Items where Subject is "Finite element method"

A

Stress and thermal analysis on the piston head using finite element analysis (FEA) / Mohd Yusof Ab Razak. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element study of acetabular cup contact region for Total Hip Replacement (THR) / Muhammad Faris Abd Manap ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 2 (1). pp. 71-82. ISSN 1823-5514 ; 2550-164X

Study of dynamic characteristics of CEM-1 Single-layer Printed Circuit Board using Finite Element Method and Experimental Modal Analysis / Ummizulaikha Abd Rahman @ Abd Malik. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Finite element analysis of high subsonic air target drone wing structure (high swept configuration) / Fairul Adzreen Abd Wahab. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

A brief overview on finite element analysis for mechanics of proton exchange membrane fuel cell / Abdul Muhaimin Abdul Aziz ... [et al.]. (2024) Malaysian Journal of Chemical Engineering and Technology (MJCET), 7 (2): 10. pp. 195-204. ISSN 2682-8588

Software development: F.E.A.P finite element analysis program / Ahmad Kamal Abdul Aziz. (1992) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Truss optimization / Razif Abu Samah and Hisam Sanip. (2001) [Student Project] (Unpublished)

Intelligent awning / Armizzi Adam. (2007) [Student Project] (Unpublished)

The investigation of the dynamic behaviour of a complex structure using the wave-based substructuring method / Ahmad Burhani Ahmad Basri. (2009) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Wave-Based Substructuring Method for Dynamic Behaviour Investigation of Solid Meshing Based Finite Element Model of a Structure / Ahmad Burhani Ahmad Basri ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 176-186. ISSN Special Issue Advances in Engineering and Technology Vol 5 (Submitted)

Stress and thermal analysis on the piston head using finite element analysis (FEA) / Mohd Hairul Asnawee. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Investigation of satellite structures under quasi-static acceleration loading / Adli Azeman. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Structural analysis of an ergonomic motorcycle test rig using finite element analysis (FEA) / Muhammad Firdaus Azhar. (2014) (Unpublished)

B

Heat Analysis in Friction Stir Welding Using Finite Element Method / Mohd Saiful Bahari... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 174-188. ISSN 18235514

Modelling and simulation of cyclic nanoindentation for Y-TZP ceramic / S. K. H. Baharudin and J. Saedon. (2024) Journal of Applied Engineering Design & Simulation (JAEDS), 4 (2): 4. pp. 34-44. ISSN 2805-5756

F

Symbolic programming of finite element equation solving for plane truss problem / Syahrul Fithry Senin. (2009) ESTEEM Academic Journal, 5 (1). pp. 113-124. ISSN 1675-7939

H

Evaluating the non-linear static and dynamic stiffness of rail pad using finite element method / Mohamad Hazman Halim. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Bending collapse of closed-hat-section beams. Part I: Development and validation of finite element models / Hafizan Hashim...[et al.]. (2017) Journal of Mechanical Engineering, SI 2 (1). pp. 57-69. ISSN 1823-5514

Static Stability Determination Of An Exhaust Stack Structure Using Finite Element Analysis / Kamarul Nizam Hassan ... [et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (5). pp. 153-166. ISSN 18235514

The reconciled finite element model of riveted joints structure for crash analysis / Nor Munirah Hassin. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

I

Finite element method (FEM) analysis on coupled process of welding to forming and forming to welding / Dendi Prajadhiana Ishak. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Behaviour of thin walled structures subjected to torsion / Fakhrurazi Ismail. (1994) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element investigation on the structural response and performance of hybrid glulam cold-formed bolted connections roof trusses / Sarina Ismail. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

J

Finite element analysis of shear wall / Irwan J Ibrahim. (2006) [Student Project] (Submitted)

Modeling and switching simulation tool of SiC-GTO / Mohd Shawal Jadin, Muhamad Zahim Sujod and Raja Mohd Taufika Raja Ismail. (2008) Journal of Electrical and Electronic Systems and Research (JEESR), 1: 7. pp. 65-69. ISSN 1985-5389

Development of optimum range of joint design for carbon steel by small wire submerged arc welding process / Saiful Yazan Jamaludin. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Application of Finite Difference Method (FDM) and Finite Element Method (FEM) in solving heat problem / Syaza Nurnazihah Jumahat @ Jamak. (2023) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Determination dynamic characteristic of simple beam using experimental modal analysis and finite element analysis / Mohd Azra'ie Jusop. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

L

Simulation of laser and hybrid laser welding using SYSWELD / Robert Ngendang Lidam. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

M

Design simulation and finite element analysis of piezoresistive microcantilever for human stress measurement / Nina Korlina Madzhi ...[et al.]. (2009) Journal of Electrical and Electronic Systems Research (JEESR), 2: 4. ISSN 1985-5389

Simulation and failure analysis of fibre-reinforced composite laminates under various load and boundary conditions / Mohamad Mali. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on resistance spot welding by using fem simulation method and experimental investigation / Shahrul Hisyam Marwan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element analysis of PSSDB wall panel with door opening on the effect of vertical butt joints in the dry board / Azrul Md Din. (2004) [Student Project] (Unpublished)

Deformation and stability analysis of a cut slope / Masyitah Md Nujid. (2012) Jurnal Intelek, 7 (1). pp. 9-14. ISSN 2682-9223

Evaluating the structural response of ceramic-metal laminate under ballistic impact / Mohd Suhairil Meon, Muhammad Qmie Delfrin and Juri Saedon. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 6. pp. 85-105. ISSN 1823-5514 ; 2550-164X

Progressive damage model of carbon-fiber reinforced polymer laminates under low-velocity impact loading / Mohd Suhairil Meon, Muhammad Faizul Iqmal Mordi and Jamaluddin Mahmud. (2024) Journal of Mechanical Engineering (JMechE), 13 (1): 12. pp. 215-234. ISSN 1823-5514 ; 2550-164X

Stuctural analysis of lead frame design of dual row quad flat no lead package (QFN) using ansys / Nur Atiqah Mohamad Maksom. (2012) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Stuctural analysis of lead frame design of dual row quad flat no lead package (QFN) using ansys: article / Nur Atiqah Mohamad Maksom. (2012) pp. 1-7.

Dynamic characterization of laminated fiber composites using finite element method / Mohamad Asyraf Hj. Mohamed Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Implementation of finite element program for two-dimensional plane strain analysis / Abdul Rahman Mohammad Yusuf. (1992) [Student Project] (Unpublished)

Finite element analysis of Nitinol stent (application in thoracic aorta) / Ahmad Faizul Fahmi Mohd. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

The buckling behaviour of steel plate as a column / Rosli Mohd Amin. (1997) [Student Project] (Unpublished)

Mechanics of Posterior Stabilized Total Knee Arthroplasty During Daily Activities in Relation to Prosthesis Condylar and Post-cam Design: A Finite Element Study / Mohd Afzan Mohd Anuar and Mitsugu Todo. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 211-228. ISSN 18235514

Design and development of high flexion total knee replacement (TKR) using finite element analysis (FEA) / Iffa Mohd Arrif. (2024) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element analysis of buckling behaviour of profiled steel sheet wall panel with window and door opening / Izrul Fizal Mohd Bakri. (2001) Degree thesis, thesis, Universiti Teknologi MARA.

Dining establishment recommendation system using machine learning / Muhammad Hazwan Mohd Hazhar. (2024) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Finite element modelling for the dynamic behaviour analysis of a structure with Hi-Lok fasteners / Muhammad Syafiq Aiman Mohd Kahar ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 14. pp. 231-246. ISSN 1823-5514 ; 2550-164X

An analysis of a 3-D finite element model of reinforced concrete (RC) beam upon treament of cracks / Mohd Zafri Mohd Ridzwan. (2006) [Student Project] (Submitted)

Finite element analysis of a 20 structural frame of a wing box test stano / Siti Syahioah Moho Rum. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Stress analysis of the piston due to pressure using finite element analysis (FEA) software / Mohd. Adami Muda. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

N

Design modification and finite element analysis of stainless steel 316L locking compression plates for mid-transverse fractures / Muhammad Naufal Nazeri ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 13 (1): 14. pp. 257-270. ISSN 1823-5514 ; 2550-164X

Numerical simulation of failure prediction on composite laminates with various cutout shapes under uniaxial tension and compression / Nurdalilah Noordin. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element method (FEM) approach towards composite material / Ahmad Shehan Nordin. (2002) Degree thesis, thesis, Universtiti Teknologi MARA (UiTM).

O

Finite element modelling and updating for the dynamic behaviour of a structure with bolted joints / Rohaizat Omar. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite Element Modelling and Updating for Bolted Lap Joints / Rohaizat Omar...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 202-222. ISSN 18235514

Finite element simulation of polymethyl-acrylamid foam-filled aluminum 2024-t4 tube under dynamic axial loading / Akbar Othman and Mohd Fahrul Hasan. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Finite element simulation of square and circular polystyrene foam filled subjected to transverse quasi-static loading / Akbar Othman and. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Simulation of dynamic absorbed energy analysis of multi-cell aluminum 6061-t6 alloy extrusion / Akbar Othman and Mohd Fahrul Hasan. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Finite element simulation modeling of axial dynamic energy absorption on conical titanium alloy / Akbar Othman and Al Emran Ismail. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

R

First ply failure analysis on symmetric laminate / Mohd Basri Rasli. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element analysis of piston crown for a diesel engine / Arif Akmal Rozman. (2024) [Student Project] (Unpublished)

S

Robot arm imitating human upper arm: the design and stress analysis / M.S.I.M Sabari and R.L.A. Shauri. (2022) Journal of Electrical and Electronic Systems Research (JEESR), 20: 16. pp. 113-119. ISSN 1985-5389

Finite element analysis of proximal femur using Charnley Elite type stem / Muhamad Zaidi Salim. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Finite element simulation of rotary swaging process of tube-shaped workpieces / Renganathan Sekar ...[et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 10-19. ISSN 18235514

Modeling of bolt behavior using finite element / Syahrul Fithry Senin and Jumatirah Mohd Alias. (2007) ESTEEM Academic Journal, 3. pp. 113-119. ISSN 1675-7939

Investigation of stresses on a flat plate with a hole using experimental techniques and comparing the results using algor finite element programme / Zulkifi Sharudin, Shahrul Nizar Md. Salleh and Suriyati Supono. (1997) [Student Project] (Unpublished)

Epoxy-UHMWPE acetabular cup performance based on finite element study / Solehuddin Shuib ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 117-140. ISSN 18235514

Analysis of thin - walled frame structure / Rahman Slamat. (1996) [Student Project] (Unpublished)

Tensile and bending analysis of simplified 3D woven fabric modelled with finite element analysis / Farah Amira Sulaiman, Suzaini Abd Ghani and Mohamad Faizul Yahya. (2022) Scientific Research Journal, 19 (1). pp. 15-27. ISSN 2289-649X

U

Simplified woven fabric geometry for tensile and bending analysis / Ungku Nur Ainaa Ungku Mohd Aziz, Suzaini Abdul Ghani and Mohamad Faizul Yahya. (2022) Scientific Research Journal, 19 (1). pp. 29-39. ISSN 2289-649X

W

Indirect scheme for estimating rotational frequency response function and improving frequency-based substructure coupling / Wan Imaan Izhan Wan Iskandar Mirza. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Y

Optimization of spot weld joining parameters for dissimilar plate materials through finite element model updating and response surface methodology / R. M. Yaacob ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 13 (1): 8. pp. 135-156. ISSN 1823-5514 ; 2550-164X

Hyperelastic and elastic-plastic approaches for modelling uniaxial tensile performance of woven fabrics / Yahya, M.F. and Chen, X. (2010) Scientific Research Journal, 7 (2). pp. 31-55. ISSN 1675-7009

Experimental and Finite Element Analysis of Laser Stitch Welded Structure / Mohd Azmi Yunus ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 155-162. ISSN 18235514

Determination of dynamic characteristic of helical gear using finite element analysis and modal testing / Mohd Izzuddin Yusof. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Z

Optimizing the magnetic core structure of a multi-stack Switched Reluctance (SR) motor using finite-element modeling / Nurul Nadia Zoid. (2013) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Optimizing the magnetic core structure of a multi-stack Switched Reluctance (SR) motor using finite-element modeling: article / Nurul Nadia Zoid. (2013) pp. 1-5.

Failure analysis of boron/glass hybrid composite laminates with various cutouts shapes and sizes under biaxial tension / Muhammad Amir Azhan Zulkifli. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).