Items where Subject is "Descriptive and experimental mechanics"

Group by: Creators | Item Type
Jump to: A | B | C | D | H | I | J | K | M | O | R | S | T | W | Y | Z
Number of items at this level: 93.

A

Pembelajaran efektif menggunakan penunjuk Newton's Free Body Diagram (FBD) / Amin Aadenan … [et al.]. (2018) Jurnal Inovasi Malaysia (JURIM), 2 (1). pp. 61-74. ISSN 2600-7606

Derivation of radiative transfer parameters using image-based technique / Wan Noniafida Ab Manan. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Temperature dependant of monoethanolamine for carbon nanotubes growth via floating catalyst method / Syahira Farhana Ab Rahman. (2013) [Student Project] (Unpublished)

Capacity performance of VRLA battery and automotive battery for energy backup in telecommunication access / Nurhayati Abd Halim. (2011) [Student Project] (Unpublished)

The thermal comfort of students in air-conditioned lecture rooms / Mohd Redzuan Abd Rahman. (2006) [Student Project] (Unpublished)

Processing of LiCo₀₋₉Mn₀₋₁O₂ materials to nano-size using a ball milling method / Noor Hafizah Abdol Wahab. (2012) [Student Project] (Unpublished)

Performance of particle swarm optimization under different range of direct current motor's moment of inertia / Mohd Azri Abdul Aziz. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 14 (14). Institute of Graduate Studies, UiTM, Shah Alam.

Correlation between red and blue magnitude of stars in open cluster M34 / Nor Azida Abdul Aziz. (2007) [Student Project] (Unpublished)

Correlation between red and blue magnitude of stars in the open cluster M34 / Nor Azida Abdul Aziz. (2007) [Student Project] (Unpublished)

Ring cavity erbium doped fiber laser / Siti Norsabrina Abdul Gaffur. (2006) [Student Project] (Unpublished)

Crack detection in welded material by using pulse echo ultrasonic method / Noramyzura Abdul Kadir. (2010) [Student Project] (Unpublished)

Comparison of single step annealing, double step annealing and multistep annealing for oxide growth on silicon by using dry oxidation techniques / Muhamad Zaki Abdul Khalik. (2010) [Student Project] (Unpublished)

Temperature dependent of photoluminescence spectroscopy on nanostructured porous silicon / Malissa Abdul Muttalib. (2009) [Student Project] (Unpublished)

Preparation of carbon nanotubes using ethanol precursor by spray pyrolysis / Nur Rashidah Abdul Razak. (2007) [Student Project] (Unpublished)

The tensile strength analysis of kenaf fibre reinforced epoxy composites by using Weibull distribution / Abdul Hakim Abdullah and Razali Hassan. (2014) In: TeSSHI 2014- Technology, Science Social Sciences, Humanities, 5 & 6 Nov 2014, One Hotel Helang, Langkawi Kedah Malaysia.

Flaw inspection of ultrasonic testing by Angle Probes / Halimatun Fazaiana Abdullah. (2010) [Student Project] (Unpublished)

The electrcal characteristics of P-N Junction fabricated on P-Type Silicon wafer by using solid dopant / Mohammad Sollehuddin Abdullah. (2010) [Student Project] (Unpublished)

The characterization of Zinc Oxide thin films prepared by sol gel method with various deposition parameters / Noorfairuzehaniah Abdullah. (2007) [Student Project] (Unpublished)

AIM and ELF bonding analyses of M–O and M–N (Metal= Ba, Y, Zr) in metal–complexes using DFT approach / Nor Ain Fathihah Abdullah, Sharizal Hasan and Lee Sin Ang. (2021) Science Letters (ScL), 15 (1). pp. 90-100. ISSN 2682-8626

The effect of light emission intensity by varying the voltage, current and distance / Mohd Azuandi Adzami. (2013) [Student Project] (Unpublished)

The virtual laboratory (deflection of simply supported beam) / Adia Ewani Affandi and Shilawaty Abdul Mutalif. (2002) [Student Project] (Unpublished)

Optimization of preparation parameters of porous silicon nanostructure / Hartini Ahamad Rafaie. (2006) [Student Project] (Unpublished)

Effect of TiO2 on the electrical properties of hexanoyl chitosan LiClO4 based polymer electrolyte / Mohamad Ridzuan Ahmad. (2010) [Student Project] (Unpublished)

Effect of time on formation Silicon Dioxide layer and characterization / Azliza Ali Yusuf. (2008) [Student Project] (Unpublished)

Computational and characterization studies of non-conjugated poly(nvinylcarbazole) blends as host polymer for phosphorescence emission / Ahmad Nazib Alias. (2014) PhD thesis, thesis, Universiti Teknologi MARA.

Theoretical investigation of the quasi-ring C–H…π interactions / Lee Sin Ang … [et al.]. (2021) Scientific Research Journal, 18 (2): 10. pp. 119-128. ISSN 2289-649X

Microstructural and mechanical properties of welded Ti-15-3 beta titanium alloy using gtaw with boron-modified fillers / Ahmad Lutfi Anis. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Design and development face to face active infrared motion detector for security system / Mohd Shahrul Nizam Asbullah. (2010) [Student Project] (Unpublished)

The effects of language on students' FCI performance / Anis Awaludin. (2013) [Student Project] (Unpublished)

Generation of typical meteorological year weather data of temperature for Klang Valley / Mohd Razani Awang. (2011) [Student Project] (Unpublished)

Characterization of sulphonated polyether ether ketone chitosan membrane for fuel cell / Awangku Noorazlee Awang Bungsu. (2013) [Student Project] (Unpublished)

A short review on synthesis and characterisation of nano SiO2 / TiO2 composite for insulation application / Nurul Farrahani Azlan … [et al.]. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 12. pp. 155-166. ISSN (e-ISSN): 2682-8588

B

First principle calculation on elastic and electronic properties of cubic PBTIO₃ / Fadhlul Wafi Badrudin. (2012) [Student Project] (Unpublished)

Impact of nanoparticle shape on aligned MHD free convection flow of hybrid nanofluid over a vertical plate with convective boundary condition / Nur Hazimah Basir. (2021) [Student Project] (Unpublished)

Lagrangian relaxation method to solve economic dispatch of cogeneration system / Mohd Addri Hariza Borham. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

C

Physically synthesis and characterization of zeolite nanoporous for sodium coated / Nor Azura Che Mahmud. (2012) [Student Project] (Unpublished)

Design,simulation and fabrication of symmetrical Y-junction optical waveguide coupler / Nor Aina Che Manaf. (2011) [Student Project] (Unpublished)

D

Evaluation of internal properties of bamboo particleboard using computerized radiography testing / Abu Bakar Daud. (2012) [Student Project] (Unpublished)

Phase analysis of chromium (III) oxide and aluminium oxide using x-ray diffraction / Surul Huda Din. (2010) [Student Project] (Unpublished)

H

Log periodic dipole antenna performance for solar burst monitoring / Nur Najwa Syuhada Hakimi. (2012) [Student Project] (Unpublished)

Study the characteristics of TDA7000 ic on multiband receiver / Roslan Shaul Hamid. (2013) [Student Project] (Unpublished)

The investigation of fin plate of MiG-29 aircraft made of aluminium alloy D19 using conventional ultrasonic testing (A-Scan System) / Siti Nur Hasanah Hamzah. (2013) [Student Project] (Unpublished)

Thermal behavior of copper oxide and titanium dioxide precursors / Nordiana Hashim. (2010) [Student Project] (Unpublished)

Design and fabrication of optical straight channel waveguide / Hasnormiza Hassan. (2006) [Student Project] (Unpublished)

Preparation and optical characterization of latex nanoparticles / Mohd Hafiz Hassan. (2011) [Student Project] (Unpublished)

Preparation and characterization of aluminum-air battery / Luqman Hakim Hendon. (2008) [Student Project] (Unpublished)

I

The preparation and optimization of CNTs/PVA composite thin film for meld steel coating application / Noor Mohd Ashraf Affendy Ibrahim. (2012) [Student Project] (Unpublished)

Evaluation of effects of different tangential methods on the performance of PID controller (level) / Nur Aminah Idha Yuri. (2023) [Student Project] (Submitted)

Tangential radiography method of large diameter pipes using computed radiography system / Izyana Izhar. (2013) [Student Project] (Unpublished)

J

Influence of mounting height on the operating cell temperature and electrical output of photovoltaic monocrystalline module installed above concrete roof / Noor Alia Jalipen. (2013) [Student Project] (Unpublished)

K

Ab initio study on ferroelectric oxide AT1O3 (A=Sr, Ba, Sn, Pb) by using Density Functional Theory / Khairul Helmy Kamalul Arifin. (2010) [Student Project] (Unpublished)

Electrical properties of MG-30/nanofiller-based polymer electrolytes for lithium batteries / Ainnur-Sherene Kamisan. (2008) [Student Project] (Unpublished)

M

Evaluation of various tuning rules for tuning of pressure process control / Auni Atiqah Majed. (2023) [Student Project] (Submitted)

Failure analysis on woven glass/epoxy composite laminates due to the effect of V-Notch and angle of fiber orientation / Mohamad Mali ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 192-199. ISSN 18235514

Evaluation of various tuning rules for tuning of level process control / Muizzuddin Maslan. (2023) [Student Project] (Submitted)

Investigation of group velocity dispersion and polarization mode dispersion in microstructured silica waveguide / Ahmad Hakim Mazlan. (2011) [Student Project] (Unpublished)

Evaluation of the effects various tangential methods on the performance of flow process control / Muhammad Firdaus Saidatulakmar. (2023) [Student Project] (Submitted)

Study on the effect of oxygen gas pressure on oxide thickness in wet oxidation process / Nur Athirah Md Ya'kob. (2011) [Student Project] (Unpublished)

The optical properties of manganese doped tin oxide synthesized by mechanochemical processing / Fathiah Mod Arifin. (2011) [Student Project] (Unpublished)

Intermetallic growth kinetics of SN-3.5AG solder sandwiched between two copper substrates / Nurfarahin Mohamad Nazri. (2021) [Student Project] (Unpublished)

Effect of Ca substitution on high temperature resistivity of Eu₁₋ₓCaₓBa₂Cu₃O₇₋ᴕ ceramics(x=0.0,0.1,0.5) / Mohamad Shahrizal Mohamad Salleh. (2010) [Student Project] (Unpublished)

1XN symmetrical and asymmetrical optical planar waveguides couplers / Nor Syafiqah Mohamed Kassim. (2012) Masters thesis, thesis, Universiti Teknologi MARA.

The effect of tinted window on daylighting and indoor temperature in building / Putri Nur Amalina Mohd Hanim. (2012) [Student Project] (Unpublished)

Preparation and optimization CNTs using silver nanoparticle catalyst / Norzaini Mohd Kadir. (2011) [Student Project] (Unpublished)

A comparative study for various structures of the P-N junction on silicon (100) wafer / Mohd Ghasani Mohd Maimi. (2011) [Student Project] (Unpublished)

Oxygen sensitive hot spot on ErBa₂Cu₃0₇₋δ ceramics / Mohd Narizee Mohd Nasir. (2006) [Student Project] (Unpublished)

Comparisons between XRD of different ball-milled samples of LiNij.xCoxFey02 and LiNii.xCoxAly02 / Nurdalila Mohd Nazeri. (2012) [Student Project] (Unpublished)

Erbium ytterbium doped waveguide amplifier / Nor Lailatul Hana Mohd Redzwan. (2007) [Student Project] (Unpublished)

Evaluation of the effect of different tangential methods on the performance of PID controller (PRESSURE) / Aina Saffiya Mohd Shahrom. (2023) [Student Project] (Submitted)

Modeling and experimental investigation on double stage single pass erbium-doped fiber amplifier / Siti Nurmaisarah Mohd Subri. (2012) [Student Project] (Unpublished)

Determination of nominal operating cell temperature for photovoltaic modules in tropical Malaysia / Muhamad Mukhzani Muhamad Hanifah. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Wood inspection using digital radiography / Muhammad Haffizal Musa. (2010) [Student Project] (Unpublished)

Effect of substitution of Pr At Eu-SITE on oxygen sensing properties of Eu₁₋ₓPrₓBa2Cu₃0₇₋₆ rods with hot spot / 'Aizzuddeen Mustafa. (2013) [Student Project] (Unpublished)

O

Investigation into the effect of structural change on oxygen sensing properties due to hot spot phenomena of Pr3+ substituted EuCBa^Pr^CusO™ (x = 0.00, 0.05, 0.25, and 0.40) ceramic rods. / Muhamad Faizal Othman. (2013) [Student Project] (Unpublished)

Photoluminescence study of Porous Silicones (PS) doped with Copper (CU) / Nor Ashikin Othman. (2013) [Student Project] (Unpublished)

R

Study the effect of antenna configuration on simple ADS-B receiver / Raja Farahidayu Raja Sulaiman. (2013) [Student Project] (Unpublished)

Evaluation of different tangential methods on the performance of PID controller’s tuning (TEMPERATURE) / Farhana Aqilah Raslan. (2023) [Student Project] (Submitted)

Synthesis and characterization of Fe2O3 by sol-gel method / Noor Hasibah Ridzuan. (2012) [Student Project] (Unpublished)

S

Characterization of nitrogen doped amorphous carbon thin film using natural precursor / Saifullizan Saidon. (2013) [Student Project] (Unpublished)

Activation energy study of intermetallic with the addition of graphene nanosheets into Sn-3.5Ag lead-free solder / Amirah Salleh. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Characteristics study of a simple passive multiband receiver / Mohd Hazrie Samat. (2013) [Student Project] (Unpublished)

Preparation and characterization of chitosan based polymer electrolyte membrane fuel cell / Mohd Faies Samsudin. (2008) [Student Project] (Unpublished)

Preparation and characterization of nanoparticles herb (Centella Asiatica/Gotu Kola) for cosmetics application / Hamidah Saruddin. (2009) [Student Project] (Unpublished)

Structural effects on the electrical transport properties of perovskite La₀․₆₇Ca₀․₃₃MnO₃ with CuO substitution. / Noor Ezati Shuib. (2009) [Student Project] (Unpublished)

Intermetallic growth kinetics for Sn-3.5Ag-0.1Ni solder sandwiched between two copper substrates / Wan Nur Suhaiza Sukri. (2021) [Student Project] (Unpublished)

T

First principles investigations of rotational barrier and hyperfine interactions of muonium in tetraphenylsilane / Pek–Lan Toh ... [et al.]. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

W

Preparation and characterizations textile coated titanium dioxide, Ti02 / Suhaida Wahab. (2011) [Student Project] (Unpublished)

Penggunaan tenaga solar untuk menjanakan sistem penyerapan (penyaman udara) dalam konteks Malaysia / Wan Murzafar Wan Mamat dan Rashdan Hassan. (1991) [Student Project] (Unpublished)

Y

Effects of Prᶟ substitution on oxygen sensing properties of Eu(Ba₁-ₓPrₓ)₂Cu₃0₇₋δ (x = 0.00 - 0.15) ceramic rods using hot spot phenomenon / Nurul Fatehah Yusof. (2013) [Student Project] (Unpublished)

Characterisation of recycled aluminium swarf into fine powder for MIM applications via ball milling / Sarah Balqis Yussoff ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 164-175. ISSN 18235514

Z

Properties of ca doped in non-porous and porous of Y3CaBa4Cu8Oy compared to non-porous and porous of YBa2Cu3Oy ceramics / Zuliana Salmee Zainal Abidin. (2012) [Student Project] (Unpublished)

Ambient factors influencing photovoltaic module temperature in Klang Valley / Hedzlin Zainuddin ... [et al.]. (2016) Science Letters (ScL), 10 (2): 4. pp. 23-25. ISSN (eISSN): 2682-8626

Preparation and characterization of CNTs from palm oil by floated catalyst method / Faizudin Zuberi. (2010) [Student Project] (Unpublished)

This list was generated on Sat Apr 27 19:50:57 2024 UTC.