Items where Subject is "Polymers. Macromolecules"

A

Characterization and mechanical properties of taro starch / poly (latic acid) Film / Farah Inani Abd Ghani. (2020) [Student Project] (Unpublished)

Structural characterization of silver nanowires (AgNWs) polymeric film for flexible wearable antenna / Nurul Haffiza Abd Halim. (2017) [Student Project]

The effect of different treatment method on mechanical, physical and characterization of sugarcane bagasse / polypropylene composite / Siti Aisyah Syafiqah Abd Halim. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

The effect of treated kenaf fiber on HDPE / glass fiber hybrid composite: characterization and mechanical properties / Nur Nadqirah Abd Jamin. (2020) Degree thesis, thesis, Universiti Teknologi Mara perlis.

MCMB and super P for electrical conductivity improvement in MEH-PPV polymer and SnO₂ nanocomposites / Nor Diyana Abdul Aziz. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Nano-cellulose for active food packaging: characterisation, antimicrobial, antioxidant, and mechanical properties / Nurul Hanisah Abdul Ghani. (2022) [Student Project] (Submitted)

Parameter kehilangan pantulan (RL) komposit ferit (Lio.sFeo.s)o.4Nio.3ZnO.3Fe204 - termoplastik getah asli / Siti Atkah Abdul Hamid dan Abdul Aziz Mansor. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 58-66. ISSN 0128-5599

On a study of polymeric-foam padding as a potential vibration absorbtion for uses in household appliance / Hafizah Abdul Karim. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Recycling of epdm waste : effect of recycled epdm (R-EPDM) loading to mechanical and characterization properties of PP/R-epdm blends / Nur Aziera Abdul Manaf. (2020) [Student Project] (Unpublished)

Synthesis and decarboxylation of 2,3-Dioxophenylpyrrolidine- 3-carboxylic acid etyhl ester / Julieyana Abdul Manap. (2009) [Student Project] (Unpublished)

Synthesis and swelling study on poly (HEMA-co-DMAPMA) based copolymer hydrogels / Anis Izyan Abdul Rahman. (2012) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Influence of 1-butyl-3-methylimidazolium chloride ([BMIM] Cl) reaction temperatures to the toxicity and biodegradation of kapok cellulose film / Wahida Abdul Rahman, Siti Aishatun Abdul Wahab and Salamiah Zakaria. (2015) Jurnal Intelek, 10 (1). pp. 67-73. ISSN 2682-9223

Effect of marble tile waste powder (MTWP) filler on cure and mechanical behaviour of natural rubber (NR) compound / Nor Mazlina Abdul Wahab ... [et al.]. (2019) Jurnal Intelek, 14 (2). pp. 220-229. ISSN 2231-7716

Characterization and properties of durian skin fiber filled polylactic acid/polypropylene compatibilized with glut palmitate salt / Nor Mazlina Abdul Wahab … [et al.]. (2023) Scientific Research Journal, 20 (2): 6. pp. 85-100. ISSN 1675-7009

Optimization tensile properties of sodium bicarbonate natural rubber composite / Nur Fatnin Ayunie Abdull Rahim. (2023) [Student Project] (Submitted)

Synthesis and characterization of plasticized carboxymethyl cellulose based solid biopolymer electrolyte / Fitriyah Munirah Abdullah. (2017) [Student Project] (Unpublished)

Study on the effects of rubber filler in the water uptake mechanism of commercial epoxy and polyurethane coating / Mariatul Nurul Hidayah Abu Bakar. (2009) [Student Project] (Unpublished)

Synthesis of rigid poly urehane foams from soybean oil based polyol / Nor Syazana Abu Hanifah. (2016) [Student Project] (Unpublished)

Wavelength tunable properties of highly oriented colloidal acrylate latex film / Helyati Abu Hassan Shaari, Mohammad Syuhaimi Ab. Rahman and Rahmah Mohemed. (2018) Jurnal Intelek, 13 (1). pp. 18-26. ISSN 2682-9223

Synthesis and characterisation of PANI/CSA in ammonia detection / Zakira Imana Abu Mansor. (2017) [Student Project] (Unpublished)

Physical and electrochemical studies of bio-based chain extended cationic polyurethane with NaTf salt for solid polymer electrolytes / Nurul Ilham Adam. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

The effect of different silane coupling agent concentration towards physical and mechanical properties of polypropylene / banana composite / Shahira Adnan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

The physical and mechanical properties of glutinous rice biodhesive filled hydroxymethyl phenol for wallpaper application / May Syarah Ahmad. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Design and control of new hybrid model reference adaptive fuzzy logic controller for shell-and-tube heat exchanger temperature system / Mohd Aizad Ahmad. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

The effect of particle size of angel-wing clam shell [ACS] powder as a natural reinforcing filler on physical and mechanical properties of EPDM rubber / Hannan Ahmad Mazian. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Kit penyingkir warna lestari alam “bananaSWaT”/ Nor Azliza Akbar ... [et al.]. (2020) In: The 9th International Innovation, Invention and Design Competition 2020, 17 May-10 Oct 2020, Perak, Malaysia.

Kesan komposisi serabut tandan kosong kelapa sawit (stkks) ke atas sifat mekanik komposit busar poliuretana berasaskan minyak isirong kelapa sawit (pko) / Ernie Suzana Ali … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Computational and characterization studies of non- conjugated poly (N-vinylcarbazole) blends as host polymer for phosphorescence emission / Ahmad Nazib Alias. (2015) In: The Doctoral Research Abstracts. IGS Biannual Publication, 8 (8). Institute of Graduate Studies, UiTM, Shah Alam.

Synthesize and characterization of sago starch conductive films modified by ammonium persulfate / Nurfadhilah Amir Hakim. (2022) [Student Project] (Submitted)

Effect of crosslinker composition on strength and thermal properties of polyvinyl alcohol /sago starch film / Norfaizah Amru. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Preparation and characterization of micro bearing from epoxy filled UHMWPE polymer composite / Ahmad Aizuddin Ariffin. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Preparation and characterization of MG30- PEMA blend polymer electrolyte / Siti Fadzilah Ayub. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Ionic conductivity of MG30-PEMA blend solid polymer electrolyte / Siti Fadzilah Ayub … [et al.]. (2015) Scientific Research Journal, 12 (2). pp. 84-93. ISSN 1675-7009

Effect of glut palmitate salt as coupling agent on thermal and mechanical properties of polyvinyl alcohol (PVA) and oil palm empty fruit bunch (OPEFB) / Mohd Zaki Azizan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Thermo osmotic effect of electrospun pvdf membrane / Mohammad Amierza Ikhmar Azmi. (2020) [Student Project] (Unpublished)

C

Epoxidized natural rubber-based nanostructured polymer blends / Chan Chin Han. (2010) [Research Reports] (Unpublished)

The determination of plasticizer in PVC soft toy and Teether / Nur Fadhilah Che Mohamad. (2008) [Student Project] (Unpublished)

Blends of NR with EPDM waste devulcanized by microwave : mechanical properties and self healing ability / Nurain Najwa Che Rahim. (2020) Degree thesis, thesis, Universiti Teknologi MARA Perlis.

E

Dynamic modulus thermal analysis on polymer composite (high density polyethylene with natural rubber) / Sharadina Embong. (2007) [Student Project] (Unpublished)

F

Characterization and properties of water hyacinth fiber reinforced tapioca starch for food packaging applications / Nurul Izzati Fauzi. (2023) [Student Project] (Submitted)

H

Utilization of recycle polyethene (PE) blend with various corn starch loading / Muhammad Izzat Hakimi Azizan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Evaluation of the tensile properties for polypropylene composite – a finite element and mechanic studies / Husnani Hamid. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Electrical conductivity in salt-polymer solutions / Hussein Hanibah. (2011) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

The effect of filler content on properties of clamshell filled polyester composites / Mohd Zul Hanif Zamri. (2020) [Student Project] (Unpublished)

Adhesion promoters – organo - silanes as pre - treatment of substrates surface / Mohamad Kamal Harun. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (4): 2. pp. 9-17. ISSN 0128-5599

Development of microsphere of polymer containing drug by spray drying process / Mohd Amin Hasan. (2006) Degree thesis, thesis, Universiti Teknologi MARA (Kampus Puncak Alam).

Effect of treated eggshells (tES) on cure characteristic, physical and mechanical properties of acrylonitrile butadiene rubber [NBR] composites / Anis Munirah Hilmi. (2020) Degree thesis, thesis, Universiti Teknologi Mara perlis.

Pemilihan bahan kapsul kukuh bagi peranti MEMS di bawah tekanan tinggi / Yusnira Husaini, Ahmad Sabirin Zoolfakar and Mas Izyani Md. Ali. (2009) [Research Reports] (Unpublished)

I

Preparation and caracterization of arcylated expoxidized soybean oil in the making of vegetable oil based – film / Farah Izati Ibrahim. (2020) [Student Project] (Unpublished)

The effect of zinc disorbate as a self-healing agent on the mechanical and physical properties of ionically grafted natural rubber / Faris Haykal Zaky Irfan Zaky. (2022) [Student Project] (Submitted)

The effect of different chemical treatment on the properties of rice husk/polypropylene composite / Najihah Ishak. (2022) [Student Project] (Submitted)

The effect of characterization and mechanical properties of coffee powder filled natural rubber composites / Nur Waiza Shahirah Ishak. (2023) UNSPECIFIED thesis, thesis, Universiti teknologi MARA,Perlis.

J

The production of biodegradable mulch film by using banana peel waste as filler and waste cooking oil as plasticizer / Irsalina Malikah Jabrullah Khan. (2023) [Student Project] (Submitted)

Application of chicken feet gelatin incorporated with green tea extract as food packaging / Nurul Ainizatul Jalani. (2023) [Student Project] (Submitted)

Fabrication and mechanical properties of musa spp. blend with polvpropylene (c3h6)n as polymer composite / Mohd Nazree Jamaldin. (2018) [Student Project] (Unpublished)

Eco-friendly carbonized molasses powder as filler in natural rubber vulcanizate / Siti Jannatul Sakinah Jamaluddin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Effect on biodegradability of LDPE film incorporated with various loading of potato starch / Mohamad Shukri Jasni. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

K

The effect of glycerol and citric acid deep eutectic solvent concentration on the properties of carboxymethyl cellulose (CMC) bioplastic / Kamal Nor Ariff Kamal Nazry. (2023) [Student Project] (Submitted)

Deposition of zinc oxide on N-type silicon wafer / Nur Zalikha Kamarul Zamri. (2010) [Student Project] (Unpublished)

Synthesis of molybdenum disulfide doped polypyrrole hybrid nanocomposite for photocatalytic degradation of 2-chlorophenol from aqueous solution / Muhammad Syazwan Kasim. (2019) [Student Project] (Unpublished)

L

Physical and electrical properties of MG30 based solid polymer electrolytes / Muhammad Asyraf Al-Wafiy Lauthfi. (2022) [Student Project] (Submitted)

M

Effect of different particle sizes of rice husk powder on rice husk powder reinforced high density polyethylene slab on its mechanical properties / Abdul Azim Mahadi. (2022) [Student Project] (Submitted)

A review on the effect of PVA/chitosan blend on the chemical and physical properties of edible film / Imran Hafiz Bin Mahadi Mahadi. (2022) [Student Project] (Submitted)

Characteristic of doped MG49 gel polymer electrolyte / Zaidatul Salwa Mahmud. (2014) Masters thesis, thesis, Universiti Teknologi MARA.

Determination of plastic pollution and its degradation in soil at banana plantation area / Siti Nur Amanina Mat. (2023) [Student Project] (Submitted)

Polymer blends (polypropylene) filled rice husk ash / Mohd Noorwadi Mat Lazim. (2008) [Student Project] (Unpublished)

Effect of palm kernel shell (PKS) powder on cure characteristic, physical and mechanical properties of acrylonitrile rubber (NBR) composites / Nor Adabiah Md Nayan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Biodegradation of low-density polyethylene (LDPE) mixed with corn strach by aspergillus niger, rhizopus. oryzae and their biofilm / Nazatul Nabila Mohamad. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Gelatin (binder) characterization of jackfruit seed starch for biodegradable plastic fabrication / Nur Hanisah Mohamad. (2017) [Student Project] (Unpublished)

Preparation, morphology and structural characterization of sago starch modified with potassium iodide / Ahmad Alif Syamsuddin Mohamad Nasir. (2022) [Student Project] (Submitted)

The effect on mechanical and physical properties of coconut shell bio-fiber as reinforcement in unsaturated polyester resin / Siti Amirah Mohamad Noor. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Expandable polystyrene (EPS) foam filled epoxy composite / Rabiatul Manisah Mohamed. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Sensor piezoelektrik hablur kuartza untuk mengesan sebatian organik meruap / Ruziana Mohamed, Muhamad Mat Salleh and Muhammad Yahaya. (2011) In: Prosiding KONAKA Konferensi Akademik 2011, 6-7 Disember 2011, Universiti Teknologi MARA Pahang.

An electro chemical investigation on salted plasticized ENR 50 based polymer electrolytes / Syafawati Nadiah Mohamed. (2006) [Student Project] (Unpublished)

Tunable highly multimode polymer optical fibre power splitter / Nor Syafiqah Mohamed Kassim. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Theoretical computational study of electronic structure of aromatic and linear tc-conjugate semiconductor / Zubainun Mohamed Zabidi, Ahmad Nazib Alias and Intan Syaffinazzilla Zaine. (2011) [Research Reports] (Unpublished)

The effect of calcined eggshell powder on the properties of egshell / purple potato starch bioplastic / Hafizatul Anis Mohammad. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Synthesis and characterization of new unsaturated polyesters for composite applications / Norshahsillawati Azura Mohammad, Abdul Khalil Shawkataly and Issam Ahmed Mohammed. (2009) In: UNSPECIFIED.

Determination of the effect of force rate in ductile polymer / Ahmad Azizi Mohammed and Henry Petrus. (1997) [Student Project] (Unpublished)

The effect of silane as coupling agent on the polyurethanes filled silica / Noor Khairin Mohd … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Morphological analysis of spirulina algae filled polylactic acid biofilm / Nur Farisha Mohd Adlie. (2023) [Student Project] (Submitted)

FTIR and bulk density study of vulcanized natural rubber/sodium bicarbonate composite / Nursyazana Amira Mohd Azari. (2023) [Student Project] (Submitted)

Synthesis of polyurethane from oil palm frond / Siti Nadia Hani Mohd Daud. (2017) [Student Project] (Unpublished)

The physico-mechanical and thermal properties of coated kenaf fibres in epoxy matrix composite / Muhammad Mustakim Mohd Ghaztar. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Effects of surface modification on the properties of pineapple leaf fiber (PALF) reinforced with poly(lactic acid) (PLA) biocomposite / Shamimi Iwana Mohd Ismail. (2024) [Student Project] (Submitted)

Effects of cymbopogon citratus (lemongrass) essential oil in cornstarch biodegradable film / Fatin Farhanim Mohd Jamil. (2023) UNSPECIFIED thesis, thesis, Universiti Teknologi MARA, Perlis.

Preparation of starch based bioplastics from local tapioca with plasticizer and filler / Fatin Eryna Safiah Mohd Jefri. (2023) [Student Project] (Submitted)

Starch based bioplastic from sweet potato with plasticizer and filler / Muhammad Faren Mohd Kamal. (2023) [Student Project] (Submitted)

The potential use of Tacca leontopetaloides biopolymer flocculant (TBPF) in removal of pollutants leachate and synthetic heavy metal via flocculation process / Nurul Shuhada Mohd Makhtar. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Investigation on the presences of microcrystalline cellulose with different acid treatment on its mechanical and physical properties for sugarcane bagasse bioplastic / Mohamad Amirul Aqwa Mohd Nizam. (2024) [Student Project] (Submitted)

Effect of moisture contamination in engine oil lubricant on mercury outboard engine performance / Ahmad Al Hakim Mohd Razawi. (2022) [Student Project] (Submitted)

Recent advances of different types of biopolymer as coating materials in food packaging : A review / Adilah Mohd Rushdi. (2022) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Environmental friendly collagenase polyurethane adhesive from bovine bone polyol / Marina Mohd Shahabudin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Banana trunk / polyvinyl alcohol composite : the effect of filler loading and gult palmitate salt as coupling agent / Muhammad Syafiq Mohd Shukri. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Nano filtration membrane separation prediction system for analysis of ion transport mechanisms / Norhaslina Mohd Sidek. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, p. 29. ISBN 9789671135440

Characterization, physical and mechanical properties of surface modified rice husk / polypropylene composite / Maisarah Izzati Mohd Zain. (2020) Degree thesis, thesis, Universiti Teknologi MARA Perlis.

Thermal degradation and morphology of Polymer blends comprising Poly(ε-caprolactone) and epoxidized natural rubber with addition of phenol as catalyst / Kamilah Binti Mohd. Alwai. (2009) [Student Project] (Unpublished)

Mechanical properties and morphology of UV-cured glass fiber/epoxy acrylates composite / Mohamad Hafiz Mohd. Wahid. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

The effect of plasticizer concentration on the properties of bioplastic based on cellulose acetate from pineapple leaves / Nurul Shazana Moohamakorreeya Jehyor. (2023) [Student Project] (Submitted)

The effect of ethylene glycol: citric acid concentration as plasticizer in carboxymethyl cellulose (CMC) bioplastic / Nur Athirah Muhamad Razif. (2023) [Student Project] (Submitted)

The production of biodegradable mulch film by using Spent coffee ground as filler and waste cooking oil as bio-resin / Nuraizah Hanum Muhamad Sabuddin. (2023) UNSPECIFIED thesis, thesis, Universiti Teknologi MARA, Perlis.

Characterization and properties of poly lactic acid filled microcrystalline cellulose from rice husk / Muhammad Amirul Hakim Muhammad Mahfuz. (2023) UNSPECIFIED thesis, thesis, Universiti Teknologi MARA, Perlis.

From rice husk to transparent radiation protection material / Iskandar Shahrim Mustafa... [et al.]. (2016) Jurnal Intelek, 9 (2). pp. 1-6. ISSN 2682-9223

N

A review on pomegranate peel extract incorporated chitosan based polymer for biodegradable food packaging / Nur Sabrina Nazeri. (2022) [Research Reports] (Submitted)

Preparation and characterization of bioplastic derived from various banana peel ripening stages / Nur Izzati Nor Muhammed. (2022) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

A review on effect of chemical refinements on natural fiber composite properties / Muhammad Nurhaziq Nordin. (2022) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.

The effect of filler loading and silane coupling agent on properties of rice husk powder filled natural rubber compounds / Razif Nordin, Said C. S. and Ismail H. (2010) Jurnal Intelek, 5 (10). ISSN 2231-7716

The effect of ti02 nanoparticles on properties of carboxymethyl celulose-lithium perchlorate solid biopolymer electrolyte / Nabilah Hani Norihan. (2019) [Student Project] (Unpublished)

O

Ionic conductivity studies on magnesium-based cellulose acetate polymer gel electrolytes / Aniza Omar … [et al.]. (2015) Scientific Research Journal, 12 (2). pp. 26-34. ISSN 1675-7009

Effect of hybrid natural fibre pineapple leaf fiber (PLAF) / carbon black fillers in styrene butadine rubber (SBR) composites on cure, physical and mechanical properties / Nabila Abu Osman. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

R

Cotton biochar polypropylene composite : the study of mechanical properties / Muhammad Faris Ramli. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Low density polyethylene (LDPE) / tapioca starch composites : effect of tapioca starch and ethylene vinyl acetate (EVA) as compatibilizer / Mohamad Hanim Roslan. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Refining of industrial spent-fuel oil by removal of metals impurities using nanoparticle additives / Muhammad Irsyad Roslan. (2022) [Student Project] (Unpublished)

A review on the application of natural based plasticizer for polyvinyl chloride / Nik Adriana Rosli. (2022) Degree thesis, thesis, Universiti Teknologi Mara.

Preparation and characterization of cassava peel starch bioplastic reinforced with bentonite clay layered silicate / Mohammad Syafirul Nazreen Ridzuan. (2023) [Student Project] (Submitted)

S

Effect of moisture contamination in engine oil lubricant on Yamaha outboard engine performance / Saiful Afzainisham Saiful Amran. (2022) [Student Project] (Submitted)

Effect of curing systems on the cure characteristics, physical and mechanical properties of reclaimed rubbers / Nurshamimi Shahirah Saimi. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Rice straw reinforce poly (latic acid) biopolymer. mechanical and thermal properties / Shuhaila Saindin. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Determination of plastic pollution and its degradation in soil at mangoes cultivation area / Nurain Samsudin. (2023) [Student Project] (Submitted)

Synthesis and characterization of modified polymer as polymer electrolyte / Faustina Elfrida Anak Sangok. (2009) [Student Project] (Unpublished)

Stripping performance of Hot Mix Asphalt (HMA) using polymer and hydrated lime as additives / Ekarizan Shaffie. (2008) Masters thesis, thesis, Universiti Teknologi MARA.

Cornstarch-based biopolymer electrolyte doped with Na3PO4 / Syakirah Shahrudin and Azizah Hanom Ahmad. (2016) Science Letters (ScL), 10 (2): 5. pp. 26-30. ISSN (eISSN): 2682-8626

The effect of carbonized sago pith waste [SPW] on the characterization, physical and mechanical properties of vulcanized natural rubber / Nurul Adilah Shahrul Faizal. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Preparation of starch-based bioplastic from local sweet potato with plasticizer and filler / Ainaa’ Nashuha Shahrul Hazaromi. (2023) [Student Project] (Submitted)

Thermal analysis & tensile properties of spirulina algae filled polylactic acid / Nor Amiera Sharweena Shahrulnizam. (2023) [Student Project] (Submitted)

Eco-friendly aloe vera blend chitosan and polyvinyl alcohol film-based for food packaging / Rabi’atul Husniah Farhana Shamsudin. (2024) [Student Project] (Submitted)

Effect of plasticizer on PMMA grafted natural rubber polymer electrolyte / Siti Nakhirah Sharip Huddin. (2013) [Student Project] (Unpublished)

Solution properties of poly (dimethylsiloxanes) in toluene / Maimunah Sokro and Arba'at Hassan. (2004) In: STSS 2004 : Sains Teknologi Jilid1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Substrate binding site of proteases from bacillus lehensis G1 by molecular docking / Noorulaini Sulaiman, Nor Muhammad Mahadi and Nur Zazarina Ramly. (2017) Journal of Academia, 5 (1). pp. 36-43. ISSN 2289-6368

Effect of eggshell calcium carbonate on the properties of cassava starch-based bioplastics / Siti Fatima Az Zahra Sulaiman. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Epoxidation of palm oil using synthesized titanium-silica catalyst and investigation on the properties of acrylated epoxidized palm oil / Sharifah Nafisah Syed Ismail. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Study of effect and character starch with bamboo vinegar in mango using coating / Sharifah Anis Afiqah Syed Mohusin. (2023) [Student Project] (Submitted)

U

Plasticized polymer electrolytes for alkaline batteries / Razi Unuh. (2007) [Student Project] (Unpublished)

W

The investigation of tensile properties of vulcanized natural rubber based on different curing temperature / Wan Nur Ain Syafiqah Wan Azman. (2023) [Student Project] (Submitted)

Preparation of starch-based bioplastics from local sweet potato, tapioca and pumpkin with plasticizer and filler / Wan Humaid Wan Hamid. (2023) [Student Project] (Submitted)

Y

Synthesize and characterization of modified DES as conductive film / Nur A’ina A’isyah. (2022) [Student Project] (Submitted)

Effect of various loading of treated clam shells (tCS-CaCO3) filled acrylonitrile butadiene rubber (NBR) composite on cure characteristics, physical and mechanical properties / Nur Aliyyah Yunus. (2020) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Ionic conductivity and dielectric study of sodium iodide-sodium dicyanamide solid electrolyte / Mohd Khairul Hazwan Yusof and Azizah Hanom Ahmad. (2017) Science Letters (ScL), 11 (1): 4. pp. 18-23. ISSN (eISSN): 2682-8626

Z

Effect of concentration calcium chloride crosslinker to pectin based deep eutectic biofilm / Ismahan Zahudin. (2022) Degree thesis, thesis, Universiti Teknologi Mara.

Fabrication and characterization of jeltrate alginate blend with jackfruit seed starch for biodegradable plastic / Muhammad Nasruddin Nasri Zainal. (2017) [Student Project] (Unpublished)

Ionic conductivity studies of PEO based polymer electrolyte : PEO + LiBF4 + Si02 / Lili Widarti Zainuddin. (2008) [Student Project] (Unpublished)

Biodegradation of low-density polyethylene (LDPE) mixed with potato starch by Aspergillus niger rhizopus oryzae and their biofilms / Nurhidayah Zakaria. (2020) Degree thesis, thesis, Universiti Teknologi MARA, Perlis.