Items where Subject is "Specific structural forms, analysis, and design"

Book Section

Omar, Zamali and Po'a, Ayu Wirdawati and Mohd Rizal Chu, Siti Marlinna Chu (2012) Bending and cutting links hand tools / Zamali Omar, Ayu Wirdawati Po'a and Siti Marlinna Chu Mohd Rizal Chu. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 48.

Monograph

Abd Rahman, Nur Aliaa (2014) Superstructure construction of Adabi’s factory building at Padang Tembak Pengkalan Chepa, Kota Bharu, Kelantan / Nur Aliaa Abd Rahman. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Azemi, Nur Amanina (2014) The construction method for super structure / Nur Amanina Azemi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Bahrim, Syazlin Azwani (2017) Construction of reinforcement concrete for floor and slab / Syazlin Azwani Bahrim. (2017) Industrial Training. Universiti Teknologi Mara, Perak, 2017. (Unpublished)

Mat Ropi, Mohd Safiq Aizat (2014) Method statement of groundbeam (temporary formwork) at Maktab Rendah Sains Mara (MRSM) Besut, Terengganu / Mohd Safiq Aizat Mat Ropi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Mohd Nafi, Muhammad Aniq Hilmie (2018) Method statement for substructure / Muhammad Aniq Hilmie Mohd Nafi. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Mohd Razali, Siti Nur Syafhiqah (2016) UCO solid wall system / Siti Nur Syafhiqah Mohd Razali. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Mohd Sok, Mohamad Fakrul (2016) Construction of wall / Mohamad Fakrul Mohd Sok. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Muhammad Rusli, Mohamad Asroy Nizam (2014) The contsruction of super structure (column and beam) at Clinic Cure and Care, Seri Iskandar, Perak / Mohamad Asroy Nizam Muhammad Rusli. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Muszaide, Aina Marina (2018) Structure strengthening test / Aina Marina Muszaide. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Nasir, Amirul Hafiz (2016) Balai Bomba dan Penyelamat Pagoh Muar Johor / Amirul Hafiz Nasir. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Wira, Muhammad Irfan Hakimi (2016) Building condition assessment : PWD Quarters Jalan Bruseh / Muhammad Irfan Hakimi Wira. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Conference or Workshop Item

Mohamad Suki, Nurdayana and Wan Zaharuddin, Wan Akmal Zahri (2019) Augmented Reality (AR) glasses for inspection of steel formwork system / Nurdayana Mohamad Suki and Wan Akmal Zahri Wan Zaharuddin. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Othman, Akbar and Ismail, Al Emran (2012) Finite element simulation modeling of axial dynamic energy absorption on conical titanium alloy / Akbar Othman and Al Emran Ismail. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

Thesis

Wahijan, Omar (1999) Effect of gap infront the finger tip on tensile strength of finger joint / Omar Wahijan. (1999) Degree thesis, thesis, Universiti Teknologi MARA, Pulau Pinang.

Student Project

Abd Kadir, Aliyah Natasha (2021) The construction of superstructure / Aliyah Natasha Abd Kadir. (2021) [Student Project] (Unpublished)

Abd Razak, Mohd Azman (2005) A study on concrete discontinuity / Mohd Azman Abd Razak. (2005) [Student Project] (Unpublished)

Abu Samah, Rosiah (1995) Stress concentration factors on glued joints of timber/ Rosiah Abu Samah. (1995) [Student Project] (Unpublished)

Ahmad Dawam, Muhammad Hafeez and Rozali, Ali Imran and Nizam, Jas Mohd Shamir and Abd Rahim, Muhammad Nazmi Amzar and Mohd Khairil, Nur Irdina Multipurpose portable ramp / Muhammad Hafeez Ahmad Dawam ...[et al.]. [Student Project]

Akmal, Muhammad Al Ikram (2022) Design and fabrication of foldable house stairs / Muhammad Al Ikram Akmal. (2022) [Student Project] (Unpublished)

Atan, Edid Azhar (2006) Structure analysis of cable stayed footbridge (simulation and modelling) design and calculation / Edid Azhar Atan. (2006) [Student Project] (Unpublished)

Azahar, Muhammad Hafiz Haikal (2022) Simulation of a flow over a mound-type breakwater of different surface roughness using computational approach / Muhammad Hafiz Haikal Azahar. (2022) [Student Project] (Submitted)

Azhar, Ahmad Alif Qayyum (2022) Vibration reduction of mechanical structure using tuned mass damper / Ahmad Alif Qayyum Azhar. (2022) [Student Project] (Submitted)

Che Ramli, Che Na'im Najmi (2024) Hull design and stability analyses of a jet ski boat attachment / Che Na'im Najmi Che Ramli. (2024) [Student Project] (Unpublished)

Fauzi, Mohamad Fathi Anas (2023) Structure design and strength analysis glass reinforced plastic of catamaran mini houseboat / Mohamad Fathi Anas Fauzi. (2023) [Student Project] (Unpublished)

Ibrahim, Azmi (1986) Computer aided design of simply supported, Class 1, prestressed post-tensioned concrete beam with effective bond, in accordance with BS 5400 : 1978 / Azmi Ibrahim. (1986) [Student Project] (Unpublished)

Ibrahim, Marzuki (1998) Stress analysis of finger joint subjected to tensile loading / Marzuki Ibrahim. (1998) [Student Project] (Unpublished)

Jamal, Muhammad Haikal Daniel (2022) Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. (2022) [Student Project] (Unpublished)

Jamaluddin, Arshad (1996) Efficiencies of finger joint of Light Red Meranti (experimental work) / Arshad Jamaluddin. (1996) [Student Project] (Unpublished)

Jamaludin, Muhammad Farhan Haikal (2022) Hull design and stability analysis of rigid tube rib / Muhammad Farhan Haikal Jamaludin. (2022) [Student Project] (Unpublished)

Johari, Muhammad Harith Iqmal and Zulkarnain, Muhamad Ilman Nafis and Mohd Zamari, Muhammad Alif Syahmi and Husin, Amirul Anwar (2021) Multipurpose table report / Muhammad Harith Iqmal Johari... [et al.]. (2021) [Student Project] (Submitted)

Kadir, Mohd Hafiz (2007) Analysis of shear wall structure in Pulau Pinang due to wind load and long distance Sumatran earthquake in terms of stiffness of the building / Mohd Hafiz Kadir. (2007) [Student Project] (Unpublished)

Maspade, Asri (2006) A study on the behaviour of lift core in highrise / Asri Maspade. (2006) [Student Project] (Unpublished)

Mat Nasir, Muhammad Naufal Asyraf (2022) Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir. (2022) [Student Project] (Unpublished)

Mohamad, Mohd Junaidi (2006) Behaviour of reinfoced concrete beam with silica fume under static loading / Mohd Junaidi Mohamad. (2006) [Student Project] (Unpublished)

Mohd Abdillah, Muhammad Hanif (2022) A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. (2022) [Student Project] (Submitted)

Mohd Hasseri, Mohd Allias (2002) Effect of geometrical properties of finger joint on the bending strength of timber (profile ii) / Mohd Allias Mohd Hasseri. (2002) [Student Project] (Unpublished)

Mohd Nazrie, Muhammad Nazmi (2022) Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. (2022) [Student Project] (Unpublished)

Mohd Shahrul Munir, Mohamad Faiz (2022) Fabrication of miniature foldable storage rack / Mohamad Faiz Mohd Shahrul Munir. (2022) [Student Project] (Unpublished)

Mohd Zakaria, Muhammad Hariz (2025) Production development of traditional Malay boat for tourism / Muhammad Hariz Mohd Zakaria. (2025) [Student Project] (Unpublished)

Mohmmed Haasan, Mohd Khairulnizam (2007) Study on basement and shear wall response by using FEM / Mohd Khairulnizam Mohmmed Haasan. (2007) [Student Project] (Unpublished)

Muhd Yusoff, Mohammad Yushaiman Habib and Wan Zakaria, Wan Mohamad Fahmi and Lokman @ Nejib, Muhammad Arash Mifzal and Izaudin, Muhammad Hasif Fitri and Muhammad Hilmi, Ahmad Haiqal Fikri (2021) Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. (2021) [Student Project] (Submitted)

Nazri, Muhammad Khairul Nazmi (2022) Structural design and analysis of solar boat / Muhammad Khairul Nazmi Nazri. (2022) [Student Project] (Unpublished)

Noor Heryman, Nur Ain Jannah (2022) Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)

Nor Hizulmy, Nur Fakhira Batrisya (2022) Feasibility study on installing solar water heater in single cafeteria / Nur Fakhira Batrisya Nor Hizulmy. (2022) [Student Project] (Submitted)

Omar, Norizah (1995) Efficiency of glued finger joint / Norizah Omar. (1995) [Student Project] (Unpublished)

Openg, Iskanda (1997) Finite element analysis of finger joint / Iskanda Openg. (1997) [Student Project] (Unpublished)

Roslan, Muhammad Azri Faiz (2022) Structure design and analysis of GRP Payang boat / Muhammad Azri Faiz Roslan. (2022) [Student Project] (Unpublished)

Sudin, Muhammad Syaifulnizam (2022) Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. (2022) [Student Project] (Unpublished)

Suib, Shamsiah (2002) Effect of geometrical size on the tensile strength of finger joint / Shamsiah Suib. (2002) [Student Project] (Unpublished)

Wan Shamsuddin, Wan Muhammad Azam Idrus (2022) Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. (2022) [Student Project] (Submitted)

Ya, Mohammad Syafiruddin (2023) Structure design and strength analysis of GRP swath passenger boat / Mohammad Syafiruddin Ya. (2023) [Student Project] (Unpublished)

Zakaria, Muhammad Amirul (2022) Production design rigid tube rib / Muhammad Amirul Zakaria. (2022) [Student Project] (Unpublished)

Zulkffli, Harith Asyran (2022) Simulation of a flow over a underwater pillar of different surface roughness using computational approach / Harith Asyran Zulkffli. (2022) [Student Project] (Submitted)

Research Reports

Ahmad Zakwan, Fariz Aswan and Ismail, Ruqayyah and Ismail, Badrul Nizam (2011) Geotechnical finite element analysis of diaphragm wall construction / Fariz Aswan Ahmad Zakwan, Ruqayyah Ismail and Badrul Nizam Ismail. (2011) [Research Reports] (Unpublished)

Lim, Jit Kheng and Ng, Wen Kuan and Ahmad @ Majid, Mohd Farid (2006) Study of prebored precast pile system - a qualitative approach / Lim Jit Kheng, Ng Wen Kuan and Mohd Farid Ahmad @ Majid. (2006) [Research Reports] (Unpublished)

Petrus, Clotilda and Nyuin, Joe Davylyn (2009) The behaviour of concrete filled thin walled steel column under concentric load / Clotilda Petrus and Joe Davylyn Nyuin. (2009) [Research Reports] (Unpublished)