Items where Subject is "Descriptive and experimental mechanics"

[up]

Library of Congress Subject Areas (1)
- Q Science (1)
  - QC Physics (1)
    - Descriptive and experimental mechanics (93)

Group by: Creators | Item Type

Jump to: Article | Book Section | Conference or Workshop Item | Thesis | Student Project

Number of items at this level: 93.

Article

Pembelajaran efektif menggunakan penunjuk Newton's Free Body Diagram (FBD) / Amin Aadenan … [et al.]. (2018) Jurnal Inovasi Malaysia (JURIM), 2 (1). pp. 61-74. ISSN 2600-7606

AIM and ELF bonding analyses of M–O and M–N (Metal= Ba, Y, Zr) in metal–complexes using DFT approach / Nor Ain Fathihah Abdullah, Sharizal Hasan and Lee Sin Ang. (2021) Science Letters (ScL), 15 (1). pp. 90-100. ISSN 2682-8626

Theoretical investigation of the quasi-ring C–H…π interactions / Lee Sin Ang … [et al.]. (2021) Scientific Research Journal, 18 (2): 10. pp. 119-128. ISSN 2289-649X

A short review on synthesis and characterisation of nano SiO2 / TiO2 composite for insulation application / Nurul Farrahani Azlan … [et al.]. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 12. pp. 155-166. ISSN (e-ISSN): 2682-8588

Failure analysis on woven glass/epoxy composite laminates due to the effect of V-Notch and angle of fiber orientation / Mohamad Mali ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 192-199. ISSN 18235514

Characterisation of recycled aluminium swarf into fine powder for MIM applications via ball milling / Sarah Balqis Yussoff ... [et al.]. (2019) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 164-175. ISSN 18235514

Ambient factors influencing photovoltaic module temperature in Klang Valley / Hedzlin Zainuddin ... [et al.]. (2016) Science Letters (ScL), 10 (2): 4. pp. 23-25. ISSN (eISSN): 2682-8626

Book Section

Performance of particle swarm optimization under different range of direct current motor's moment of inertia / Mohd Azri Abdul Aziz. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 14 (14). Institute of Graduate Studies, UiTM, Shah Alam.

Microstructural and mechanical properties of welded Ti-15-3 beta titanium alloy using gtaw with boron-modified fillers / Ahmad Lutfi Anis. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Conference or Workshop Item

The tensile strength analysis of kenaf fibre reinforced epoxy composites by using Weibull distribution / Abdul Hakim Abdullah and Razali Hassan. (2014) In: TeSSHI 2014- Technology, Science Social Sciences, Humanities, 5 & 6 Nov 2014, One Hotel Helang, Langkawi Kedah Malaysia.

First principles investigations of rotational barrier and hyperfine interactions of muonium in tetraphenylsilane / Pek–Lan Toh ... [et al.]. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Thesis

Derivation of radiative transfer parameters using image-based technique / Wan Noniafida Ab Manan. (2014) Masters thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Computational and characterization studies of non-conjugated poly(nvinylcarbazole) blends as host polymer for phosphorescence emission / Ahmad Nazib Alias. (2014) PhD thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Lagrangian relaxation method to solve economic dispatch of cogeneration system / Mohd Addri Hariza Borham. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM). Digital copy is available in CD Physical copy is available on shelf

1XN symmetrical and asymmetrical optical planar waveguides couplers / Nor Syafiqah Mohamed Kassim. (2012) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal Physical copy is available on shelf

Determination of nominal operating cell temperature for photovoltaic modules in tropical Malaysia / Muhamad Mukhzani Muhamad Hanifah. (2020) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Activation energy study of intermetallic with the addition of graphene nanosheets into Sn-3.5Ag lead-free solder / Amirah Salleh. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Student Project

Temperature dependant of monoethanolamine for carbon nanotubes growth via floating catalyst method / Syahira Farhana Ab Rahman. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Capacity performance of VRLA battery and automotive battery for energy backup in telecommunication access / Nurhayati Abd Halim. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

The thermal comfort of students in air-conditioned lecture rooms / Mohd Redzuan Abd Rahman. (2006) [Student Project] Physical copy is available on shelf (Unpublished)

Processing of LiCo₀₋₉Mn₀₋₁O₂ materials to nano-size using a ball milling method / Noor Hafizah Abdol Wahab. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Correlation between red and blue magnitude of stars in open cluster M34 / Nor Azida Abdul Aziz. (2007) [Student Project] (Unpublished)

Correlation between red and blue magnitude of stars in the open cluster M34 / Nor Azida Abdul Aziz. (2007) [Student Project] Physical copy is available on shelf (Unpublished)

Ring cavity erbium doped fiber laser / Siti Norsabrina Abdul Gaffur. (2006) [Student Project] Physical copy is available on shelf (Unpublished)

Crack detection in welded material by using pulse echo ultrasonic method / Noramyzura Abdul Kadir. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Comparison of single step annealing, double step annealing and multistep annealing for oxide growth on silicon by using dry oxidation techniques / Muhamad Zaki Abdul Khalik. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Temperature dependent of photoluminescence spectroscopy on nanostructured porous silicon / Malissa Abdul Muttalib. (2009) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation of carbon nanotubes using ethanol precursor by spray pyrolysis / Nur Rashidah Abdul Razak. (2007) [Student Project] Physical copy is available on shelf (Unpublished)

Flaw inspection of ultrasonic testing by Angle Probes / Halimatun Fazaiana Abdullah. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

The electrcal characteristics of P-N Junction fabricated on P-Type Silicon wafer by using solid dopant / Mohammad Sollehuddin Abdullah. (2010) [Student Project] Digital copy is available in CD Physical copy is available on shelf (Unpublished)

The characterization of Zinc Oxide thin films prepared by sol gel method with various deposition parameters / Noorfairuzehaniah Abdullah. (2007) [Student Project] Physical copy is available on shelf (Unpublished)

The effect of light emission intensity by varying the voltage, current and distance / Mohd Azuandi Adzami. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The virtual laboratory (deflection of simply supported beam) / Adia Ewani Affandi and Shilawaty Abdul Mutalif. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Optimization of preparation parameters of porous silicon nanostructure / Hartini Ahamad Rafaie. (2006) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of TiO2 on the electrical properties of hexanoyl chitosan LiClO4 based polymer electrolyte / Mohamad Ridzuan Ahmad. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of time on formation Silicon Dioxide layer and characterization / Azliza Ali Yusuf. (2008) [Student Project] Physical copy is available on shelf (Unpublished)

Design and development face to face active infrared motion detector for security system / Mohd Shahrul Nizam Asbullah. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

The effects of language on students' FCI performance / Anis Awaludin. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Generation of typical meteorological year weather data of temperature for Klang Valley / Mohd Razani Awang. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Characterization of sulphonated polyether ether ketone chitosan membrane for fuel cell / Awangku Noorazlee Awang Bungsu. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

First principle calculation on elastic and electronic properties of cubic PBTIO₃ / Fadhlul Wafi Badrudin. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Impact of nanoparticle shape on aligned MHD free convection flow of hybrid nanofluid over a vertical plate with convective boundary condition / Nur Hazimah Basir. (2021) [Student Project] (Unpublished)

Physically synthesis and characterization of zeolite nanoporous for sodium coated / Nor Azura Che Mahmud. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Design,simulation and fabrication of symmetrical Y-junction optical waveguide coupler / Nor Aina Che Manaf. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of internal properties of bamboo particleboard using computerized radiography testing / Abu Bakar Daud. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Phase analysis of chromium (III) oxide and aluminium oxide using x-ray diffraction / Surul Huda Din. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Log periodic dipole antenna performance for solar burst monitoring / Nur Najwa Syuhada Hakimi. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Study the characteristics of TDA7000 ic on multiband receiver / Roslan Shaul Hamid. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

The investigation of fin plate of MiG-29 aircraft made of aluminium alloy D19 using conventional ultrasonic testing (A-Scan System) / Siti Nur Hasanah Hamzah. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Thermal behavior of copper oxide and titanium dioxide precursors / Nordiana Hashim. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Design and fabrication of optical straight channel waveguide / Hasnormiza Hassan. (2006) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and optical characterization of latex nanoparticles / Mohd Hafiz Hassan. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and characterization of aluminum-air battery / Luqman Hakim Hendon. (2008) [Student Project] Physical copy is available on shelf (Unpublished)

The preparation and optimization of CNTs/PVA composite thin film for meld steel coating application / Noor Mohd Ashraf Affendy Ibrahim. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of effects of different tangential methods on the performance of PID controller (level) / Nur Aminah Idha Yuri. (2023) [Student Project] (Submitted)

Tangential radiography method of large diameter pipes using computed radiography system / Izyana Izhar. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Influence of mounting height on the operating cell temperature and electrical output of photovoltaic monocrystalline module installed above concrete roof / Noor Alia Jalipen. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Ab initio study on ferroelectric oxide AT1O3 (A=Sr, Ba, Sn, Pb) by using Density Functional Theory / Khairul Helmy Kamalul Arifin. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Electrical properties of MG-30/nanofiller-based polymer electrolytes for lithium batteries / Ainnur-Sherene Kamisan. (2008) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of various tuning rules for tuning of pressure process control / Auni Atiqah Majed. (2023) [Student Project] (Submitted)

Evaluation of various tuning rules for tuning of level process control / Muizzuddin Maslan. (2023) [Student Project] (Submitted)

Investigation of group velocity dispersion and polarization mode dispersion in microstructured silica waveguide / Ahmad Hakim Mazlan. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of the effects various tangential methods on the performance of flow process control / Muhammad Firdaus Saidatulakmar. (2023) [Student Project] (Submitted)

Study on the effect of oxygen gas pressure on oxide thickness in wet oxidation process / Nur Athirah Md Ya'kob. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

The optical properties of manganese doped tin oxide synthesized by mechanochemical processing / Fathiah Mod Arifin. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Intermetallic growth kinetics of SN-3.5AG solder sandwiched between two copper substrates / Nurfarahin Mohamad Nazri. (2021) [Student Project] Digital copy is downloadable on MyKM Portal (Unpublished)

Effect of Ca substitution on high temperature resistivity of Eu₁₋ₓCaₓBa₂Cu₃O₇₋ᴕ ceramics(x=0.0,0.1,0.5) / Mohamad Shahrizal Mohamad Salleh. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

The effect of tinted window on daylighting and indoor temperature in building / Putri Nur Amalina Mohd Hanim. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and optimization CNTs using silver nanoparticle catalyst / Norzaini Mohd Kadir. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

A comparative study for various structures of the P-N junction on silicon (100) wafer / Mohd Ghasani Mohd Maimi. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Oxygen sensitive hot spot on ErBa₂Cu₃0₇₋δ ceramics / Mohd Narizee Mohd Nasir. (2006) [Student Project] Physical copy is available on shelf (Unpublished)

Comparisons between XRD of different ball-milled samples of LiNij.xCoxFey02 and LiNii.xCoxAly02 / Nurdalila Mohd Nazeri. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Erbium ytterbium doped waveguide amplifier / Nor Lailatul Hana Mohd Redzwan. (2007) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of the effect of different tangential methods on the performance of PID controller (PRESSURE) / Aina Saffiya Mohd Shahrom. (2023) [Student Project] (Submitted)

Modeling and experimental investigation on double stage single pass erbium-doped fiber amplifier / Siti Nurmaisarah Mohd Subri. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Wood inspection using digital radiography / Muhammad Haffizal Musa. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of substitution of Pr At Eu-SITE on oxygen sensing properties of Eu₁₋ₓPrₓBa2Cu₃0₇₋₆ rods with hot spot / 'Aizzuddeen Mustafa. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Investigation into the effect of structural change on oxygen sensing properties due to hot spot phenomena of Pr3+ substituted EuCBa^Pr^CusO™ (x = 0.00, 0.05, 0.25, and 0.40) ceramic rods. / Muhamad Faizal Othman. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Photoluminescence study of Porous Silicones (PS) doped with Copper (CU) / Nor Ashikin Othman. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Study the effect of antenna configuration on simple ADS-B receiver / Raja Farahidayu Raja Sulaiman. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Evaluation of different tangential methods on the performance of PID controller’s tuning (TEMPERATURE) / Farhana Aqilah Raslan. (2023) [Student Project] (Submitted)

Synthesis and characterization of Fe2O3 by sol-gel method / Noor Hasibah Ridzuan. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Characterization of nitrogen doped amorphous carbon thin film using natural precursor / Saifullizan Saidon. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Characteristics study of a simple passive multiband receiver / Mohd Hazrie Samat. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and characterization of chitosan based polymer electrolyte membrane fuel cell / Mohd Faies Samsudin. (2008) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and characterization of nanoparticles herb (Centella Asiatica/Gotu Kola) for cosmetics application / Hamidah Saruddin. (2009) [Student Project] Physical copy is available on shelf (Unpublished)

Structural effects on the electrical transport properties of perovskite La₀․₆₇Ca₀․₃₃MnO₃ with CuO substitution. / Noor Ezati Shuib. (2009) [Student Project] Physical copy is available on shelf (Unpublished)

Intermetallic growth kinetics for Sn-3.5Ag-0.1Ni solder sandwiched between two copper substrates / Wan Nur Suhaiza Sukri. (2021) [Student Project] (Unpublished)

Preparation and characterizations textile coated titanium dioxide, Ti02 / Suhaida Wahab. (2011) [Student Project] Physical copy is available on shelf (Unpublished)

Penggunaan tenaga solar untuk menjanakan sistem penyerapan (penyaman udara) dalam konteks Malaysia / Wan Murzafar Wan Mamat dan Rashdan Hassan. (1991) [Student Project] Physical copy is available on shelf (Unpublished)

Effects of Prᶟ substitution on oxygen sensing properties of Eu(Ba₁-ₓPrₓ)₂Cu₃0₇₋δ (x = 0.00 - 0.15) ceramic rods using hot spot phenomenon / Nurul Fatehah Yusof. (2013) [Student Project] Physical copy is available on shelf (Unpublished)

Properties of ca doped in non-porous and porous of Y3CaBa4Cu8Oy compared to non-porous and porous of YBa2Cu3Oy ceramics / Zuliana Salmee Zainal Abidin. (2012) [Student Project] Physical copy is available on shelf (Unpublished)

Preparation and characterization of CNTs from palm oil by floated catalyst method / Faizudin Zuberi. (2010) [Student Project] Physical copy is available on shelf (Unpublished)

This list was generated on Wed May 1 21:36:36 2024 UTC.