shahar Sulaiman. Degree Thesis , Universiti Teknologi MARA Shah Alam .

T

Tuan Sulong, Tuan Nurul Norazura and Abd Halim, Suhaila and Ibrahim, Arsmah and HP Manurung, Yupiter (2014) PDE-based denoising tool for digital radiographic image of welding defect / Tuan Nurul Norazura Tuan Sulong … [et al.]. In: IIDEX 2014: invention, innovation & design exposition.. Research Innovation Business Unit , Shah Alam, Selangor , p. 93 . (Submitted)

Tukiran, Mohd Adham Akmal (2016) Effect of processing parameters in fabrication of Co-Ni- Fe coated mild steel for welding plate application \ Mohd Adham Akmal Tukiran. [Student Project] (Unpublished)

W

Wan Ahmad, Wan Muhd Adham (2010) Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad. Degree Thesis , Universiti Teknologi MARA .

Wan Hapandi, Wan Mohammad Fadhli (2009) Work study on industrial production in x-member assembly SRM 24 (welding) at Tracoma Sdn. Bhd. / Wan Mohammad Fadhli Wan Hapandi. Degree Thesis , Universiti Teknologi MARA .

Wan Muhammad, Wan Din (2001) Perkembangan arca logam di Malaysia aplikasi teknik kimpalan / Wan Din Wan Muhammad. Degree Thesis , Universiti Teknologi MARA, Kelantan .

Y

Yaakub, Mohamad Yazman (2014) Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub. Masters Thesis , Universiti Teknologi MARA .

Z

Zahuri, Zairee Ezzam (2010) The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri. Degree Thesis , Universiti Teknologi MARA .

Zainal Abidin, Khairul Azhan and Bakar, Sukri (1996) Study on the effect of loading rate on fracture toughness of welded plate material / Khairul Azhan Zainal Abidin and Sukri Bakar. [Student Project] (Unpublished)

Zamri, Huzaymi (2006) Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri. Degree Thesis , Universiti Teknologi MARA .

Zulkiflee, Khairi Khazman and Zakaria, Nurul Sabihah (2021) Effect of laser energy on weld strength for neodymium yttrium aluminum garnet (ND:YAG) AT λ = 1.06 μm / Khairi Khazman Zulkiflee and Nurul Sabihah Zakaria. Journal of Academia , 9 (2) : 15 . pp. 145-153. ISSN 2289-6368.