Items where Subject is "Timber"

Group by: Creators | Item Type
Jump to: A | C | H | I | J | K | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 92.

A

Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. (2015) [Student Project] (Unpublished)

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Resveratrols from the stembark of shorea ovalis (meranti kepong) (dipterocarpaceae) and antioxidant activity / Rosmawati Abdul Aziz and Norizan Ahmat. (2018) Gading Journal for Science and Technology, 1 (1). pp. 87-94. ISSN 2637-0018

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from kenaf (hibiscus cannabinus l.) core and acacia (acacia mangium) wood / Azizul Arifin Abdullah Khir, Jamaludin Kasim and Wan Mohd Nazri Wan Abd Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Strength properties of single dowel joint using kelempayan wood and oil palm trunk / Mohd Fazli Abu Hassan, Ahmad Fauzi Awang @ Othman and Asnawi Serailla. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Variations in mechanical properties for different clones of acacia hybrid pulps after beating / Sharmiza Adnan … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Histana, Kuantan Pahang.

Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Properties of wood plastic composite from azadirachta excelsa using different percentage of sawdust / Nur Balqis Ashraf Ramly and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

C

Mechanical and physical properties of oriented strand board from kelempayan wood / Mohd Aizuddin Che Rosli and Wan Mohd Nazri Wan Abd Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

H

The roles of timber and non timber resources in the sustainable development of forest-based industries in peninsular Malaysia / H. Norini. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

The effect of different filler loading and types of filler on the mechanical and physical properties of wood plastic composite from sapium baccatum (Ludai sp.) / Nurul Najwa Hamis. (2019) [Student Project] (Unpublished)

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Labelling phobias - new form of non-tariff barriers in international trade for tropical timber and wood / Arshad Hashim. (1996) Jurnal Akademik. pp. 1-12. ISSN 0128-2635

Unmanned Aerial Vehicle (UAV) for heritage tree detection / Khalilah Hassan, Siti Norlizaiha Harun and Siti Rasidah Md Sakip. (2018) In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.

I

'Tricle' epoxy coffee table from light hardwood / Nor Iryani Ibrahim. (2020) [Student Project] (Unpublished)

Finishing properties of coffee table by using kelempayan (Neolamarckia cadamba) / Hanis Afiqah Idrus and Junaiza Ahmad Zaki. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Hidden storage side table / Muhd Faiz Ismail. (2020) [Student Project] (Unpublished)

Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

J

Integrating rubber with sentang - current agroforestry practice / Ahmed Azhar Jaafar … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Histana, Kuantan Pahang.

Using computer simulation to study the dynamics of moisture distribution in wood / Mohd Ariff Jamaludin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard from admixture of petai belalang (leucaena leucocephala) and kenaf core (hibiscus cannabinus l.) particles / Khairul Azhar Johari, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

K

Compact book rack made from kelempayan (neolamarkia cadamba) and blockboard / Sadam Kahar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (endospermum diadenum) wood / Zilawati Kamal and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard produce from hybrid of Ludai and Kelempayan / Nur Mardiatul Fitriah Kamaruddin. (2019) [Student Project] (Unpublished)

Properties of wood plastic composites (Wpc) from Batai Spp. (Paraserianthes Falcataria) / Jamaludin Kasim … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Effects of particle sizes, resin content and board density on properties of Sesendok particleboard / Jamaludin Kasim … [et al.]. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 1-9. ISSN 0128-5599

Can forest conservation and logging activities be reconciled for sustainable future? A case of Deramakot Forest Reserve in Borneo / Silverina Anabelle Kibat, Anderson Ngelambong and Vickson E Tabak. (2019) ESTEEM Journal of Social Sciences and Humanities, 3. pp. 80-87. ISSN 2600-7274

M

Oriented strand board from rubberwood and juvenile sentang / Suffian, M … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of bio-composite product from acacia strand and coconut veneer / Siti Nadrah M. Omar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Screw-withdrawal properties of batai (Parensenthes falcataria) particleboard / Safura Mamat, Nurrohana Ahmad and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Effect of alkaline percentages on wood plastic composites properties / Muhammad Nabil Irsyad Masir. (2015) [Student Project] (Unpublished)

Finishing performance of acid catalyst lacquer on (Neobalanocarpus hemii) using different systems and different viscosity / Marini Mazlan. (2019) [Student Project] (Unpublished)

Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multifunction rack made from kelempayan (neolamarkia cadamda) / Mohammad Faize Moftar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Side table with reflected lamp / Muhammad Bukhari Mohamad Nadzrin. (2020) [Student Project] (Unpublished)

Influence of the oil palm trunk and acacia mangium on the particleboard Properties / Abdul Hakim Baihaqi Mohamad Noor, Zaimatul Aqmar Abdullah and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Physical properties of Kelempayan (Neomalarckia cadamba sp.) wood / Nur Sakinah Mohamed Tamat …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of thermoplastic composite using sesendok and kelempayan sawdust at different filler loading of polypropylene / Noorshashilawati Azura Mohammad … [et al.]. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Some factors influencing the amount of fines for forest offenses / Rusli Mohd and Nik Suryana Nik Mat. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of acacia mangium wcb in relation to particle size and additives (Na2Si03) / Mohamad Alif Aizat Mohd Azhar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. (2015) [Student Project] (Unpublished)

Effect of resin content and density on the properties three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta and Jamaludin Kasim. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. (2015) [Student Project] (Unpublished)

Performances of nitrocellulose lacquer and acid catalyst lacquer on giam (Hopea spp.) / Izzattie Mohd Saluji. (2019) [Student Project] (Unpublished)

Adhesion of finishing material: Influence of timber species and coating layers / Mohamad Alif Mohd Yazied and Amran Shafie. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Effect of resin content and species on the properties of particleboard from leuceana spp and rubberwood / Mohd Aizuddin Mohd Yusoff and Wan Mohd Nazri Wan Abd. Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Modelling of above ground biomass (AGB), stand volume and carbon stocks of eucalyptus plantations using worldview-2 imagery in Sabah, Malaysia / Ahmad Farid Mohsin. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Smart coffee table from wooden pallet / Muhamad Aminuddin Mokhtar. (2020) [Student Project] (Unpublished)

Bending strength of finger joint from kelempayan (neomalarkia cadamba) and ludai (sapium baccatum) / Nik Amirul Fadzil Mokhtar and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Butterfly inspired foldable table / Nurul Manisa Muhamad Saupi. (2019) [Student Project] (Unpublished)

Sifat fizikal dan struktur kayu: keunikan kayu dan keagungan tuhan / Suhaimi Muhammed and Rudaini Mohd Nawawi. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

The performance of Kempas and Keruing in structural finger jointing / Suhaimi Muhammed and Wan Mahmood Wan Abdul Majid. (1999) GADING Jurnal UiTM Cawangan Pahang, 5 (2): 3. pp. 26-38. ISSN 0128-5599

Kajian perbandingan anatomi daun bagi beberapa spesies shorea roxb., hopea roxb., dan vatica linn. (dipterocarpaceae) / Nor Lailatul Wahidah Musa and Liliwirianis Nawi. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

N

Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Developing environmentally friendly furniture through life cycle analysis / Kamarulzaman Nordin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

O

Anatomical, physical and mechanical properties of leucaena leucocephala wood / Mohd Hanif Othman. (2011) [Student Project] (Unpublished)

P

The trade direction of Malaysian wood and wood-based products in 2000 / Ahmad Fauzi Puasa and Ab. Rasip Ab. Ghani. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 41-49. ISSN 0128-5599

R

Marble inspired coffee table / Athirah Izzati Razak. (2020) [Student Project] (Unpublished)

S

Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of nine years old kelempayan / Hazman Raziq Salikin. (2019) [Student Project] (Unpublished)

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core. / Syed Muhammad Azlan Sayed Idrus, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Strength properties of t-shaped joint members from kelempayan wood / Asnawi Seraila and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Influence of particle sizes on homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila and Shaikh Abdul Karim Yamani Zakaria. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. (2015) [Student Project] (Unpublished)

Decay resistance between sapwood and heartwood of parashorea malaanonan / Mahmud Sudin and Razak Wahab. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

T

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan / Tuan Mohd Fakrul Razie Tuan Ismail and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

U

Properties of particleboard from Petai Belalang and Kelempayan / Nur Nadira Usop. (2019) [Student Project] (Unpublished)

W

A study on the veneer recovery rate in a plywood plant / W. Mohd Nazri W. Abdul Rahman and Mohd Ariff Jamaludin. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 152-160. ISSN 0128-5599

Finishing properties of pine species from wood pallet by using nitrocellulose lacquer with different finishing systems and grits of abrasive paper / Nur Asyikin Wahab. (2019) [Student Project] (Unpublished)

Strength properties of engineered wood i-joist with finger jointed oriented strand board (osb) web and laminated veneer lumber flanges (lvl) / Wan Mohd Nazri Wan Abd Rahman and Mohd Ariff Jamaludin. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 3. pp. 14-23. ISSN 0128-5599

Potential forest plantation species: Leucaena leucocephala / Wan Mohd Nazri Wan Abd Rahman …[et al.]. (2009) In: UNSPECIFIED.

Effect of diameter and log shape on the veneer recovery rate in a plywood plant / Wan Mohd Nazri Wan Abdul Rahman and Mohd Ariff Jamaludin. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Early assessment: Trial plot study of leucaena lueucocephala / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Mechanical properties of oriented strand board from kelempayan wood at different resin content / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Properties of oriented strand board (OSB) from mixed species of Mahang and Lundai / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 55-68. ISSN 0128-5599

Spectroscopic studies of oligostilbenes from Malaysian dipterocarpaceae / Wan Zuraida Wan Mohd Zain … [et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 69-75. ISSN 0128-5599

Y

Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599

Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of laminated veneer lumber from oil palm trunk veneer using different adhesives / Muhammad Najib Yusoff, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Z

Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. (2015) [Student Project] (Unpublished)

Properties of hybrid particleboard produce from acacia and ludai / Nurul Nadjwa Zainuddin. (2019) [Student Project] (Unpublished)

Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. (2015) [Student Project] (Unpublished)

This list was generated on Fri Dec 2 20:10:03 2022 UTC.