Items where Subject is "Engineering mathematics. Engineering analysis"

A

Ab Rashid, Zuraini (1996) Enhancement of the scheduling algorithm (software and interfacing development)/ Zuraini Ab Rashid. [Student Project] (Unpublished)

Abd Rashid, Amirul (2016) Nanostructured tungsten trioxide on interdigitated micro-electro-mechanical platform for ethylene gas sensor applications / Amirul Abd Rashid. PhD Thesis , Universiti Teknologi MARA .

Abd. Nasir, Syamsul Aiman UiTM student’s timetable manager for android (UTiMa). [Student Project] (Unpublished)

Abdul Hamid, Abdul Hamid and Adull Manan, Nor Fazli and Ismail, Mohd Fauzi and Abdul Wahab, Abdul Malek and Khalit, Muhammad Ilham (2026) Development of warranty management visualisation for automotive aftermarket with integration of AI. Journal of Mechanical Engineering (JMechE) , 23 (1) : 2 . pp. 19-38. ISSN 1823-5514 ; 2550-164X.

Abdul Rahman, Azam (1991) Computation of primary consolidation settlement based on Boussineq and Westergaard theorems / Adam Abdul Rahman. [Student Project] (Unpublished)

Abdul Wahab, Kamsiah (2009) Application of fuzzy logic to simulation of rainfall in Kerayong River catchment / Kamsiah Abdul Wahab. Masters Thesis , Universiti Teknologi MARA .

Adull Manan, Nor Fazli and Abdul Aziz, Abdul Hakeem and Mahmud, Jamaluddin and Abdullah, Abdul Halim (2018) Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (3) . pp. 123-140. ISSN 18235514.

Ag. Mohamad, Norhayati (2005) Improvement of reinforced concrete design based on BS8110:1997 using computer aided software / Norhayati Ag. Mohamad. [Student Project] (Unpublished)

Ahmad, Rafidah (1999) On the design of microstrip bandpass filters/ Rafidah Ahmad. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ahmad, Yahaya (2002) Recirculating water tunnel / Yahaya Ahmad. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Ahmad Sanizam, Nur Alisya Azreen and Abdul Aziz Azmi, Siti Nur Aqilah and Mohammad Iqbal, Siti Nur Liyana Minimizing makespan of job shop scheduling problem using mixed integer linear programming / Nur Alisya Azreen Ahmad Sanizam, Siti Nur Aqilah Abdul Aziz Azmi and Siti Nur Liyana Mohammad Iqbal. [Student Project] (Unpublished)

Ahmed Al-Azazi, Saleem and Alawag, Aawag Mohsen and Saif, Amin (2026) Algorithmic fairness in AI-driven project management for post-conflict and developing regions: a critical review and framework for context-aware AI. Journal of Sustainable Civil Engineering & Technology (JSCET) , 5 (1) : 3 . pp. 28-41. ISSN 2948-4294.

Ali Azizan, Muhammad Aliff (2017) A study on the effectiveness of 3D software in the architecture design process / Muhammad Aliff Ali Azizan. Masters Thesis , Universiti Teknologi MARA .

Amir Hamzah, Ahmad Razlan (1990) Reanalyis of offshore structure / Ahmad Razlan Amir Hamzah. Advanced Diploma Thesis , Universiti Teknologi MARA (UiTM) .

Amran, Muhammad Badrul Amin (2022) Cost benefit analysis of lighting retrofit of led bulb at Bangunan Ilmuan UiTM Campus Bukit Besi / Muhammad Badrul Amin Amran. [Student Project] (Unpublished)

Andud, Dahia (2012) Effects of joint designs on fracture toughness of the butt welds aluminium alloy 5052 / Dahia Andud. Masters Thesis , Universiti Teknologi MARA .

Arsad, Dinie Zulhusni (2022) Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. [Student Project] (Submitted)

Azam1,, Qummare and Ismail1*, Mohd Azmi and Mazlan2, Nurul Musfirah (2018) Experimental study of Bias Acoustic Liner on nacelle lip-skin/ Qummare Azam ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (2) . pp. 67-77. ISSN 18235514.

Azmi, Muhamad Nurfikri (2018) Simulation of heat removal for air distribution unit with parallel fin using air at velocity of 1 m/s. [Student Project] (Unpublished)

Azmi, Muhamad Nurfikri and Zainal Abidin, Hanafiah (2018) Simulation of heat removal for air distribution unit with parallel fin using air at velocity of 1 m/s: article. pp. 1-3.

B

Baharuddin, Hersaiful Herwan (2004) Analysis of PSSDB wall panel with vertical butt joints in the dryboards / Hersaiful Herwan Baharuddin. [Student Project] Faculty of Civil Engineering. (Unpublished)

Belinda Chong, Chiew Meng and Md Fauzi, Normasni and Isa, Iza Sazanita (2010) Modelling of a level drum process control training system / Belinda Chong Chiew Meng, Normasni Md Fauzi and Iza Sazanita Isa. [Research Report] (Unpublished)

D

Daud, Abu Bakar (2012) Evaluation of internal properties of bamboo particleboard using computerized radiography testing / Abu Bakar Daud. [Student Project] (Unpublished)

E

Ezani, Nur Iman (2022) Design and fabrication of portable cloth rack / Nur Iman Ezani. [Student Project] (Submitted)

F

Fawzi, Noor Abiedah (2006) Development of correlation graph between concrete compressive strength and rebound hammer number / Noor Abiedah Fawzi. [Student Project] Faculty of Civil Engineering, Universiti Teknologi MARA. (Unpublished)

H

Hamedon, Syasya Nadhirah and Johari, Juliana and Ahmat Ruslan, Fazlina (2024) A review on artificial intelligence for autonomous vehicle behavior prediction in mixed traffic environment / Syasya Nadhirah Hamedon, Juliana Johari and Fazlina Ahmat Ruslan. Journal of Electrical and Electronic Systems Research (JEESR) , 25 (1) : 2 . pp. 13-22. ISSN 1985-5389, e-ISSN : 3030-640X.

Hamzah, Faiz Azzhar (2022) The effect of machining parameters on surface integrity of mild steel material using lathe machine / Faiz Azzhar Hamzah. [Student Project] (Submitted)

Harun Anuar, Muhammad Fikri (2022) Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. [Student Project] (Unpublished)

Hashim, Hafizan (2018) Bending collapse and energy absorption of conventional and insert-reinforced closed-hat-section beams / Hafizan Hashim. In: The Doctoral Research Abstracts.. IGS Biannual Publication , 18 (18) . Institute of Graduate Studies, UiTM , Shah Alam .

Hassan, Abdul Hadi (2021) The performance and thermal conductivity assessment of kenaf corequarry dust brick (KCQB) / Abdul Hadi Hassan. Masters Thesis , Universiti Teknologi MARA .

J

Jaafar, Jurina (2015) Grid-based remotely sensed hydrodynamic surface runoff model using emissivity coefficient / Jurina Jaafar. PhD Thesis , Universiti Teknologi MARA .

Jaafar, Mohd Zukri (1993) Integrated computer package for productivity, cost control and schedule control / Mohd Zukri Jaafar. [Student Project] (Unpublished)

Ja’afar, Mohd Zalimi (2000) The effect of the lattice girder on the composite action of the half slab / Mohd Zalimi Ja’afar. [Student Project] (Unpublished)

Jusoh, Nordianah and Ghazali, Noorzalianee and Jamaluddin, Siti Hafawati and Muhamad, Siti Nor Nadrah and Wan Ibrahim, Wan Juliyana and Md. Ali, Jamaludin and Wan Yaacob, Wan Mohd Zulkifle (2017) Volume of hill estimation for engineering earth work / Nordianah Jusoh ... [et al.]. Journal of Computing Research and Innovation (JCRINN) , 2 (1) : 11 . pp. 69-76. ISSN 2600-8793.

K

Khairul Anuar, Khairul Aiman (2025) Experimental identification of nonlinearity in bolted beam structure using force-controlled stepped-sine testing and response-controlled stepped-sine testing. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Khalid, Khairul Bahrein (2005) Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Khairul Bahrein Khalid. Degree Thesis , Universiti Teknologi MARA .

Kumari, Parveen and Sharma, Richa and Chandwani, Jyoti (2025) Empirical analysis of AI adoption for talent acquisition: a study on technological, organisational and demographic determinants / Parveen Kumari, Richa Sharma and Jyoti Chandwani. Asia-Pacific Management Accounting Journal (APMAJ) , 20 (1) : 13 . pp. 373-401. ISSN 2550-1631.

Kusni, Muhammad and Syamsudin, H. and Gunawan, L. and Hadi, Bambang Kismono and Darmanto, Seno and Muflikhun, M. Akhsin and Widiramdhani, Martina (2024) Optimization of composite wing structure with static, buckling, and flutter constraints using the finite element method / Muhammad Kusni ... [et al.]. Journal of Mechanical Engineering (JMechE) , 21 (3) : 16 . pp. 269-295. ISSN 1823-5514 ; 2550-164X.

L

Libasin, Zuraira and Azudin, Ahmad Rashidi and Mazeni, Noor Azizah and Idris, Nur Azimah and Samsudin, Norshuhada (2025) Bridging calculus and engineering practice: an instructional video series by UiTM Cawangan Pulau Pinang educators. In: The Fourth International Competition on Sustainable Education 2025 , 20th August 2025 .

Lohgheswary, N. and Abdul Halim, M. H. and M. Nopiah, Z. and A. Aziz, A. and Zakaria, E. (2018) Developing New Lab Base Teaching Approach for Linear Algebra subject in Engineering Mathematics Courses / N. Lohgheswary ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (3) . pp. 220-232. ISSN 18235514.

Long Mohd Nor Azizi, Wahiddah (2017) Effect of focusing on sizing of side drilled bole (SDH) of different depth using various aperture size of PAUT ultrasonic probe / Wahiddah Long Mohd Nor Azizi. [Student Project] Faculty Of Applied Sciences. (Unpublished)

Luyoh, Joel Laing (2026) FPGA implementation of a co-designed CNN and filtering block for digit sign language recognition. Masters Thesis , Universiti Teknologi MARA (UiTM) .

M

M.Yusop, Hanafi and Ghazali, M.F. and M.Yusof, M.F. and W.Hamat, W.S. (2017) Development of Intelligent Leak Detection System Based on Artificial Pressure Transient Signal Using Integrated Kurtosis-Based Algorithm for Z-Filter Technique (I-Kaz) / Hanafi.M.Yusop...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 4 (4) . pp. 84-102. ISSN 18235514.

Mansor, Muhammad Nazree (2014) The variation of prices in civil engineering works / Muhammad Nazree Mansor. [Student Project] (Unpublished)

Mat Isa, Ridzuan (2018) Fatigue studies on carbon steel piping welded materials and its connections. [Student Project] (Unpublished)

Mat Isa, Ridzuan and Abdul Razak, Khalil (2018) Fatigue studies on carbon steel piping welded materials and its connections: article. pp. 1-5.

Mat Lazim, Rizaki (1997) The study on the structural behaviour of precast prestressed hollow core slab with topping under uniformly distributed load in service condition (using ansys) / Rizaki Mat Lazim. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mat Nasir, Muhammad Naufal Asyraf (2022) Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir. [Student Project] (Unpublished)

Mat Zin, Aridani (2010) Finite Element Analysis of Nitinol stent (application in abdominal aorta) / Aridani Mat Zin. Degree Thesis , Universiti Teknologi MARA .

Megat Zamanhuri, Puteri Zirwatul Nadila (2012) Development of application tool for weld imperfection inspection using MATLAB GUI (Graphical User Interface): digital radiographic image / Puteri Zirwatul Nadila Megat Zamanhuri. Masters Thesis , Universiti Teknologi MARA .

Mohamad Hata, Mohsen (2019) A new protocol of dual deniability encryption techniques based on asymmetric secret sharing method / Mohsen Mohamad Hata. PhD Thesis , Universiti Teknologi MARA .

Mohamadin, Mohammad Isa and Julaihi, Nor Hazizah (2023) Factors influencing the choice of higher education institution and diploma programme among Universiti Teknologi MARA (UiTM) students / Mohammad Isa Mohamadin and Nor Hazizah Julaihi. International Journal Of Service Management And Sustainability , Vol. 8 (No.1) . pp. 1-24. ISSN 2550-156.

Mohamed, Zurina (2003) Error performance in BCH codes / Zurina Mohamed. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Mohamed Shamsudin, Mohamad Sukri (2010) Production improvement through the use quest simulation technique of layout optimization specific on labour optimization / Mohamad Sukri Mohamed Shamsudin. Degree Thesis , Universiti Teknologi MARA .

Mohammad Iqbal, Siti Nur Liyana and Abdul Aziz Azmi, Siti Nur Aqilah and Ahmad Sanizam, Nur Adriana Azween and Abdul Aziz, Nurul Liyana (2023) Minimizing makespan of job shop scheduling problem using mixed integer linear programming. Mathematics Letters , 2 (1) : 10 . pp. 108-114. ISSN eISSN: 2948-3735.

Mohammed, Ahmad Munawir (2000) E-logistic: an information perspective / Ahmad Munawir Mohammed. Masters Thesis , Universiti Teknologi MARA (Kampus Puncak Perdana) .

Mohd Aizam, Muhammad Afiq and Mohamad Hadis, Nor Shahanim and Abdullah, Samihah (2020) IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam ... [et al.]. ESTEEM Academic Journal , 16 (June) : 6 . pp. 59-73. ISSN 2289-4934.

Mohd Andrie, Nur Adriana Auni (2022) Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie. [Student Project] (Submitted)

Mohd Faisal, Muhammad Danial Hakim (2022) Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal. [Student Project] (Unpublished)

Mohd Nasil, Muhammad Thaqif (2022) Portable coin separator / Muhammad Thaqif Mohd Nasil. [Student Project] (Unpublished)

Mohd Rathi, Mohd Razif and Zainal Abidin, Mursyidah and Wasli, Zaidi (2012) To innovate the potential used of arc and oxy-acetylene welding to produce 3 dimensional form as an alternative to foundry work / Mohd Razif Mohd Rathi, Mursyidah Zainal Abidin and Zaidi Wasli. [Research Report] Research Management Institute (RMI). (Unpublished)

Mohd Samsi, Hardiyana (2007) A numerical study on structural behaviour of bonded and unbonded prestressed beams / Hardiyana Mohd Samsi. [Student Project] (Unpublished)

Mohd Shaiful Afzam, Muhammad Luqman Hakim (2022) A computational simulation of foreshore wave at rocky coast landform near Terengganu coastline during monsoon season / Muhammad Luqman Hakim Mohd Shaiful Afzam. [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. [Student Project] (Submitted)

Mohd Yusof, Mohd Hidzham (2008) PC based data logger / Mohd Hidzham Mohd Yusof. [Student Project] (Unpublished)

Mohd Yusof, Nur Farhana (2019) Improved model for blood glucose control using Multi-Parametric Model Predictive Control (MP-MPC) / Nur Farhana Mohd Yusof. PhD Thesis , Universiti Teknologi MARA .

Mohd Zaidi, Muhammad Faizal Hakimi (2021) Reinforced concrete building design project & project based learning (Case Study). [Student Project] (Unpublished)

Muhamad Satar, Nor Jannah (2012) Distributed single mode fiber sensor and fiber Bragg grating for displacement and temperature sensing / Nor Jannah Muhamad Satar. Masters Thesis , Universiti Teknologi MARA .

N

Newman, Aidan and Muhd Sidek, Muhd Norhasri and Mohd Saman, Hamidah and Suliman, Nurul Huda (2021) Effect of utilisation of nano POFA on performance of self-consolidating high-performance concrete (SCHPC). Scientific Research Journal , 18 (2) : 15 . pp. 103-117. ISSN 2289-649X.

Ngang, Raymond (1997) Development of fuzzy logic controller for improving the performance of ward leonard speed system / Raymond Ngang. Degree Thesis , Institut Teknologi MARA (ITM) .

Noor Azman, Sharul Azri and Mohd Rasid, Nur Farzana and Mohamad Sahar, Amirah (2023) Computational fluid dynamics study in multi-microchannels cooling system. Mathematics Letters , 2 (2) : 4 . pp. 42-56. ISSN eISSN: 2948-3735.

Nordin, Muhammad Azizi (2015) Face shape recognition for hairstyle recommendation using MATLAB / Muhammad Azizi Nordin. Degree Thesis , Universiti Teknologi MARA .

O

Osman @ Mohd Nordin, Muhammad Zakiruddin (2022) Miniature drilling machine prototype / Muhammad Zakiruddin Osman @ Mohd Nordin. [Student Project] (Submitted)

Othman, Akbar and Hasan, Mohd Fahrul (2012) Finite element simulation of polymethyl-acrylamid foam-filled aluminum 2024-t4 tube under dynamic axial loading / Akbar Othman and Mohd Fahrul Hasan. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

Othman, Akbar and Hasan, Mohd Fahrul (2012) Simulation of dynamic absorbed energy analysis of multi-cell aluminum 6061-t6 alloy extrusion / Akbar Othman and Mohd Fahrul Hasan. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

R

Rabe, Martin and Kühn, Arno and Dumitrescu, Roman and Mittag, Tobias and Schneider, Marcel and Gausemeier, Jürgen (2018) Impact of Smart Services to Current Value Networks / Martin Rabe ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 1-11. ISSN 18235514.

Ramli, Muhammad Ridzwan (2023) Simulation of multi tip-sail winglet for drag reduction at mach 0.1 / Muhammad Ridzwan Ramli. Masters Thesis , Universiti Teknologi MARA (UiTM) .

Roslan, Nurul Iwani (2007) Assesment on X - bracing system and V - bracing system of steel building / Nurul Iwani Roslan. [Student Project] (Unpublished)

Ruzali, Nur Alia Shahirah (2022) Energy assesment in a single household to increase awareness of energy usage / Nur Alia Shahirah Ruzali. [Student Project] (Submitted)

S

Sahwee, Zulhilmy and Mahmood, Aina Suriani and Abd. Rahman, Nazaruddin and Mohamed Sahari, Khairul Salleh (2018) UAV actuator fault detection through artificial intelligent technique / Zulhilmy Sahwee ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (6) . ISSN 18235514.

Salim, Safyzan (1998) Fuzzy logic controller of an inverted pendulum / Safyzan Salim. Degree Thesis , Institut Teknologi MARA (ITM) .

Salim Nasir, Mohd Agos and Rathi, Sidik and Suhami, Siti Izzati Amni and Abu Bakar, Siti Athirah and Sadikin, Zubaidah and Harun, Nurzalina (2024) Implementing discrete least squares software for real-world data analysis to find velocity. Malaysia Journal of Invention and Innovation , 3 (6) : 2 . pp. 9-18. ISSN 2976-2170.

Salleh, Mohd Akmal (2007) Development of computer aided design of rectangular reinforced concrete column by using Visual Basic 6.0 / Mohd Akmal Salleh. [Student Project] (Unpublished)

Samat, Noorhaliza Hany (2005) Flood inundation mapping using HEC-RAS and ArcView GIS / Noorhaliza Hany Samat. [Student Project] (Unpublished)

Sulaiman, Muhammad Haziq (2018) Integration of statistical process control (SPC) and engineering process control (EPC) in batch process. [Student Project] (Unpublished)

Sulaiman, Muhammad Haziq and Hamzah, Nur Amalina and Abd Karim, Siti Fatma and Ali, Sherif Abdul Bari (2018) Integration of statistical process control (SPC) and engineering process control (EPC) in batch process: article. pp. 1-7.

Syed Adnan, Syed Farid (2019) An analysis of the AAḃ asymmetric encryption scheme on embedded devices for IoT environment / Syed Farid Syed Adnan. PhD Thesis , Universiti Teknologi MARA .

U

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian Anthropometric Data for Automotive Applications / Muhammad Abdulazeez Uba ...[et al.]. Journal of Mechanical Engineering (JMechE) , SI 5 (4) . pp. 68-88. ISSN 18235514.

W

Wan Rodi, Wan Norhishamuddin and Aziz, Fatin (2023) Sitespectrum: a multi-criteria decision support system for real estate site evaluation using AHP. In: Johor Innovation Invention Competition and Symposium 2023.. Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 229-231 . ISBN 978-967-0033-17-4.

Wan Zaki, Wan Muhamad Fahmi (2006) Computer approach using MathCAD for better understanding to the Structural Analysis II (KJC 424) / Wan Muhamad Fahmi Wan Zaki. [Student Project] (Unpublished)

Y

Yakub Kayode, Saheed and Kazeem Alagbe, Gbolagade (2017) An improved RSA cryptosystem based on thread and CRT / Saheed Yakub Kayode and Gbolagade Kazeem Alagbe. e-Academia Journal , 6 (2) . pp. 71-79. ISSN 2289 - 6589.

Yusoff, Fakhrul Hazman and Mohd Yasin, Anita and Osman, Rozianawaty (2005) The effect of slicing jpeg file on the web page download time / Fakhrul Hazman Yusoff, Anita Mohd Yasin and Rozianawaty Osman. Jurnal Intelek , 3 (1) . pp. 1-10. ISSN 2231-7716.

Yusuf, Ahmad Idzwan (2026) Dynamic characterization and optimization of pot bearings in bridges using finite element analysis. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Yuting, Yu (2025) Enhanced active disturbance rejection controller in the unified power quality conditioner for power quality and stability improvement. PhD Thesis , Universiti Teknologi MARA (UiTM) .

Z

Zainal, Syazwani (2006) Characteristic of peri urban traffic / Syazwani Zainal. [Student Project] (Unpublished)

Zakaria, N. J. and Zamzuri, H. and Mohamed Ariff, M. H. and Azmi, M. Z and Hassan, N. (2018) Lane change behaviour recognition using neural entwork / N. J. Zakaria ... [et al.]. Journal of Mechanical Engineering (JMechE) , SI 6 (1) . pp. 1-19. ISSN 18235514.

Zawawi, Nurafiqah (2017) Simulation work on blood glucose control for type 1 diabetes using Modified Hovorka Equations. [Student Project] (Unpublished)

Zawawi, Nurafiqah and Md. Som, Ayub and Mohd Yusof, Nur Farhana Simulation work on blood glucose control for type1 diabetes using Modified Hovorka Equations: article. pp. 1-4.

Zulhaimi, Muhammad Shamin (2018) Modeling of structural deformation of Staff’s Quarters Sekolah Menengah Kebangsaan Ranau subjected to the 2015 Ranau earthquake using Ruaumoko 2D / Muhammad Shamin Zulhaimi. [Student Project] (Unpublished)