Items where Subject is "Walls"

A

Ab Aziz, Nurul Izza and Hamzah, Azni Hanim and Abdul Razak, Shahidah (2012) Ceramic surface pattern for walls / Nurul Izza Ab Aziz, Azni Hanim Hamzah and Shahidah Abdul Razak. In: The 9th Regional Symposium of the Malay Archipelago , 11-12 December 2012 , Al Khawarizmi Lecture Hall, UiTM Perak .

Ab Karim, Siti Nur Syamimi (2015) The effectiveness of barrier wall for residential along highway in Malaysia / Siti Nur Syamimi Ab Karim. [Student Project] (Unpublished)

Abdul Aziz, Noorul Azmah (2006) Modeling for preliminary analysis of core wall / Noorul Azmah Abdul Aziz. [Student Project] Faculty of Civil Engineering. (Unpublished)

Abdul Jalal, Nurul Hidayah (2022) Insulated Concrete Forms (ICF): eco fibre concrete wall. [Student Project] (Unpublished)

Abdul Roni, Muhammad El-Husairi (2021) The challenges in choosing cement board IBS concept to reduce the cost of a building compare to the brick wall / Muhammad El-Husairi Abdul Roni. [Student Project] (Unpublished)

Abdullah, Aqilah (2019) Brickwall installation / Aqilah Abdullah. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Adzmi, Muhammad Aimi (2015) Construction of reinforced concrete and Gabion retaining wall for a proposed of upgrading Kajang Silk Highway from UNITEN Interchange to UPM Interchange / Muhammad Aimi Adzmi. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Ahmad, Muhammad Zuhdi (2021) Types of IBS wall system and their challenges & issues / Muhammad Zuhdi Ahmad. [Student Project]

Ahmad, Shamsidar and Mohd. Taib, Mohd. Zafrullah and Masri, Mawar (2012) Istana Besar Tengku Long : wall carving decoration and motifs influences the spatial social interaction at Surung Area / Shamsidar Hj. Ahmad, Mohd. Zafrullah Hj. Mohd. Taib dan Mawar Hj. Masri. In: The 9th Regional Symposium of the Malay Archipelago , 11-12 December 2012 , Al Khawarizmi Lecture Hall, UiTM Perak .

Ahmad Laili, Muhammad Shamim (2019) Tools for precast wall panel installation / Muhammad Shamim Ahmad Laili. In: 4th Undergraduate Seminar on Built Environment and Technology 2019 , 12th June 2019 , Universiti Teknologi Mara Perak Branch .

Ahmad Safawi, Izzah Nur Imanina (2019) Method construction of retaining wall for onsite storm water detention pond (OSD Pond) / Izzah Nur Imanina Ahmad Safawi. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Ahmed Mustakim, Ahmed Ikmal Hilmi (2016) Civil work : reinforce concrete wall / Ahmed Ikmal Hilmi Ahmed Mustakim. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Akmal Hisham, Muhammad Aiman (2022) Precast eco wall with sound insulation. [Student Project] (Unpublished)

Anuar, Izzat and Ismail, Sallehan and Saleh, Ani Maslina (2025) Hybrid fibre breeze block: a sustainable and lightweight innovation for modern construction. In: E-proceedings of international tinker innovation & entrepreneurship challenge (i-TIEC 2025).. International Tinker Innovation & Entrepreneurship Challenge (2nd) . Universiti Teknologi MARA Cawangan Johor Kampus Pasir Gudang , Universiti Teknologi MARA, Johor , pp. 172-177 . ISBN 978-967-0033-34-1.

Anuar, Muhammad Azim (2015) UCO solid wall system / Muhammad Azim Anuar. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Arman, Muhammad Afiq (2022) Integrated displacement ventilation system precast wall. [Student Project] (Unpublished)

Asrul Nizam, Muhammad Aidil Muzairin (2019) Wall construction for housing project. Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

Azemi, Mohd Alif Aiman (2016) Wall installation (Caspia 2 – Puncak Iskandar) / Mohd Alif Aiman Azemi. [Student Project]

Azman, Muhammad Akmal (2017) Construction of retaining wall for Residential at Bukit Mahkota, Bangi / Muhammad Akmal Azman. [Student Project]

B

Berhan, Badrulmunir (2018) Comparison of wall construction between interlocking brick system and conventional system / Badrulmunir Berhan. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Bukhary, Ridhwati @ Noraini and Abu Seman, Fazliyana and Aziz, Siti Noor Jusmila and Azemi, Norzihan (2003) Advance Construction Technology Enterprise/ Ridhwati @ Noraini Bukhary ... [et al.]. [Entrepreneurship Project] (Unpublished)

F

Farhan, Faezatul Zurain (2021) Painting works (wall) / Faezatul Zurain Farhan. [Student Project] (Unpublished)

Fauzi, Fatin Nadzirah (2022) Wood fiber glass cement board. [Student Project] (Unpublished)

H

Henry Bok, Debbie Sophia (2016) The construction of cast-in-situ reinforced concrete shear wall / Debbie Sophia Henry Bok. [Student Project] (Unpublished)

Husa, Nur Aina Iylia (2017) Gabion wall installation at Kg Tok Kaya riverbanks / Nur Aina Lylia Husa. [Student Project] (Unpublished)

I

Ismail, Anis Sofea (2018) Gabion wall installation at Akademi Binaan Malaysia Wilayah Utara Sintok, Kedah / Anis Sofea Ismail. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Ismail, Nazrul Ikwan (2016) Moisture problem in hospital building (focus in ward building, Block 001) / Nazrul Ikwan Ismail. [Student Project] (Unpublished)

Ismail, Nazrul Ikwan (2014) Wall construction / Nazrul Ikwan Ismail. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

J

Jali, Zulkifli (2012) Wall construction / Zulkifli Jali. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

K

Khairul Anuar, Muhammad Najib (2018) Type of bonding in brick wall construction in rugby grand stand Ipoh,Perak / Muhammad Najib Khairul Anuar. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

M

Mahmood, uhamad Khairul Nizam (2019) Reinforced concrete wall using steel formwork / Muhamad Khairul Nizam Mahmood. Industrial Training. Universiti Teknologi MARA, Perak + . (Submitted)

Mandau, Chilter and Mahayuddin, Siti Akhtar (2023) Transmogrification partition wall: TransWall / Chilter Mandau and Siti Akhtar Mahayuddin. In: .

Mat Izman, Alif Ikmal (2019) Autoclaved Aerated Concrete (AAC) blocks for wall element at Pejabat Kesihatan Daerah Jeli, Kelantan / Alif Ikmal Mat Izman. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Md. Robyzaquri, Muhammad Raif Danish (2022) Brick wall construction of single storey house / Muhammad Raif Danish Md. Robyzaquri. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Moduin, Felix and Aziz, Azirah and Maun, Mohd. Saiful and Abu Bakar, NorShatilla Ezanie (2011) Creative Plaster Ceiling / Felix Moduin ... [et al.]. [Entrepreneurship Project] (Unpublished)

Mohamad Nor, Muhammad Abdillah (2019) Beam, slab and shear wall construction / Muhammad Abdillah Mohamad Nor. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohamad Rahmat, Muhammad Izzat (2022) Construction of shear wall simple formwork system / Muhammad Izzat Mohamad Rahmat. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohamad Taib, Mohamad ‘Izzuddin (2017) Construction of UCO solid wall / Mohamad ‘Izzuddin Mohamad Taib. [Student Project]

Mohamad Zawavi, Siti Nurzahidah (2022) The impacts of structural wall defects occur in the building. [Student Project] (Unpublished)

Mohamed, Nur Anis Asneeda and Mohd Noor, Norehan (2019) The study of curtain wall paneling installation in Malaysia / Nur Anis Asneeda Mohamed and Norehan Mohd Noor. In: 4th Undergraduate Seminar on Built Environment and Technology 2019 , 12th June 2019 , Universiti Teknologi Mara Perak Branch .

Mohammad Effendy, Nurul Fatinhah (2022) Autoclaved aerated concrete wall by using polycarboxylate superplasticizers. [Student Project] (Unpublished)

Mohammad Hanapi, Normadiana and Mohd Kamal, Mohd Mawardi and Nordin, Noli Maishara and Yaccob, Ahmad Amzari (2015) Kajian rekabentuk teknik ukiran pada komponen dinding rumah tradisional Terengganu / Normadiana Mohammad Hanapi … [et al.]. In: KONAKA Konferensi Akademik 2015 Pelestarian Warisan Melayu Pencetus Penambahan Ilmu , 4 November 2015 , Al-Biruni , UiTM Cawangan Pahang .

Mohd Allif Effendy, Nur Fakhira (2019) Load bearing masonry wall construction / Nur Fakhira Mohd Allif Effendy. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohd Nawawi, Muhammad Firdaus (2022) Wall finishes (cement plastered finish) / Muhammad Firdaus Mohd Nawawi. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohd Nor, Muhammad Afif (2014) Construction of rubble pitching wall (SRA Sungai Tangkas) / Muhammad Afif Mohd Nor. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Mohd Razali, Siti Nur Syafhiqah (2016) UCO solid wall system / Siti Nur Syafhiqah Mohd Razali. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

Mohd Rozy, Muhamad Ikram (2021) Wall construction / Muhamad Ikram Mohd Rozy. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohd Sok, Mohamad Fakrul (2016) Construction of wall / Mohamad Fakrul Mohd Sok. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak .

Mohd Yusoff, Yusrizal Aizat (2019) Process brickwork at the construction site (wall construction) / Yusrizal Aizat Mohd Yusoff. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Mohd Zin, Mohd Izham (2013) Installation of retaining wall at 3 storey house at Tanjung Bungah / Mohd Izham Mohd Zin. Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

Mohd Zulkifli, Nur Fatin Azini (2019) Retaining wall / Nur Fatin Azini Mohd Zulkifli. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Muhamad Narzri, Muhammad Iqbal Zamani (2022) Wall construction process at Simfoni West Taman Tunku Intan Safinaz / Muhammad Iqbal Zamani Muhamad Narzri. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

N

Nor Azman, Ahmad Danial (2024) Environmental friendly wall cladding. [Student Project] (Unpublished)

O

Othman, A'fif Rusydan (2018) Installation of starken Autoclaved Aerated Concrete (AAC) block wall / A'fif Rusydan Othman. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Othman, Muhammad Asyraf (2021) Skim coating / Muhammad Asyraf Othman. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

P

P. Harahap, Mohamad Irwan and Ling, Felix (2020) Design tool in T&L: RC retaining wall / Mohamad Irwan P. Harahap and Felix Ling. In: .

R

Radhiah Ab Llah, Nur Adha (2014) Construction of RC shear wall / Nur Adha Radhiah Ab Llah. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Rozzaieman, Muhammad Syahmil Afiq (2022) Construction of brickwork (load-bearing wall) for worker’s quarters / Muhammad Syahmil Afiq Rozzaieman. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

S

Sadali, Muhammad Afif (2021) Construction of sidewalk. Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

Said, Ahmad Shahreezdzakuan (2012) Construction of retaining rubble wall / Ahmad Shahreezdzakuan Said. [Student Project] (Submitted)

Sazili, Kamil Fahmi (2012) Defect on plastering and its method of rectification / Kamil Fahmi Sazili. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Seeron, Nurul Farhana (2017) Brickwall construction of Mahsan Height, Bahau Negeri Sembilan / Nurul Farhana Seeron. [Student Project] (Unpublished)

Shaari, Muhamad Aliff (2009) Kaedah pembinaan tembok penahan jenis "cantilever wall" / Muhamad Aliff Shaari. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Shaharudin, Nur Hajidah (2020) Methodology of exterior facade design (wall screening) of a school / Nur Hajidah Shaharudin. Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

T

Tambunan, Lily and Widyowijatnoko, Andry (2024) Utilization of plastered-bamboo for postdisaster residential wall construction: a study on cost efficiency compared to masonry wall. In: Proceedings International Symposium Nusantara XIV Simpora XIV : 2023 , October , Universiti Teknologi MARA, Perak .

Tuan Asmawi, Tuan Muhammad Afif Husaini (2019) Perimeter wall and gate / Tuan Muhammad Afif Husaini Tuan Asmawi. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Y

Yusup, Adhwa Fadhlin (2019) Construction of party wall. Industrial Training. Universiti Teknologi MARA, Perak . (Unpublished)

Z

Zainol, Zulhilman Haikal (2022) Wall-e: wall painting robotic with development of a high transfer efficiency painting technology for wall finishes. [Student Project] (Unpublished)

Zakaria, Muhamad Luqman Al-Hakim (2021) Installation of partition wall (non-load bearing wall) / Muhamad Luqman Al-Hakim Zakaria. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Zamaludin, Muhammad Azim (2016) Construction of brick wall / Muhammad Azim Zamaludin. Industrial Training. Universiti Teknologi Mara, Perak , Seri Iskandar, Perak . (Unpublished)

Zolkapli, Muhamad Nukman Nadir (2022) Retaining wall construction (gabion wall) / Muhamad Nukman Nadir Zolkapli. Industrial Training. Universiti Teknologi MARA, Perak . (Submitted)

Zuhair Elah, Mohd Ajwad (2016) Wall construction / Mohd Ajwad Zuhair Elah. [Student Project] (Unpublished)

Zulkiffli, Farah Najlaa (2015) Green technology: assessing the potential of green wall development in Malaysia / Farah Najlaa Zulkiffli. [Student Project] Faculty of Architecture, Planning and Surveying. (Unpublished)