Items where Subject is "Timber"

Article

Resveratrols from the stembark of shorea ovalis (meranti kepong) (dipterocarpaceae) and antioxidant activity / Rosmawati Abdul Aziz and Norizan Ahmat. (2018) Gading Journal for Science and Technology, 1 (1). pp. 87-94. ISSN 2637-0018

Variation of moisture content and density in bamboo (gigantochloa scortechinii) : Effects of age and culm height / Abd. Jalil Ahmad, Jamaludin Kasim and Abd. Latif Mohmod. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 1. pp. 1-5. ISSN 0128-5599

Labelling phobias - new form of non-tariff barriers in international trade for tropical timber and wood / Arshad Hashim. (1996) Jurnal Akademik. pp. 1-12. ISSN 0128-2635

Effects of particle sizes, resin content and board density on properties of Sesendok particleboard / Jamaludin Kasim … [et al.]. (2008) Jurnal Gading UiTM Pahang, 12 (1). pp. 1-9. ISSN 0128-5599

Can forest conservation and logging activities be reconciled for sustainable future? A case of Deramakot Forest Reserve in Borneo / Silverina Anabelle Kibat, Anderson Ngelambong and Vickson E Tabak. (2019) ESTEEM Journal of Social Sciences and Humanities, 3. pp. 80-87. ISSN 2600-7274

Wood quality assessment of rubberwood : The effect of clone and age on specific gravity and strength properties / Suhaimi Muhammed, Mansur Ahmad and Mohd Hamami Sahri. (2001) GADING Jurnal UiTM Cawangan Pahang, 6 (1 & 2): 6. pp. 67-73. ISSN 0128-5599

Variation in fibre morphology and porosity of rubberwood (hevea brasiliensis) / Suhaimi Muhammed and Mohd. Hamami Sahri. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 6. pp. 40-45. ISSN 0128-5599

The performance of Kempas and Keruing in structural finger jointing / Suhaimi Muhammed and Wan Mahmood Wan Abdul Majid. (1999) GADING Jurnal UiTM Cawangan Pahang, 5 (2): 3. pp. 26-38. ISSN 0128-5599

The trade direction of Malaysian wood and wood-based products in 2000 / Ahmad Fauzi Puasa and Ab. Rasip Ab. Ghani. (2003) Gading Jurnal Akademik, 1,2 (8). pp. 41-49. ISSN 0128-5599

A study on the veneer recovery rate in a plywood plant / W. Mohd Nazri W. Abdul Rahman and Mohd Ariff Jamaludin. (2002) Gading Jurnal Akademik, 1,2 (7). pp. 152-160. ISSN 0128-5599

Strength properties of engineered wood i-joist with finger jointed oriented strand board (osb) web and laminated veneer lumber flanges (lvl) / Wan Mohd Nazri Wan Abd Rahman and Mohd Ariff Jamaludin. (2000) GADING Jurnal UiTM Cawangan Pahang, 5 (3): 3. pp. 14-23. ISSN 0128-5599

Properties of oriented strand board (OSB) from mixed species of Mahang and Lundai / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 55-68. ISSN 0128-5599

Spectroscopic studies of oligostilbenes from Malaysian dipterocarpaceae / Wan Zuraida Wan Mohd Zain … [et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 69-75. ISSN 0128-5599

Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599

Book Section

A conservation of heritage timber building in Malaysia “Masjid Lama Kampung Kuala Dal”, Kuala Kangsar, Perak / Robiah Abdul Rashid … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 40. (Submitted)

Multi-purpose (MPs) chair / Nur Huda Husna Mohd Hasmy … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Conference or Workshop Item

Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Chess square table from machining wood waste / Nur Hannani Abdul Latif …[et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from kenaf (hibiscus cannabinus l.) core and acacia (acacia mangium) wood / Azizul Arifin Abdullah Khir, Jamaludin Kasim and Wan Mohd Nazri Wan Abd Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Strength properties of single dowel joint using kelempayan wood and oil palm trunk / Mohd Fazli Abu Hassan, Ahmad Fauzi Awang @ Othman and Asnawi Serailla. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Variations in mechanical properties for different clones of acacia hybrid pulps after beating / Sharmiza Adnan … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Histana, Kuantan Pahang.

Effects of screened particle sizes and wood: Polypropylene mixing ratio on the physical and mechanical properties of rubberwood plastic composites / Nurrohana Ahmad …[et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Tensile strength behavior of laminated veneer lumber / Zakiah Ahmad … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of wood plastic composite from azadirachta excelsa using different percentage of sawdust / Nur Balqis Ashraf Ramly and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of oriented strand board from kelempayan wood / Mohd Aizuddin Che Rosli and Wan Mohd Nazri Wan Abd Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Malaysian forest-based industries in the global economy / H. Norini. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

The roles of timber and non timber resources in the sustainable development of forest-based industries in peninsular Malaysia / H. Norini. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Unmanned Aerial Vehicle (UAV) for heritage tree detection / Khalilah Hassan, Siti Norlizaiha Harun and Siti Rasidah Md Sakip. (2018) In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.

Finishing properties of coffee table by using kelempayan (Neolamarckia cadamba) / Hanis Afiqah Idrus and Junaiza Ahmad Zaki. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Integrating rubber with sentang - current agroforestry practice / Ahmed Azhar Jaafar … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Histana, Kuantan Pahang.

Using computer simulation to study the dynamics of moisture distribution in wood / Mohd Ariff Jamaludin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard from admixture of petai belalang (leucaena leucocephala) and kenaf core (hibiscus cannabinus l.) particles / Khairul Azhar Johari, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Compact book rack made from kelempayan (neolamarkia cadamba) and blockboard / Sadam Kahar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (endospermum diadenum) wood / Zilawati Kamal and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of wood plastic composites (Wpc) from Batai Spp. (Paraserianthes Falcataria) / Jamaludin Kasim … [et al.]. (2013) In: Prosiding KONAKA Konferensi Akademik 2013, 28-29 Oktober 2013, Bukit Gambang Resort City, Gambang, Pahang, Malaysia.

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Finishing properties of acid catalyst lacquer on Oil Palm Lumber (OPL) / Mazlin Kusin … [et al.]. (2016) In: KONAKA Konferensi Akademik 2016 Pengkongsian Ilmu Dari Perspektif Islam, 30 November 2016, UiTM PAHANG.

Oriented strand board from rubberwood and juvenile sentang / Suffian, M … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

International gaharu trade and its implication on harvesting to the local communities / Mohd Parid M and Lim. H.F. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of bio-composite product from acacia strand and coconut veneer / Siti Nadrah M. Omar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Screw-withdrawal properties of batai (Parensenthes falcataria) particleboard / Safura Mamat, Nurrohana Ahmad and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Machining properties of 25 and 50 year old treated oil palm lumber / Muhamad Hafiz Md Saad and Ahmad Fauzi Awang@Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Multifunction rack made from kelempayan (neolamarkia cadamda) / Mohammad Faize Moftar, Nur Hannani Abdul Latif and Nik Hazlan Nik Hashim. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Influence of the oil palm trunk and acacia mangium on the particleboard Properties / Abdul Hakim Baihaqi Mohamad Noor, Zaimatul Aqmar Abdullah and Said Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Physical properties of Kelempayan (Neomalarckia cadamba sp.) wood / Nur Sakinah Mohamed Tamat …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of thermoplastic composite using sesendok and kelempayan sawdust at different filler loading of polypropylene / Noorshashilawati Azura Mohammad … [et al.]. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Some factors influencing the amount of fines for forest offenses / Rusli Mohd and Nik Suryana Nik Mat. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of acacia mangium wcb in relation to particle size and additives (Na2Si03) / Mohamad Alif Aizat Mohd Azhar …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Effect of resin content and density on the properties three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta and Jamaludin Kasim. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Adhesion of finishing material: Influence of timber species and coating layers / Mohamad Alif Mohd Yazied and Amran Shafie. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Effect of resin content and species on the properties of particleboard from leuceana spp and rubberwood / Mohd Aizuddin Mohd Yusoff and Wan Mohd Nazri Wan Abd. Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Bending strength of finger joint from kelempayan (neomalarkia cadamba) and ludai (sapium baccatum) / Nik Amirul Fadzil Mokhtar and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Sifat fizikal dan struktur kayu: keunikan kayu dan keagungan tuhan / Suhaimi Muhammed and Rudaini Mohd Nawawi. (2005) In: Prosiding KONAKA Konferensi Akademik 2005, 13 -15 Disember 2005, UiTM PAHANG.

Kajian perbandingan anatomi daun bagi beberapa spesies shorea roxb., hopea roxb., dan vatica linn. (dipterocarpaceae) / Nor Lailatul Wahidah Musa and Liliwirianis Nawi. (2012) In: Prosiding KONAKA 2012, 5 - 6 November 2012, Gambang Resort, Kuantan, Pahang.

Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh …[et al.]. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Adhesive wettabillty of four Malaysian wood species / Kamarulzaman Nordin, Mansur Ahmad and Suhaini Ali. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Developing environmentally friendly furniture through life cycle analysis / Kamarulzaman Nordin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Optimizing log supply from timber concession complex, Dungun, Terengganu to their subsidiaries down stream processing mills using linear programming model / Ahmad Fauzi Puasa, Mohd Shahwahid Othman and Amir Abdul Nasir Shaari. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core. / Syed Muhammad Azlan Sayed Idrus, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Strength properties of t-shaped joint members from kelempayan wood / Asnawi Seraila and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Influence of particle sizes on homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila and Shaikh Abdul Karim Yamani Zakaria. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Decay resistance between sapwood and heartwood of parashorea malaanonan / Mahmud Sudin and Razak Wahab. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan / Tuan Mohd Fakrul Razie Tuan Ismail and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Laminated bamboo: alternative material of the future / Razak Wahab … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Potential forest plantation species: Leucaena leucocephala / Wan Mohd Nazri Wan Abd Rahman …[et al.]. (2009) In: UNSPECIFIED.

Effect of diameter and log shape on the veneer recovery rate in a plywood plant / Wan Mohd Nazri Wan Abdul Rahman and Mohd Ariff Jamaludin. (2004) In: STSS 2004 : SAINS TEKNOLOGI JILID 1, 31 MEI – 1 JUN 2004, HOTEL VISTANA, KUANTAN, PAHANG.

Early assessment: Trial plot study of leucaena lueucocephala / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Mechanical properties of oriented strand board from kelempayan wood at different resin content / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Prefabricated wood i-joist: araucaria hunsteinii flanges and oriented strand board web with l-butt joint / Wan Mohd Nazri Wan Abdul Rahman … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Application of biotechnology: evaluation of improved-quality planting materials for forest plantation species / Ahmad Zuhaidi Yahya …[et al.]. (2006) In: Volume No. 1: Science and Technology, 30 – 31 May 2006, Swiss Garden Resort & Spa Kuantan, Pahang.

Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of laminated veneer lumber from oil palm trunk veneer using different adhesives / Muhammad Najib Yusoff, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Thesis

Physical and mechanical properties of particleboard made from selected fast-growing species using different resin content: a review / Hannani Abd Haris. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

A preliminary study on the recovery of 40 to 50 years coconut trunk (Cocos nucifera) / Nurfaizah Abd Latib. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Resin river clear blue inlay wall mounted folding table / Ahmad Tarmizi Abd Mohksin. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Anatomical (Fibers) features of selected underutilized species related to solid wood bending / Norshuhadaniza Abdul Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Evaluation of selected timber properties using dielectric constant by low frequency techniques / Rohana Hassan. (2006) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Ultimate strength of timber column / Mahiran Md. Noh. (1996) Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).

Anatomical properties of 5 and 10 years old Sentang (Azadirachta excelsa) / Martini Mohamad. (1998) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

A study on the effects of particle sizes on physical and mechanical properties of particleboard on lesser-known species: a review / Nur Ain Farhana Mohd Asri. (2021) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Effect of oven and microwave treatment on physico mechanical properties of kelempayan (Neolamarckia cadamba) / Maryam Mohd Radzi. (2023) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Modelling of above ground biomass (AGB), stand volume and carbon stocks of eucalyptus plantations using worldview-2 imagery in Sabah, Malaysia / Ahmad Farid Mohsin. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Historic timber repair works (HTRW) framework for heritage building conservation in Malaysia / Afzanizam Muhammad. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Tensile strength class system for Malaysian hardwoods according to European standards EN 384 and EN 408 / Nurul Izzatul Lydia Za‘Ba. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. (2015) [Student Project] (Unpublished)

Preliminary study on the physical and mechanical properties of gypsum- sawdust board / Muhammad Al Amin Abdul Hamid, Roslee Mohammad Rais and Muhammad Yassar Salleh. (2011) [Student Project] (Unpublished)

Properties of finger joint by different alignment and species / Rizal Shafuan Abdull Rani. (2014) [Student Project] (Unpublished)

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah. (2015) [Student Project] (Unpublished)

Properties of wood plastic composites (WPC) from Batai spp. (Paraserianthes falcataria) / Nor Hidayani Abdullah. (2012) [Student Project] (Unpublished)

Upholstered storage bench from waste timber / Siti Anisah Arshad. (2014) [Student Project] (Unpublished)

The effect of different filler loading and types of filler on the mechanical and physical properties of wood plastic composite from sapium baccatum (Ludai sp.) / Nurul Najwa Hamis. (2019) [Student Project] (Unpublished)

Behaviour of timber beams of different species under pure bending and pure torsion / Nordin Hassan. (1981) [Student Project] (Unpublished)

'Tricle' epoxy coffee table from light hardwood / Nor Iryani Ibrahim. (2020) [Student Project] (Unpublished)

Hidden storage side table / Muhd Faiz Ismail. (2020) [Student Project] (Unpublished)

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (Endospermum diadenum)/ Zilawati Kamal. (2011) [Student Project] (Unpublished)

Properties of particleboard produce from hybrid of Ludai and Kelempayan / Nur Mardiatul Fitriah Kamaruddin. (2019) [Student Project] (Unpublished)

Properties of wood cement board (WCB) made from Sentang (Azadirachta excelsa) particles / Iffah Izzah Maidin. (2012) [Student Project] (Unpublished)

Effect of alkaline percentages on wood plastic composites properties / Muhammad Nabil Irsyad Masir. (2015) [Student Project] (Unpublished)

Machining properties of treated oil palm lumber (elaeis guineensis jacq.) / Syazana Mat Saipuddin. (2014) [Student Project] (Unpublished)

Finishing performance of acid catalyst lacquer on (Neobalanocarpus hemii) using different systems and different viscosity / Marini Mazlan. (2019) [Student Project] (Unpublished)

Machining properties of 25 and 50 years old treated oil palm lumber / Muhamad Hafiz Md Saad. (2015) [Student Project] (Unpublished)

Survey on local sale and consumption of sawn timber (Kuching region) / Mohamad Meramit. (2004) [Student Project] (Unpublished)

Side table with reflected lamp / Muhammad Bukhari Mohamad Nadzrin. (2020) [Student Project] (Unpublished)

Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. (2015) [Student Project] (Unpublished)

Properties of particle board made from Batai (Paraserianthes falcataria) using phenol formaldehyde / Siti Ainatul Mardhiah Mohd Hata and Siti Khairoh Hassan. (2011) [Student Project] (Unpublished)

Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. (2015) [Student Project] (Unpublished)

Finishing properties of acid catalyst lacquer on Kelempayan (Neomalarckia cadamba) and Sesenduk (Endospermum sp) / Najwaa Mohd Sah. (2014) [Student Project] (Unpublished)

Performances of nitrocellulose lacquer and acid catalyst lacquer on giam (Hopea spp.) / Izzattie Mohd Saluji. (2019) [Student Project] (Unpublished)

Malaysian hardwood timbers: adhesion of finishing material from different timber species and under coating layers / Mohamad Alif Mohd Yazied. (2012) [Student Project] (Unpublished)

Dendrocalamus asper (Buluh Betong) as raw material to manufacture wood plastic composite (WPC) / Nur Farhana Mohd Zailani. (2013) [Student Project] (Unpublished)

Smart coffee table from wooden pallet / Muhamad Aminuddin Mokhtar. (2020) [Student Project] (Unpublished)

Butterfly inspired foldable table / Nurul Manisa Muhamad Saupi. (2019) [Student Project] (Unpublished)

Properties of oriented strand board using a combination species from rubberwood and kelempayan / Iskandar Mustapa. (2014) [Student Project] (Unpublished)

The dimensional stability properties of Kedondong senggeh (Canarium psedosumalranum) / Ahmad Badrul Hisyam Omar, Mohamad Alif Aizat Mohd Azhar and Muhammad Shafiq Hassan. (2011) [Student Project] (Unpublished)

Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman. (2013) [Student Project] (Unpublished)

Anatomical, physical and mechanical properties of leucaena leucocephala wood / Mohd Hanif Othman. (2011) [Student Project] (Unpublished)

Physical and mechanical properties of oil palm lumber / Muhammad Azizul Radhi. (2012) [Student Project] (Unpublished)

Properties of wood plastic composite from azadirachta excels / Nur Balqis Ashraf Ramly. (2012) [Student Project] (Unpublished)

Marble inspired coffee table / Athirah Izzati Razak. (2020) [Student Project] (Unpublished)

Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of nine years old kelempayan / Hazman Raziq Salikin. (2019) [Student Project] (Unpublished)

Height and diameter growth of latex timber clone rubberwood / Suhaizul Salleh. (2005) [Student Project] (Unpublished)

Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. (2015) [Student Project] (Unpublished)

Properties of particleboard from Petai Belalang and Kelempayan / Nur Nadira Usop. (2019) [Student Project] (Unpublished)

Finishing properties of pine species from wood pallet by using nitrocellulose lacquer with different finishing systems and grits of abrasive paper / Nur Asyikin Wahab. (2019) [Student Project] (Unpublished)

Development of television rack from off-cut timber / Wan Jamalludin Wan Omar, Khairul Suhaimi Jusoh and Mohd Arshad Azmi. (2011) [Student Project] (Unpublished)

Strength of wood dowel from Mersawa, Kedondong Bulan and Kedondong Sengeh in UiTM forest / Wan Muhamad Farhan Wan Yusoff, Aizuddin Arif Abdul Ghani and Muhamad Faiz Mahmood. (2011) [Student Project] (Unpublished)

Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. (2015) [Student Project] (Unpublished)

Properties of hybrid particleboard produce from acacia and ludai / Nurul Nadjwa Zainuddin. (2019) [Student Project] (Unpublished)

Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. (2015) [Student Project] (Unpublished)