Items where Subject is "Malaysia"

Article

Bending behaviour of dowelled mortise and tenon joints in Kempas / Rohana Hassan, Azmi Ibrahim and Zakiah Ahmad. (2008) Scientific Research Journal, 5 (1). pp. 1-11. ISSN 1675-7009

The integration of plantation crops with timber species in Malaysia / Ahmed Azhar Jaafar ... [et al.]. (2004) Science Letters, 1 (1). pp. 57-63. ISSN 1675-7785

Can forest conservation and logging activities be reconciled for sustainable future? A case of Deramakot Forest Reserve in Borneo / Silverina Anabelle Kibat, Anderson Ngelambong and Vickson E Tabak. (2019) ESTEEM Journal of Social Sciences and Humanities, 3. pp. 80-87. ISSN 2600-7274

The performance of Kempas and Keruing in structural finger jointing / Suhaimi Muhammed and Wan Mahmood Wan Abdul Majid. (1999) GADING Jurnal UiTM Cawangan Pahang, 5 (2): 3. pp. 26-38. ISSN 0128-5599

Spectroscopic studies of oligostilbenes from Malaysian dipterocarpaceae / Wan Zuraida Wan Mohd Zain … [et al.]. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 69-75. ISSN 0128-5599

Effects of board density and resin content on the strength and dimensional properties of particleboard from Kelempayan (Anthocephalus Chinensis) / Shaikh Abdul Karim Yamani, Jamaludin Kasim and Ashaari Abdul Jalil. (2007) Jurnal Gading UiTM Pahang, 11 (1). pp. 39-45. ISSN 0128-5599

Conference or Workshop Item

Effect of strand sizes and resin on oriented strand board using kelempayan (Neolamarckia cadamba) / Muhamad Amir Hamzah A.Rahim and Noorshashillawati Azura Mohammad. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab. Manan and Ahmad Fauzi Awang @ Othman. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Physical and mechanical properties of oil palm trunks / Muhamad Azlan Abdullah, Ahmad Fauzi Awang@Othman and Izyan Lyana Mohd Mokhtar. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of particleboard from kenaf (hibiscus cannabinus l.) core and acacia (acacia mangium) wood / Azizul Arifin Abdullah Khir, Jamaludin Kasim and Wan Mohd Nazri Wan Abd Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Tensile strength behavior of laminated veneer lumber / Zakiah Ahmad … [et al.]. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of wood plastic composite from azadirachta excelsa using different percentage of sawdust / Nur Balqis Ashraf Ramly and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of oriented strand board from kelempayan wood / Mohd Aizuddin Che Rosli and Wan Mohd Nazri Wan Abd Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Malaysian forest-based industries in the global economy / H. Norini. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

The roles of timber and non timber resources in the sustainable development of forest-based industries in peninsular Malaysia / H. Norini. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of Oriented Strand Board (OSB) from acacia mangium and rubberwood / Zainab Haris …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Unmanned Aerial Vehicle (UAV) for heritage tree detection / Khalilah Hassan, Siti Norlizaiha Harun and Siti Rasidah Md Sakip. (2018) In: 3rd International Conference on Rebuilding Place (ICRP2018), 13-14 September 2018, Impiana Hotel, Ipoh, Perak, Malaysia.

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Using computer simulation to study the dynamics of moisture distribution in wood / Mohd Ariff Jamaludin … [et al.]. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Finishing properties of a particleboard / Nur Ain Jemain, Nur Hannani Abdul Latif and Junaiza Ahmad Zaki. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard produced from admixture of acacia mangium and sentang / Shuhaila Johar, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Properties of particleboard from admixture of petai belalang (leucaena leucocephala) and kenaf core (hibiscus cannabinus l.) particles / Khairul Azhar Johari, Jamaludin Kasim and Wan Mohd Nazri Wan Abdul Rahman. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Mechanical and physical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust / Diana Julie and Nurrohana Ahmad. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Characterization of finishing with acid catalyst lacquer and nitrocellulose lacquer on sesenduk (endospermum diadenum) wood / Zilawati Kamal and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim …[et al.]. (2014) In: Prosiding KONAKA Konferensi Akademik 2014, 28 Oktober 2014, UiTM PAHANG.

Properties of particleboard made from rice husk and coconut husk in relation of varying resin content and board density / Mazlinda Marzuki …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Physical properties of Kelempayan (Neomalarckia cadamba sp.) wood / Nur Sakinah Mohamed Tamat …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Effect of resin content and density on the properties three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta and Jamaludin Kasim. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Adhesion of finishing material: Influence of timber species and coating layers / Mohamad Alif Mohd Yazied and Amran Shafie. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Effect of resin content and species on the properties of particleboard from leuceana spp and rubberwood / Mohd Aizuddin Mohd Yusoff and Wan Mohd Nazri Wan Abd. Rahman. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Adhesive wettabillty of four Malaysian wood species / Kamarulzaman Nordin, Mansur Ahmad and Suhaini Ali. (2002) In: Prosiding Seminar Kebangsaan Sains,Teknologi dan Sains Sosial “Ke Arah Pembangunan Negara”, 27 dan 28 Mei 2002, Hotel Vistana, Kuantan, Pahang.

Properties of particleboards made from rubberwood (hevea brasiliensis) and kenaf (hibiscus cannabinus l.) core. / Syed Muhammad Azlan Sayed Idrus, Wan Mohd Nazri Wan Abdul Rahman and Jamaludin Kasim. (2012) In: Seminar on Wood Materials and Furniture Technology, 25 June 2012, UiTM PAHANG.

Strength properties of t-shaped joint members from kelempayan wood / Asnawi Seraila and Siti Zalifah Mahmud. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Decay resistance between sapwood and heartwood of parashorea malaanonan / Mahmud Sudin and Razak Wahab. (2004) In: STSS 2004 : Sains Teknologi Jilid 1, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang.

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman …[et al.]. (2015) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak …[et al.]. (2011) In: Proceedings of Seminar on Wood Science and Furniture Technology, 11-12 May 2011, UiTM PAHANG.

Potential forest plantation species: Leucaena leucocephala / Wan Mohd Nazri Wan Abd Rahman …[et al.]. (2009) In: UNSPECIFIED.

Early assessment: Trial plot study of leucaena lueucocephala / Wan Mohd Nazri Wan Abdul Rahman …[et al.]. (2010) In: Prosiding KONAKA Konferensi Akademik 2010, 8-9 Disember 2010, UiTM PAHANG.

Mechanical properties of oriented strand board from kelempayan wood at different resin content / Wan Mohd Nazri Wan Abdul Rahman, Jamaludin Kasim and Rahim Sudin. (2003) In: Prosiding KONAKA Konferensi Akademik 2003, 5-7hb Disember 2003, Holiday Villa Cherating, Kuantan.

Finishing properties of Japanese table by using Kelempayan (Neolamarckia cadamba) / Suraya Yusof and Junaiza Ahmad Zaki. (2014) In: Proceedings of Seminar on Wood Science and Furniture Technology (WASFT 2014), 23 December 2014, UiTM PAHANG.

Thesis

Anatomical (Fibers) features of selected underutilized species related to solid wood bending / Norshuhadaniza Abdul Rahman. (2010) Degree thesis, thesis, Universiti Teknologi MARA Pahang.

Student Project

Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. (2015) [Student Project] (Unpublished)

Finishing properties of oil based paint on wood surfaces from two hardwood species / Syaiedeen Awang Rani. (2013) [Student Project] (Unpublished)

Problems relating to the export of Peninsular Malaysia main primary commodities / Ahmad Jaafar. (1985) [Student Project] (Unpublished)

Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. (2015) [Student Project] (Unpublished)

Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. (2015) [Student Project] (Unpublished)

Malaysian hardwood timbers: adhesion of finishing material from different timber species and under coating layers / Mohamad Alif Mohd Yazied. (2012) [Student Project] (Unpublished)

Properties of wood plastic composite from azadirachta excels / Nur Balqis Ashraf Ramly. (2012) [Student Project] (Unpublished)

Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. (2015) [Student Project] (Unpublished)

Physical and mechanical properties of nine years old kelempayan / Hazman Raziq Salikin. (2019) [Student Project] (Unpublished)

Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. (2015) [Student Project] (Unpublished)

Strength of wood dowel from Mersawa, Kedondong Bulan and Kedondong Sengeh in UiTM forest / Wan Muhamad Farhan Wan Yusoff, Aizuddin Arif Abdul Ghani and Muhamad Faiz Mahmood. (2011) [Student Project] (Unpublished)

Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. (2015) [Student Project] (Unpublished)

Timber shipment in containers: packaging and stuffing of sawntimber, plywood and mouldings / Armi Suzana Zamil. (1991) [Student Project] (Unpublished)

Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. (2015) [Student Project] (Unpublished)

Research Reports

A study on the relationship between forex rate, timber export and production volume of timber with prices performance of Malaysia timber / Azlan Said. (2005) [Research Reports] (Unpublished)