Items where Subject is "TA Engineering. Civil engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | P | R | S | T | U | W | Y | Z
Number of items at this level: 123.

A

A study of the mini bus service in Butterworth / Ami Adeela A.Rahman. (2007) [Student Project] (Submitted)

Geotechnical properties of clay soil in Alor Setar / Eliyani Yazreen A.Rani. (2006) [Student Project] (Submitted)

A needs-analysis on the engineering undergraduates' communication skills / Suzana Ab. Rahim. (2008) Esteem Academic Journal, 4 (2). pp. 163-184. ISSN 1675-7939

Automatic ear recognition under varying illumination / Ali Abd Almisreb. (2012) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Form-finding using nonlinear analysis method of tensioned fabric structure in the form of half-costa with different boundaries / Nurul Afiqah Abd Malek. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Merekabentuk susunatur logi bengkel foundri / Mohd Tazri Abd Rahim and Mohd Suffian Musa. (2000) [Student Project] (Unpublished)

E-fundamental of engineering seminar (sesi 20214 & 20222) / Nor Hanim Abd Rahman. (2022) e-Buletin JSKM, 8. ISSN 2637-0077

Bridge Inspection at Sungai Baru, Kuala Kurau, Perak / Siti Murni Abdul Ghani. (2015) [Student Project]

Duta Marine Sdn Bhd / Akmyr Anaf Suffi Abdul Kadir. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

Civil maintenance management based on CMMS Beam of University Science of Malaysia (Health Campus), Kubang Kerian Kelantan / Muhammad Ariff Abdul Manaf. (2015) [Student Project]

Low velocity impact response of kenaf/epoxy composites exposed to corrosive solutions / Abdul Hakim Abdullah ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 12. pp. 199-216. ISSN 1823-5514 ; 2550-164X

Kegunaan bangunan di Pusat Bandar Kelang (Kelang Utara dan Kelang Selatan) / Ilham Abu Hassan. (1981) [Student Project] (Unpublished)

Friction and wear properties of FRP composites and nanoclay-filled BFRP composites / Anis Adilah Abu Talib. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

A laboratory study on the properties of alluvial marine soil : case study of Prai area / Aina Adam. (2007) [Student Project] (Submitted)

Influence of piles roughness on negative skin friction/ Mohamad Zamri Adb. Rani. (2000) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Thermoplastic Transverse Bar as Speed Reducer / Muhammad Akram Adnan. (2003) ESTEEM Academic Journal, 1. ISSN 2289-4934

Seepage characteristics of sandstone, siltstone, and mudstone / Azura Ahmad, Zainab Mohamed and Mohd Hisbany Mohd Hashim. (2007) [Research Reports] (Unpublished)

The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad. (2007) Masters thesis, thesis, Universiti Teknologi MARA.

The modelling of lateral movement of soft soil using finite element analysis and laboratory model / Juhaizad Ahmad, Nor Hazwani Md Zain and Prof. Madya Dr. Yasmin Ashaari. (2010) [Research Reports] (Submitted)

Model for implementation of green construction / Afzan Ahmad Zaini. (2017) In: The Doctoral Research Abstracts. IGS Biannual Publication, 11 (11). Institute of Graduate Studies, UiTM, Shah Alam.

Development and kinematic analysis of rocket launcher with different ball parameter / Muhammad Ilhan Salihin Alaman. (2022) [Student Project] (Submitted)

Laboratory verification of critical mixing point method for conservative and nonconservative pollutants / Hashim Ali. (1993) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Tendering procedure for maintenance works at GIATMARA Alor Gajah, Melaka / Muhammad Kamarul Amri Ali. (2015) [Student Project]

Architectural overreach; investigating the absence of structural engineers in building design: a case study in Herat, Afghanistan / Arif Alkozay, Amanollah Faqiri and Rahimullah Stankzai. (2024) Journal of Smart Science and Technology, 4 (2): 2. pp. 16-26. ISSN 2785-924X

Integrasi ilmu Al-Quran dan bidang kejuruteraan: kajian analisis terhadap manfaat air dalam meningkatkan pengeluaran minyak mentah / Amni Haslinda Alpandi, Nurul Badriyah Ali and Amirah Anuar. (2023) Journal of Contempory Islamic Studies, 9 (1): 7. pp. 1-17. ISSN ISSN 2289-9634 e-ISSN 0128-0902

Evaluation of public bus demand along the Butterworth-Kepala Batas route / Elizebeth Loren anak Ajis. (2007) [Student Project] (Submitted)

Comparison of conventional concrete with roller compacted concrete in dam construction / Hubert Maphel Anak Jonathan Tait. (2006) [Student Project] (Unpublished)

Comparison of conventional concrete with rollerc compacted concrete in dam construction / Hubert Maphel anak Jonathan Tait. (2006) [Student Project] (Submitted)

Structure analysis of cable stayed footbridge (simulation and modelling) design and calculation / Edid Azhar Atan. (2006) [Student Project] (Unpublished)

Simulation of a flow over a mound-type breakwater of different surface roughness using computational approach / Muhammad Hafiz Haikal Azahar. (2022) [Student Project] (Submitted)

Preparation of iron electrode derived from iron steel waste for decolorization of various type of dyes via electrocoagulation method / Nurul Athikah Azizan. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

B

IR laser light detector / Ahmad Zulhilmi Bahari@Ahmad and Ahmad Zakirullah Abdul Kadir. (2000) [Student Project] (Unpublished)

A pilot study on the development of automated stress path triaxial test apparatus / Bahardin Baharom, Ir. Zainab Mohamed and V Azad Chako. (1995) [Research Reports] (Unpublished)

Biodegradability study of PLA/syzygium aromaticum composite in buried soil and open environment / Ahmad Izhharuddin Bahmad Zaidi. (2020) [Student Project] (Unpublished)

The influence of graphite filler on the viscoelastic and mechanical characteristics of PC/ABS hybrid composite for automotive applications / Basanta Kumar Behera ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (1): 8. pp. 143-161. ISSN 1823-5514 ; 2550-164X

Impak pusat internet desa terhadap pembangunan komuniti luar bandar: keusahawanan sosial sebagai strategi pemangkin / Abdul Manaf Bohari. (2012) Journal of Academic Minds, 6 (1). pp. 91-106. ISSN 1823-6634

Prediction of consolidation from reduced consolidation testing time (continuation) / Md Jalal Bongkik. (1981) [Student Project] (Unpublished)

C

Analysis and experiment of blank holder gap in the cylindrical cup deep drawing of low carbon steel to prevent cracking-wrinkling / Susila Candra and Hudiyo Firmanto. (2024) Journal of Mechanical Engineering (JMechE), 21 (1): 7. pp. 123-142. ISSN 1823-5514 ; 2550-164X

D

Analysis of room modes and sound pressure level (SPL) in UiTM / Sharipah Daud. (2007) [Student Project] (Unpublished)

Equation development for resistance coefficient estimation for selected rivers in the highland areas of Malaysia / Susie Nadya David Asen. (2010) Masters thesis, thesis, Universiti Teknologi MARA.

Renewable energy in ecotourism: a case study of Trinidad and Tobago’s implementation challenges / Malaika Dedier ... [et al.]. (2024) Journal of Smart Science and Technology, 4 (2): 3. pp. 27-46. ISSN 2785-924X

E

Infra red alarm / Koyah Embong and Normah Hussin. (1989) [Student Project] (Unpublished)

Strength behaviour of concrete made with titanium dioxide as a partial cement replacement / Tengku Nor Qistina Engku Daud @ Tengku Din. (2020) [Student Project] (Unpublished)

F

Structural behaviour of thin-walled composited-filled beams / Fauzi, M.A. and Ghazali, E. (2014) In: TeSSHI 2014- Technology, Science Social Sciences, Humanities, 5 & 6 Nov 2014, One Hotel Helang, Langkawi Kedah Malaysia.

G

Modal extraction accuracy using Single Station Time Domain (SSTD) techniques / A. F. Ghazali and A. A. Mat Isa. (2012) Journal of Mechanical Engineering (JMechE), 9 (1). pp. 123-138. ISSN 1823-5514 ; 2550-164X

H

Effect of elevated temperatures on Tenera oil palm shell concrete on compressive strength and weight loss / Mohammed Fadhil Hama, Mohammed Parvez Anwar and Teck Leong Lau. (2022) Journal of Mechanical Engineering (JMechE), 11 (1): 18. pp. 319-332. ISSN 1823-5514 ; 2550-164X

Development of safety practices framework for collapse accident at the construction site: a case study for school building and infrastructure works in Pulau Pinang / Nadiatul Husna Hassim. (2019) [Student Project] (Unpublished)

Fabrication of porous TiNb alloy incorporated with TiH2 powder by powder metallurgy processing route for implant applications / Siti Mariana Hosnie. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

I

Computer aided design of simply supported, Class 1, prestressed post-tensioned concrete beam with effective bond, in accordance with BS 5400 : 1978 / Azmi Ibrahim. (1986) [Student Project] (Unpublished)

Proceedings of Civil Engineering Colloquium 2020 / Dr. Anas Ibrahim … [et al.]. (2020) In: Proceedings of Civil Engineering Colloquium 2020, 04 March 2020, Bilik Perdana 1, Aras 2, Blok Perdana, Universiti Teknologi MARA Cawangan Pulau Pinang. (Unpublished)

Permeability of aggregates/ Mohamad Zaidi Ibrahim. (1997) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Sustainable strategies for high local youth employment in the construction workforce in Malaysia / Norizzati Ibrahim, Z.Y. Zulkiflee and Atikah Najwa Zainuddin. (2018) Journal of Academia, 6 (1). pp. 53-66. ISSN 2289-6368

Water: ethylene glycol properties alteration upon dispersion of Al2O3 and SiO2 nanoparticles / Muhammad Syafiq Idris, Irnie Azlin Zakaria and Wan Azmi Wan Hamzah. (2024) Journal of Mechanical Engineering (JMechE), 21 (1): 14. pp. 255-277. ISSN 1823-5514 ; 2550-164X

Car parking in city centre: case study of Georgetown CBD / Ahmad Suhaimi Ismail. (1980) Diploma thesis, thesis, Universiti Teknologi MARA.

Development of deformation medelling software on geodetic monitoring network using / Iterative weighted similaritary transformation / (IWST) / Muhammad Taufik Ismail. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Development of deformation modelling software on geodetic monitoring network using / Iterative weighted similarity transformation / (IWST) / Muhammad Taufik Ismail. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Performance of low and medium-rise concrete frames under various intensities earthquake in Malaysia / Rozaina Ismail, Azlan Adnan and Azmi Ibrahim. (2011) Jurnal Intelek, 6 (1). pp. 101-104. ISSN 2231-7716

J

Layout design for mechanical workshop in the new campus / Aryanty Jaafar and Dayang Esmayati Abu Seman. (2003) [Student Project] (Unpublished)

The effect of the lattice girder on the composite action of the half slab / Mohd Zalimi Ja’afar. (2000) [Student Project] (Unpublished)

K

Strength-mineralogy interaction on weathered mudrock of Semanggol formation / Mohamad Hisam Kamaruddin. (2018) [Student Project] (Unpublished)

Numerical modelling of bearing strength of concrete strengthening with carbon fibre reinforced polymers (CFRP) wrapping for different thickness of CFRP Sheet / Filzah Sofiya Kamaruzaman and Norrul Azmi Yahya. (2024) Journal of Sustainable Civil Engineering & Technology (JSCET), 3 (1): 9. pp. 114-132. ISSN 2948-4294

Secondary sedimentation in pipes theoretical derivations and field validation / Mohammad Halim Khairoji. (1994) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

The Effect of Physics Instruction on Conceptual Change and Problem-Solving In The Domain of Electric Circuits Among High-Achiever College Students / Beh Kian Lim and Nazlinda Abdullah. (2003) ESTEEM Academic Journal, 1: 2. ISSN 2289-4934

L

The Fate Of Heavy Metals In A Stabilization Pond System Treating Household Wastewater / Lim Boon Tik. (2003) ESTEEM Academic Journal, 1. ISSN 2289-4934

Geostatistical analysis of spatial variability of a clay deposit / Lim Jit Kheng, Ng Set Foong and Muhammad Khusairi Osman. (2009) [Research Reports] (Unpublished)

M

A Study On The Effectiveness Of Ground Improvement Techniques / M.F Ahmad, N.A. Zakaria, M.R. Selamat. (2003) ESTEEM Academic Journal, 1. ISSN 2289-4934

A case study on methods used in the design of airport pavements / Hanizan Ma'arof. (1993) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Design fabrication and characterization of pH transducer on printed circuit board (PCB) / Norhidayatul Hikmee Mahzan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mechanical properties investigation on virgin and recycled polypropylene / Nathan Martinus. (2017) [Student Project] (Unpublished)

An integrated model for international market entry location, entry timing and entry mode (ELETEM) decisions of Malaysian construction firms / Che Maznah Mat Isa. (2016) PhD thesis, thesis, Universiti Teknologi MARA.

Design and fabrication of vegetables washer / Muhammad Naqib Iqbal Mat Sehak. (2022) [Student Project] (Submitted)

A study on mechanical safety aspects of a riveted joint used in a baby walker / Iskandar Dzulkarnaen Mazlee and Mohamad Nizam Zulkifly. (2002) [Student Project] (Unpublished)

Pipelines corrosion / Ahmad Shukri Md Ali and Mohd Faizal Ghazali. (2003) [Student Project] (Unpublished)

The effects of chemical treatment parameters on the yield of bamboo fibers extracted / Nur Ilya Farhana Md Noh ... [et al.]. (2024) Journal of Sustainable Civil Engineering & Technology (JSCET), 3 (2): 4. pp. 34-42. ISSN 2948-4294

Computer aided design of three phase induction motor using C++ / Megat Ahmad Fauzi Megat Rasidin. (1996) Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Fracture mechanics and its application to wood / Mustafa Mohamad. (1998) [Student Project] (Unpublished)

Performance of pull out glued-in-rod for different grain angle directions and rod diameters of mengkulang glulam / Wan Nor Nasuha Mohamad. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

CFD analysis / Muhammad Syakir Mohamad Saidi ... [et al.]. (2021) [Student Project] (Submitted)

The prediction of diesel engine NOx emissions using artificial neural network / Mohd Mahadzir Mohammud and Khairil Faizi Mustafa. (2003) ESTEEM Academic Journal, 1: 1. ISSN 2289-4934

A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. (2022) [Student Project] (Submitted)

Experimental investigation of flow behaviour of open channel flow through a linear straight contraction / Muhammad Izhar Firki Mohd Adenan. (2022) [Student Project] (Submitted)

Determination of energy losses in pipe fittings of a flow with variation of reynold number / Muhammad Azim Azran Mohd Ali. (2022) [Student Project] (Submitted)

A case study of pull out characteristics of soil nails along Jalan Baru from Gap to Fraser Hill, Pahang / Siti Norizan Mohd Ali. (2004) [Student Project] (Unpublished)

Jurukur Tanahmas Sdn. Bhd. / Nurulizzah Mohd Amin. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

Regional flow frequency analysis on Peninsular Malaysia using L-moments / Aminuddin Mohd Baki ... [et al.]. (2015) Jurnal Intelek, 9 (1). pp. 63-68. ISSN 2231-7716

Simulation of flow behaviour of open channel flow through a linear straight contraction using computational approach / Muhammad Amir Ashraf Mohd Haziman. (2022) [Student Project] (Submitted)

Students’ performance in soil engineering course via active learning / Farah Wahida Mohd Latib, Noorul Iqhlima Najwa Ismail and Duratul Ain Tholibon. (2021) Gading Journal for Social Sciences, 24 (3). pp. 26-30. ISSN e-ISSN: 2600 - 7568

Analysis of a 3-D finite element model of reinforced concrete (RC) beam upon treatment of cracks / Mohd Zafri Mohd Ridzwan. (2006) [Student Project] (Unpublished)

Design and fabrication of oil palm fruit collector / Mohamad Hafiz Aminuddin Mohd Rozi. (2022) [Student Project] (Submitted)

Failure detection analysis of grid-connected photovoltaic system using an improved comparative based method / Fatin Azirah Mohd Shukor. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Type of corrosion and method of prevention / Fahly Khairy Mohd Zain and Zaidi Ramli. (2002) [Student Project] (Unpublished)

Portable flood barrier / Muhammad Akmal Mohmad Yusop, Najihah Ramli and Qaisara Addlen Shah. (2022) In: Virtual-Melaka International Intellectual Exposition 2022 (VMIIEX 22). Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, pp. 307-308. ISBN 978-967-2846-04-8 (Submitted)

Multi level moving storage rack / Muhamad Hafizudin Muhammad ... [et al.]. (2021) [Student Project] (Submitted)

Influence of hydroxyapatite particle size on the flowability of PLA/HA filament / Nur Munirah Mustaza ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 10. pp. 159-179. ISSN 1823-5514 ; 2550-164X

N

Experimental determination of high-acceleration shock characteristics of industrial marine fenders / David N. V., Adelin Khairina M. S. and Vipin Gopan. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 1. pp. 1-21. ISSN 1823-5514 ; 2550-164X

P

Engineering & Technology: annotated bibliography of UiTM Libraries. (2023) PTAR Annotated Bibliography.

R

Compressive strength and behaviour of full and partial CFRP confined concrete columns / Muhammad Amir Shafiq Rahamad Ali... [et al.]. (2022) ESTEEM Academic Journal, 18. pp. 41-54. ISSN 2289-4934

Design and fabrication of corn peeler / Mohamad Ariff Fikri Rahim. (2022) [Student Project] (Submitted)

Tunable high speed pulse generator for Phase Change Memory (PCM) using 0.13um technology / Munirah Rasin. (2015) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Numerical analysis of embankment on soft soils with different / Rohamezan Rohim. (2003) ESTEEM Academic Journal, 1. ISSN 2289-4934

Hand sanitizer dispenser / Hakimi Roslan ... [et al.]. (2021) [Student Project] (Submitted)

Heavy duty hand truck / Abdul Hadi Rosli ... [et al.]. (2021) [Student Project] (Submitted)

Flexural crack propagation in steel fibre concrete beam / Nur Anisa Athirah Rosli. (2017) ESTEEM Academic Journal, 13. pp. 108-119. ISSN 1675-7939

Hexagon Synergy (M) Sdn Bhd / Ain Fatihah Rudy Fikri. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

S

Artificial neural network sediment transport model for Sungai Bernam / Muhammad Syahreen Sa'adon. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Physical properties of graphene / Mohd Rafal Sahudin ... [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 13. pp. 225-267. ISSN 1823-5514 ; 2550-164X

Influence of alkali treatment on bamboo/coconut husk hybrid fibre polyester composite / Nurul Haiza Sapiee, Nurul Sharifah Aina Mohammad Nizar and Chee Yun Fatt. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 7. pp. 107-124. ISSN 1823-5514 ; 2550-164X

Automated & innovative surface crack detection & length estimation technique for infrastructure inspection work / Syahrul Fithry Senin ... [et al.]. (2019) In: Academic Intellectual International Invention, Innovation & Design Book. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah, p. 159. ISBN 9789670314716

Reliability of jack-in method in assessing pile Bearing capacity / Mozzi Solomon Sensing. (2006) [Student Project] (Unpublished)

Application of composite materials in golf club / Faidzal Sany Shaari and Kamal Asyraf Ramli. (2004) [Student Project] (Unpublished)

Fruit collector / Muhammad Faizuddin Syahir Shahizam ... [et al.]. (2021) [Student Project] (Submitted)

Residual stress measurements on SS316L specimen using selective laser melting and numerical computation software / Micheal Stoschka ... [et al.]. (2023) Journal of Applied Engineering Design & Simulation (JAEDS), 3 (2): 6. pp. 57-68. ISSN 2805-5756

T

Rheological behaviour and rutting resistance of asphalt modified with SBS and nano-silica / Ali Pirhadi Tavandashti and Mehrdad Mirshekarian Babaki. (2024) Journal of Smart Science and Technology, 4 (2): 1. pp. 1-15. ISSN 2785-924X

Assesment of ROM scale with regards to variation in depth at landslide tragedic sites in Selangor/Tengku Firdaus Tuan Lah. (2007) [Student Project] (Submitted)

U

Back analysis of a slope failure by using PLAXIS Code / Syahrul Rozaily Usul. (2004) [Student Project] (Unpublished)

W

Contractual behaviour framework for successful civil engineering projects / Wan Norizan Wan Ismail. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Design and fabrication of cloth folding machine / Wan Nur Amila Wan Mohd Yusoff. (2022) [Student Project] (Submitted)

Y

Tindanan poligon sistem maklumat tanah / Othman Yunus. (1990) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Z

Behaviour of two-way partially prestressing waffle slab incorporated with wire mesh (BRC) under cyclic loading / Ismail Zainal. (1990) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Effect of surcharge pressures and moisture contents on the pipe jacking force / Elbis Shuhaimi Zakaria. (1991) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Slope protection (soil nailing) at SMK Seri Lipis,Kuala Lipis / Fatin Nabilah Zawawi. (2015) [Student Project]

Infra-red Level Detector / Farah Diyana Zolkafli and Nurul Mafizah Mohamad. (2003) [Student Project] (Unpublished)

Development of jig for Coordinate Measuring Machines / Nor Izlan Zulkhiflee. (2017) [Student Project] (Submitted)

This list was generated on Tue Dec 3 09:18:29 2024 UTC.