Items where Division is "Faculty of Mechanical Engineering" and Year is 2020

Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | E | H | I | J | K | M | N | O | R | S | T | U | V | W | Y | Z
Number of items: 68.

A

Surface analysis of bio-inspired pistia leaves / Najibah Ab Latif. (2020) PhD thesis, thesis, Universiti Teknologi MARA Shah Alam.

Finger exoskeleton for early acute stroke rehabilitation: control design and performance analysis / Muhammad Naim Abdu Salam. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Investigation on the effect of infiltration parameters to the mechanical performance of biomorphic silicon carbide / Noor Leha Abdul Rahman. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

The effects of different immersion media and temperatures on the compressive behaviour of arenga pinnata - silicone biocomposite / Abdullah Azmin Abdullah Suhaimi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Experimental study on the performance of solar thermoelectric generator / Raihan Abu Bakar. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Experimental electrical characterisation of thermoelectric generator using forced convection water cooling / Raihan Abu Bakar...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 1-16. ISSN 1823-5514 ; 2550-164X

Effects of material and infill density towards adjustable headrest orthosis development based on 3D printing technology / Madya Mastika Ahmad. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah. (2020) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

B

Effect of isobutanol additive in palm oil methyl ester (POME) biodiesel blended fuel on engine performance and emissions of diesel engine / Najmi Haziq Badrulhisam. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

D

Vibration suppression control of three inertial systems / Duong Minh Duc...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 79-91. ISSN 1823-5514 ; 2550-164X

E

Reduction of copper to steel weld ductility for parts in metallurgical equipment / Mohammad E. Matarneh and Nabeel S. Gharaibeh. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 103-114. ISSN 1823-5514 ; 2550-164X

H

Effect of process parameters on surface roughness in HPC drilling of AISI 1055 steel / H.V. Shete and M.S. Sohani. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 33-48. ISSN 1823-5514 ; 2550-164X

Manganese oxide thin film using aerosol assisted chemical vapour deposition (AACVD) technique for solar energy harvesting / Khadijah Hamzah. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Mechanical properties of hybrid graphene nano platelet-nanosilica filled basalt fibre reinforced polymer composites / Ummu Raihanah Hashim. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Design and development of radial arm board / Nabill Hidzir Pauzi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

I

3D finite element method of guided ultrasonic waves on composite plates with impact damage / Noorfaten Asyikin Ibrahim. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

An experimental investigation on thermal behavior and performance of sintered-wick cylindrical heat pipe at steady-state and transient response / Fairosidi Idrus. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Technology Entrepreneurship (ENT600) Training kit / Abdul Zahier Ismail, Muhammad Syafiq khusairi and Mohamad Nizar Mohd Naim. (2020) [Entrepreneurship Project] (Unpublished)

J

Study on Drag Coefficient (CD) value of low-energy prototype class car / J. Jodiputra...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 109-128. ISSN 1823-5514 ; 2550-164X

Formation of Dihydroxystearic Acid (DHSA) from epoxidized palm oleic acid by peracid mechanism and their kinetic study / Mohd Jumain Jalil...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 85-94. ISSN 1823-5514 ; 2550-164X

3D Model of Bone Scaffolds Based on the Mechanical Behaviour for a Hybrid Nano Bio-composites / Jenan, S. Kashan and Saad M. Ali. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 45-67. ISSN 1823-5514 ; 2550-164X

K

Heat transfer of advanced coolant dispersed with hybrid oxides nanoparticles in PEMFC cooling plates / Saifuddin Khalid @ Chik. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

ANFIS model for prediction of performance-emission paradigm of a DICI Engine Fueled with the Blends of Fish Oil Methyl Ester, n-Pentanol and Diesel / Kiran Kumar Billa...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 115-133. ISSN 1823-5514 ; 2550-164X

Effect of carbon nanotube-silane addition on mechanical properties of chloroprene rubber-filled carbon black / Kok-Tee Lau...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 157-167. ISSN 1823-5514 ; 2550-164X

Study on the development of a quaternary layer of B4C-TiB2-Al3Ti-Al in AA7050 / B4C Ex-Situ composite and influence of heat treatment on mechanical and wear properties / Arvind Kumar and Ram Naresh Rai. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 129-139. ISSN 1823-5514 ; 2550-164X

M

Parametric optimization and modeling for flank wear of TiSiN-TiAlN Nanolaminate Cutting Insert / M. Kaladhar. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 69-84. ISSN 1823-5514 ; 2550-164X

Development of a system to control flow of coolant in turning operation / Rajesh Kumar Maurya...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 17-31. ISSN 1823-5514 ; 2550-164X

On the modelling aspect of low-velocity impact composite laminates / M.S. Meon...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 13-25. ISSN 1823-5514 ; 2550-164X

Kinematic analysis on concurrent brake actuator design for dynamically modelled motorcycle / Mahamad Hisyam Mahamad Basri. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Integration of hyperelastic constitutive models in hybrid biomaterial for wound healing application / Nur Nabila Mohd Nazali. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Performance of hollow reinforced concrete beam in structural member / Hamidun Mohd Noh...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 1-11. ISSN 1823-5514 ; 2550-164X

Effects of ethanol additives on spark ignition engine performance and emissions fuelled with methanol-gasoline blends / Mohamad Qayyum Mohd Tamam. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Effect of concentration on extraction of silica from rice husk, rice husk ash and imperata cylindrica via acid leaching treatment / Noratiqah Syahirah Mohd Zarib. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Effect of surface attrition treatment towards the boron diffusivity and wear mechanism of boronized compacted graphite iron / Khalissah Muhammad Yusof. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Surface analysis and biocompatibility of titanium alloy after wire electro-discharge machining (WEDM) / Nornisaadila Musa. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

N

Comparative study on CI engine performance and emissions using a Novel Antioxidant Additive / N Kapilan. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 63-76. ISSN 1823-5514 ; 2550-164X

Experimental study on translation motion characteristics of Moored Symmetrical Semi-submersible in regular waves / Khairuddin, N.M....[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 77-89. ISSN 1823-5514 ; 2550-164X

Removal of Pigment from Textile Wastewater by Electrospun Nanofibre Membrane / Nor Dalila Nor Affand and Nur Najiha Abdul Razak. (2020) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 190-201. ISSN Journal of Mechanical Engineering (JMechE)

Effects of the implant placement to the risk of femoral bone fracture in resurfacing hip arthroplasty / Nor Aiman Nor Izmin. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Design of the MCCIS on the Gas- fueled motorcycle to overcome detonation in engine idling / Didik Nurhadiyanto...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 141-155. ISSN 1823-5514 ; 2550-164X

O

Passive flow control around circular cylinder with uniform and non-uniform perforated shroud cylinder / Mohamad Faiz Osrin. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Optimization of tool life and surface roughness for hypereutectic Al – si alloys in face milling / Kamal Othman...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 27-44. ISSN 1823-5514 ; 2550-164X

R

Finite element analysis of guided ultrasonic waves in fiberglass composite laminates / Amirulaminnur Raheimi. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Honeycomb carbon sandwich composite panel under compressive load flat-wise: experimental analysis / Ramzyzan Ramly...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 13-26. ISSN 1823-5514 ; 2550-164X

Non-radial fiber turbine performance for low pressure turbine via Cfd and experimental (cold flow) / Siti Nor Syazwani Ridzuan. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Influence of process parameters in Wire and Arc Additive Manufacturing (WAAM) process / Nor Ana Rosli...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 69-78. ISSN 1823-5514 ; 2550-164X

ANSYS water-wind flow simulation to study pressure generated under various conditions to generate electricity using piezoelectric cells / Rhitankar Saha Roy...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 1-11. ISSN 1823-5514 ; 2550-164X

S

An introductory CFD analysis study of novel cavity vane driven wind turbine blade design / S.N. Ashwindran... [et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 55-68. ISSN 1823-5514 ; 2550-164X

Fatigue life assessment approaches comparison based on typical welded joint of chassis frame / Maksym Starykov. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 135-156. ISSN 1823-5514 ; 2550-164X

Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

T

Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 131-144. ISSN 1823-5514 ; 2550-164X

U

Memorandum of understanding between Universiti Teknologi MARA and Afridat UG (Haftungsbeschrankt) Germany / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

Memorandum of understanding between Universiti Teknologi MARA and Alam Perkasa Biotech Sdn. Bhd. / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

Memorandum of understanding between Universiti Teknologi MARA and Carbon Tech Global Sdn. Bhd. / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

Memorandum of understanding between Universiti Teknologi MARA and Gaia Plas Berhad / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

Memorandum of understanding between Universiti Teknologi MARA and Management & Science University (MSU) / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

Memorandum of understanding for strategic collaboration between Universiti Teknologi MARA and Gyeongsang National University / Fakulti Kejuruteraan Mekanikal. (2020) UiTM MoU / MoA. (Unpublished)

V

Design and development of the front wheel hub for All-Terrain Vehicle (ATV) / Himanshu Verma...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 49-62. ISSN 1823-5514 ; 2550-164X

W

Analysis of sound transmission loss on perforated-natural fibre sandwich panels / Wei-Hong Tan and Yong-Hooi Ak. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 27-38. ISSN 1823-5514 ; 2550-164X

Y

Spiral toolpath definition and G-code generation for single point incremental forming / Zeradam Yeshiwas and A. Krishniah. (2020) Journal of Mechanical Engineering (JMechE), 17 (1). pp. 91-102. ISSN 1823-5514 ; 2550-164X

Effect of layer arrangement on post impact and open hole tensile properties of kenaf-glass hybrid composite laminates / Syarifah Yunus. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Z

Dynamic characteristics of multi-disk shaft system using the vectors of solution coefficients / Z. Hamdi Cherif and Ch. Kandouci. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 95-115. ISSN 1823-5514 ; 2550-164X

Performance evaluation of thermal barrier coating on heat shield for electrical turbo compounding system / Muhammad Syazani Farhan Zaini. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Integrated quality management model based on TQM, LM, EMS and ENMS for Malaysian automotive company / Argustina Zainuddin. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Flight dynamic stability performance of the baseline-ix blended-wing-body unmanned aerial system using flight simulator / Shahrean Zainurin. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Airflow study of air-cooled chillers installed at different floor level / Nur Faranini Zamri. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

Heat transfer of swirling multi jets impinging system / Amar Zerrout...[et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (2). pp. 93-108. ISSN 1823-5514 ; 2550-164X

Improvement of lower arm assembly suspension part by design of experiment / Muhammad Azfar Zulkipli. (2020) Masters thesis, thesis, Universiti Teknologi MARA.

This list was generated on Mon Jul 15 17:30:37 2024 UTC.