Items where Subject is "Production of electricity by direct energy conversion"

Article

Measurement model of critical success factors for energy management in Malaysia university / Alia Abdullah Saleh. (2018) Malaysian Journal of Sustainable Environment (MySE), 5 (2). pp. 57-78. ISSN 0128-326X

Performance of 4KWp Grid-Connected Photovoltaic (GCPV) system using micro-inverter technology for residential application / Nazreen Baharuddin, Sulaiman Shaari and Nurmalessa Muhammad. (2021) Journal of Academia, 9. pp. 197-209. ISSN 2289-6368

Forecasting electricity demand from daily log sheet with correlated variables / Mohamad Syamim Hilmi … [et al.]. (2020) ESTEEM Academic Journal, 16. pp. 31-41. ISSN 2289-4934

Free vibration analysis of laminated CNTRC plates using the pb2-ritz method / Dang Xuan Hung, Tran Minh Tu and Tran Dai Hao. (2021) Journal of Mechanical Engineering (JMechE), 8 (1). pp. 213-232. ISSN (eISSN):2550-164X

Comparison of ANN performance towards agarwood oil compounds pre-processing based on principal component analysis (PCA) and stepwise regression selection method / Noratikah Zawani Mahabob … [et al.]. (2021) Journal of Electrical and Electronic Systems Research (JEESR), 19: 5. pp. 51-55. ISSN 1985-5389

High voltage transformation ratio using matrix converter / N. Mahendran and Dr. G. Gurusamy. (2010) Journal of Electrical and Electronic Systems Research (JEESR), 3: 9. pp. 73-81. ISSN 1985-5389

Parametric study of heat transfer enhancement using impingement of multiple air jets / Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy. (2010) Journal of Mechanical Engineering (JMechE), 7 (2). pp. 65-79. ISSN 1823-5514 ; 2550-164X

Investigating the effect of machining parameters on EDMed components a RSM approach / Manoj Kumar Pradhan and Chandan Kumar Biswas. (2010) Journal of Mechanical Engineering (JMechE), 7 (1). pp. 47-64. ISSN 1823-5514 ; 2550-164X

Performance of a triboelectric nanogenerator utilising coconut husk layer / Muhammad Aqmal Saparin ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 8. pp. 123-143. ISSN 1823-5514 ; 2550-164X

Book Section

Experimental investigation on the generation of electrical power using gymnasium bicycle / Wan NurMuhammad Wan Mohamed Tarmizi and Hazim Sharudin. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320. ISBN 978-967-0033-18-1

Conference or Workshop Item

Potensi, kerelevenan dan kesediaan sistem fotovoltan (PV) bagi keperluan tenaga elektrik domestik di Malaysia / Syamsyir Akmal Senawi … [et al.]. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Thesis

Design of Artificial Neural Network (ANN) based rotor speed estimator for DC drives / Siti Mutrikah Abd Mokhsin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Active load and loss allocation in transmission line via improved cuckoo search optimization technique / Nur Atiqah Abdul Rahman. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Dc-to dc resonant converter using power MOSFET / Radzaleigh Abdullah. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Identification and classification of voltage disturbances in power quality studies using wavelet - fuzzy method / Ahmad Farid Abidin. (2005) Masters thesis, thesis, Universiti Teknologi MARA.

Single phase inverter for commercial use / Hatta Ariffin. (1996) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Nondestructive and noncontact dielectric measurement methods for low-loss and high-loss liquids using free space microwave measurement system in 8-12.5GHz Frequency range / Mohd Aziz Aris. (2005) Masters thesis, thesis, Universiti Teknologi MARA.

The effect of centrifugation at 5000 rpm on crude palm oil characteristics / Nasrul Syamin Burhanordin. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Enhancement of dielectric properties of PMMA:TiO2 nanocomposite for organic field effect transistors / Lyly Nyl Ismail. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Analysis of brushless DC motor in prototype hydrogen Fuel Cell Electric Vehicle (FCEV) for high efficiency performance at different driving technique / Norhisyam Makmur Ismail. (2015) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Modeling and optimization of thermal energy storage system in Engineering Complex, UiTM Shah Alam / Abdul Hafiz Kassim. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

The development of nanostructured zinc oxide thin films for hybrid solar cell applications / Mohd Firdaus Malek. (2012) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Programmable aqua feeder with automatic power backup / Mohd Fizal Md Azman. (2000) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Constrained MPC of agarwood hydro distillation pot for enhancement in performance and energy consumption / Nurul Nadia Mohammad. (2019) PhD thesis, thesis, Universiti Teknologi MARA.

Study on the effect of film thickness on the conversion efficiency of the tandem solar cell using Silvaco TCAD / Abd Farid Mohd Asannan. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Grey wolf optimizer for solving emission economic dispatch problem / Najlaa Syakirah Rahmat. (2019) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Steam temperature control of hydro-steam distillation process using self-tuning fuzzy fractional-order pi controller / Mazidah Tajjudin. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Synthesis and characterization of aluminium doped LiNi0.6Co0.3Ti0.1O2 cathode material for lithium-ion battery / Wan Aida Hazwani Wan Azizan. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Prototype of generator of wind energy on the car roof top to generate power (mw) / Amar Hanis Yahaya. (2013) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fabrication and characterization of porous silicon by two-step anodization using alternating current photo-assisted electrochemical (ACPEC) etching / Fatimah Zulkifli. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Pico hydro generator / Ahmad Syahmi Abdul Rahim, Nur Hisyam Anuar and Siti Basirah Marzuki. (2012) [Student Project] (Submitted)

Wind turbine generator / Abdul Rauff Abu Rasid, Zahiruddin Norzain and Ahmad Safri Kharuddin. (2015) [Student Project] (Submitted)

Solar energy power (source) / Mohamad Shahrun Azizan and Mohd Azizul Mat Ariff. (2005) [Student Project] (Unpublished)

Solar powered wakaf lamp / Ahmad Bazli Bakri, Fatin Syahirah Abdul Rahim and Ahmad Zulfadhli Ahmad Zamri. (2015) [Student Project] (Submitted)

Portable solar socket / Muhammad Taqiyudin Ghazali, Muhammad Zul Arif Zaidi and Muhammad Hafiz Mohd Salimi. (2013) [Student Project] (Submitted)

The acceptance of flymas.mobi among the citizen of Kota Kinabalu City / Dayang Intan Shaherah Harris. (2011) [Student Project] (Unpublished)

Merekabentuk alat pengering koko khusus untuk pekebun-pekebun kecil menggunakan tenaga matahari / Nor Hisham Hashim and Mahamad Zamri Omar. (1991) [Student Project] (Unpublished)

Smart solar / Mohamad Naim Jamalluddin, Nuramalina Mohd Radzi and Amir Firdaus Mustafa Kamal. (2015) [Student Project] (Submitted)

Fan generator / Mohammad Syazwan Junaidi & Mohamad Naqib Mohd Najib. (2015) [Student Project]

Designing a mini steam power plant as teaching aids / Muhamad Aidil Khairuddin. (2022) [Student Project] (Submitted)

Mini hydrogenerator / Nur Athirah Mahdi, Nur Diyana Ramli and Mohammad Azfar Hakim Mohammad Anuar. (2015) [Student Project] (Unpublished)

DIY hydroponics system by using renewable energy / Muhammad Nazreen Maizuri, Wan Syahir Ilmam Wan Ibrahim and Noor Amira Zuraini Mohd Zulkimi. (2015) [Student Project] (Unpublished)

Sun tracking system for solar panel application/ Mohd Fariz Aizat Mohd Feisoal & Ahmad Afif Abu Bakar. (2015) [Student Project]

Solar photovoltaic garden light / Nur Atiqah Mohd Isnari and Nur Faez Ahmad Tarmizi. (2015) [Student Project] (Unpublished)

Environmental friendly solar car / Muhammad Shafiq Mohd Said & Othman Mohd Said. (2015) [Student Project]

Home power monitoring system / Nik Muhammad Husain Nik Mohd Azahari and Syed Muhammad Nazmin Syed Abdul Aziz. (2019) [Student Project] (Submitted)

Repelling mosquito / Muhamad Dan Darrawi Sadli, Mohd Ierokie Pauzi and Muhamad Adnan Arif A.Rahman. (2015) [Student Project] (Unpublished)

Hydro-electric charger / Mohd Aiman Shafiq Sallehuddin, Mohamad Zahasmie Ahmad Hisham and Syamsul Mohd Jafri. (2015) [Student Project] (Submitted)

Environmental and awareness: single axis solar tracking system / Muhammad Emi Azmel Shohini and Azri Ayoub Izaruddin. (2014) [Student Project] (Submitted)

Entrepreneurship Project

Business Model Canvas : PortaPS / Mohamad Iqram Ab Nasir. (2020) [Entrepreneurship Project] (Unpublished)

Eer Tech Ventures : Eer Power Bank / Muhammad Aidil Akmal Mazlan...[et al.]. (2019) [Entrepreneurship Project] (Unpublished)

Research Reports

Nondestructive and noncontact dielectric measurement methods for transformer oil using free space microwave measurement system in 19 - 25 ghz frequency range / Mohd Aziz Aris ... [et al.]. (2010) [Research Reports] (Unpublished)

Dual elements isolated Magnetic Dipole MIMO Antenna with semi circular slot structure for isolation enhancement / Mohd Aziz Aris...[et al.]. (2020) [Research Reports] (Submitted)

Design and study the effect of contact area on GaAs solar cell by simulation / Nofri Yenita Dahlan, Rosfariza Radzali and Tenku Ahmad Nizam Tenku Putra. (2008) [Research Reports] (Unpublished)

Design of PI controlled battery charger using PFC rectifier for use in dual-tariff PV energy system / Intan Rahayu Ibrahim, Nor Salwa Damanhuri and Mohd Najib Mohd Hussain. (2010) [Research Reports] (Unpublished)

Design and development of a prototype charge controller for a PV-battery-generator hybrid power system / Sulaiman Shaari, Anuar Ahmad and Shahril Irwan Sulaiman. (2006) [Research Reports] (Unpublished)