Items where Subject is "Engineering design"

Group by: Creators | Item Type
Jump to: A | J | K | M | N | S | Y | Z
Number of items at this level: 18.

A

(2006) The stability of bituminous mix design using various types of fillers / Ahmad Fadhley Abdul Majid. [Student Project] (Submitted)

(2012) A conceptual overview of ergonomics in construction industry / Asniza Hamimi Abdul Tharim ... [et al.]. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

(2010) A study on moisture induced damage and rutting of hot mix asphalt / Juraidah Ahmad. PhD thesis, thesis, Universiti Teknologi MARA.

(2015) Designers approach in managing legal design risks in Malaysia / Zul Zakiyuddin Ahmad Rashid, Hamimah Adnan and Norazian Mohd Yusuwan. Built Environment Journal (BEJ), 12 (1). pp. 34-49. ISSN 1675-5022

(2017) De' Globe Consult: cadangan membina rumah banglo 2 tingkat di Lot 10, Jalan Padi Mahsuri 2/6, Bandar Barunuda, 81200, Johor Bahru / Ahmad Amsyar Aizulkamal ... [et al.]. [Student Project] (Unpublished)

(2006) Structure analysis of cable stayed footbridge (simulation and modelling) design and calculation / Edid Azhar Atan. [Student Project] (Unpublished)

J

(2003) Layout design for mechanical workshop in the new campus / Aryanty Jaafar and Dayang Esmayati Abu Seman. [Student Project] (Unpublished)

(2019) Analysis of eco-efficiency performance of reinforced concrete single storey residential house in promoting sustainable structure / Omar Othman Jasni. [Student Project] (Unpublished)

K

(2012) Persepsi kakitangan awam terhadap persekitaran pejabat (kajian kes : lima belas Pejabat Kerajaan Negeri Sembilan) / Noorazlina Kamarulzaman dan Alia Abdullah Saleh. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

M

(2013) Effect of pulping conditions and beating on Semantan bamboo pulp and paper properties / Nurul Husna Mohd Hassan. In: The Doctoral Research Abstracts. IPSis Biannual Publication, 4 (4). Institute of Research, Development and Commercialization (IRDC), Shah Alam.

N

(2018) Effect of Visible Light Transmittance (VLT) and ventilation modes to Vehicle Indoor Air Quality (VIAQ) / Noor Hafiz Noordin. Masters thesis, thesis, Universiti Teknologi MARA.

(2016) A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.]. Compendium of Oral Science (COS), 3. pp. 1-8. ISSN 2489-1102; 2637-0611

S

(2007) Modeling of bolt behavior using finite element / Syahrul Fithry Senin and Jumatirah Mohd Alias. Esteem Academic Journal, 7. pp. 113-119. ISSN 1675-7939

(2016) Usability evaluation via accessibility design / Siti Norsazlina Haron ... [et al.]. Malaysian Journal of Sustainable Environment (MySE), 1. pp. 1-11. ISSN 0128-326X

(2006) Standard JKR practice in RC Bridge Abutment Design / Mohd Sofiyan Sulaiman. [Student Project] (Unpublished)

Y

(2016) Evaluation of Rayleigh damping coefficients for laminated rubber bearing using modal analysis / Ahmad Idzwan Yusuf. Masters thesis, thesis, Universiti Teknologi MARA.

Z

(2017) Job Hazard Analysis for upgrading Jalan Abu Bakar – Jalan Skudai, Johor Bahru, Johor Darul Takzim / Nurain Shafiqah Zainal. Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

(2018) Enhancement of durability and engineering performance of lightweight foamed concrete reinforced with alkali-treated coir fiber / Siti Nurain bZainal Afandi and Md Azree Othuman Mydin. In: 3rd Undergraduate Seminar on Built Environment and Technology 2018 (USBET2018), September 2018, Universiti Teknologi Mara Perak Branch.

This list was generated on Sun May 22 14:54:38 2022 UTC.