Items where Subject is "Computer-aided design. CAD/CAM systems"

A

Design and fabrication of variable temperature sensor on cast iron at tilting furnace / Muhammad Zuhrilhakim Ab Maulub. (2022) [Student Project] (Submitted)

Design and fabricate a temperature sensor on aluminium using tilting furnace / Muhammad Fikhran Hamsyi Azmi. (2022) [Student Project] (Unpublished)

Design and fabrication of foldable house stairs / Muhammad Al Ikram Akmal. (2022) [Student Project] (Unpublished)

Design and fabricate of solar cooker / Muhamad Syamirul Abu Shah. (2022) [Student Project] (Unpublished)

Multifunction bookshelf / Mohmamad Uzair Hafiz Abdul Fatah. (2022) [Student Project] (Unpublished)

Structure design of rigid tube rib / Adam Zulhelmi Amran. (2022) [Student Project] (Submitted)

Wheel sprayer / Abdullah Muhammad Al-Wahiduddin Adnan. (2022) [Student Project] (Submitted)

Development and kinematic analysis of rocket launcher with different ball parameter / Muhammad Ilhan Salihin Alaman. (2022) [Student Project] (Submitted)

Improvement of supply and retrieval system - for D87 a production line / Muhammad Syahir Ahmad Zabidi. (2016) [Student Project] (Unpublished)

Product improvement of file compartment / Mohd Faizul Ahmad Nawawi. (2006) [Student Project] (Unpublished)

CAD feature recognition by feature based method / Muhamad Asyraf Ahmad Daud. (2020) [Student Project] (Unpublished)

CAD modelling using Gielis Superformula / Azimah Abdul Aziz. (2017) [Student Project] (Unpublished)

Design and fabrication of bicycle roller trainer indoor cycling / Abdul Hakim Abdullah. (2022) [Student Project] (Submitted)

Design and development of the catapult based on cotton ball launcher / Muhammad Asmadi Abdunkarim Yakoh@Ab Karim. (2022) [Student Project] (Submitted)

Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad. (2022) [Student Project] (Submitted)

Design and fabricate name card holder for businessman and corporate use / Ahmad Azrin Hakim Abdul Aziz. (2022) [Student Project] (Submitted)

Modelling of a steep near shore waves at Terengganu coastline during monsoon season using computational method / Abdul Wafiq Qayyum Abdul Azmi. (2022) [Student Project] (Submitted)

Aerodynamic study on go-kart using computer aided tools / Mohd Yusri Abu Bakar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

C

Analysis of lightweight box structure / Mohd Alimin Che Ali. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

E

Design and fabrication of portable cloth rack / Nur Iman Ezani. (2022) [Student Project] (Submitted)

G

Computer aided engineering approach to the development of a lawnmower blade: a reverse engineering application to reduce noise levels / Trishel Gokool … [et al.]. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 50-70. ISSN 1823-5514 ; 2550-164X

H

Design and development of rocket based rubber hollow elastic ball launcher / Syahmie Arif Farhan Husariman. (2022) [Student Project] (Submitted)

Integrated advance machining using CAD/CAM system / Mohd Najib Hazman. (2008) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

CNC software by using Visual Basic / Eka Syabireen Hassan. (1999) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

I

Structure design and analysis of GRP Bedar / Muhammad Adam Idris. (2022) [Student Project] (Unpublished)

Hull form design of single stepped hull using CFD a case study with a 15 meter fast patrol boat / Muhamad Iqbal Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

J

Hull design and stability analysis of rigid tube rib / Muhammad Farhan Haikal Jamaludin. (2022) [Student Project] (Unpublished)

Multipurpose table report / Muhammad Harith Iqmal Johari... [et al.]. (2021) [Student Project] (Submitted)

Membuat acuan sabun dengan menggunakan teknologi CAD/CAM / Donovan Joannes and William Lenjau. (1995) [Student Project] (Unpublished)

Design & fabricate 3D printer pencil case/box for student usage / Mohamad Khairunnaim Jukepely. (2022) [Student Project] (Submitted)

Design and fabrication of arbor clamper using 3d printer ender 800 / Amir Hamzi Jafar. (2022) [Student Project] (Submitted)

K

Automatic drain cleaner / Nur Daliela Wahida Zamry. (2022) [Student Project] (Submitted)

Design and fabricate 3D handphone casing / Muhammad Irfan Khalmaiza. (2022) [Student Project] (Submitted)

L

Design and development of sling based tennis ball launcher / Muhammad Azfar Ramdan Lahmuddin. (2022) [Student Project] (Submitted)

M

Automatic potato peeler / Muhammad Thaqif Muqri Mohd Fekeri. (2022) [Student Project] (Unpublished)

Design and fabrication of automatic sprinkler of Smart Parcel Dropbox (SPD) / Muhammad Muqri Md Yusof. (2022) [Student Project] (Unpublished)

Quick and smart corn peeler / Muhammad Amirul Syahmee Mohd Baseri. (2022) [Student Project] (Unpublished)

Design and development of sling based on ping pong ball launcher / Muhammad Luq Ai Mohd Hassim. (2022) [Student Project] (Submitted)

Design and development of sling based squash ball launcher / Muhammad Izzuddin Mohd Sobri. (2022) [Student Project] (Submitted)

Design and development of catapult based tennis ball launcher / Muhammad Faris Mohd Razali. (2022) [Student Project] (Submitted)

Simulation of flow behaviour of open channel flow through a linear straight contraction using computational approach / Muhammad Amir Ashraf Mohd Haziman. (2022) [Student Project] (Submitted)

Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. (2021) [Student Project] (Submitted)

Multi level moving storage rack / Muhamad Hafizudin Muhammad ... [et al.]. (2021) [Student Project] (Submitted)

CFD analysis / Muhammad Syakir Mohamad Saidi ... [et al.]. (2021) [Student Project] (Submitted)

Development of 3-Dimensional holographic projection for lecture purpose / Nurfatehah Md Pauzi. (2020) [Student Project]

Investigation on PETG tensile properties through 3D printing / Muhammad Syazrul Mohd Zahari. (2020) [Student Project] (Unpublished)

CAD/CAM application in manufacturing / Salwa Mohd Sayutti and Siti Jasmeen Mohd Hashim. (1996) [Student Project] (Unpublished)

Analysis of lightweight box structure / Wan Nor Azam Mohamad. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Stugdy of steel roof and wall-cliding sheet metals and computer-aided drafting / Walter Andrew Maurice, Azmie Jumit and Victor Glance Tiongin. (1996) [Student Project] (Unpublished)

Inventory control using maximo series 5 basic school software / Sabri Mohd Tahir, Marsuhaila Maaris and Shahizam Mohd Sharif. (1998) [Student Project] (Unpublished)

Design of punch and die for trimming operation / Muhammad Asyraf Mohd Lizam. (2022) [Student Project] (Submitted)

Welding demontration table with adjuster / Muhammad Arid Azwar Mazuadi. (2022) [Student Project] (Submitted)

Design and fabrication of sliding platform component of SPD (Smart Parcel Dropbox) / Muhamad Syakir Alif Mohd Saren. (2022) [Student Project] (Submitted)

Design and fabrication of RC boat propeller using 3D printer / Mohamad Shahrul Mohd Hothzani. (2022) [Student Project] (Submitted)

CAD and fabrication of low-pass filter / Norazam Mohd Amin. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Investigation of the rapid prototyping machine (multi jet modeling) capability in product design / Mohd Azri Mohd Azam. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on rehabilitation equipment using CATIA software: standing frame / Mohd Aminul Hilmi Mohamad Hassan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

N

Hull design & stability analysis of solar boat / Nik Najmi Nik Min. (2022) [Student Project] (Submitted)

Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari. (2022) [Student Project] (Unpublished)

The application of computer aided design and manufacturing (CAD/CAM) for teaching aid / Noorashidi Nazari. (1991) [Student Project] (Unpublished)

Product and mould design for motorcycle stand using CAD technique / Sayuti Nashir and Abdul Wapi Hashim. (2002) [Student Project] (Unpublished)

A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.]. (2016) Compendium of Oral Science (COS), 3. pp. 1-8. ISSN 2489-1102; 2637-0611

Roughness prediction of fused deposition modelling / Nur Annisa Ngahadi. (2020) [Student Project]

O

Miniature drilling machine prototype / Muhammad Zakiruddin Osman @ Mohd Nordin. (2022) [Student Project] (Submitted)

Investigation on the deteroriation of dross separation system / Al-Afif Osman. (2015) [Student Project]

R

Design and fabricate mini interceptor / Muhammad Firdaus Rozy. (2022) [Student Project] (Submitted)

Heavy duty hand truck / Abdul Hadi Rosli ... [et al.]. (2021) [Student Project] (Submitted)

Hand sanitizer dispenser / Hakimi Roslan ... [et al.]. (2021) [Student Project] (Submitted)

Post processor modification and machine simulation in 5-axis machining using Fusion 360 CAM / Muhamad Syaimanfathi Razae. (2020) [Student Project] (Unpublished)

Dimensional accuracy of abs 3D printed part using 3D Espresso F220 machine / Ahmad Afiq Aiman Roslan. (2020) [Student Project]

Design optimization of a superbike paddock stand through integrated CAD and CAE system application / Helmi Rashid, Alias Mohd Saman and Mohammad Azzeim Mat Jusoh. (2013) [Research Reports] (Unpublished)

S

Computer aided design of two stage speed reducer / Haidah Saran, Jusilin Gumbuh and Yusmahwati Ahmat Nor. (1997) [Student Project] (Unpublished)

Fruit collector / Muhammad Faizuddin Syahir Shahizam ... [et al.]. (2021) [Student Project] (Submitted)

Design and fabrication of antiseptic sprinkler component of Smart Parcel Dropbox (SPD) / Muhammad Danish Hariz Setapa @ Shari. (2022) [Student Project] (Submitted)

Design and fabricate universal hook for car usage / Sayed Saqif Iman Sayed Safari. (2022) [Student Project] (Submitted)

Design and manufacture of a plastic dressing forceps using CAD/CAM technique / Zainila Salam and Samson Michael. (2001) [Student Project] (Unpublished)

Mould design and fabrication using CAD/CAE facilities / Nurul Azhan Sallehuddin and Razali Hassan. (1993) [Student Project] (Unpublished)

Development of on-line mechanical engineering design and manufacturing process / Juri Saedon ... [et al.]. (2007) [Research Reports] (Unpublished)

T

Design and fabricate toys box for small toys or Lego / Muhammad Muizzuddin Tajudin. (2022) [Student Project] (Unpublished)

Design and fabrication of lamp stationery rack / Tengku Ammer Aizad Tengku Sulaiman. (2022) [Student Project] (Submitted)

Pemanfaatan teknologi cetak 3 dimensi sebagai upaya pelestarian gerabah bentanga / Taufik Panji Wisesa. (2020) Idealogy Journal, 5 (1). pp. 179-195. ISSN 2550-214X

Computer aided flow analysis in a cavitation tunnel / Tengku Maziah Tengku Abdullah. (1998) [Student Project] (Unpublished)

W

Design and fabrication of cloth folding machine / Wan Nur Amila Wan Mohd Yusoff. (2022) [Student Project] (Submitted)

Agriculture / Wan Muhammad Irham Idzney Wan Mohd Zulkifli ... [et al.]. (2021) [Student Project] (Submitted)

Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. (2022) [Student Project] (Submitted)

Design and fabrication of minimalzie wall table with storage / Wan Muhammad Jazli Na'im Wan Rozain. (2022) [Student Project] (Submitted)

Design and fabrication of main box and shutter door of Smart Parcel Dropbox (SPD) / Wan Muhamad Afiq Firdaus Wan Suhaime. (2022) [Student Project] (Submitted)

Hull design and stability of GRP payang boat / Wan Lutfi Wan Zullkefli. (2022) [Student Project] (Submitted)

Design and fabrication of gout patient movable device / Wan Ahmad Syamil Asyraf Wan Azman. (2022) [Student Project] (Submitted)

Y

CAD/CAM of industrial product / Abdul Rahman Yusof and Rasli Mohamad. (1996) [Student Project] (Unpublished)

Kajian ke atas keberkesanan subjek CAD/CAM terhadap kecekapan jurutera pembuatan dan jurutera mekanikal bagi graduan-graduan universiti awam / Mohamad Irwan Yahaya, Rosley Jaafar and Noor Iswadi Ismail. (2007) [Research Reports] (Unpublished)

Determination of dynamic characteristic of helical gear using finite element analysis and modal testing / Mohd Izzuddin Yusof. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Z

Design and fabricate hand sanitizer holder for car under hot temperature / Muhammad Aiman Nazrin Zaki. (2022) [Student Project] (Submitted)

Production design rigid tube rib / Muhammad Amirul Zakaria. (2022) [Student Project] (Unpublished)

An overview of the CIM implementation / Mohd Zaidi Zawawi. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

How can three dimensional computing inform the industrial design process / Shahriman Zainal Abidin. (2003) Wahana Akademik, 2 (1). pp. 41-47. ISSN 1675-2414

Manufacturing process using CAD/CAM technology / Mohamad Ali Zainol and Mohd Nasir Ab. Manaf. (1993) [Student Project] (Unpublished)