Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]

Noh, Izzah Azimah and Ahmad, Said and Awang, Khairul and Moh Yusoff, Muhammad Najib (2014) Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]. In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Abstract

This paper focuses on the standard blank for wood lamination on Khaya ivorensis. Standard blank is a cutting standard for a blank which are provides improving and increasing the value of sawn timber. Parameters for standard blank were machining practices and lamination process. Adhesives used for the study is Polyvinyl Acetate (PVAc). The purpose of standard blank based on machining practices (system) and lamination process (process). Explain that, the different machine used in producing sawn timber provides different result for surface roughness that affects the gluing properties during lamination process. The physical and mechanical properties were tested as Modulus of Rupture (MOR), Modulus 0f Elasticity (MOE), Compression shear and Delamination test were evaluated based on reference standard of in house method testing; BS 373:2008 (MOR and MOE), BS 373:1957- reconfirm 2008 (Compression shear) and JAS 1751 2008 (Delamination test). For the system, there are two type of system; sanding system (S1) and without sanding system (S2). Overall results show that the without sanding system is recommend in the production. Other than that, there are three type of lamination process that need to be compare for this study which are plane and plane (P1), rip and rip (P2) and plane and rip (P3). From the three type of lamination process, the most suitable surface used for lamination process by using different machining practices is plane and plane.

Metadata

Item Type: Conference or Workshop Item (Paper)
Creators:
Creators
Email / ID Num.
Noh, Izzah Azimah
izzahnoah@yahoo.com
Ahmad, Said
UNSPECIFIED
Awang, Khairul
UNSPECIFIED
Moh Yusoff, Muhammad Najib
UNSPECIFIED
Subjects: S Agriculture > SD Forestry > Timber
T Technology > TS Manufactures > Production management. Operations management > Manufacturing processes. Lean manufacturing
T Technology > TS Manufactures > Engineered wood. Fiberboard, particle board, etc.
T Technology > TS Manufactures > Furniture
Divisions: Universiti Teknologi MARA, Pahang > Jengka Campus
Event Title: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014)
Event Dates: 23 December 2014
Page Range: pp. 73-80
Keywords: Standard blank, Wood lamination, Khaya wood
Date: 2014
URI: https://ir.uitm.edu.my/id/eprint/57678
Edit Item
Edit Item

Download

[thumbnail of 57678.PDF] Text
57678.PDF

Download (3MB)

ID Number

57678

Indexing

Statistic

Statistic details