Items where Subject is "Mechanics of engineering. Applied mechanics"

A

Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz. (2015) [Student Project] (Unpublished)

A new design of automatic hanging system / Mohd fIkri Abd Halim. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

A Study on Cryogenic Supercritical Carbon Dioxide Coolant Delivery Technique when Machining of AISI 1045 Steel / Erween Abd Rahim ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 37-49. ISSN 18235514

Structural behaviour of reinforced expanded polystyrene steel fibre lightweight concrete (EPSF-LWC) wall panel with opening under axial load / Jamilah Abd Rahim. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Resistance of flow over submerge pillar of different surface roughness - an experiment / Ahmad Haiqal Abd Rahman. (2022) [Student Project] (Unpublished)

IOT-Based automated feeding fish system using : NodeMCU / Afandi Asqalani Abdul Azis. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Notched impact strength of fibre - reinforced polymer (FRP) composites / Azlira Abdul Aziz. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Behaviour of reinforced concrete beam under dynamic loading / Mohd Nuri Abdul Aziz. (1997) [Student Project] (Unpublished)

Modelling of a steep near shore waves at Terengganu coastline during monsoon season using computational method / Abdul Wafiq Qayyum Abdul Azmi. (2022) [Student Project] (Submitted)

Study of fatigue crack propagation (FCP) of polymethylmethacrylate (PMMA) at a different R ratio / Hashim Abu Hassan. (1991) [Student Project] (Unpublished)

Synthesis and characterization of NiFeMo alloy / Ahmad Safuan Abu Talib. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Heat transfer analysis of different cooling medium on a condenser of refrigeration system / Amira Natasha Amir Rizal. (2022) [Student Project] (Unpublished)

Development of standard time formula for welding of mild steel / Muhammmad Rashidi Arif and Zaidan Osman. (1992) [Student Project] (Unpublished)

Development of mechanistic flexible pavement design method for Malaysian conditions / Ahmad Kamil Arshad. (2009) PhD thesis, thesis, Universiti Teknologi MARA.

The design and fabrication of a free flowing water turbine for UiTM-PERHILITAN Research Center Taman Negara / Muhammad Zul Hilmi Asmad. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Study of failure phenomena on Proton Waja's door handle / Mohd Lukman Awg. Noh. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Evaluation of initiative by UiTM as a sustainable campus: energy / Nur Farahin Azhar. (2013) [Student Project] (Unpublished)

B

Artificial neural network model for predicting windstorm intensity and the potential damages / Mohd Fatruz Bachok. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Determination of charring rates of laminated veneer lumber made from selected Malaysian tropical timber exposed under standard fire exposure / Zulhazmee Bakri. (2020) PhD thesis, thesis, Universiti Teknologi MARA Shah Alam.

Initial and progressive failure analysis of a composite wing spar structure / Bruce Ralphin Rose.J and Priyadharshini.S. (2017) Journal of Mechanical Engineering (JMechE), 14 (2). pp. 167-183. ISSN 1823-5514 ; 2550-164X

C

Effect of lateral load due to wind and seimic loading to tall building in Malaysia / Siti Nor Marlina Che Hamipah. (2007) [Student Project] (Submitted)

Study on laminated composite material using numerical approach / Ayurahani Che Lah. (2006) [Student Project] (Unpublished)

Propulsion system design of GRP payang potong belakang / Ahmad Ikmal Haziq Che Mohamad Noor. (2022) [Student Project] (Unpublished)

D

Analysis of room modes and sound pressure level (SPL) in UiTM / Sharipah Daud. (2007) [Student Project] (Unpublished)

H

The effect of machining parameters on surface integrity of mild steel material using lathe machine / Faiz Azzhar Hamzah. (2022) [Student Project] (Submitted)

Mechanical properties of tire replaced concrete / Khadijah Hamzah. (2007) [Student Project] (Unpublished)

Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. (2022) [Student Project] (Unpublished)

Simulation of chiller water storage / Hafiz Zaim Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

I

Structure design and analysis of GRP Bedar / Muhammad Adam Idris. (2022) [Student Project] (Unpublished)

Fabrication of nanocomposited Sn-doped ZnO/TiO₂ based dye-sensitized solar cells / Saurdi Ishak. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Effect of surface texture towards product performance / Mohd Fauzi Ismail, Muniroh Hamat and Rizal Mohamed Nor. (2007) [Research Reports] (Unpublished)

J

Grid-based remotely sensed hydrodynamic surface runoff model using emissivity coefficient / Jurina Jaafar. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Fracture behaviour of different volume fraction of alumina (AI₂O₃) reinforcement metal matrix composite / Junaidah Jai. (2005) Masters thesis, thesis, Universiti Teknologi MARA.

Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. (2022) [Student Project] (Unpublished)

Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin. (2016) [Student Project] (Unpublished)

Multi display scan in detecting weld discontinuity of thick carbon steel plate using ultrasonic testing phased array (UTPA) with comparison to conventional ultrasonic testing (UT) / Jeffry Jamil, Syed Yusainee Syed Yahya and Rosnah Zakaria. (2020) Scientific Research Journal, 17 (2). pp. 210-220. ISSN 2289-649X

Multipurpose table report / Muhammad Harith Iqmal Johari... [et al.]. (2021) [Student Project] (Submitted)

Mechanical properties of compressed soil brick by using jute fiber / Shahrul Nizam Julis. (2019) [Student Project] (Unpublished)

Computational fluid dynamics (CFD) analysis of a blended wing body (BWB) unmanned aerial vehicle (UAV) with elevator deflection of - 15° (upward) at 0.1 and 0.3 mach number / Mohd. Fazil Jundam. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

K

Investigation on pressure variation of steam on efficiency of steam powered motor / Siti Norshafiqah Kamal Azman Shah. (2022) [Student Project] (Submitted)

Synthesization and Microstructural Analysis of Arenga Pinnata Fibres and Silicone Rubber for New Silicone Biocomposite Material / Siti Humairah Kamarul Bahrain ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 15-30. ISSN 18235514

L

A design of machine vision system for the automatic surface profiling measurement using shadow moire technique / Lim Teong Yeong, Lim Juinn Hsuh and Muhamad Othman. (2008) [Research Reports] (Unpublished)

M

Resistance prediction of solar boat in calm water using computational fluid dynamic approach / Muhamad Daniel Haiqal Md Izaninulhadi. (2022) [Student Project] (Unpublished)

The study of steel production technology in Malaysia / Muhammad Ezanee Md Zain and Nasarudin Abd Wahab. (1997) [Student Project] (Unpublished)

Resistance prediction of amphibious boat in calm water using computational fluid dynamic approach / Nabilatul Athirah Misnan. (2022) [Student Project] (Submitted)

Fabrication of semi-metallic brake friction materials using kenaf powder and activated carbon from palm kernel shell through powder metallurgy process / Mohammad Hairul Amri Mohad Yunus. (2016) [Student Project] (Unpublished)

CFD analysis / Muhammad Syakir Mohamad Saidi ... [et al.]. (2021) [Student Project] (Submitted)

Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651 / Mohamed Ackiel Mohamed and Yupiter HP Manurung. (2017) Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 83-99. ISSN 1823-5514 ; 2550-164X

Investigation of solution thermodynamics and solute characterization of citric acid polymorphs / Farah Eliza Mohamed Rasidi. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

CFD modelling of blood flow in portal vein hypertension with and without thrombosis for non-newtonian / Mohd Adib Mohammed Taha. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. (2022) [Student Project] (Submitted)

Experimental investigation of flow behaviour of open channel flow through a linear straight contraction / Muhammad Izhar Firki Mohd Adenan. (2022) [Student Project] (Submitted)

Determination of energy losses in pipe fittings of a flow with variation of reynold number / Muhammad Azim Azran Mohd Ali. (2022) [Student Project] (Submitted)

Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie. (2022) [Student Project] (Submitted)

Evaluation of R-12 performance in car air conditioning / Azizulfaizei Mohd Ariff. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Computational fluid dynamics (CFD) simulation of quintuple exposure solar oven / Mohd Effendy Nordin. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Simulation of flow behaviour of open channel flow through a linear straight contraction using computational approach / Muhammad Amir Ashraf Mohd Haziman. (2022) [Student Project] (Submitted)

Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. (2022) [Student Project] (Unpublished)

Computational fluid dynamics (CFD) study of a rear spoiler fitted to sedan car / Mohd Aliff Mohd Nor. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Properties of finger jointing effect by adhersive types on three different species / Mohd Khaidir Mohd Nor. (2013) [Student Project] (Unpublished)

Production design of an amphibious boat / Rabiatul Adawiah Mohd Razalli. (2022) [Student Project] (Submitted)

Wear and adhesive performance investigation on Co-Ni-Fe coated mild steel / Muhammad Adib Mohd Sabri. (2017) [Student Project] (Unpublished)

Fatigue behaviour of weathered rock under cyclic loading / Nurul Ainain Mohd Salim. (2018) PhD thesis, thesis, Universiti Teknologi MARA.

Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

Bio-based cellulosic composites made from local cellulosic fibres mixed with kenaf / Mohd Khairi Mohd Yusoh. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical and physical properties of brass and steel / Nur Aisha Iffat Mokhtar. (2022) [Student Project] (Submitted)

Development of instrumentation system for temperature control / Abd Halim Mokri. (2008) [Student Project] (Unpublished)

Microstructure and dielectric properties of BiFe03 co-doping with Eu and La / Munirah Mostapa Kamal. (2012) [Student Project] (Unpublished)

Distributed single mode fiber sensor and fiber Bragg grating for displacement and temperature sensing / Nor Jannah Muhamad Satar. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. (2021) [Student Project] (Submitted)

N

Rapid entire body assessment to quantify ergonomic risk among mechanics / Nurul Shamira Napiah. (2010) [Student Project] (Unpublished)

Hull design & stability analysis of solar boat / Nik Najmi Nik Min. (2022) [Student Project] (Submitted)

Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari. (2022) [Student Project] (Unpublished)

Simulation of variation of flow in different types of pipe fittings using computational approach / Muhamad Azim Najmi Nor Azhari. (2022) [Student Project] (Submitted)

O

Design and fabrication of electric skateboard with front light / Mohamad Afif Jazimin Othman. (2022) [Student Project] (Submitted)

R

Characteristics of amorphous Al65Cu35 binary alloy and Al65Cu35-XTiX ternary alloys prepared by mechanical alloying of elemental powder / Rosedhila Ramli. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

An analysis of stress over riveted repair on a stiffened panel / Ramyzan Ramly and Wahyu Kuntjoro. (2005)

Structure design and analysis of GRP Payang boat / Muhammad Azri Faiz Roslan. (2022) [Student Project] (Unpublished)

Heavy duty hand truck / Abdul Hadi Rosli ... [et al.]. (2021) [Student Project] (Submitted)

S

Heat transfer analysis of different cooling medium on a condenser / Muhammad Faris Saiful Anuar. (2022) [Student Project] (Unpublished)

Finite element analysis of proximal femur using Charnley elite type stem / Muhamad Zaidi Salem. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Automated safety system for air pollution detection via android / Ahmad Badrun Amin Samsul Kamal and Muhammad Daneal Hakim Mohd Adli. (2019) [Student Project] (Submitted)

Efficiency of mechanization practices on harvesting in oil palm plantation / Amirul Izzat Sanit. (2016) [Student Project] (Unpublished)

Design and fabricate universal hook for car usage / Sayed Saqif Iman Sayed Safari. (2022) [Student Project] (Submitted)

Influence of prosthesis stem tapers in cementless hip arthrosplasty / Muhamad Firdaus Selamat. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

The mechanical behaviour of weathered granitic rock slope by wetting and drying cycle / Ummi Khadijah Shamsuddin. (2018) [Student Project] (Unpublished)

Strength performance of green lightweight concrete made of waste paper sludge ash and recycled aggregate / Siti Shahidah Sharipudin. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Structural behaviour of cracked Pre-Tensioned (PRT) concrete beam under vertical static load / Nurul Huda Suliman. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

T

Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling (FDM) Process / Tuan Noraihan Azila Tuan Rahim...[et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 75-90. ISSN Special Issue Engineering for Humanity Vol 2

Y

History of metallurgical development of boat propeller and keris (a comparison) / Yusniza Yem. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Performance of finger joint from Sepetir / Yuhanis Yunus. (2015) [Student Project] (Unpublished)

Z

A comprehensive study on car engines / Nadrah Zaabar. (2003) [Student Project] (Unpublished)

Propulsion system design of rigid tube rib / Faiz Syazwan Zulkifli. (2022) [Student Project] (Submitted)