Items where Subject is "Malaysia"

A

A.Rahim, Muhamad Amir Hamzah and Mohammad, Noorshashillawati Azura (2011) Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Ab Hamid, Atikah (2015) Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. (2015) [Student Project] (Unpublished)

Ab. Manan, Mohd Yusmizan and Awang @Othman, Ahmad Fauzi (2015) Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Abd. Samad, Norini (2002) Forest plantation in peninsular Malaysia / Norini Abd. Samad. (2002) [Student Project] (Unpublished)

Abdul Rahman, Norshuhadaniza (2010) Anatomical (Fibers) features of selected underutilized species related to solid wood bending / Norshuhadaniza Abdul Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Abdullah, Mohd Faiza (2003) Log recovery and shrinkage properties of known species/ Mohd Faiza Abdullah. (2003) [Student Project] (Unpublished)

Abdullah, Muhamad Azlan and Awang@Othman, Ahmad Fauzi and Mohd Mokhtar, Izyan Lyana (2015) Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Abdullah Khir, Azizul Arifin and Kasim, Jamaludin and Wan Abd Rahman, Wan Mohd Nazri (2012) Properties of particleboard from kenaf (hibiscus cannabinus l.) core and acacia (acacia mangium) wood / Azizul Arifin Abdullah Khir, Jamaludin Kasim and Wan Mohd Nazri Wan Abd Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Ad Rahman, Mohd Khusaini (2002) Saw milling of rubberwood (Hevea brasiliensis): in peninsular Malaysia / Mohd Khusaini Ad Rahman. (2002) [Student Project] (Unpublished)

Ahmad, Nurrohana (2003) Registration and license export issued by Malaysian Timber Industry Board (MTIB) / Nurrohana Ahmad. (2003) [Student Project] (Unpublished)

Ahmad, Zakiah and Mohd Noh, Mohd Salleh and Md Tahir, Paridah and P.S, Eric (2002) Tensile strength behavior of laminated veneer lumber / Zakiah Ahmad … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Ahmad Jamaluddin, Khairuddin (2001) Sawmill industries in peninsular Malaysia: growth and development from 1990 to 1999 / Khairuddin Ahmad Jamaluddin. (2001) [Student Project] (Unpublished)

Ashraf Ramly, Nur Balqis and Ahmad Zaki, Junaiza (2012) Properties of wood plastic composite from azadirachta excelsa using different percentage of sawdust / Nur Balqis Ashraf Ramly and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Awang Rani, Syaiedeen (2013) Finishing properties of oil based paint on wood surfaces from two hardwood species / Syaiedeen Awang Rani. (2013) [Student Project] (Unpublished)

Azmy, Mohd Ruzaimy (2007) Beetle infestation on Malaysian timber / Mohd Ruzaimy Azmy. (2007) [Student Project] (Unpublished)

C

Che Harun, Mohd Aminuddin Che Harun and Jamaludin, Mohd Azli and Marzuki, Khairunna'im and Raja Othman, Raja Syamsuzzaman (2007) Physical and mechanical properties of juvenile mahogany / Mohd Aminuddin Che Harun … [et al.]. (2007) [Student Project] (Unpublished)

Che Rosli, Mohd Aizuddin and Wan Abd Rahman, Wan Mohd Nazri (2011) Mechanical and physical properties of oriented strand board from kelempayan wood / Mohd Aizuddin Che Rosli and Wan Mohd Nazri Wan Abd Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

G

Ghazali, Mohd Khuzairi (2005) Timber drying / Mohd Khuzairi Ghazali. (2005) [Student Project] (Unpublished)

H

H., Norini (2002) Malaysian forest-based industries in the global economy / H. Norini. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

H., Norini (2004) The roles of timber and non timber resources in the sustainable development of forest-based industries in peninsular Malaysia / H. Norini. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Haris, Zainab and Wan Abdul Rahman, Wan Mohd Nazri and Mohd Yunus, Nor Yuziah and Johari, Nur Atiqah Nabilah and Razali, Nur Amalina (2015) Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Hashim, Muhamad Faizal (2000) Kiln drying of timber in peninsular Malaysia : a review / Muhamad Faizal Hashim. (2000) [Student Project] (Unpublished)

Hassan, Khalilah and Harun, Siti Norlizaiha and Md Sakip, Siti Rasidah (2018) Unmanned Aerial Vehicle (UAV) for heritage tree detection / Khalilah Hassan, Siti Norlizaiha Harun and Siti Rasidah Md Sakip. (2018) In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.

Hassan, Rohana and Ibrahim, Azmi and Ahmad, Zakiah (2008) Bending behaviour of dowelled mortise and tenon joints in Kempas / Rohana Hassan, Azmi Ibrahim and Zakiah Ahmad. (2008) Scientific Research Journal, 5 (1). pp. 1-11. ISSN 1675-7009

I

Ismail, Affizi and Ismail, Mohd Shafiq (2007) The distribution of leguminosae timber species in UiTM Jengka forest reserve / Affizi Ismail and Mohd Shafiq Ismail. (2007) [Student Project] (Unpublished)

Ismail, Mohammad Fahamy and Sarmin, Siti Noorbaini and Idris, Ahmad Sardey (2011) Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Ismail, Noor Rehan and Sarmin, Siti Noorbaini and Kasim, Jamaludin (2011) Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

J

Jaafar, Ahmad (1985) Problems relating to the export of Peninsular Malaysia main primary commodities / Ahmad Jaafar. (1985) [Student Project] (Unpublished)

Jaafar, Ahmed Azhar and Kasiran, Norman and Muhammed, Suhaimi and Wan Ismail, Wan Hanisah (2004) The integration of plantation crops with timber species in Malaysia / Ahmed Azhar Jaafar ... [et al.]. (2004) Science Letters, 1 (1). pp. 57-63. ISSN 1675-7785

Jamaludin, Mohd Ariff and Hong, Yan Leng and Bokhari, Semsolbahri and Midon, Shokari and Nordin, Kamamlzaman and Ahmad, Mansur (2004) Using computer simulation to study the dynamics of moisture distribution in wood / Mohd Ariff Jamaludin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Jemain, Nur Ain and Abdul Latif, Nur Hannani and Ahmad Zaki, Junaiza (2012) Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Johar, Shuhaila and Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin (2012) Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Johari, Khairul Azhar and Kasim, Jamaludin and Wan Abdul Rahman, Wan Mohd Nazri (2012) Properties of particleboard from admixture of petai belalang (leucaena leucocephala) and kenaf core (hibiscus cannabinus l.) particles / Khairul Azhar Johari, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Julie, Diana and Ahmad, Nurrohana (2015) Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

K

Kamal, Zilawati and Mahmud, Siti Zalifah (2011) Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (endospermum diadenum) wood / Zilawati Kamal and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Kasim, Jamaludin and Firdaus, Muhammad Adib and Ahmad, Nurrohana and Wan Abdul Rahman, Wan Mohd Nazri (2014) Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Kibat, Silverina Anabelle and Ngelambong, Anderson and Tabak, Vickson E (2019) Can forest conservation and logging activities be reconciled for sustainable future? A case of Deramakot Forest Reserve in Borneo / Silverina Anabelle Kibat, Anderson Ngelambong and Vickson E Tabak. (2019) ESTEEM Journal of Social Sciences and Humanities, 3 (Nov): 8. pp. 80-87. ISSN 2600-7274

M

M. Zainal, Siti Aminah and Abraham, Siti Nurashikin and Wan Mohd @ Wan Mohd Nawi, Wan Shamsyila (2008) The distribution of meranti timber species in UiTM Jengka forest reserve / Siti Aminah M. Zainal, Siti Nurashikin Abraham and Wan Shamsyila Wan Mohd @ Wan Mohd Nawi. (2008) [Student Project] (Unpublished)

Mamat, Mariani (2002) Prefabricated wood i-joist from Laminated Veneer Lumber (LVL) flange and LVL parallel web / Mariani Mamat. (2002) [Student Project] (Unpublished)

Marzuki, Mazlinda and Abdullah, Zaimatul Aqmar and Kasim, Jamaludin and Ahmad, Said (2015) Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Mohamad, Mohamad Sahadi (2005) Forest plantation development in Malaysia and the potential of rubberwood as an important source of timber in the future / Mohamad Sahadi Mohamad. (2005) [Student Project] (Unpublished)

Mohamed Tamat, Nur Sakinah and Abd Latib, Nurfaizah and Misfar, Siti Nadzirah and Kasim, Jamaludin (2011) Physical properties of Kelempayan (Neomalarckia cadamba sp.) wood / Nur Sakinah Mohamed Tamat …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Mohd Hamidi, Fathin Shahirah (2015) Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. (2015) [Student Project] (Unpublished)

Mohd Hatta, Abdul Halim (2015) Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. (2015) [Student Project] (Unpublished)

Mohd Hatta, Abdul Halim and Kasim, Jamaludin (2015) Effect of resin content and density on the properties three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta and Jamaludin Kasim. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Mohd Razali, Safini (2001) Acceptable of Malaysian furniture in overseas market / Safini Mohd Razali. (2001) [Student Project] (Unpublished)

Mohd Yazied, Mohamad Alif (2012) Malaysian hardwood timbers: adhesion of finishing material from different timber species and under coating layers / Mohamad Alif Mohd Yazied. (2012) [Student Project] (Unpublished)

Mohd Yazied, Mohamad Alif and Shafie, Amran (2012) Adhesion of finishing material: Influence of timber species and coating layers / Mohamad Alif Mohd Yazied and Amran Shafie. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mohd Yusoff, Mohd Aizuddin and Wan Abd. Rahman, Wan Mohd Nazri (2011) Effect of resin content and species on the properties of particleboard from leuceana spp and rubberwood / Mohd Aizuddin Mohd Yusoff and Wan Mohd Nazri Wan Abd. Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Muhammed, Suhaimi and Wan Abdul Majid, Wan Mahmood (1999) The performance of Kempas and Keruing in structural finger jointing / Suhaimi Muhammed and Wan Mahmood Wan Abdul Majid. (1999) GADING Jurnal UiTM Cawangan Pahang, 5 (2): 3. pp. 26-38. ISSN 0128-5599

N

Nordin, Kamarulzaman and Ahmad, Mansur and Ali, Suhaini (2002) Adhesive wettabillty of four Malaysian wood species / Kamarulzaman Nordin, Mansur Ahmad and Suhaini Ali. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

P

Paul Sajep, Dora (2001) Properties and characteristics of Tualang (Koompassia excelsa) in Sarawak / Dora Paul Sajep. (2001) [Student Project] (Unpublished)

R

Ramly, Nur Balqis Ashraf (2012) Properties of wood plastic composite from azadirachta excels / Nur Balqis Ashraf Ramly. (2012) [Student Project] (Unpublished)

S

Said, Azlan (2005) A study on the relationship between forex rate, timber export and production volume of timber with prices performance of Malaysia timber / Azlan Said. (2005) [Research Reports] (Unpublished)

Sakiman, Mohammad Akhmal (2015) Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. (2015) [Student Project] (Unpublished)

Salikin, Hazman Raziq (2019) Physical and mechanical properties of nine years old kelempayan / Hazman Raziq Salikin. (2019) [Student Project] (Unpublished)

Sayed Idrus, Syed Muhammad Azlan and Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin (2012) Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core. / Syed Muhammad Azlan Sayed Idrus, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Seraila, Asnawi and Mahmud, Siti Zalifah (2011) Strength properties of t-shaped joint members from kelempayan wood / Asnawi Seraila and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Seraila, Azlan (2015) Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. (2015) [Student Project] (Unpublished)

Sudin, Mahmud and Wahab, Razak (2004) Decay resistance between sapwood and heartwood of parashorea malaanonan / Mahmud Sudin and Razak Wahab. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Suod, Zaida and Mohd Fuzai, Norfazuinda and Lazim, Nurzawani (2006) Timber disease in forest plantation / Zaida Suod, Norfazuinda Mohd Fuzai and Nurzawani Lazim. (2006) [Student Project] (Unpublished)

Suratman, Nur Othman and Wan Abdul Rahman, Wan Mohd Nazri and Mohd Yunus, Nor Yuziah and Razali, Nur Amalina (2015) Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

T

Tapak, Mohd Khairul Nizam and Wan Abdul Rahman, Wan Mohd Nazri and Sarmin, Siti Noorbaini and Idris, Ahmad Sardey (2011) Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Tuan Soh, Tuan Fauzi (2003) Development of forest management in peninsular Malaysia / Tuan Fauzi Tuan Soh. (2003) [Student Project] (Unpublished)

W

Wan Abd Rahman, Wan Mohd Nazri and Kasim, Jamaludin and Mohd Sahal, Mohd Saiful Akbar and Khalid, Fairuz (2009) Potential forest plantation species: Leucaena leucocephala / Wan Mohd Nazri Wan Abd Rahman …[et al.]. (2009) In: UNSPECIFIED.

Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin and Ab Rahman, Hilmi and Japarudin, Yani and Anuar, Azhar and Pailing, Mustapha (2010) Early assessment: Trial plot study of leucaena lueucocephala / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Wan Abdul Rahman, Wan Mohd Nazri and Kasim, Jamaludin and Sudin, Rahim (2003) Mechanical properties of oriented strand board from kelempayan wood at different resin content / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Wan Mohd Zain, Wan Zuraida and Latip, Jalifah and M. Syah, Yana and Mat So 'ad, Siti Zaiton (2007) Spectroscopic studies of oligostilbenes from Malaysian dipterocarpaceae / Wan Zuraida Wan Mohd Zain … [et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 69-75. ISSN 0128-5599

Wan Yusoff, Wan Muhamad Farhan and Abdul Ghani, Aizuddin Arif and Mahmood, Muhamad Faiz (2011) Strength of wood dowel from Mersawa, Kedondong Bulan and Kedondong Sengeh in UiTM forest / Wan Muhamad Farhan Wan Yusoff, Aizuddin Arif Abdul Ghani and Muhamad Faiz Mahmood. (2011) [Student Project] (Unpublished)

Y

Yamani, Shaikh Abdul Karim and Kasim, Jamaludin and Abdul Jalil, Ashaari (2007) Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599

Yusof, Suraya and Ahmad Zaki, Junaiza (2014) Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Z

Zahari, Mohd Haziq Zulfadhli (2015) Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. (2015) [Student Project] (Unpublished)

Zamil, Armi Suzana (1991) Timber shipment in containers: packaging and stuffing of sawntimber, plywood and mouldings / Armi Suzana Zamil. (1991) [Student Project] (Unpublished)

Zawil Anuar, Muhammad Zahid Akmal (2015) Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. (2015) [Student Project] (Unpublished)