Items where Subject is "Engineering mathematics. Engineering analysis"

Article

Adull Manan, Nor Fazli and Abdul Aziz, Abdul Hakeem and Mahmud, Jamaluddin and Abdullah, Abdul Halim (2018) Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 123-140. ISSN 18235514

Azam1,, Qummare and Ismail1*, Mohd Azmi and Mazlan2, Nurul Musfirah (2018) Experimental study of Bias Acoustic Liner on nacelle lip-skin/ Qummare Azam ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 67-77. ISSN 18235514

Azmi, Muhamad Nurfikri and Zainal Abidin, Hanafiah (2018) Simulation of heat removal for air distribution unit with parallel fin using air at velocity of 1 m/s: article. (2018) pp. 1-3.

Hamedon, Syasya Nadhirah and Johari, Juliana and Ahmat Ruslan, Fazlina (2024) A review on artificial intelligence for autonomous vehicle behavior prediction in mixed traffic environment / Syasya Nadhirah Hamedon, Juliana Johari and Fazlina Ahmat Ruslan. (2024) Journal of Electrical and Electronic Systems Research (JEESR), 25 (1): 2. pp. 13-22. ISSN 1985-5389, e-ISSN : 3030-640X

Jusoh, Nordianah and Ghazali, Noorzalianee and Jamaluddin, Siti Hafawati and Muhamad, Siti Nor Nadrah and Wan Ibrahim, Wan Juliyana and Md. Ali, Jamaludin and Wan Yaacob, Wan Mohd Zulkifle (2017) Volume of hill estimation for engineering earth work / Nordianah Jusoh ... [et al.]. (2017) Journal of Computing Research and Innovation (JCRINN), 2 (1): 11. pp. 69-76. ISSN 2600-8793

Kumari, Parveen and Sharma, Richa and Chandwani, Jyoti (2025) Empirical analysis of AI adoption for talent acquisition: a study on technological, organisational and demographic determinants / Parveen Kumari, Richa Sharma and Jyoti Chandwani. (2025) Asia-Pacific Management Accounting Journal (APMAJ), 20 (1): 13. pp. 373-401. ISSN 2550-1631

Kusni, Muhammad and Syamsudin, H. and Gunawan, L. and Hadi, Bambang Kismono and Darmanto, Seno and Muflikhun, M. Akhsin and Widiramdhani, Martina (2024) Optimization of composite wing structure with static, buckling, and flutter constraints using the finite element method / Muhammad Kusni ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 16. pp. 269-295. ISSN 1823-5514 ; 2550-164X

Lohgheswary, N. and Abdul Halim, M. H. and M. Nopiah, Z. and A. Aziz, A. and Zakaria, E. (2018) Developing New Lab Base Teaching Approach for Linear Algebra subject in Engineering Mathematics Courses / N. Lohgheswary ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 220-232. ISSN 18235514

M.Yusop, Hanafi and Ghazali, M.F. and M.Yusof, M.F. and W.Hamat, W.S. (2017) Development of Intelligent Leak Detection System Based on Artificial Pressure Transient Signal Using Integrated Kurtosis-Based Algorithm for Z-Filter Technique (I-Kaz) / Hanafi.M.Yusop...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 84-102. ISSN 18235514

Mat Isa, Ridzuan and Abdul Razak, Khalil (2018) Fatigue studies on carbon steel piping welded materials and its connections: article. (2018) pp. 1-5.

Mohamadin, Mohammad Isa and Julaihi, Nor Hazizah (2023) Factors influencing the choice of higher education institution and diploma programme among Universiti Teknologi MARA (UiTM) students / Mohammad Isa Mohamadin and Nor Hazizah Julaihi. (2023) International Journal Of Service Management And Sustainability, Vol. 8 (No.1). pp. 1-24. ISSN 2550-156

Mohd Aizam, Muhammad Afiq and Mohamad Hadis, Nor Shahanim and Abdullah, Samihah (2020) IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam ... [et al.]. (2020) ESTEEM Academic Journal, 16 (June): 6. pp. 59-73. ISSN 2289-4934

Newman, Aidan and Muhd Sidek, Muhd Norhasri and Mohd Saman, Hamidah and Suliman, Nurul Huda (2021) Effect of utilisation of nano POFA on performance of self-consolidating high-performance concrete (SCHPC) / Nuradila Izzaty Halim …[et al.]. (2021) Scientific Research Journal, 18 (2): 15. pp. 103-117. ISSN 2289-649X

Rabe, Martin and Kühn, Arno and Dumitrescu, Roman and Mittag, Tobias and Schneider, Marcel and Gausemeier, Jürgen (2018) Impact of Smart Services to Current Value Networks / Martin Rabe ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 1-11. ISSN 18235514

Sahwee, Zulhilmy and Mahmood, Aina Suriani and Abd. Rahman, Nazaruddin and Mohamed Sahari, Khairul Salleh (2018) UAV actuator fault detection through artificial intelligent technique / Zulhilmy Sahwee ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). ISSN 18235514

Sulaiman, Muhammad Haziq and Hamzah, Nur Amalina and Abd Karim, Siti Fatma and Ali, Sherif Abdul Bari (2018) Integration of statistical process control (SPC) and engineering process control (EPC) in batch process: article. (2018) pp. 1-7.

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian Anthropometric Data for Automotive Applications / Muhammad Abdulazeez Uba ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (4). pp. 68-88. ISSN 18235514

Yakub Kayode, Saheed and Kazeem Alagbe, Gbolagade (2017) An improved RSA cryptosystem based on thread and CRT / Saheed Yakub Kayode and Gbolagade Kazeem Alagbe. (2017) e-Academia Journal, 6 (2). pp. 71-79. ISSN 2289 - 6589

Yusoff, Fakhrul Hazman and Mohd Yasin, Anita and Osman, Rozianawaty (2005) The effect of slicing jpeg file on the web page download time / Fakhrul Hazman Yusoff, Anita Mohd Yasin and Rozianawaty Osman. (2005) Jurnal Intelek, 3 (1). pp. 1-10. ISSN 2231-7716

Zakaria, N. J. and Zamzuri, H. and Mohamed Ariff, M. H. and Azmi, M. Z and Hassan, N. (2018) Lane change behaviour recognition using neural entwork / N. J. Zakaria ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 1-19. ISSN 18235514

Zawawi, Nurafiqah and Md. Som, Ayub and Mohd Yusof, Nur Farhana Simulation work on blood glucose control for type1 diabetes using Modified Hovorka Equations: article. pp. 1-4.

Book Section

Hashim, Hafizan (2018) Bending collapse and energy absorption of conventional and insert-reinforced closed-hat-section beams / Hafizan Hashim. (2018) In: The Doctoral Research Abstracts. IGS Biannual Publication, 18 (18). Institute of Graduate Studies, UiTM, Shah Alam.

Conference or Workshop Item

Libasin, Zuraira and Azudin, Ahmad Rashidi and Mazeni, Noor Azizah and Idris, Nur Azimah and Samsudin, Norshuhada (2025) Bridging calculus and engineering practice: an instructional video series by UiTM Cawangan Pulau Pinang educators. (2025) In: The Fourth International Competition on Sustainable Education 2025, 20th August 2025.

Othman, Akbar and Hasan, Mohd Fahrul (2012) Finite element simulation of polymethyl-acrylamid foam-filled aluminum 2024-t4 tube under dynamic axial loading / Akbar Othman and Mohd Fahrul Hasan. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Othman, Akbar and Hasan, Mohd Fahrul (2012) Simulation of dynamic absorbed energy analysis of multi-cell aluminum 6061-t6 alloy extrusion / Akbar Othman and Mohd Fahrul Hasan. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Thesis

Abd Rashid, Amirul (2016) Nanostructured tungsten trioxide on interdigitated micro-electro-mechanical platform for ethylene gas sensor applications / Amirul Abd Rashid. (2016) PhD thesis, thesis, Universiti Teknologi MARA.

Abdul Wahab, Kamsiah (2009) Application of fuzzy logic to simulation of rainfall in Kerayong River catchment / Kamsiah Abdul Wahab. (2009) Masters thesis, thesis, Universiti Teknologi MARA.

Ahmad, Rafidah (1999) On the design of microstrip bandpass filters/ Rafidah Ahmad. (1999) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ahmad, Yahaya (2002) Recirculating water tunnel / Yahaya Ahmad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Ali Azizan, Muhammad Aliff (2017) A study on the effectiveness of 3D software in the architecture design process / Muhammad Aliff Ali Azizan. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Amir Hamzah, Ahmad Razlan (1990) Reanalyis of offshore structure / Ahmad Razlan Amir Hamzah. (1990) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Andud, Dahia (2012) Effects of joint designs on fracture toughness of the butt welds aluminium alloy 5052 / Dahia Andud. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Hassan, Abdul Hadi (2021) The performance and thermal conductivity assessment of kenaf corequarry dust brick (KCQB) / Abdul Hadi Hassan. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Jaafar, Jurina (2015) Grid-based remotely sensed hydrodynamic surface runoff model using emissivity coefficient / Jurina Jaafar. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Khalid, Khairul Bahrein (2005) Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Khairul Bahrein Khalid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Mat Lazim, Rizaki (1997) The study on the structural behaviour of precast prestressed hollow core slab with topping under uniformly distributed load in service condition (using ansys) / Rizaki Mat Lazim. (1997) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mat Zin, Aridani (2010) Finite Element Analysis of Nitinol stent (application in abdominal aorta) / Aridani Mat Zin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Megat Zamanhuri, Puteri Zirwatul Nadila (2012) Development of application tool for weld imperfection inspection using MATLAB GUI (Graphical User Interface): digital radiographic image / Puteri Zirwatul Nadila Megat Zamanhuri. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Mohamad Hata, Mohsen (2019) A new protocol of dual deniability encryption techniques based on asymmetric secret sharing method / Mohsen Mohamad Hata. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Mohamed, Zurina (2003) Error performance in BCH codes / Zurina Mohamed. (2003) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamed Shamsudin, Mohamad Sukri (2010) Production improvement through the use quest simulation technique of layout optimization specific on labour optimization / Mohamad Sukri Mohamed Shamsudin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Mohammed, Ahmad Munawir (2000) E-logistic: an information perspective / Ahmad Munawir Mohammed. (2000) Masters thesis, thesis, Universiti Teknologi MARA (Kampus Puncak Perdana).

Mohd Yusof, Nur Farhana (2019) Improved model for blood glucose control using Multi-Parametric Model Predictive Control (MP-MPC) / Nur Farhana Mohd Yusof. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Muhamad Satar, Nor Jannah (2012) Distributed single mode fiber sensor and fiber Bragg grating for displacement and temperature sensing / Nor Jannah Muhamad Satar. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

Ngang, Raymond (1997) Development of fuzzy logic controller for improving the performance of ward leonard speed system / Raymond Ngang. (1997) Degree thesis, thesis, Institut Teknologi MARA (ITM).

Nordin, Muhammad Azizi (2015) Face shape recognition for hairstyle recommendation using MATLAB / Muhammad Azizi Nordin. (2015) Degree thesis, thesis, Universiti Teknologi MARA.

Ramli, Muhammad Ridzwan (2023) Simulation of multi tip-sail winglet for drag reduction at mach 0.1 / Muhammad Ridzwan Ramli. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Salim, Safyzan (1998) Fuzzy logic controller of an inverted pendulum / Safyzan Salim. (1998) Degree thesis, thesis, Institut Teknologi MARA (ITM).

Syed Adnan, Syed Farid (2019) An analysis of the AAḃ asymmetric encryption scheme on embedded devices for IoT environment / Syed Farid Syed Adnan. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Yuting, Yu (2025) Enhanced active disturbance rejection controller in the unified power quality conditioner for power quality and stability improvement. (2025) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Ab Rashid, Zuraini (1996) Enhancement of the scheduling algorithm (software and interfacing development)/ Zuraini Ab Rashid. (1996) [Student Project] (Unpublished)

Abd. Nasir, Syamsul Aiman UiTM student’s timetable manager for android (UTiMa). [Student Project] (Unpublished)

Abdul Rahman, Azam (1991) Computation of primary consolidation settlement based on Boussineq and Westergaard theorems / Adam Abdul Rahman. (1991) [Student Project] (Unpublished)

Ag. Mohamad, Norhayati (2005) Improvement of reinforced concrete design based on BS8110:1997 using computer aided software / Norhayati Ag. Mohamad. (2005) [Student Project] (Unpublished)

Amran, Muhammad Badrul Amin (2022) Cost benefit analysis of lighting retrofit of led bulb at Bangunan Ilmuan UiTM Campus Bukit Besi / Muhammad Badrul Amin Amran. (2022) [Student Project] (Unpublished)

Arsad, Dinie Zulhusni (2022) Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. (2022) [Student Project] (Submitted)

Azmi, Muhamad Nurfikri (2018) Simulation of heat removal for air distribution unit with parallel fin using air at velocity of 1 m/s. (2018) [Student Project] (Unpublished)

Baharuddin, Hersaiful Herwan (2004) Analysis of PSSDB wall panel with vertical butt joints in the dryboards / Hersaiful Herwan Baharuddin. (2004) [Student Project] (Unpublished)

Daud, Abu Bakar (2012) Evaluation of internal properties of bamboo particleboard using computerized radiography testing / Abu Bakar Daud. (2012) [Student Project] (Unpublished)

Ezani, Nur Iman (2022) Design and fabrication of portable cloth rack / Nur Iman Ezani. (2022) [Student Project] (Submitted)

Fawzi, Noor Abiedah (2006) Development of correlation graph between concrete compressive strength and rebound hammer number / Noor Abiedah Fawzi. (2006) [Student Project] (Unpublished)

Hamzah, Faiz Azzhar (2022) The effect of machining parameters on surface integrity of mild steel material using lathe machine / Faiz Azzhar Hamzah. (2022) [Student Project] (Submitted)

Harun Anuar, Muhammad Fikri (2022) Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. (2022) [Student Project] (Unpublished)

Jaafar, Mohd Zukri (1993) Integrated computer package for productivity, cost control and schedule control / Mohd Zukri Jaafar. (1993) [Student Project] (Unpublished)

Ja’afar, Mohd Zalimi (2000) The effect of the lattice girder on the composite action of the half slab / Mohd Zalimi Ja’afar. (2000) [Student Project] (Unpublished)

Long Mohd Nor Azizi, Wahiddah (2017) Effect of focusing on sizing of side drilled bole (SDH) of different depth using various aperture size of PAUT ultrasonic probe / Wahiddah Long Mohd Nor Azizi. (2017) [Student Project] (Unpublished)

Mansor, Muhammad Nazree (2014) The variation of prices in civil engineering works / Muhammad Nazree Mansor. (2014) [Student Project] (Unpublished)

Mat Isa, Ridzuan (2018) Fatigue studies on carbon steel piping welded materials and its connections. (2018) [Student Project] (Unpublished)

Mat Nasir, Muhammad Naufal Asyraf (2022) Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir. (2022) [Student Project] (Unpublished)

Mohd Andrie, Nur Adriana Auni (2022) Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie. (2022) [Student Project] (Submitted)

Mohd Faisal, Muhammad Danial Hakim (2022) Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal. (2022) [Student Project] (Unpublished)

Mohd Nasil, Muhammad Thaqif (2022) Portable coin separator / Muhammad Thaqif Mohd Nasil. (2022) [Student Project] (Unpublished)

Mohd Samsi, Hardiyana (2007) A numerical study on structural behaviour of bonded and unbonded prestressed beams / Hardiyana Mohd Samsi. (2007) [Student Project] (Unpublished)

Mohd Shaiful Afzam, Muhammad Luqman Hakim (2022) A computational simulation of foreshore wave at rocky coast landform near Terengganu coastline during monsoon season / Muhammad Luqman Hakim Mohd Shaiful Afzam. (2022) [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

Mohd Yusof, Mohd Hidzham (2008) PC based data logger / Mohd Hidzham Mohd Yusof. (2008) [Student Project] (Unpublished)

Osman @ Mohd Nordin, Muhammad Zakiruddin (2022) Miniature drilling machine prototype / Muhammad Zakiruddin Osman @ Mohd Nordin. (2022) [Student Project] (Submitted)

Roslan, Nurul Iwani (2007) Assesment on X - bracing system and V - bracing system of steel building / Nurul Iwani Roslan. (2007) [Student Project] (Unpublished)

Ruzali, Nur Alia Shahirah (2022) Energy assesment in a single household to increase awareness of energy usage / Nur Alia Shahirah Ruzali. (2022) [Student Project] (Submitted)

Salleh, Mohd Akmal (2007) Development of computer aided design of rectangular reinforced concrete column by using Visual Basic 6.0 / Mohd Akmal Salleh. (2007) [Student Project] (Unpublished)

Samat, Noorhaliza Hany (2005) Flood inundation mapping using HEC-RAS and ArcView GIS / Noorhaliza Hany Samat. (2005) [Student Project] (Unpublished)

Sulaiman, Muhammad Haziq (2018) Integration of statistical process control (SPC) and engineering process control (EPC) in batch process. (2018) [Student Project] (Unpublished)

Wan Zaki, Wan Muhamad Fahmi (2006) Computer approach using MathCAD for better understanding to the Structural Analysis II (KJC 424) / Wan Muhamad Fahmi Wan Zaki. (2006) [Student Project] (Unpublished)

Zainal, Syazwani (2006) Characteristic of peri urban traffic / Syazwani Zainal. (2006) [Student Project] (Unpublished)

Zawawi, Nurafiqah (2017) Simulation work on blood glucose control for type 1 diabetes using Modified Hovorka Equations. (2017) [Student Project] (Unpublished)

Zulhaimi, Muhammad Shamin (2018) Modeling of structural deformation of Staff’s Quarters Sekolah Menengah Kebangsaan Ranau subjected to the 2015 Ranau earthquake using Ruaumoko 2D / Muhammad Shamin Zulhaimi. (2018) [Student Project] (Unpublished)

Research Reports

Belinda Chong, Chiew Meng and Md Fauzi, Normasni and Isa, Iza Sazanita (2010) Modelling of a level drum process control training system / Belinda Chong Chiew Meng, Normasni Md Fauzi and Iza Sazanita Isa. (2010) [Research Reports] (Unpublished)

Mohd Rathi, Mohd Razif and Zainal Abidin, Mursyidah and Wasli, Zaidi (2012) To innovate the potential used of arc and oxy-acetylene welding to produce 3 dimensional form as an alternative to foundry work / Mohd Razif Mohd Rathi, Mursyidah Zainal Abidin and Zaidi Wasli. (2012) [Research Reports] (Unpublished)