Items where Subject is "Welding"

Group by: Creators | Item Type
Number of items at this level: 68.

Article

Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+M) using manual GMAW followed by HFMI/PIT / Dahia Andud... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 205-222. ISSN 18235514

Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 174-188. ISSN 18235514

Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 239-247. ISSN Journal of Mechanical Engineering (JMechE)

Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651 / Mohamed Ackiel Mohamed and Yupiter HP Manurung. (2017) Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 83-99. ISSN 1823-5514 ; 2550-164X

Effect of laser energy on weld strength for neodymium yttrium aluminum garnet (ND:YAG) AT λ = 1.06 μm / Khairi Khazman Zulkiflee and Nurul Sabihah Zakaria. (2021) Journal of Academia, 9. pp. 145-153. ISSN 2289-6368

Book Section

PDE-based denoising tool for digital radiographic image of welding defect / Tuan Nurul Norazura Tuan Sulong … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 93. (Submitted)

Thesis

TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Improved welding refurbishment procedure for superalloys gas turbine using fea with experimental verification / Mohd Sarizal Abu Bakar. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

The performance of small wire submerged arc welding on carbon steel / Shahfuan Hanif Ahmad Hamidi. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah. (2020) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

A framework of coupled fem simulation for fatigue crack assessment of welded high strength low alloy S460G2+M steel based on linear elastic fracture mechanics / Yusuf Olanrewaju Busari. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Integration of travel control system with traverse test rig for friction stir welding process / Nur'Amirah Busu. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on heat input for superalloy welding by using FEA simulation and experimental verification / Gege Nurfaizee Fadzil. (2009) Degree thesis, thesis, Universiti Technologi MARA Shah Alam.

Resistance spot weld properties improvement through post weld impact treatment / Farizah Adliza Ghazali. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Design and fabrication of mechanized welding traction system / Muhamad Hairi Hamid. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Evaluation and analysis of various pipe welding imperfections collected from the gas piping fabricators / Lokman Ismail. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Parameter investigation on robotic welding for ship panel structure" / Muhammad Hafiz Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Design and development of a turning system for Friction Stir Welding of pipe / Zureshakim Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Development of optimum range of joint design for carbon steel by small wire submerged arc welding process / Saiful Yazan Jamaludin. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on properties of dissimilar metal welding between stainless steel (AISI 304L) and mild steel (AISI 1018). / Mohd Soleham Juraimi Kamarudin. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Development of drive system for orbital pipe welding and cutting / Mohamad Bazli Kasim. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Simulation of laser and hybrid laser welding using SYSWELD / Robert Ngendang Lidam. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

To obtain the optimum parameters for welding of aluminium using friction welding technique / Mohsin Marhaban. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on resistance spot welding by using fem simulation method and experimental investigation / Shahrul Hisyam Marwan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Development of friction stir welding of plastic using vertical milling machine / Faizul Hj Mat Zain. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

Effect of boron and carbon- added titanium filler on microstructure and mechanical properties of β-titanium alloy weldments / Izzul Adli Mohd Arif. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Development of a portable friction welding machine / Mohd Hafiz Mohd Nor. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Inspection of similar welding of aluminium alloy 5083 and stainless steel 304L using advance ultrasonic testing / Mohamad Izad Asyaari Mohd Yasin. (2012) Degree thesis, thesis, Universiti Teknologi MARA.

To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Simulation study of welding joint by using SYSWELD / Mohd Shahar Sulaiman. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Work study on industrial production in x-member assembly SRM 24 (welding) at Tracoma Sdn. Bhd. / Wan Mohammad Fadhli Wan Hapandi. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Perkembangan arca logam di Malaysia aplikasi teknik kimpalan / Wan Din Wan Muhammad. (2001) Degree thesis, thesis, Universiti Teknologi MARA, Kelantan.

Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Student Project

Design and analysis of manufacturing facilities for friction stir welding process / Muhammad ‘Afwan Ab Razak. (2017) [Student Project] (Unpublished)

Kajian masa dan kaedah pengukuran masa / Rizalman Abd. Rahim and Muhammad Amin Ahmad Tajudin. (1997) [Student Project] (Unpublished)

Mengubahsuai peralatan ujikaji untuk kajian arka dan mengkaji ciri-ciri arka TIG. / Osman Abdul Ghani dan Mohd. Marzuki Sulaiman. (1990) [Student Project] (Unpublished)

Arduino welding table / Adli Adham Abdul Hakim. (2022) [Student Project] (Submitted)

To study of spot welding and characteristic / Ahmad Salehin Abdul Rahman and Ahmadi Rasid. (1992) [Student Project] (Unpublished)

Design and development of the catapult based on cotton ball launcher / Muhammad Asmadi Abdunkarim Yakoh@Ab Karim. (2022) [Student Project] (Submitted)

Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. (2022) [Student Project] (Submitted)

Exposure to welding fumes towards bronchoconstriction among workers at steel manufacturing factory / Natasha Aziz. (2017) [Student Project] (Unpublished)

Study of hardness properties of butt welded joints using Metal Inert Gas (MIG) welding on mild steel plate / Muhammad Syahir Azman. (2022) [Student Project] (Unpublished)

Inspection of welding defects by using ultrasonic method / Denis Geong, Zaharuddin Muhammad and Mohd Rosli Md Noor. (2001) [Student Project] (Unpublished)

Fabrication of miniature foldable iron board / Muhammad Hadzrey Hasmi. (2022) [Student Project] (Unpublished)

Mereka bentuk meja kimpalan / Fauzi Mat Jusoh. (1987) [Student Project] (Unpublished)

Welding demontration table with adjuster / Muhammad Arid Azwar Mazuadi. (2022) [Student Project] (Submitted)

Effect of microstructure on low carbon steel due to variable temperature using plasma cutting / Ahmad Shakell Naim Md Sanusi. (2022) [Student Project] (Unpublished)

Design and fabrication of an universal balanced positioner / Abdul Halim Minar. (1988) [Student Project] (Unpublished)

Study of hardness properties of buttwelded joints using Shield Metal Arc Welding (SMAW) on mild steel plate / Nur Ain Syuhada Syafika Mohd Syukri. (2022) [Student Project] (Unpublished)

Design and fabrication of adjustable spanner / Muhammad Amyrul Azri Mohd Zain. (2022) [Student Project] (Unpublished)

Study of welding on aluminum alloy 5083 / Mohd Noor Ariff Muhammad and Mohamad Nor Azuan Mohamad. (2002) [Student Project] (Unpublished)

Exposure of fine particulate matter (PM₂.₅) in automotive industry among fitting line workers and health risk assessment / Nurfatihah Mustaffa. (2018) [Student Project] (Unpublished)

Study of MIG metal transfer / Ahmad Ezan Mustapha and Hanizan Mohd Husin. (1992) [Student Project] (Unpublished)

Study of hardness properties of buttwelded joints using Shield Metal Arcwelding (SMAW) on stainless steel plate / Nik Mohamad Aqeel Nik Mohamad Kariman. (2022) [Student Project] (Submitted)

Study of hardness propeties of butt welded joints using Metal Inert Gas (MIG) welding on stainless steel plate / Muhammad Izzat Hakimi Rosli. (2022) [Student Project] (Unpublished)

The influence of hydrogen environment on mild steel welds / Muhammad Sukhri Russelan. (2017) [Student Project] (Unpublished)

Effect of processing parameters in fabrication of Co-Ni- Fe coated mild steel for welding plate application \ Mohd Adham Akmal Tukiran. (2016) [Student Project] (Unpublished)

Study on the effect of loading rate on fracture toughness of welded plate material / Khairul Azhan Zainal Abidin and Sukri Bakar. (1996) [Student Project] (Unpublished)

This list was generated on Tue Apr 16 18:16:18 2024 UTC.