Items where Subject is "Industrial engineering. Management engineering"

Article

Sapitri and Sritika Arfilia and Harmiyati (2024) Risk analysis of small dam projects in Lima Puluh Kota area using Failure Mode and Effect Analysis / Sapitri, Sritika Afrilia and Harmiyati. (2024) Journal of Smart Science and Technology, 4 (1): 5. pp. 57-66. ISSN 2785-924X

Abdul Nassir, Azizah and Yee, Hooi Min and Senin, Syahrul Fithry (2021) Computational mechanics analysis in elevated shell platform structures / Azizah Abdul Nassir, Yee Hooi Min and Syahrul Fithry Senin. (2021) Journal of Mechanical Engineering, 18 (3): 15. pp. 247-259. ISSN 2550-164X

Abdullah, M. D. and Ahmad, A. A. and Abdul Rahman, S. M. B. (2025) Improving workplace safety: an ergonomic assessment and engineering control approach. (2025) Journal of Applied Engineering Design & Simulation (JAEDS), 5 (2): 7. pp. 66-78. ISSN 2805-5756

Marzuki, Afeeqa Puteri and Mohd Salleh, Farrahshaida and Rosli, Muhammad Nazri Shah and Tharazi, Izdihar and Abdullah, Abdul Hakim and Abdul Halim, Nurul Hayati (2022) Rheological, mechanical and physical properties of poly-lactic acid (PLA)/ hydroxyapatites (HA) composites prepared by an injection moulding process / Afeeqa Puteri Marzuki … [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 19 (2): 23. pp. 17-40. ISSN (eISSN): 2550-164X

Md Kamaludin, Kamal Fiqre and Jumidali, Mohd Muzafa and Ahmad Sa’ad, Fathınul Najıb and Mat Amin, Abd Rahman (2022) Remote sensing study of the temperature profile over Penang Island using Nasa Giovanni system / Kamal Fiqre Md Kamaludin ... [et al.]. (2022) ESTEEM Academic Journal, 18 (Sept): 3. pp. 20-30. ISSN 2289-4934

Mohd Yusof, Nur Radiah and Abdul Rashid, Zulkifli (2017) Optimal layout of a LPG storage facility to minimize risk to human: article. (2017) pp. 1-7.

Mohd Yusoff, Zakiah and Nordin, Siti Aminah and Muhammad, Zuraida and Ismail, Nurlaila (2025) Examining the trend in agarwood oil studies for the 5 recent years (2019-2023): a comprehensive bibliometric analysis using VOSviewer. (2025) Journal of Electrical and Electronic Systems Research (JEESR), 27 (1): 11. pp. 87-101. ISSN 1985-5389

Mohd Zaidi, Aiman Hazim and Aiman Hazim Bin Mohd Zaidi, Dr Zulkifli Ab Rashid, Mohd Zaidi (2019) Analysis of total burn surface area from bleve fireball impact at dynamic parameter condition: article. (2019) pp. 1-6.

Musa, Muhamad Faiz and Yusof, Mohd Reeza and Samsudin, Noor Sahidah and Muhamad Halil, Faridah (2016) Adopting industrialisation in the construction environment: meeting the requirements of sustainability / Muhamad Faiz Musa …[et al.]. (2016) Scientific Research Journal, 13 (2). pp. 45-66. ISSN 2289-649X

Omar, Muhamad Khalil and Yusoff, Yusri Hazrol and Abdul Rahman, Zahira (2022) A study on the determinants of engagement and ambidexterity among engineers in SMEs engineering consulting firms / Muhamad Khalil Omar, Yusri Hazrol Yusoff and Zahira Abdul Rahman. (2022) Asia-Pacific Management Accounting Journal (APMAJ), 17 (3): 3. pp. 47-88. ISSN 2550-1631 (Unpublished)

Pg Osman, Dg Ku Nornasuha Nassa and Ahmad, Aizad (2018) Effect of different temperature using energy analysis for power to methanol production plant: article / Dg Ku Nornasuha Nassa Pg Osman and Aizad Ahmad. (2018) pp. 1-6.

Rayeg, Olivia and Petrus, Clotilda and Marajan, Caroline and Tawie, Rudy and Na, Wongi S. and Ang, Chung Huap and Nyuin, Joe (2021) A review on the application and morphology of organic corrosion inhibitors / Olivia Rayeg ...[et.al.]. (2021) Journal of Smart Science and Technology, 1 (1): 3. pp. 23-39. ISSN 2785-924X

Rosla, Ameer F. and Salehuddin, F. and Zain, A.S.M. and Kaharudin, K.E. and Mohamad, N.R. and A.H, Afifah Maheran and Haroon, H. and Razak, H.A. and Idris, S.K. and Ahmad, I. (2022) Statistical optimization influence on high permittivity gate spacer in 16nm DG-FinFET device / Ameer F. Rosla … [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 19 (1): 18. pp. 145-162. ISSN (eISSN): 2550-164X

Siek, Hwee Ling (2020) Action research progress on incorporating augmented reality into courses: Taking digital publishing as an example / Siek Hwee Ling. (2020) International Journal of INTI, 24 (SI): 11. pp. 74-82. ISSN 0126-5822

Yaacob, Muhamad Izwan (2011) Linear predictive coding analysis and synthesis of speech using MATLAB: article. (2011) pp. 1-7.

Yahaya, Mohamad Irwan and Jaafar, Rosley and Ismail, Noor Iswadi (2008) Kajian ke atas keberkesanan kursus CAD/CAM terhadap kecekapan jurutera pembuatan dan jurutera mekanikal bagi graduan-graduan universiti awam / Mohamad Irwan Yahaya, Rosley Jaafar and Noor Iswadi Ismail. (2008) Esteem Academic Journal, 4 (2). pp. 75-89. ISSN 1675-7939

Yamin, Mohamad and Abdul-Rahman, Hamzah and Mohammed Alashwal, Ali (2017) Developing a framework for the success of international development projects in the Maldives / Mohamed Yamin… [et.al]. (2017) International Journal Of Service Management And Sustainability (IJSMS), 2 (1). pp. 1-15. ISSN 2550-1569

Zambri, Amirul Afif and Kamaruzaman, Muhamad Fairus (2020) The assimilation of augmented reality in learning environment / Amirul Afif Zambri and Muhamad Fairus Kamaruzaman. (2020) International Journal of INTI, 24 (SI): 10. pp. 63-73. ISSN 0126-5822

Book Section

Alias, Mohd Suffian and Rizman, Zairi Ismael and Miskon, Mohamad Taib and Mat Zain, Mohamad Yusof (2012) Effective automatic fan / Mohd Suffian Alias … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Hasbullah, Nor Asiakin (2018) Citizen-centric privacy requirements engineering framework / Nor Asiakin Hasbullah. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Monograph

Abdul Ghani, Ariff Fahmi (2017) Jabatan Kerja Raya (JKR), Daerah Muar / Ariff Fahmi Abdul Ghani. (2017) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Ahmad Jumali, Muhd Ikmal Hafiy (2015) Kilang Municipal Council / Muhd Ikmal Hafiy Ahmad Jumali. (2015) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang. (Unpublished)

Amirul, Amirul Jasmin (2015) BTS Engineering Sdn. Bhd. / Amirul Jasmin Amirul. (2015) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang. (Unpublished)

Ishak, Izzat Rais (2018) Jabatan Kerja Raya (JKR), Daerah Muar / Izzat Rais Ishak. (2018) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang. (Unpublished)

Ismail, Nurul Najwa Suhadah (2022) A study of Sewege Treatment Plants (STP) 1 at UiTM Merbok / Nurul Najwa Suhadah Ismail. (2022) Industrial Training. Universiti Teknologi MARA UiTM,Perak.

Kamaludin, Nur Shahirah (2017) Jabatan Kerja Raya (JKR), Daerah Muar / Nur Shahirah Kamaludin. (2017) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Khairuddin, Nur Adillah (2015) Jabatan Pengairan Dan Saliran Daerah Klang/ Nur Adillah Khairuddin. (2015) Industrial Training. UITM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Md Sarif, Amirul Irham (2018) JKR Daerah Muar / Amirul Irham Md Sarif. (2018) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Mohamad Nor, Nur Khairunnisha Shaheera (2017) Jabatan Kerja Raya (JKR), Daerah Muar / Nur Khairunnisha Shaheera Mohamad Nor. (2017) Industrial Training. UITM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang, Johor. (Unpublished)

Mohamed Zin, Nor Hayati (2015) Jabatan Kerja Raya Jajahan Kuala Krai / Nor Hayati Mohamed Zin. (2015) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Mohd Noor, Muhamad Aiman Afiq (2022) Novelty value through the aesthetics of car design / Muhamad Aiman Afiq Mohd Noor. (2022) Bulletin. Universiti Teknologi MARA, Kedah, Universiti Teknologi MARA, Kedah.

Muhamad Nifsu, Muhammad Norhisyam (2017) Pejabat Besar, Majlis Daerah Tangkak / Muhammad Norhisyam Muhamad Nifsu. (2017) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Norizlanin, Nur Farah Aina (2019) Damai Abadi (Johor) Facility Management Sdn Bhd / Nur Farah Aina Norizlanin. (2019) Industrial Training. UiTM Johor Cawangan Kampus Pasir Gudang, Pasir Gudang, Johor. (Unpublished)

Rosli, Siti Nurul Najieha (2018) Saj Ranhill Sdn. Bhd / Siti Nurul Najieha Rosli. (2018) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang. (Unpublished)

Shamsudin, Muhammad Shamsusyazwan (2017) Jabatan Kerja Raya (JKR), Daerah Muar / Muhammad Shamsusyazwan Shamsudin. (2017) Industrial Training. UITM Cawangan Johor Kampus Pasir Gudang, UiTM Pasir Gudang. (Unpublished)

Usang, Tanyong Melai (2018) Public Works Department of Miri Sarawak / Tanyong Melai Usang. (2018) Industrial Training. UiTM Cawangan Johor Kampus Pasir Gudang, Pasir Gudang. (Unpublished)

Zainal, Mohamad Hafizuddin Hakim (2018) Jabatan Kerja Raya (JKR), Daerah Muar / Mohamad Hafizuddin Hakim Zainal. (2018) Industrial Training. UiTM Johor Pasir Gudang, Pasir Gudang, Johor. (Unpublished)

Zainudin, Ahmad Zaid Hazim (2015) Nuri Cergas Sdn Bhd / Ahmad Zaid Hazim Zainudin. (2015) Industrial Training. UITM Cawangan Johor Kampus Pasir Gudang, Uitm Pasir Gudang. (Unpublished)

Conference or Workshop Item

Mhd Khatif, Nur Fatin Nasuha and Ahmad Razan, Fahda Nurhani and Muhamad Bashar, Nur Azwa and Hamzah, Nurakmal (2021) Sustainable hybrid G-W filter / Nur Fatin Nasuha Mhd Khatif ... [et al.]. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021). (Submitted)

Mohamad Suki, Nurdayana and Wan Zaharuddin, Wan Akmal Zahri (2019) Augmented Reality (AR) glasses for inspection of steel formwork system / Nurdayana Mohamad Suki and Wan Akmal Zahri Wan Zaharuddin. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Muhamad Bashar, Nur Azwa and Rahman, Nur Raihan Sofiyah and Md Isa, Nur Hanem Syarhida and Alias, Salina and Abdul Talib, Suhaimi (2020) Multipurpose fabricated bubble wrapping plastic liner (BW-LINER) for general engineering application / Nur Azwa Muhamad Bashar ... [et al.]. (2020) In: International Innovation, Invention and Design Competition, 17 May-10 Oct 2020.

Book

Buniyamin, Norlida Engineering education & practice in Malaysia / Norlida Buniyamin. UiTM Press, UiTM Shah Alam. ISBN 978-967-363-823-9

Thesis

Abd Rahman, Norida (2016) Evaluation framework for public R&D program / Norida Abd Rahman. (2016) PhD thesis, thesis, Universiti Teknologi MARA.

Abdul Rahman, Farah Aimi (2017) Safety checklist to manage fatalities and accidents risk at telecommunication sites / Farah Aimi Abdul Rahman. (2017) Masters thesis, thesis, Universiti Teknologi MARA.

Abdul Samad, Shaharuddin (1996) The line-of-balance programme on repetitive works: case study / Shaharuddin Abdul Samad. (1996) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Alias, Zamzunita (2013) Risk management during requirement engineering process / Zamzunita Alias. (2013) Masters thesis, thesis, Universiti Teknologi Mara (UiTM).

Amat, Norani (Datin) (2020) Building information modelling (BIM) adoption for building maintenance among local authorities in Selangor / Norani Amat (Datin). (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Amerudin, Ainuddin (1998) Kemalangan ditapak bina.sejauhmanakah langkah-langkah yangdiambil untuk mengatasi fenomena ini.kajian kes : lembah klang / Ainuddin Amerudin. (1998) Degree thesis, thesis, Universiti Teknologi MARA.

Chat, Nursuhana (2006) “Hygiene in construction site” / Nursuhana Chat. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Hassan, Adnan (2000) A study on customer evaluation of the attributes towards Pioneer Sun-Mix Concrete Sdn. Bhd. Ready-Mix Concrete in Northern Region Specifically Penang / Adnan Hassan. (2000) Degree thesis, thesis, Universiti Teknologi MARA, Kelantan.

Hassan, Mohd Azrin (2014) Study on change readiness in systems, applications and products (SAP) implementation at Indah Water Konsortium Sdn Bhd. / Mohd Azrin Hassan. (2014) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Ibrahim, Zamzuri (1998) Construction practice in Malaysia a case study/ Zamzuri Ibrahim. (1998) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Jaapar, Aini (2006) The application of value management in the Malaysian construction industry and development of prototype value management guidelines / Aini Jaapar. (2006) PhD thesis, thesis, Universiti Teknologi MARA.

Kamal Amiramzah, Amar Ashraff (2010) Indoor air quality (IAQ) at educational facilities in Faculty of Mechanical Engineering's building / Amar Ashraff Kamal Amiramzah. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Md Ghazali, Nurianie (2000) Sejauh manakah keberkesanan penguatkuasaan Akta Kilang dan Jentera 1967 dijalankan di tapak bina / Nurianie Md Ghazali. (2000) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Mohamad, Azam (2006) A study on the maintenance management of food courts / Azam Mohamad. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Mohd Affandi, Haryanti (2014) A generic competency framework for entry level construction managers in Malaysia / Haryanti Mohd Affandi. (2014) PhD thesis, thesis, Universiti Teknologi MARA.

Mohd Othman, Noor Azizah (1992) An analysis of delay factors affecting labour productivity in construction using / Noor Azizah Mohd Othman. (1992) Advanced Diploma thesis, thesis, Institut Teknologi MARA (ITM).

Mohd Sulaiman, Norsuzaini (2003) A study on the implementation of safety and health policies at construction projects in relation to no. of accidents occur (contractors class ‘A’ and ‘C’) / Norsuzaini Mohd Sulaiman. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

Pg Osman, Dg Ku Nornasuha Nassa (2018) Effect of different temperature using energy analysis for power to methanol production plant / Dg Ku Nornasuha Nassa Pg Osman. (2018) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Raja Mohd Noor, Raja Nor Husna (2024) Development of an assessment tool for multiactor social collaboration in BIM construction projects / Raja Nor Husna Raja Mohd Noor. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Ramli, Azahari (1996) A study on handling equipments operation and performance at Port Klang-KPCT Sdn Bhd / Azahari Ramli. (1996) Degree thesis, thesis, Universiti Teknologi MARA.

Sapri, Nurnadia (2015) Effect of file sizes on encryption and decryption in constrained devices / Nurnadia Sapri. (2015) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Wahid, Widia (2009) Safety engineering in faculty of Mechanical Engineering's laboratories / Widia Wahid. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Zabidin, Nadia Safura (2024) Industry 4.0 framework for construction engineering industry-academia adoptions in Malaysia / Nadia Safura Zabidin. (2024) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Zolkafli, Mohd Darabi (2008) Maintenance management practiced by MARA (MRSM) / Mohd Darabi Zolkafli. (2008) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zulkefli, Ahmad Zulhaimi Hafeez (2015) Improving of quality management system implementation and effectiveness for sealine project / Ahmad Zulhaimi Hafeez Zulkefli. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Student Project

Ab Manaf, Mohammad Amirul (2015) Building condition audit in public building case study at Majlis Bandaraya Shah Alam / Mohammad Amirul Ab Manaf. (2015) [Student Project] (Unpublished)

Abd Hadi, Mohd Kamarul Ariffin and Muhammad Suffian, Sulaiman (2004) The prediction of carbon monoxide exhaust emission diesel engine using artificial neural network / Mohd Kamarul Ariffin Abd Hadi and Sulaiman Muhammad Suffian. (2004) [Student Project] (Unpublished)

Abd. Rahman, Zulkarnain and Mohamed, Azmi (1999) Program pemprosesan data / Zulkarnain Abd. Rahman dan Azmi Mohamed. (1999) [Student Project] (Unpublished)

Abdul, Mohamad Adam Muqri (2022) Photo analyses of a fully submerged static vehicles on different water velocity / Mohamad Adam Muqri Abdul. (2022) [Student Project] (Submitted)

Abdullah, Abdul Hakim (2022) Design and fabrication of bicycle roller trainer indoor cycling / Abdul Hakim Abdullah. (2022) [Student Project] (Submitted)

Abdullah, Aidi and Ismar, Mohd Fadzuluh (1994) Mesin pembersih paip air buangan / Aidi Abdullah and Mohd Fadzuluh Ismar. (1994) [Student Project] (Unpublished)

Abu Hashim, Shahida and Mohd Johan, Norlina and Tharazi, Izdihar (2003) Research on safety in heavy industry / Shahida Abu Hashim, Norlina Mohd Johan and Izdihar Tharazi. (2003) [Student Project] (Unpublished)

Ahmad Daud, Muhamad Asyraf (2020) CAD feature recognition by feature based method / Muhamad Asyraf Ahmad Daud. (2020) [Student Project] (Unpublished)

Anak David Asen, Susie Nadya (2007) Effects of the environmental, occupational safety and health regulations towards the successful completion of a project / Susie Nadya Anak David Asen. (2007) [Student Project] (Unpublished)

Awang Chik, Amirudin (1992) Constructability improvement during field operations/ Amirudin Awang Chik. (1992) [Student Project] (Unpublished)

Ayub, Abdul Rahman and Eman, Janidah (2006) A study on the problems encountered by organisations in the implementation of Quality Management System ISO 9001:2000 in construction industry. (case study location: Klang Valley area, N. Sembilan, Melaka and Johore - 2 site - visits per location) / Abdul Rahman Ayub and Janidah Eman. (2006) [Student Project] (Unpublished)

Che Kadir, Mohd Zaid and Hashim, Wan Azmi (1989) Kajian kemungkinan mendirikan bengkel bagi kerja baikpulih & pembuatan bot nelayan di Kuala Besut, Besut, Terengganu / Mohd Zaid Che Kadir and Wan Azmi Hashim. (1989) [Student Project] (Unpublished)

Che Weel, Adenan (1999) A Study on the implementation of ISO 9000 quality system and its significance / effect on the product quality of ford vendors / Adenan Che Weel. (1999) [Student Project] (Unpublished)

Empang, David (2006) Microscopic queuing study at Batu Tiga Toll Plaza / David anak Empang. (2006) [Student Project] (Unpublished)

Hasnu Al Hadi, Anis Liyana Nadzirah (2022) Proposed an air -conditioning using cooling load calculation for better living environment / Anis Liyana Nadzirah Hasnu Al Hadi. (2022) [Student Project] (Submitted)

Husin, Muhammad F. and Mohamad, Ahmad Aizuddin and Ahmad Zukeri, Nur Akma and Ahmad Nizam, Anis Shahirah and Zamri, Mirza Qaddriena Process safety accident analysis in process chemical industries / Muhammad F. Husin. [Student Project] (Unpublished)

Hussain, Nur Syuhaida (2017) Safety and risk evaluation implementation at sheet metal stamping industry using HIRARC model / Nur Syuhaida Hussain. (2017) [Student Project] (Unpublished)

Hussin, Adryshia (2018) Case study of motivating factors of product innovation at Oscapower Sdn Bhd in Menggatal, Sabah / Adryshia Hussin. (2018) [Student Project]

Ismail, Nor Ismanadia (2022) Photo analysis of a fully submerged static vehicle in a flowing water / Nor Ismanadia Ismail. (2022) [Student Project] (Submitted)

Japar Ali, Johari and Othman, Azlin (1992) Masalah-masalah yang dihadapi oleh industri foundri di Malaysia khususnya dalam proses penuangan pasir / Johari Japar Ali dan Azlin Othman. (1992) [Student Project] (Unpublished)

Khamis, Azlinda Fire protection services / Azlinda Khamis. [Student Project] (Unpublished)

Mohd Alif, Muhammad ‘Ammar Aiman (2022) Comparative study of drag and lift force for different shapes of submarines / Muhammad ‘Ammar Aiman Mohd Alif. (2022) [Student Project] (Unpublished)

Mohd Burhan, Ahmad Amirul Haziq (2022) Rula assessment risk on muscular pain and prevention exercise: welding practical work on learning process at UiTM Bukit Besi / Ahmad Amirul Haziq Mohd Burhan. (2022) [Student Project] (Submitted)

Mohd Mokhtar, Sazrin and Nik Alui, Nik Azlin and Bahari, Shahril Anuar (1999) Cumulative Trauma Disorder (C.T.D) / Sazrin Mohd Mokhtar, Nik Azlin Nik Alui and Shahril Anuar Bahari. (1999) [Student Project] (Unpublished)

Mohd Ramlan, Norazman and Wan Mamat, Wan Mohd Yusri (1990) Merekabentuk almari asrama (siap/separa siap(KD)) dan rancangan pemprosesan pengeluarannya / Norazman Mohd Ramlan and Wan Mohd Yusri Wan Mamat. (1990) [Student Project] (Unpublished)

Mohd Tanzizi, Noor Atikah (2013) Employee acceptance towards implementation of RFID: a case of Pos Malaysia Berhad, Malaysia / Noor Atikah Mohd Tanzizi. (2013) [Student Project] (Unpublished)

Mohd Yusof, Nur Radiah (2017) Optimal layout of a LPG storge facility to minimize risk to human. (2017) [Student Project] (Unpublished)

Mohd Zaidi, Aiman Hazim (2019) Analysis of total burn surface area from bleve fireball impact at dynamic parameter condition. (2019) [Student Project] (Unpublished)

Muhammad Ali, Khairul Ammar (2006) Comparison between Islamic insurance and conventional insurance on construction project / Khairul Ammar Muhammad Ali. (2006) [Student Project] (Submitted)

Muhammad Sohaimi, Muhammad Aliff (2018) Effect of different pressure using safety analysis for power to methanol production plant / Muhammad Aliff Muhammad Sohaimi. (2018) [Student Project] (Unpublished)

Nasser Shah, Nur Atiqah (2018) Identification and counting of brown planthopper in the paddy field using image processing techniques / Nur Atiqah Nasser Shah. (2018) [Student Project] (Unpublished)

Nor Azami, Nur Khairyn (2021) Smart safety ladder / Nur Khairyn Nor Azami. (2021) [Student Project]

Othman, Rohaya (2002) Tensile test method for 3-D fabrics/ Rohaya Othman. (2002) [Student Project] (Unpublished)

Rozlan, Muhammad Zhafri Hisyam (2017) Study of occupational safety and health hazard identification, risk assesment and risk control at NGK Spark Plug Malaysia Berhad / Muhammad Zhafri Hisyam Rozlan. (2017) [Student Project] (Unpublished)

Said, Muhamad Hanis (2018) Employing dual-platform indoor and outdoor smart home monitoring with Internet of Thing (IoT) system / Muhamad Hanis Said. (2018) [Student Project] (Unpublished)

Sakur, Noor Azmil (1994) Maintenance system for an institution of higher learning - ITM campus / Noor Azmil Sakur. (1994) [Student Project] (Unpublished)

Sha’ari, Nor Silawati (2018) Plant recognition based on identification of leaf image using image processing / Nor Silawati Sha’ari. (2018) [Student Project] (Unpublished)

Sidek, Adam and Mohamad Ali, Amirudin (1995) Pengurusan chip di industri / Adam Sidek dan Amirudin Mohamad Ali. (1995) [Student Project] (Unpublished)

Tarmizi, Nor Akmal (2006) Relationship between project liability period and project quality / Nor Akmal Tarmizi. (2006) [Student Project] (Submitted)

Wan Hasan, Wan Muhammad Akram (2018) Starfruit ripeness classification system based on image processing technique / Wan Muhammad Akram Wan Hasan. (2018) [Student Project] (Unpublished)

Yaacob, Muhamad Izwan (2011) Linear Predictive Coding (LPC) analysis and synthesis of speech using MATLAB. (2011) [Student Project] (Unpublished)

Zainal Abidin, Nurashikin (2007) Parking demand trend of private hospital / Nurashikin Zainal Abidin. (2007) [Student Project] (Unpublished)

Zolkafli, Afizan (2004) Queuing studies at ELITE Ebor Selatan toll plaza / Afizan Zolkafli. (2004) [Student Project] (Unpublished)

Entrepreneurship Project

Abas, Syaidatul Umairah Solehah (2020) Case Study : NZAA Trading / Syaidatul Umairah Solehah Abas. (2020) [Entrepreneurship Project] (Unpublished)

Azman, Anees Azyan Farhana and Zai, Erleyana and Mohd Zaini, Nurshafiqa and Shahrudin, Syahirah Shazwani (2019) New product development: smart extension cord / Anees Azyan Farhana Azman, Erleyana Zai ... [et al.]. (2019) [Entrepreneurship Project] (Submitted)

Research Reports

Omar, Abdul Rahman (Associate Professor Ir Dr Hj) and Solomon, Darius Gnanaraj (Associate Professor Dr) and Bahari, Md Fuad (Associate Professor Hj) and Saad, Nor Hayati (2006) Development of material handling techniques to improve occupational health in Malaysian Small & Medium Industries (SMIs) / Associate Professor Ir Dr Hj Abdul Rahman Omar ... [et al.]. (2006) [Research Reports] (Unpublished)