Items where Subject is "Furniture industry and trade"

A

Ab Manah, Norsyamimi (2020) Case Study : Hasim Enterprise / Norsyamimi Ab Manah. [Entrepreneurship Project] (Submitted)

Abdillah Su'ut, Mohammad Mubarak (2008) Pricing strategy : a study on STIDC Furniture Vendor under the STIDC Furniture Vendorship Development Programme (PPVP) in Sarawak / Mohammad Mubarak Abdillah Su'ut. [Student Project] (Unpublished)

Abdul Fatta, 'Ainul Farhani (2017) Tradern console table from neolamarckia cadamba / 'Ainul Farhani Abdul Fatta. [Student Project] Faculty of Applied Sciences. (Unpublished)

Abdul Halim, Noor Ha-Mah and Mohd Satree, Nurulain and Norsalleh, Nur Saleha and Hafizahni, Abd Azis (2014) Fix & Re Kusyen / Noor Ha-Mah Abdul Halim ... [et al.]. [Entrepreneurship Project] (Unpublished)

Abdullah, Noor Syameera ‘Aina (2020) Case Study : MYR Construction Sdn. Bhd / Noor Syameera ‘Aina Abdullah. [Entrepreneurship Project] (Unpublished)

Abdullah, Nur Baizura (2020) Case Study : Myr Construction Sdn.Bhd. / Nur Baizura Abdullah. [Entrepreneurship Project] (Unpublished)

Abu Hassan, Mohd Fazli (2015) Strength properties of single dowel joint using kelempayan wood and opt / Mohd Fazli Abu Hassan. [Student Project] (Unpublished)

Abu Zahir, Ahmad Shahmi and Johari, Julia and Azrul, Nur Ainaa and Mohd Shukry, Nur Hawa Hana Humaira and Mohd Zamzuri, Nursyuhada and Mohd Isnani, Zaidatulhusna (2025) Portable Smart Sink. In: Negeri Sembilan International Exposition (NSIEx) & Research Symposium 2025: e-Book of Extended Abstract.. Universiti Teknologi MARA, Negeri Sembilan , pp. 26-28 . ISBN 9786299595373.

Ahmad, Norliana (2002) Building up of FMS simulation model for furniture industry / Norliana Ahmad. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Alias, Mohamad Yazid and Che Malek, Muhamad Amar Fariz (2015) Transkrip wawancara bersama Tuan Haji Ghazali Mamat the owner of Perabot Ghazali Sdn. Bhd. / Mohamad Yazid Alias and Muhamad Amar Fariz Che Malek. Perpustakaan Tengku Anis . (Unpublished)

B

Badrishah, Nur Fadzillah (2018) The relationship between physical office environments on employees’ productivity in furniture industry at Melaka Tengah District / Nur Fadzillah Badrishah. [Student Project] Faculty of Business and Management. (Unpublished)

Bakar, Mohd. Nazri Salim and Zainol, Aswady and Ramli, Megat Nor Rashid Megat and Mohd Ghazali, Mohd Fadil and Hasnan, Noohamizee (1998) ETR 300 : Mega Star Furnishing Centre / Mohd. Nazri Salim ... [et al.]. [Entrepreneurship Project] (Unpublished)

Bojei, Jamil and Othman, Mohd. Shahwahid and Yeap, Teik Bu (2002) Global marketing strategies : an examination of the Malaysian wooden furniture industry / Jamil Bojei, Mohd. Shahwahid Haji Othman and Yeap Teik Bu. Journal of International Business, Economics and Entrepreneurship (JIBE) , 9 (1) . pp. 57-84. ISSN 0128-7494.

D

Daud, Ibrahim and Mahmud, Mohd. Nasir and Ahmad Zawawi, Fairul Rafiq and Zainal, Masni and Alwi, Johari (1999) ETR 300 Creative Furniture Sdn. Bhd. / Ibrahim Daud... [et al.]. [Entrepreneurship Project] (Unpublished)

F

Fadzil Kadir, Lydiawati (2007) Essential attributes for wooden furniture products: A case study on Sarawak State Government Departments and Agencies employees in Petra Jaya / Lydiawati Fadzil Kadir. [Student Project] (Unpublished)

G

Gunawi, Alfian (1992) Traditional furniture. The effects from the introduction of new methods of materials / Alfian Gunawi. [Student Project] Faculty of Architechture , Planning & Surveying. (Unpublished)

H

Halim, A’isyatul Humaira’ (2020) Case Study : MYR Construction Sdn Bhd / A’isyatul Humaira’ Halim. [Entrepreneurship Project] (Submitted)

Harun, Nurul Aida and Bogal, Norazamimah and Raja Zainuddin, Raja Nur Ain and Abd Rahim, Muhamad Riduan and Ab Rahman, Mohamad Izwan (2012) 1Meja / Nurul Aida Harun … [et al.]. In: RIID 2012: Innovation For Sustainable Growth.. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka , Alor Gajah , p. 38 .

Hasan, Zuhairah and Shamsir, Nur Syafiqah and Mohamad Fauzi, Nur Farahin and Wan Ahmad Hidhir, Wan Nur Hidayah and Mohd Dzahaimi, Norazmira and Jafar, Nur Aishah (2017) Lil-A-Lib (multipurpose chair) / Zuhairah Hasan … [et al.]. In: Melaka International Intellectual Exposition (MIIEX 2007).. Division of Research and Industry Linkages , Alor Gajah, Melaka .

Hasbolah, Nurul Atiqah (2017) Potential use of melastoma malabathricum as raw material for particleboard / Nurul Atiqah Hasbolah. [Student Project] Faculty of Applied Sciences. (Unpublished)

Hassan, Zulkarnian and Ali Yasin, Siti Maryam (2012) Inovasi bangku gypsum / Zulkarnian Hassan and Siti Maryam Ali Yasin. In: 1st International Conference on Innovation and Technology for Sustainable Built Environment 2012 (ICITSBE 2012) , 16-17 April 2012 , Universiti Teknologi MARA Cawangan Perak .

I

Ibrahim, Mohd. Ashrie and Zailany Zainuddin, Abd. Kadir (1992) Kajian mengenai kerosakan perabot-perabot (kerusi dan meja pelajar) di kajian kejuruteraan ITM, sebab-sebab kerosakan dan cadangan-cadangan mengelakkan kerosakan / Mohd. Ashrie Ibrahim and Abd. Kadir Zailany Zainuddin. [Student Project] (Unpublished)

Izwani Masri, Harris Daniel and Ahmad Fauzi, Ahmad Zikri and Asmul Affendy, Aina Amiera (2023) Amber Resins Enterprise / Harris Daniel Izwani Masri, Ahmad Zikri Hanif Ahmad Fauzi & Aina Amiera Asmul Affendy. [Entrepreneurship Project] (Unpublished)

J

Jaafar, Addina Adwa and Ariffin, Muhammad Aiman and Abdullah, Muhammad Aidil Kiefli and Muzakir, Muahmmad Arham and Yahaya, Fatin Fasihah (2021) LeFactoria manufacturing Sdn. Bhd foldable table. [Entrepreneurship Project] (Unpublished)

Jaafar, Addina Adwa and Ariffin, Muhammad Aiman and Abdullah, Muhammad Aidil Kiefli and Muzakir, Muahmmad Arham and Yahaya, Fatin Fasihah (2021) LeFactoria manufacturing sdn. bhd foldable table. [Entrepreneurship Project] (Unpublished)

Jaibi, Jonethon and Mohd Azmi, Nur Syazana and Abdul, Nurul Amalina and Baharuddin, Rapidah and Sarus, Shermaine Kristy (2013) Revolution of Furniture / Jonethon Jaibi ... [et al.]. [Entrepreneurship Project] (Unpublished)

Jasni, Norsyazana (2017) Properties of particle board from Bagasse (saccharum offlclnarum l) mix with unknown species of wood waste in relation to wood ratio and resin / Norsyazana Jasni. [Student Project] Faculty of Applied Sciences. (Unpublished)

Juha Seman, Muhammad Hafizzullah (2020) Case Study : MYR Construction Sdn. Bhd / Muhammad Hafizzullah Juha Seman. [Entrepreneurship Project] (Submitted)

K

Kamal Farid, Faizal Shahrin and Mustafa, Azrina and Nasarudin, Muzaffar Ariff and Hasan, Hazimah and Ishak, Emilia (2000) ETR 300 : Idaman Exclusive Furniture / Faizal Shahrin Kamal Farid ...[et al.]. [Entrepreneurship Project] (Unpublished)

Kiprawie, Adli (2002) Wood-base industry in Sarawak -furniture making; the level of readiness of the bumiputera furniture makers of the Kuching Division, Sarawak in facing AFTA / Adli Kiprawie. [Student Project] (Unpublished)

M

Mahmood,, Mat Fauzi and Hussin,, Muhd. Yusof and Yahya,, Mohd. Salmi and Abd. Kadir,, Ahmad Iskandar and Md. Nor,, Mohd. Shahrim (1999) Asas Keusahawanan (ETR 300) : Unique Pillar Enterprise / Mat Fauzi Mahmood... [et al.]. [Entrepreneurship Project] (Unpublished)

Manaf, Abdul Halim (2009) School furniture ergonomics : optimal design criteria for standard requirements in Malaysian education system / Abdul Halim Manaf. PhD Thesis , Universiti Teknologi MARA .

Mansor, Nor Hayati and Ibrahim, Rahinah (2022) Personal competency and behaviour effect on design judgement among designers in furniture manufacturing / Nor Hayati Mansor and Rahinah Ibrahim. International Journal of Art and Design (IJAD) , 6 (1) : 7 . pp. 67-79. ISSN 2710-5776.

Mazlan, Muhammad Hanif (2017) Manufacture of laminated strips board from ivory Bamboo (bambusa vulgaris var. striata) / Muhammad Hanif Mazlan. [Student Project] Faculty of Applied Sciences. (Unpublished)

Mazlan, Nurul Nadhirah (2017) Performance of chairs from eucalyptus pellita and public acceptation / Nurul Nadhirah Mazlan. [Student Project] Faculty of Applied Sciences. (Unpublished)

Md Yunos, Aishah (2012) Noise pollution in wooden furniture industry / Aishah Md Yunos. [Student Project] (Unpublished)

Medan, Iliadne Francis (2002) An analysis of problems on physical evidence of Lot 80 Sdn. Bhd. / Iliadne Francis Medan. [Student Project] (Unpublished)

Misuari, Kamil (2002) Formulating a marketing strategy for Metro Mercu Sdn Bhd a furniture manufacturing company in Sarawak / Kamil Misuari. [Student Project] (Unpublished)

Mohamad Shafiee, Nor Shazana and Che Saad, Ummi Nadzirah and Ahmad Shukri, Najaa Athirah and Soffian, Sofia Alia Natasya (2020) ENT 300 : Elite Ort Enterprise / Nor Shazana Mohamad Shafiee ... [et al.]. [Entrepreneurship Project] (Unpublished)

Mohd Asri, Nur Amira Farhana (2021) Industrial Training Report: Chuan Lip Furniture Sdn Bhd. Special project: The impact of raw material cost on companies’ earnings in furniture industry / Nur Amira Farhana Mohd Asri. Industrial Training. Universiti Teknologi MARA, Perlis . (Submitted)

Mohd Hanif, Asyila Sasha and Mat Nor, Muhammad Nazmi (2014) The factors that affect the purchase decision of furniture in Islamic concept / Asyila Sasha Mohd Hanif and Muhammad Nazmi Mat Nor. [Student Project] Faculty of Business and Management. (Unpublished)

Mohd Hidli, Suci Salsabilla and Abdillah, Nuryasyqin and Rosli, Ainnin Sofiya and Hayazi, Muhammad Afiq and Razali, Elmi Nasrun (2022) Futuric Sdn. Bhd. / Suci Salsabilla Mohd Hidli … [et al.]. [Entrepreneurship Project] (Unpublished)

Mohd Mokhtar, Izyan Lyana (2012) Air pollution in Malaysian furniture industry / Izyan Lyana Mohd Mokhtar. [Student Project] (Unpublished)

Mohd Noor, Nurul Fahana (2014) Potential bamboo side table with 60 degrees of curvature leg in furniture industries / Nurul Fahana Mohd Noor. [Student Project] (Unpublished)

Mohd Razalli, Muhammad Hanif (2021) Business Opportunity : NDZ Teluk Enterprise / Muhammad Hanif Mohd Razalli. [Entrepreneurship Project] (Unpublished)

Mohd Sah, Najwaa (2014) Finishing properties of acid catalyst lacquer on Kelempayan (Neomalarckia cadamba) and Sesenduk (Endospermum sp) / Najwaa Mohd Sah. [Student Project] (Unpublished)

Mohd Terki, Nur Medinah (2003) A study on human resource factors that affect the Bumiputera wooden furniture vendors in Kuching region / Nur Medinah Mohd Terki. [Student Project] (Unpublished)

Mohd Zamri, Muhammad Arash Muttaqin (2019) Influence of different types of house design towards preferences for space saving furniture in Bandar Tun Abdul Razak / Muhammad Arash Muttaqin Mohd Zamri. [Student Project] (Unpublished)

N

Nazri, Muhamad Zahir (2017) Improvement of flexural properties and dimensional stability of rice husk particleboard using wood strand from (azadirachta excelsa) in face layer / Muhamad Zahir Nazri. [Student Project] Faculty of Applied Sciences. (Unpublished)

Nazri, Nur Laila Maisarah and Nazli, Nur Aqilah Syuhada and Mohd Salim, Lailatul Huda (2025) Woodpillar Enterprise. [Entrepreneurship Project] (Unpublished)

R

Ramli, Nurul Athirah (2020) Technology Blueprint Urban Art Enterprise / Nurul Athirah Ramli. [Entrepreneurship Project] (Submitted)

S

Salim, Abdul Rasyid (2012) Machining properties of oil palm lumber / Abdul Rasyid Salim. [Student Project] (Unpublished)

Samsuddin, Muhammad Fitri and Mohd Anwar, Mohd Firuz and Mohd Yusof, Nurhikma and Samsudin, Nazashah (2012) Collapsible kitchen cabinet for small house usage / Muhammad Fitri Samsuddin … [et al.]. In: RIID 2012: Innovation For Sustainable Growth.. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka , Alor Gajah , p. 23 . ISBN 9789671135440.

Sinong, Bendley Rondheartons and Asan Gabra, Jemaline and Francis, Didacus and Nawi, Amir and Edwin, Nelly (2009) Borneo Bamboo Enterprise / Bendley Rondheartons Sinong ... [et al.]. [Entrepreneurship Project] (Unpublished)

Sugai, Dunstan and Zakariah, Nurzafilah and Jasni, Mohd Dzuliqyan and Wahid, Nur Farhana and Mat Jaini, Faezah (2007) Fundamental of Entrepreneurship ENT300 Apex Door Sdn Bhd / Dunstan Sugai... [et al.]. [Entrepreneurship Project] (Unpublished)

Suhaimei, Nur Hamizan (2017) Geometry coffee table / Nur Hamizan Suhaimei. [Student Project] Faculty of Applied Sciences. (Unpublished)

Suja, Mohd Zainal and Buyong, Suhaimi (1984) The design and fabrication op compact metal furniture for garden / Mohd Zainal Suja and Suhaimi Buyong. [Student Project] (Unpublished)

T

Tahir, Norazila (2002) Building up of FMS simulation model for furniture industry / Norazila Tahir. Degree Thesis , Universiti Teknologi MARA (UiTM) .

Z

Zakaria, Muhammad Azharuddin (2017) Azble (coffee table) / Muhammad Azharuddin Zakaria. [Student Project] Faculty of Applied Sciences. (Unpublished)