Items where Division is "Faculty of Chemical Engineering" and Year is 2023

Starch based bioplastic from sweet potato with plasticizer and filler / Muhammad Faren Mohd Kamal. (2023) [Student Project] (Submitted)

Biomass of Chlorella sp. As green corrosion inhibitor for mild steel / Adam Harris Roslan. (2023) [Student Project] (Submitted)

Preparation of starch-based bioplastics from local sweet potato, tapioca and pumpkin with plasticizer and filler / Wan Humaid Wan Hamid. (2023) [Student Project] (Submitted)

Determination of physicochemical properties of soil before and after agricultural mulching process at MMP Fresh Farm, Kedah (Eggplant Farm Area) / Syed Muhammad Naquib Aqimi Syed Shahnaz. (2023) [Student Project] (Submitted)

Determination of plastic pollution and its degradation in soil at banana plantation area / Siti Nur Amanina Mat. (2023) [Student Project] (Submitted)

Dynamic process safety assessment by mapping ALOHA simulation into Bow-tie analysis: application to separator (S-102) in production of methanol route 2 / Nurul Azreen Aziz. (2023) [Student Project] (Submitted)

Development of biochar from coconut shell: pyrolysis process / Nurul Zeti Nabihah Abdul Wahib. (2023) [Student Project] (Submitted)

Determination of plastic pollution and its degradation in soil at mangoes cultivation area / Nurain Samsudin. (2023) [Student Project] (Submitted)

Determination of physochemical properties of soil before and after agricultural activities at AMBS Durian Mas / Nur Syafikah Atirah Khalid. (2023) [Student Project] (Submitted)

Development of biochar from coconut shell: pyrolysis process / Nur Nilam Sari Azini. (2023) [Student Project] (Submitted)

Photodegradation of natural dye to solar energy / Nur Fatin Shazwina Mohd Shamsuri. (2023) [Student Project] (Submitted)

Development of biochar from coconut shell; pyrolisis process / Nur Ariesya Tasneem Azmy. (2023) [Student Project] (Submitted)

Dynamic process safety assessment by mapping ALOHA simulation into BOW-TIE analysis: application to packed bed reactor in production of Methanol Route 2 / Nor Azleen Natasya Az’bey. (2023) [Student Project] (Submitted)

Development of dye-sensitized solar cells with natural dye doped on metal oxide / Ahmad Mazli Azman. (2023) [Student Project] (Submitted)

Photodegradation of natural dye / Muhammad Uwais Addin Muhamad Najibmudin. (2023) [Student Project] (Submitted)

Dynamic process safety assessment by mapping ALOHA simulation into BOW-TIE analysis: application to distillation column in production of Methanol Route 1 / Muhammad Izzat Amir Azmi. (2023) [Student Project] (Submitted)

Development of biochar: pyrolysis from coconut shell / Muhammad Hafiz Firdaus Salnonjunaidi. (2023) [Student Project] (Submitted)

Determination of plastic pollution and its degradation in soil at chili fertigation area / Muhammad Amirul Nazmi Muhammad Alfian. (2023) [Student Project] (Submitted)

Photodegradation of natural dye for solar application / Muhamad Nazirul Ibrahim. (2023) [Student Project] (Submitted)

Determination of soil properties at Bukit Wan, Kuala Terengganu area with and without plantation of rubber tree / Mohamad Amirfirdaus Zulkefli. (2023) [Student Project] (Submitted)

Determination of plastic pollution and its degradation in soil at pineapple cultivation area, okra plantation area, palm oil plantation area and chilli fertigation area / Khaleeda Nora Asyakira Kamarudzaman. (2023) [Student Project] (Submitted)

Preparation of starch based bioplastics from local tapioca with plasticizer and filler / Fatin Eryna Safiah Mohd Jefri. (2023) [Student Project] (Submitted)

Determination of physochemical properties of soil before and after agricultural activities / Azam Saqeef Norazmi. (2023) [Student Project] (Submitted)

Photodegradation extraction of Alpinia galangal with magnesium oxide for solar energy application / Auni Kiasatina Azman. (2023) [Student Project] (Submitted)

Preparation of starch-based bioplastic from local sweet potato with plasticizer and filler / Ainaa’ Nashuha Shahrul Hazaromi. (2023) [Student Project] (Submitted)

Extraction of natural dye from butterfly pea flower to develop dye-sensitized solar cell to doped on magnesium oxide / Muhammad Shazwan Ruslee. (2023) [Student Project] (Submitted)

Evaluation of fertilizer value of residues obtained after processing kitchen waste with Black Soldier Fly (Hermetia Illucens) larvae / Zalwanie Idayu Md Zawawi. (2023) [Student Project] (Submitted)

Tensile properties and thermal analysis of Chlorella algae filled PLA biofilm / Sharifah Diyana Saihah Syed Danial Haris. (2023) [Student Project] (Submitted)

Extraction of natural dye flowers to doped on metal oxide / Shaqyla Tasnim Shaharudy. (2023) [Student Project] (Submitted)

A comparative study of the composting of different organic wastes using black soldier fy larvae (Hermetia illucens) / Nurul Syamimie Sairatulamri. (2023) [Student Project] (Submitted)

Comparison of various closed tuning rules on PID controller performance (LIQUID FLOW) / Nurul Aida Ghani. (2023) [Student Project] (Submitted)

Synthesis of biofilm from Polylactic Acid (PLA) and Green Algae [MORPHOLOGIGAL ANALYSIS OF CHLORELLA] / Nur Zaitiey Shazreen Mohd Zainudin. (2023) [Student Project] (Submitted)

Extraction of natural dye leaves & flowers to dope on metal oxide / Nur Liana Syuhada Noor Hishamsuri. (2023) [Student Project] (Submitted)

Morphological analysis of spirulina algae filled polylactic acid biofilm / Nur Farisha Mohd Adlie. (2023) [Student Project] (Submitted)

Evaluation of effects of different tangential methods on the performance of PID controller (level) / Nur Aminah Idha Yuri. (2023) [Student Project] (Submitted)

Thermal analysis & tensile properties of spirulina algae filled polylactic acid / Nor Amiera Sharweena Shahrulnizam. (2023) [Student Project] (Submitted)

Evaluation of various tuning rules for tuning of level process control / Muizzuddin Maslan. (2023) [Student Project] (Submitted)

Dynamic process safety assessment by mapping ALOHA simulation into Bow-tie analysis: application to distillation column in production of acetic acid / Aiman Alif Bashari. (2023) [Student Project] (Submitted)

Chlorella sp. as green corrosion inhibitor for aluminium in HCL solution / Muhammad Nazrul Mohd Nadzri. (2023) [Student Project] (Submitted)

Evaluation of the effects various tangential methods on the performance of flow process control / Muhammad Firdaus Saidatulakmar. (2023) [Student Project] (Submitted)

Comparative study on composting of single and mixed food waste using black soldier fly larvae (HERMETIA ILLUCENS) / Muhammad Firdaus Saidatulakmar. (2023) [Student Project] (Submitted)

Synthesis of biofilm filled with PLA and Chlorella algae / Muhammad Faiz Fadzel. (2023) [Student Project] (Submitted)

Evaluation of various tuning rules for tuning of temperature process control / Muhammad Haikal A Hasnan. (2023) [Student Project] (Submitted)

The effect of Spirulina sp as green corrosion inhibitors on mild steel in 0.2M sulphuric acid solution / Mohamad Al-Amir Mohamad Sabri. (2023) [Student Project] (Submitted)

The effect of Spirulina sp. as green corrosion inhibitor on mild steel in 0.5M hydrochloric acid solution / Izzah Athirah Izandis. (2023) [Student Project] (Submitted)

Evaluation of different tangential methods on the performance of PID controller’s tuning (TEMPERATURE) / Farhana Aqilah Raslan. (2023) [Student Project] (Submitted)

Evaluation of various tuning rules for tuning of pressure process control / Auni Atiqah Majed. (2023) [Student Project] (Submitted)

Effect of Black Soldier Fly larvae biomass on food waste composting / Amirul Iman Marhaidan. (2023) [Student Project] (Submitted)

Evaluation of the effect of different tangential methods on the performance of PID controller (PRESSURE) / Aina Saffiya Mohd Shahrom. (2023) [Student Project] (Submitted)

Preliminary study on the selection of selfheating elements in self-heating pad / Muhammad Ammar Nasr Ahmad Nasir. (2023) [Student Project] (Submitted)

Self heating element on food-packaging / Wan Muhammad Ihsan Wan Mohammad Nadzim. (2023) [Student Project] (Submitted)

Integration of Bow Tie analysis and ALOHA software for risk and consequences evaluation for liquid-vapor separator (v-100) in production of acetic acid during chemical process development and design / Umi Umaira Afnan Mohd Yasin. (2023) [Student Project] (Submitted)

Development of bioplastic from green algae / Shahida Saad. (2023) [Student Project] (Submitted)

The effect of using different types of polar solvents on the percentage of yield and gallic acid in the piper betel leaves extract / Nurul Nadiha Othman. (2023) [Student Project] (Submitted)

Integration of Bow tie analysis and ALOHA software for risk and consequences evaluation for phase separator in production of methanol route 1 during chemical process development and design / Nurina Aida Mohd Azami. (2023) [Student Project] (Submitted)

Determination of gallic acid using different extraction solvent on Azadirachta indica / Nur Sakinah Noor Azman. (2023) [Student Project] (Submitted)

Determination of gallic acid using different extraction solvents on Azadirachta indica / Nur Saffaaina Balqis Mahadi. (2023) [Student Project] (Submitted)

The effect of using different types of solvent towards the quality of Piper betel crude extract / Nur Farah Izzati Zikri. (2023) [Student Project] (Submitted)

Production of plastic by green algae / Nur Alina Aqila Mazlan. (2023) [Student Project] (Submitted)

The thermal stability of the potassium metal catalyst supported by activated carbon / Nor Ain Natasya Aziz. (2023) [Student Project] (Submitted)

Integration of bow tie analysis and ALOHA software for risk and consequences evaluation for heat exchanger in production of acetic acid during chemical process development and design / Muhammad Zaim Zulhilmi Zamri. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee grounds (SCG) using soxhlet extraction method employing hexane as solvent / A’isyatul Damia Ahmad Sadli@Ahmad Fadli. (2023) [Student Project] (Submitted)

Development of bioplastic from green algae Spirogyra sp / Muhammad Afiq Mohd Azhari. (2023) [Student Project] (Submitted)

Study on the selection of self-heating elements for self-heating pad / Muhammad Mustaqiem Khairul Marwan. (2023) [Student Project] (Submitted)

Transesterification of fatty acid methyl ester using NaOH aqueous catalysts / Muhammad Khairul Nizam Mohd Rodzi. (2023) [Student Project] (Submitted)

The effect of using different extraction technique towards the quality of Piper betel crude extract / Muhammad Hurayth Sabran Mohd Hanafi. (2023) [Student Project] (Submitted)

The thermal stability of sodium (Na) metal supported by activated carbon (Na/AC) catalyst for fatty acid methyl ester production / Muhammad Fikri Nor Azhar. (2023) [Student Project] (Submitted)

Production of fatty acid methyl ester using potassium metal supported on oil palm kernel shell activated carbon / Muhamad Fakhrul Aiman Shahril. (2023) [Student Project] (Submitted)

The effect of using different types of solvents towards quality of Azadirachta Indica crude extract / Irham Mohd Saupi. (2023) [Student Project] (Submitted)

Preliminary study on the selection of self-heating elements in self-heating pad / Hidayatul Husna Hisham. (2023) [Student Project] (Submitted)

Effect of using different drying methods on the chemical composition (gallic acid) in the piper betle leaves extract / Baqtrisha Affrina Mohd Daud Khassetia. (2023) [Student Project] (Submitted)

Effect of using different types of solvent in the extraction of Azadirachta Indica (Neem Leaves) / Aqilah Nur Syafiqah Sarizan. (2023) [Student Project] (Submitted)

Production of bioplastic using green algae / Amirul Banin Riduan. (2023) [Student Project] (Submitted)

The thermal stability of potassium metal catalysts at different carbonization temperature / Muhammad Izzulwafiq Mohd Fadzli. (2023) [Student Project] (Submitted)

Preparation of hydrogel from propolis extract / Siti Sarah Mohd Salleh. (2023) [Student Project] (Submitted)

The thermal stability of sodium metal catalyst supported by activated carbon / Nurzaidatul Adilla Zainal. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee grounds using manual extraction by employing methanol as a solvent / Nurul Khairiah Zawani Kamarudin. (2023) [Student Project] (Submitted)

Preparation of hydrogel from bee pollen extracts / Nurfaizah Mohamed. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee grounds (SCG) using soxhlet extraction employing methanol as solvent / Nur Qistina ‘Aliaa Sukri. (2023) [Student Project] (Submitted)

Preparation of honey-effervescent tablets from bee pollen extracts / Nur Haslinda Abdul Rahman. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee ground (SCG) using hydrous ethanol at different extraction time / Nur Athirah Abdul Khalid. (2023) [Student Project] (Submitted)

Preparation of a kind effervescent tablet with bee propolis extract / Nur Afifah Muda. (2023) [Student Project] (Submitted)

Effect of different formulation on efficiency of honey effervescence tablet / Muhammad Mohd Kaharuddin. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee grounds (SCG) using isopropanol at different extraction time / Muhammad Aidil Amri ‘Asri. (2023) [Student Project] (Submitted)

Heterogenous Na/OPKS for biodiesel production / Muhammad Yusriman Yusoff. (2023) [Student Project] (Submitted)

Integration of Bow-Tie Analysis and ALOHA software for risk and consequences analysis evaluation for heat exchanger during chemical process development and design / Ahmad Affan Haziq Ahmad Haswadi. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee ground (SCG) using soxhlet extraction utilizing ethanol as solvent / Muhammad Haniff Danial Mohd Rozfaizal. (2023) [Student Project] (Submitted)

The effects of pottasium concentration on the percentage yield of fatty acid methyl ester from waste cooking oil / Muhammad Fauwaz Mohamad Saroji. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee grounds (SCG) using soxhlet extraction utilizing isopropanol as solvent / Muhammad Ammar Aqil Muhammad Azian. (2023) [Student Project] (Submitted)

Transesterification of fatty acid methyl ester using KOH aqueous catalysts / Muhammad Aizat Daniel Muhammad Amin. (2023) [Student Project] (Submitted)

Production of fatty acid methyl ester from waste cooking oil by using K metal catalyst supported by oil palm frond (OPF) activated carbon / Muhammad Addam Ramli. (2023) [Student Project] (Submitted)

Preparation of hydrogel with processed honey / Muhamad Afiq Haziq Suharzeli. (2023) [Student Project] (Submitted)

Production of fatty acid methyl ester using potassium metal supported on oil palm kernel shell activated carbon / Maizatul Sofia Muhamad Jihadi. (2023) [Student Project] (Submitted)

Production of fatty acid methyl ester (FAME) using opks and potassium as a heterogenous catalyst / Hanna Abdul Rahim Marican. (2023) [Student Project] (Submitted)

Preparation of honey Effervescent tablet from processed stingless bee's honey / Budris Iskandar. (2023) [Student Project] (Submitted)

Oil extraction from spent coffee ground (SCG) using manual extraction method employing hexane as a solvent / Azimah Salihfudin. (2023) [Student Project] (Submitted)

Preparation of hydrogel from raw stingless bee honey / Amirul Aiman Mohd Abd Fazdil. (2023) [Student Project] (Submitted)