A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.]

Nasruddin, Mohd Faiz and Theocharospoulos, Antonios and Ray, Noel and Burke, Francis M (2016) A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.]. Compendium of Oral Science (COS), 3 (1): 1. pp. 1-8. ISSN 2489-1102; 2637-0611
Abstract

Fitting accuracy of dental prostheses is essential for clinical success. An ideal marginal and internal fit will minimize plaque accumulation, gingival irritation, cement dissolution and micro leakage as well as enhancing the mechanical behaviour of a fixed partial denture (FPD) (1). Unfortunately, there is disagreement about acceptable marginal and internal fit discrepancies of FPD’s (2) from 75-200μm. The range of discrepancies stated (75-200µm) does not jeopardize the clinical performance of the restoration. However, McLean and von Fraunhofer (3) reported that marginal gaps of less than120μm are clinically acceptable while gaps of less than 80μm are difficult to detect clinically.

Item Details
Edit Item
Edit Item
Downloads & Files
[thumbnail of 48942.pdf]
Text
48942.pdf
Download (991kB)
Indexing & Metrics