Items where Subject is "Applied fluid mechanics"

A

Ab Rashid, Afiqah (2022) Propulsion system design of amphibious boat / Afiqah Ab Rashid. [Student Project] (Submitted)

Abdul Aziz, Fazilah and Alauldin, Syarmela (1999) Studies on the performance of artificially submerged waterjet / Fazilah Abdul Aziz and Syarmela Alauldin. [Student Project] (Unpublished)

Abdul Azmi, Abdul Wafiq Qayyum (2022) Modelling of a steep near shore waves at Terengganu coastline during monsoon season using computational method / Abdul Wafiq Qayyum Abdul Azmi. [Student Project] (Submitted)

Amir Rizal, Amira Natasha (2022) Heat transfer analysis of different cooling medium on a condenser of refrigeration system / Amira Natasha Amir Rizal. [Student Project] (Unpublished)

C

Che Lah, Ayurahani (2006) Study on laminated composite material using numerical approach / Ayurahani Che Lah. [Student Project] (Unpublished)

Che Mohamad Noor, Ahmad Ikmal Haziq (2022) Propulsion system design of GRP payang potong belakang / Ahmad Ikmal Haziq Che Mohamad Noor. [Student Project] (Unpublished)

H

Hamdi, Rabiatul Adawiyah (2019) CFD modelling of CO₂ removal from natural gas using graphene based membrane. [Student Project] (Unpublished)

Hamdi, Rabiatul Adawiyah and Md. Yusop, Nadiahnor and Othman, Nurhidayati (2019) CFD modelling of CO₂ removal from natural gas using graphene based membrane: article. pp. 1-5.

Harun Anuar, Muhammad Fikri (2022) Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar. [Student Project] (Unpublished)

I

Idris, Muhammad Adam (2022) Structure design and analysis of GRP Bedar / Muhammad Adam Idris. [Student Project] (Unpublished)

J

Jamal, Muhammad Haikal Daniel (2022) Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. [Student Project] (Unpublished)

K

Kamal Azman Shah, Siti Norshafiqah (2022) Investigation on pressure variation of steam on efficiency of steam powered motor / Siti Norshafiqah Kamal Azman Shah. [Student Project] (Submitted)

M

Md Izaninulhadi, Muhamad Daniel Haiqal (2022) Resistance prediction of solar boat in calm water using computational fluid dynamic approach / Muhamad Daniel Haiqal Md Izaninulhadi. [Student Project] (Unpublished)

Misnan, Nabilatul Athirah (2022) Resistance prediction of amphibious boat in calm water using computational fluid dynamic approach / Nabilatul Athirah Misnan. [Student Project] (Submitted)

Mohd Abdillah, Muhammad Hanif (2022) A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. [Student Project] (Submitted)

Mohd Adenan, Muhammad Izhar Firki (2022) Experimental investigation of flow behaviour of open channel flow through a linear straight contraction / Muhammad Izhar Firki Mohd Adenan. [Student Project] (Submitted)

Mohd Ali, Muhammad Azim Azran (2022) Determination of energy losses in pipe fittings of a flow with variation of reynold number / Muhammad Azim Azran Mohd Ali. [Student Project] (Submitted)

Mohd Andrie, Nur Adriana Auni (2022) Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie. [Student Project] (Submitted)

Mohd Haziman, Muhammad Amir Ashraf (2022) Simulation of flow behaviour of open channel flow through a linear straight contraction using computational approach / Muhammad Amir Ashraf Mohd Haziman. [Student Project] (Submitted)

Mohd Nazrie, Muhammad Nazmi (2022) Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. [Student Project] (Unpublished)

Mohd Sabri, Muhammad Adib (2017) Wear and adhesive performance investigation on Co-Ni-Fe coated mild steel / Muhammad Adib Mohd Sabri. [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. [Student Project] (Submitted)

Mokri, Abd Halim (2008) Development of instrumentation system for temperature control / Abd Halim Mokri. [Student Project] (Unpublished)

Muhd Yusoff, Mohammad Yushaiman Habib and Wan Zakaria, Wan Mohamad Fahmi and Lokman @ Nejib, Muhammad Arash Mifzal and Izaudin, Muhammad Hasif Fitri and Muhammad Hilmi, Ahmad Haiqal Fikri (2021) Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. [Student Project] (Submitted)

Mustafa, Nur Amalina (2018) Fluid structure interaction (FSI) study at the small bore connection (SBC) due to water hammer. [Student Project] (Unpublished)

Mustafa, Nur Amalina and Md Yusop, Nadiahnor (2018) Fluid structure interaction (FSI) study at the small bore connection (SBC) due to water hammer: article. pp. 1-6.

N

Nik Min, Nik Najmi (2022) Hull design & stability analysis of solar boat / Nik Najmi Nik Min. [Student Project] (Submitted)

Noor Azhari, Mohamad Noor Asnawi (2022) Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari. [Student Project] (Unpublished)

Noor Hazly, Muhammad Danny Hafiz (2024) Comparative study of different water flowrates of various working fluids on a cooling tower / Muhammad Danny Hafiz Noor Hazly. [Student Project] (Unpublished)

Nor Azhari, Muhamad Azim Najmi (2022) Simulation of variation of flow in different types of pipe fittings using computational approach / Muhamad Azim Najmi Nor Azhari. [Student Project] (Submitted)

O

Olanrewaju, Ajani Jimoh and Zainal, Muhammad Thalhah and Mohd Yasin, Mohd Fairus and Rahman, Nurizat and Ibrahim, Mohammad Hilmi (2026) Modelling the effects of equivalence ratio on carbon nanotubes diameter in premixed flame based on a semi-empirical approach. Journal of Mechanical Engineering , 23 (3) : 6 . pp. 111-129. ISSN 2550-164X.

R

Roslan, Muhammad Azri Faiz (2022) Structure design and analysis of GRP Payang boat / Muhammad Azri Faiz Roslan. [Student Project] (Unpublished)

Ruslan, Azfar and Kamaruddin, Nadia (2020) Numerical study of reynolds number effect in fluid jet impingement cooling heat transfer on concave surface: article. pp. 1-5.

Ruslan, Muhammad Azfar (2020) Numerical study of reynolds number effect in fluid jet impingement cooling heat transfer on concave surface. [Student Project] (Unpublished)

S

Saiful Anuar, Muhammad Faris (2022) Heat transfer analysis of different cooling medium on a condenser / Muhammad Faris Saiful Anuar. [Student Project] (Unpublished)

T

Tahir, Abdul Raihan and Abd. Mutalib, Shaiful Anuar (1989) Design and fabrication of a centralised exhoust system for automoble lab / automobile / Abdul Raihan Tahir and Shaiful Anuar Abd. Mutalib. [Student Project] (Unpublished)

Z

Zakaria, Mohd Fahmi (2010) Computational fluid dynamics (CFD) study on the effects of 2008 and 2009 wing regulation by FIA on Formula 1 car for tandem conditions / Mohd Fahmi Zakaria. Degree Thesis , Universiti Teknologi MARA (UiTM) .