Items where Subject is "Walls"

Monograph

Brickwall installation / Aqilah Abdullah. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of reinforced concrete and Gabion retaining wall for a proposed of upgrading Kajang Silk Highway from UNITEN Interchange to UPM Interchange / Muhammad Aimi Adzmi. (2015) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Method construction of retaining wall for onsite storm water detention pond (OSD Pond) / Izzah Nur Imanina Ahmad Safawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Civil work : reinforce concrete wall / Ahmed Ikmal Hilmi Ahmed Mustakim. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

UCO solid wall system / Muhammad Azim Anuar. (2015) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Comparison of wall construction between interlocking brick system and conventional system / Badrulmunir Berhan. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Gabion wall installation at Akademi Binaan Malaysia Wilayah Utara Sintok, Kedah / Anis Sofea Ismail. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Wall construction / Nazrul Ikwan Ismail. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Wall construction / Zulkifli Jali. (2012) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Type of bonding in brick wall construction in rugby grand stand Ipoh,Perak / Muhammad Najib Khairul Anuar. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Reinforced concrete wall using steel formwork / Muhamad Khairul Nizam Mahmood. (2019) Industrial Training. Universiti Teknologi MARA, Perak +. (Submitted)

Autoclaved Aerated Concrete (AAC) blocks for wall element at Pejabat Kesihatan Daerah Jeli, Kelantan / Alif Ikmal Mat Izman. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Brick wall construction of single storey house / Muhammad Raif Danish Md. Robyzaquri. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Beam, slab and shear wall construction / Muhammad Abdillah Mohamad Nor. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of shear wall simple formwork system / Muhammad Izzat Mohamad Rahmat. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Load bearing masonry wall construction / Nur Fakhira Mohd Allif Effendy. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Wall finishes (cement plastered finish) / Muhammad Firdaus Mohd Nawawi. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of rubble pitching wall (SRA Sungai Tangkas) / Muhammad Afif Mohd Nor. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

UCO solid wall system / Siti Nur Syafhiqah Mohd Razali. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Wall construction / Muhamad Ikram Mohd Rozy. (2021) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of wall / Mohamad Fakrul Mohd Sok. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Process brickwork at the construction site (wall construction) / Yusrizal Aizat Mohd Yusoff. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of retaining wall at 3 storey house at Tanjung Bungah / Mohd Izham Mohd Zin. (2013) Industrial Training. Universiti Teknologi MARA, Perak. (Unpublished)

Retaining wall / Nur Fatin Azini Mohd Zulkifli. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Wall construction process at Simfoni West Taman Tunku Intan Safinaz / Muhammad Iqbal Zamani Muhamad Narzri. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of starken Autoclaved Aerated Concrete (AAC) block wall / A'fif Rusydan Othman. (2018) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Skim coating / Muhammad Asyraf Othman. (2021) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of RC shear wall / Nur Adha Radhiah Ab Llah. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Construction of brickwork (load-bearing wall) for worker’s quarters / Muhammad Syahmil Afiq Rozzaieman. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Defect on plastering and its method of rectification / Kamil Fahmi Sazili. (2012) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Kaedah pembinaan tembok penahan jenis "cantilever wall" / Muhamad Aliff Shaari. (2009) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Methodology of exterior facade design (wall screening) of a school / Nur Hajidah Shaharudin. (2020) Industrial Training. Universiti Teknologi MARA, Perak. (Unpublished)

Perimeter wall and gate / Tuan Muhammad Afif Husaini Tuan Asmawi. (2019) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Installation of partition wall (non-load bearing wall) / Muhamad Luqman Al-Hakim Zakaria. (2021) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Construction of brick wall / Muhammad Azim Zamaludin. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Retaining wall construction (gabion wall) / Muhamad Nukman Nadir Zolkapli. (2022) Industrial Training. Universiti Teknologi MARA, Perak. (Submitted)

Conference or Workshop Item

Ceramic surface pattern for walls / Nurul Izza Ab Aziz, Azni Hanim Hamzah and Shahidah Abdul Razak. (2012) In: The 9th Regional Symposium of the Malay Archipelago, 11-12 December 2012, Al Khawarizmi Lecture Hall, UiTM Perak.

Istana Besar Tengku Long : wall carving decoration and motifs influences the spatial social interaction at Surung Area / Shamsidar Hj. Ahmad, Mohd. Zafrullah Hj. Mohd. Taib dan Mawar Hj. Masri. (2012) In: The 9th Regional Symposium of the Malay Archipelago, 11-12 December 2012, Al Khawarizmi Lecture Hall, UiTM Perak.

Tools for precast wall panel installation / Muhammad Shamim Ahmad Laili. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Transmogrification partition wall: TransWall / Chilter Mandau and Siti Akhtar Mahayuddin. (2023) In: UNSPECIFIED.

The study of curtain wall paneling installation in Malaysia / Nur Anis Asneeda Mohamed and Norehan Mohd Noor. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Kajian rekabentuk teknik ukiran pada komponen dinding rumah tradisional Terengganu / Normadiana Mohammad Hanapi … [et al.]. (2015) In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu, 4 November 2015, Al-Biruni , UiTM Cawangan Pahang.

Design tool in T&L: RC retaining wall / Mohamad Irwan P. Harahap and Felix Ling. (2020) In: UNSPECIFIED.

Student Project

The effectiveness of barrier wall for residential along highway in Malaysia / Siti Nur Syamimi Ab Karim. (2015) [Student Project] (Unpublished)

Modeling for preliminary analysis of core wall / Noorul Azmah Abdul Aziz. (2006) [Student Project] (Unpublished)

The challenges in choosing cement board IBS concept to reduce the cost of a building compare to the brick wall / Muhammad El-Husairi Abdul Roni. (2021) [Student Project] (Unpublished)

Types of IBS wall system and their challenges & issues / Muhammad Zuhdi Ahmad. (2021) [Student Project]

Wall installation (Caspia 2 – Puncak Iskandar) / Mohd Alif Aiman Azemi. (2016) [Student Project]

Construction of retaining wall for Residential at Bukit Mahkota, Bangi / Muhammad Akmal Azman. (2017) [Student Project]

Painting works (wall) / Faezatul Zurain Farhan. (2021) [Student Project] (Unpublished)

The construction of cast-in-situ reinforced concrete shear wall / Debbie Sophia Henry Bok. (2016) [Student Project] (Unpublished)

Gabion wall installation at Kg Tok Kaya riverbanks / Nur Aina Lylia Husa. (2017) [Student Project] (Unpublished)

Moisture problem in hospital building (focus in ward building, Block 001) / Nazrul Ikwan Ismail. (2016) [Student Project] (Unpublished)

Construction of UCO solid wall / Mohamad ‘Izzuddin Mohamad Taib. (2017) [Student Project]

Construction of retaining rubble wall / Ahmad Shahreezdzakuan Said. (2012) [Student Project] (Submitted)

Brickwall construction of Mahsan Height, Bahau Negeri Sembilan / Nurul Farhana Seeron. (2017) [Student Project] (Unpublished)

Wall construction / Mohd Ajwad Zuhair Elah. (2016) [Student Project] (Unpublished)

Green technology: assessing the potential of green wall development in Malaysia / Farah Najlaa Zulkiffli. (2015) [Student Project] (Unpublished)

Entrepreneurship Project

Advance Construction Technology Enterprise/ Ridhwati @ Noraini Bukhary ... [et al.]. (2003) [Entrepreneurship Project] (Unpublished)

Creative Plaster Ceiling / Felix Moduin ... [et al.]. (2011) [Entrepreneurship Project] (Unpublished)