Items where Subject is "Machinery exclusive of prime movers"

[up]

Library of Congress Subject Areas (175)
- T Technology (46)
  - TJ Mechanical engineering and machinery (18)
    - Machinery exclusive of prime movers (69)
      - Belt gearing. Belt transmission (5)
      - Rotors (3)
      - Tribology. Lubrication and friction (11)

Group by: Creators | Item Type

Jump to: Article | Book Section | Thesis | Student Project | Entrepreneurship Project | Research Reports

Number of items at this level: 69.

Article

Effect of fiber misalignment on mechanical and failure response of kenaf composite under compressive loading / M. F. Razali, S.A.H.A. Seman and T. W. Theng. (2021) Journal of Mechanical Engineering (JMechE), 8 (2). pp. 177-191. ISSN (eISSN):2550-164X

Effect of Disc Brake Squeal with Respect to Thickness Variation : Experimental Modal Analysis / R. Samin ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 6 (1). pp. 33-44. ISSN 18235514

Tribological Effects of Additive Hybrid ZrO2/Al2O3 in Bio-Lubrication / Mimi Azlina Abu Bakar ... [et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (6). pp. 35-43. ISSN 18235514

Fine Bone China Product using Ceramics Slip Rotary Moulding (CSRM) Technique / Norazne Nasir ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 31-42. ISSN 18235514

Improvement on the external transmission system of a single-seated open wheel vehicle / Dzullijah Ibrahim. (2017) ESTEEM Academic Journal, 13. pp. 133-145. ISSN 1675-7939

An introductory CFD analysis study of novel cavity vane driven wind turbine blade design / S.N. Ashwindran... [et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 55-68. ISSN 1823-5514 ; 2550-164X

Fault diagnosis in rotating machinery using pattern recognition technique / Nor Azlan Othman, Nor Salwa Damanhuri and Visakan Kadirkamanathan. (2009) ESTEEM Academic Journal, 5 (1). pp. 125-143. ISSN 1675-7939

Book Section

Design and fabrication of a self-balancing device for food delivery / Alif Darwisy Mohd Fauzi, Nur Kamarliah Kamardin and Ahmad Idzwan Yusuf. (2023) In: Prototype Design Collection Series 2. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-320.

Development of an adjustable-motorized wheelbarrow / Muhammad Syahrin Suhaimi and Wan Muhammad Syahmi Wan Fauzi. (2022) In: Prototype Design Collection Series 1. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-15-0

To design and fabricate of an innovative multipurpose hand truck / Muhammad Danish Dzulhelmy and Zeno Michael. (2022) In: Prototype Design Collection Series 1. School of Mechanical Engineering, Universiti Teknologi MARA, Johor, pp. 1-213. ISBN 978-967-0033-15-0

Thesis

Enhancement of the Postura Motergo™ test rig's dynamics / Muhamad Syamim Zainordin. (2015) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Study of windblast interface element with Postura MotergoTM test rig / Shahrool Azree Azlan. (2015) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

The improvements of spark ignition (SI) engine's performance and emissions using different research octane number (RON) gasoline blend with ethanol - methanol / Md. Farid Md. Boizi. (2021) Masters thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Perbandingan terhadap erotan didalam unjuran-unjuran yang digunakan di Semenanjung Malaysia / Muhammad Salim Mohammed Asari. (1991) Advanced Diploma thesis, thesis, Institut Teknologi MARA (ITM).

Optimization and tribological properties of semi metallic friction materials / Aznifa Mahyam Zaharudin. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM). Physical copy is available on shelf

Modelling of drilling operation for measuring speed and feed rate / Ahmad Kazwini Abd. Wahab. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Three dimensional cutting force and tool deflection in micro-end milling AISI D2 / Noor Aniza Norrdin. (2016) Masters thesis, thesis, Universiti Teknologi MARA.

Multi planes balancing of rotating element / Muhammad Zuraidi Mohd Shukri. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Effect of pre-seted residual stress on the spur gear / Alfonso Muze Jerol. (2003) Degree thesis, thesis, Universiti Teknologi MARA.

Automobile brake pad friction and wear test rig: Fabrication / Ismail Mesror. (2005) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Shape optimization of cantilever beam / Hamdan Abd Hamid. (2005) Degree thesis, thesis, Universiti Teknologi MARA.

Evaluation of driving comfort among driver; MYVI 1.3 L (MANUAL) / Mohd Razin Azim Abd Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Emission products analysis on 2 stroke internal combustion engine single powered by hydrogen gas / Ahmad Fazilah Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

An enhancement of energy efficiency based on the voltage reduction with optimal capacitor placement and sizing / Zilaila Zakaria. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM). Physical item is in process

Simulation of chiller water storage / Hafiz Zaim Hussin. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Investigation on the driver's brake application behaviours during emergency braking / Mohamed Heikal Mohamed Saini. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Conceptual design of hydrogen PROTON Exchange Membrane (PEM) fuel cell powered vehicle: power plant / Muhammad Khairi Afiq Mohd Yusof. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is downloadable on MyKM Portal

Experimental study of thrust performance for one-single stage solid rocket propellant / Norafizal Ali Afandi. (2006) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Wear characterization of a diesel engine using Ferrographic technique / Kamarul Azwan Azlan. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

A study of tribological aspects in gearbox of CNG engine / Abdul Hakim Ahmad. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Reverse engineering: 3 kW polymer electrolyte membrane fuel cell for UPS system / Tengku Afiq Nasir Tuan Mohd Hashim. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Experimental aerodynamics of Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) with elevator deflection of +15° and -15° using wind tunnel (Mach number 0.1-0.15) / Wan Mohd Hafizan Wan Razali. (2009) Degree thesis, thesis, Universiti Teknologi MARA. Physical copy is available on shelf

Design of vernier tool for inspection of weldment / Mohd Zulkhafizi Mohd Nor. (2010) Degree thesis, thesis, Universiti Teknologi MARA. Digital copy is available in CD Physical copy is available on shelf

Braking behaviour among motorcyclist: comparison of the rear brake using hand braking type and leg braking type / Mohammad Hamidi Sinin. (2010) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Student Project

A study of a granite crusher plant in Bina Quarry / Nik Mohd Ikrami Ishak and Mohd Sabri Mohamad Zali. (2003) [Student Project] (Unpublished)

Effect of moisture contamination in gear oil lubricant on Yamaha outboard engine performance / Muhammad Haziq Hilmy Ismail. (2022) [Student Project] (Unpublished)

Condition monitoring of bearings using vibrations / Rasyidah Othman and Zuraidi Yusof. (1999) [Student Project] Physical copy is available on shelf (Unpublished)

Effect of oxidation in engine oil lubricant on Yamaha outboard engine performance / Mohamad Ikram Fauzi. (2022) [Student Project] (Submitted)

Effect of oxidation in engine oil lubricant on mercury outboard engine performance / Amir Farhan Abu Bakar. (2022) [Student Project] (Submitted)

Automated guided vehicle (AGV) handling investigation through simulation / Raimi Jamil. (2007) [Student Project] Physical copy is available on shelf

Study on the hydrogen storage properties of NaAlH4 composites using taguchi method / Zarina Omar. (2021) [Student Project] (Unpublished)

Predictive maintenance of air cooled condenser fan gearbox using vibration analysis / Zainal Mathan and Mahani Bahari. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Hydraulic Powered Fan (HPF) / Syarmizar Mohd Safki and Mohd Firdaus Yusof. (2003) [Student Project] (Unpublished)

Kajian dan pengubahsuaian mesin stacker di Syarikat Kotak Malaysia Sendirian Berhad / Azmee Ahmad, Azeze Aziz and Ahmad Dziaudin Mohamed. (1994) [Student Project] Physical copy is available on shelf (Unpublished)

Pengapit gerudi / Abdul Aziz Mohamad. (1991) [Student Project] Physical copy is available on shelf (Unpublished)

Mengubahsuai dan membuat mesin potong rumput / Abdul Malik Nina Mohd, Mohd Azelan Mohd Ali and Wan Rizam Wan Zain. (1989) [Student Project] Physical copy is available on shelf (Unpublished)

A model study on bearing capacity and settlement of single pile in sand / Nik Ahmed Jafni Nik Jaafar. (1990) [Student Project] (Unpublished)

Model railway speed controller / Mohd Nizam Abdul Razak and Shahar Jaafar. (1992) [Student Project] (Unpublished)

Design and fabrication of a self-balancing device for food delivery / Alif Darwisy Mohd Fauzi. (2023) [Student Project] Physical copy is available on shelf (Unpublished)

Penyelidikan penggunaan mesin-mesin moden dalam sektor industri di Malaysia / Azni Zahadi@ Zohdi and Hapiza Akhar Che Daud. (1993) [Student Project] Physical copy is available on shelf (Unpublished)

Merekabentuk jig and fixture bagi cakera brek / Mohammad Rosli Yacob and Ahmad Kamal Abdul Rahman. [Student Project] Physical copy is available on shelf (Unpublished)

Automotive teaching aid with instrumentation for Morris Marina (3L engine part 3) / Azman Mohd Said, Mohamed Noor Baba and Mohd Nasir Ab. Manaf. (1987) [Student Project] Physical copy is available on shelf (Unpublished)

Coriolis component of acceleration apparatus / Mohd. Nazre Mardzuki and Hamdan Ya. (1987) [Student Project] Physical copy is available on shelf (Unpublished)

Demonstration of automatic gearbox II / Mahadi Draman. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Investigation on dynamic motion of four bar chain / Daim Asmizan Shamsudin. (2022) [Student Project] (Submitted)

To investigate and diagnose the engine problems and used it as a study purpose / Abdul Habib Muhamad Fuzi and Ahmad Najib Abu Bakar. (2000) [Student Project] Physical copy is available on shelf (Unpublished)

Radical combustion in two stroke engine / Abdul Rahim Abdul Rahman and Muhamad Suwaid Saad. (1998) [Student Project] Physical copy is available on shelf (Unpublished)

Research of mechanical components of the Malaysian army tank Alvis Scorpion 90 / Razman Marsoff Johar and Wan Zul Atfi Yusmar Wan Yusof. (1999) [Student Project] Physical copy is available on shelf (Unpublished)

Model automatic horizontal bandsaw machine II / Mohammad Mohamed Shariff, Harith Shah Sallehudin and Saiful Adli Aman. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Bearing damage analysis / Md. Asmawi Said and Wan Sadeli Wan Ismail. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

The steering system case study: power assisted steering system / Abdul Hapiz Hj Mohd Taib … [et al.]. (2001) [Student Project] (Unpublished)

Psychrometrics For Shah Alam / Abdul Razak Yaacob and Wan Anyie Jok. (1995) [Student Project] (Unpublished)

A study of an elevator / Mohd Hasrizal Hassan, Mohd Shahril Mamat and Zakari Ismail. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Optimization of brake master production process (gravity die casting) / Muhamad Nor Sharizal Abd Rahman, Mior Shahrulnizam Mior Ahmad and Mohammad Azizi Abdullah. (2001) [Student Project] Physical copy is available on shelf (Unpublished)

Variable Valve Timing / Rahmat Nizam Romzan, Mohd Hezrin Hashim and Norfazizi Razali. (2002) [Student Project] (Unpublished)

Failure analysis on Kriss motorcycle handle locking mechanism / Mackenzie Socret ... [et al.]. (2002) [Student Project] Physical copy is available on shelf (Unpublished)

Development of automatic device for the prediction of next oil change requirement for an automobile / Mustafa Stapah@Salleh. (2017) [Student Project] Physical copy is available on shelf (Submitted)

Entrepreneurship Project

Electro-strip / Muhammad Syakir Kamarul Zaman and Mohd Fazrydeen Yahya. (2017) [Entrepreneurship Project] (Unpublished)

Research Reports

PSSDB load bearing wall with window opening - effect of butt joint in dryboard / Prof Madya Ir. Siti Hawa Hamzah …[et al.]. (2003) [Research Reports] (Unpublished)

This list was generated on Sat Dec 21 23:24:29 2024 UTC.