Items where Subject is "Specific structural forms, analysis, and design"

A

Abd Kadir, Aliyah Natasha (2021) The construction of superstructure / Aliyah Natasha Abd Kadir. (2021) [Student Project] (Unpublished)

Abd Rahman, Nur Aliaa (2014) Superstructure construction of Adabi’s factory building at Padang Tembak Pengkalan Chepa, Kota Bharu, Kelantan / Nur Aliaa Abd Rahman. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Abd Razak, Mohd Azman (2005) A study on concrete discontinuity / Mohd Azman Abd Razak. (2005) [Student Project] (Unpublished)

Abu Samah, Rosiah (1995) Stress concentration factors on glued joints of timber/ Rosiah Abu Samah. (1995) [Student Project] (Unpublished)

Ahmad Dawam, Muhammad Hafeez and Rozali, Ali Imran and Nizam, Jas Mohd Shamir and Abd Rahim, Muhammad Nazmi Amzar and Mohd Khairil, Nur Irdina Multipurpose portable ramp / Muhammad Hafeez Ahmad Dawam ...[et al.]. [Student Project]

Ahmad Zakwan, Fariz Aswan and Ismail, Ruqayyah and Ismail, Badrul Nizam (2011) Geotechnical finite element analysis of diaphragm wall construction / Fariz Aswan Ahmad Zakwan, Ruqayyah Ismail and Badrul Nizam Ismail. (2011) [Research Reports] (Unpublished)

Akmal, Muhammad Al Ikram (2022) Design and fabrication of foldable house stairs / Muhammad Al Ikram Akmal. (2022) [Student Project] (Unpublished)

Atan, Edid Azhar (2006) Structure analysis of cable stayed footbridge (simulation and modelling) design and calculation / Edid Azhar Atan. (2006) [Student Project] (Unpublished)

Azahar, Muhammad Hafiz Haikal (2022) Simulation of a flow over a mound-type breakwater of different surface roughness using computational approach / Muhammad Hafiz Haikal Azahar. (2022) [Student Project] (Submitted)

Azemi, Nur Amanina (2014) The construction method for super structure / Nur Amanina Azemi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Azhar, Ahmad Alif Qayyum (2022) Vibration reduction of mechanical structure using tuned mass damper / Ahmad Alif Qayyum Azhar. (2022) [Student Project] (Submitted)

B

Bahrim, Syazlin Azwani (2017) Construction of reinforcement concrete for floor and slab / Syazlin Azwani Bahrim. (2017) Industrial Training. Universiti Teknologi Mara, Perak, 2017. (Unpublished)

C

Che Ramli, Che Na'im Najmi (2024) Hull design and stability analyses of a jet ski boat attachment / Che Na'im Najmi Che Ramli. (2024) [Student Project] (Unpublished)

F

Fauzi, Mohamad Fathi Anas (2023) Structure design and strength analysis glass reinforced plastic of catamaran mini houseboat / Mohamad Fathi Anas Fauzi. (2023) [Student Project] (Unpublished)

I

Ibrahim, Azmi (1986) Computer aided design of simply supported, Class 1, prestressed post-tensioned concrete beam with effective bond, in accordance with BS 5400 : 1978 / Azmi Ibrahim. (1986) [Student Project] (Unpublished)

Ibrahim, Marzuki (1998) Stress analysis of finger joint subjected to tensile loading / Marzuki Ibrahim. (1998) [Student Project] (Unpublished)

J

Jamal, Muhammad Haikal Daniel (2022) Resistance prediction of GRP bedar in calm water using computational fluid dynamic approach / Muhammad Haikal Daniel Jamal. (2022) [Student Project] (Unpublished)

Jamaluddin, Arshad (1996) Efficiencies of finger joint of Light Red Meranti (experimental work) / Arshad Jamaluddin. (1996) [Student Project] (Unpublished)

Jamaludin, Muhammad Farhan Haikal (2022) Hull design and stability analysis of rigid tube rib / Muhammad Farhan Haikal Jamaludin. (2022) [Student Project] (Unpublished)

Johari, Muhammad Harith Iqmal and Zulkarnain, Muhamad Ilman Nafis and Mohd Zamari, Muhammad Alif Syahmi and Husin, Amirul Anwar (2021) Multipurpose table report / Muhammad Harith Iqmal Johari... [et al.]. (2021) [Student Project] (Submitted)

K

Kadir, Mohd Hafiz (2007) Analysis of shear wall structure in Pulau Pinang due to wind load and long distance Sumatran earthquake in terms of stiffness of the building / Mohd Hafiz Kadir. (2007) [Student Project] (Unpublished)

L

Lim, Jit Kheng and Ng, Wen Kuan and Ahmad @ Majid, Mohd Farid (2006) Study of prebored precast pile system - a qualitative approach / Lim Jit Kheng, Ng Wen Kuan and Mohd Farid Ahmad @ Majid. (2006) [Research Reports] (Unpublished)

M

Maspade, Asri (2006) A study on the behaviour of lift core in highrise / Asri Maspade. (2006) [Student Project] (Unpublished)

Mat Nasir, Muhammad Naufal Asyraf (2022) Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir. (2022) [Student Project] (Unpublished)

Mat Ropi, Mohd Safiq Aizat (2014) Method statement of groundbeam (temporary formwork) at Maktab Rendah Sains Mara (MRSM) Besut, Terengganu / Mohd Safiq Aizat Mat Ropi. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Mohamad, Mohd Junaidi (2006) Behaviour of reinfoced concrete beam with silica fume under static loading / Mohd Junaidi Mohamad. (2006) [Student Project] (Unpublished)

Mohamad Suki, Nurdayana and Wan Zaharuddin, Wan Akmal Zahri (2019) Augmented Reality (AR) glasses for inspection of steel formwork system / Nurdayana Mohamad Suki and Wan Akmal Zahri Wan Zaharuddin. (2019) In: 4th Undergraduate Seminar on Built Environment and Technology 2019, 12th June 2019, Universiti Teknologi Mara Perak Branch.

Mohd Abdillah, Muhammad Hanif (2022) A study of surface roughness effect on a mound type breakwater using CWC - an experiment / Muhammad Hanif Mohd Abdillah. (2022) [Student Project] (Submitted)

Mohd Hasseri, Mohd Allias (2002) Effect of geometrical properties of finger joint on the bending strength of timber (profile ii) / Mohd Allias Mohd Hasseri. (2002) [Student Project] (Unpublished)

Mohd Nafi, Muhammad Aniq Hilmie (2018) Method statement for substructure / Muhammad Aniq Hilmie Mohd Nafi. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Mohd Nazrie, Muhammad Nazmi (2022) Propulsion system design of solar boat / Muhammad Nazmi Mohd Nazrie. (2022) [Student Project] (Unpublished)

Mohd Razali, Siti Nur Syafhiqah (2016) UCO solid wall system / Siti Nur Syafhiqah Mohd Razali. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Mohd Shahrul Munir, Mohamad Faiz (2022) Fabrication of miniature foldable storage rack / Mohamad Faiz Mohd Shahrul Munir. (2022) [Student Project] (Unpublished)

Mohd Sok, Mohamad Fakrul (2016) Construction of wall / Mohamad Fakrul Mohd Sok. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Mohd Zakaria, Muhammad Hariz (2025) Production development of traditional Malay boat for tourism / Muhammad Hariz Mohd Zakaria. (2025) [Student Project] (Unpublished)

Mohmmed Haasan, Mohd Khairulnizam (2007) Study on basement and shear wall response by using FEM / Mohd Khairulnizam Mohmmed Haasan. (2007) [Student Project] (Unpublished)

Muhammad Rusli, Mohamad Asroy Nizam (2014) The contsruction of super structure (column and beam) at Clinic Cure and Care, Seri Iskandar, Perak / Mohamad Asroy Nizam Muhammad Rusli. (2014) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Muhd Yusoff, Mohammad Yushaiman Habib and Wan Zakaria, Wan Mohamad Fahmi and Lokman @ Nejib, Muhammad Arash Mifzal and Izaudin, Muhammad Hasif Fitri and Muhammad Hilmi, Ahmad Haiqal Fikri (2021) Payang fiber mould project / Mohammad Yushaiman Habib Muhd Yusoff ... [et al.]. (2021) [Student Project] (Submitted)

Muszaide, Aina Marina (2018) Structure strengthening test / Aina Marina Muszaide. (2018) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

N

Nasir, Amirul Hafiz (2016) Balai Bomba dan Penyelamat Pagoh Muar Johor / Amirul Hafiz Nasir. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak.

Nazri, Muhammad Khairul Nazmi (2022) Structural design and analysis of solar boat / Muhammad Khairul Nazmi Nazri. (2022) [Student Project] (Unpublished)

Noor Heryman, Nur Ain Jannah (2022) Design and fabrication of aluminium can and plastic bottle crusher / Nur Ain Jannah Noor Heryman. (2022) [Student Project] (Submitted)

Nor Hizulmy, Nur Fakhira Batrisya (2022) Feasibility study on installing solar water heater in single cafeteria / Nur Fakhira Batrisya Nor Hizulmy. (2022) [Student Project] (Submitted)

O

Omar, Norizah (1995) Efficiency of glued finger joint / Norizah Omar. (1995) [Student Project] (Unpublished)

Omar, Zamali and Po'a, Ayu Wirdawati and Mohd Rizal Chu, Siti Marlinna Chu (2012) Bending and cutting links hand tools / Zamali Omar, Ayu Wirdawati Po'a and Siti Marlinna Chu Mohd Rizal Chu. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 48.

Openg, Iskanda (1997) Finite element analysis of finger joint / Iskanda Openg. (1997) [Student Project] (Unpublished)

Othman, Akbar and Ismail, Al Emran (2012) Finite element simulation modeling of axial dynamic energy absorption on conical titanium alloy / Akbar Othman and Al Emran Ismail. (2012) In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012), 16-17 April 2012, Universiti Teknologi MARA Cawangan Perak.

P

Petrus, Clotilda and Nyuin, Joe Davylyn (2009) The behaviour of concrete filled thin walled steel column under concentric load / Clotilda Petrus and Joe Davylyn Nyuin. (2009) [Research Reports] (Unpublished)

R

Roslan, Muhammad Azri Faiz (2022) Structure design and analysis of GRP Payang boat / Muhammad Azri Faiz Roslan. (2022) [Student Project] (Unpublished)

S

Sudin, Muhammad Syaifulnizam (2022) Hull design and stability of amphibious boat / Muhammad Syaifulnizam Sudin. (2022) [Student Project] (Unpublished)

Suib, Shamsiah (2002) Effect of geometrical size on the tensile strength of finger joint / Shamsiah Suib. (2002) [Student Project] (Unpublished)

W

Wahijan, Omar (1999) Effect of gap infront the finger tip on tensile strength of finger joint / Omar Wahijan. (1999) Degree thesis, thesis, Universiti Teknologi MARA, Pulau Pinang.

Wan Shamsuddin, Wan Muhammad Azam Idrus (2022) Development of hydroponic farming system / Wan Muhammad Azam Idrus Wan Shamsuddin. (2022) [Student Project] (Submitted)

Wira, Muhammad Irfan Hakimi (2016) Building condition assessment : PWD Quarters Jalan Bruseh / Muhammad Irfan Hakimi Wira. (2016) Industrial Training. Universiti Teknologi Mara, Perak, Seri Iskandar, Perak. (Unpublished)

Y

Ya, Mohammad Syafiruddin (2023) Structure design and strength analysis of GRP swath passenger boat / Mohammad Syafiruddin Ya. (2023) [Student Project] (Unpublished)

Z

Zakaria, Muhammad Amirul (2022) Production design rigid tube rib / Muhammad Amirul Zakaria. (2022) [Student Project] (Unpublished)

Zulkffli, Harith Asyran (2022) Simulation of a flow over a underwater pillar of different surface roughness using computational approach / Harith Asyran Zulkffli. (2022) [Student Project] (Submitted)